This document provides instructions for a tutorial on getting started with AutoCAD software. It lists several mechanical components - an M-Block, Filler, Shim, Link, Pivot Arm, Shaft Bracket, Block, Center support, and Gasket - that students are to create fully dimensioned drawings of using AutoCAD. Tutors are to select 3-4 problems to evaluate students on and the rest for students to practice with.
This document provides instructions for a tutorial on getting started with AutoCAD software. It lists several mechanical components - an M-Block, Filler, Shim, Link, Pivot Arm, Shaft Bracket, Block, Center support, and Gasket - that students are to create fully dimensioned drawings of using AutoCAD. Tutors are to select 3-4 problems to evaluate students on and the rest for students to practice with.
This document provides instructions for a tutorial on getting started with AutoCAD software. It lists several mechanical components - an M-Block, Filler, Shim, Link, Pivot Arm, Shaft Bracket, Block, Center support, and Gasket - that students are to create fully dimensioned drawings of using AutoCAD. Tutors are to select 3-4 problems to evaluate students on and the rest for students to practice with.
Tutorial No. 1 (Part A) (Getting started Auto CAD) Note: (Time: 1 Hour 40 minutes each) Tutors to select three to four representative problems to be covered in the Auto CAD evaluation sessions. Tutors to select rest of the problems to be covered in the practice sessions.
Create and fully dimension the drawing of the following components
M-Block Filler
Shim Link
Pivot Arm Shaft Bracket
MECHANICAL ENGINEERING DEPARTMENT Course No.: UES101 Course Title: ENGG. DRAWING