The document provides instructions for a tutorial on engineering drawing using AutoCAD. It lists several mechanical components - an M-Block, Filler, Shim, Link, Pivot Arm, Shaft Bracket, Block, Center support, and Gasket - and instructs students to create fully dimensioned drawings of each component in AutoCAD during the 1 hour and 40 minute tutorial. Tutors are asked to select 3-4 problems to evaluate students on and the rest for students to practice.
The document provides instructions for a tutorial on engineering drawing using AutoCAD. It lists several mechanical components - an M-Block, Filler, Shim, Link, Pivot Arm, Shaft Bracket, Block, Center support, and Gasket - and instructs students to create fully dimensioned drawings of each component in AutoCAD during the 1 hour and 40 minute tutorial. Tutors are asked to select 3-4 problems to evaluate students on and the rest for students to practice.
The document provides instructions for a tutorial on engineering drawing using AutoCAD. It lists several mechanical components - an M-Block, Filler, Shim, Link, Pivot Arm, Shaft Bracket, Block, Center support, and Gasket - and instructs students to create fully dimensioned drawings of each component in AutoCAD during the 1 hour and 40 minute tutorial. Tutors are asked to select 3-4 problems to evaluate students on and the rest for students to practice.
Tutorial No. 1 (Part A) (Getting started Auto CAD) Note: (Time: 1 Hour 40 minutes each) • Tutors to select three to four representative problems to be covered in the Auto CAD evaluation sessions. • Tutors to select rest of the problems to be covered in the practice sessions.
Create and fully dimension the drawing of the following components
M-Block Filler
Shim Link
Pivot Arm Shaft Bracket
MECHANICAL ENGINEERING DEPARTMENT Course No.: UTA015 Course Title: ENGG. DRAWING