Professional Documents
Culture Documents
APP.SUPPORT 1HC0036724
SLIDING ±50
APP.SUPPORT 1HC0036724
SLIDING ±50
APP.SUPPORT 1HC0036724
267
267
R11
R2 R3
PTFE 4
PTFE 4
R11
R11
BOLT M16*50 BOLT M16*80 P102
NUT M16, WASHER M16 P102 NUT M16, WASHER M16
P129
1350
TOP VIEW
FRONT VIEW
P129
BOLT M12*40
NUT M12, WASHER M12
5535
5535
P129
X DETAIL Y DETAIL
- -
rt h ing to
NUT M30 - ISO 4032
EARTHING s fo r e a
SCOPE: civil contractor ti n g h o le
D14 Crea fsupport
38
everylego
SPECIAL WASHER - ABB TYPE 2
SCOPE: civil contractor
P129
56mm
PRE-EMBEDDED ANCHOR
ROD M30 - DIN 976
l v an i z ing
SCOPE: civil contractor
i p ga end plate
262
h o t d
g ho l e s for otplate or
SPECIAL WASHER - ABB TYPE 2 Creatinmade in the fo
SCOPE: civil contractor to be
NUT M30 - ISO 4032
R3 SCOPE: civil contractor
R2
R2 D14
15
CONCRETE SLAB
SCOPE: civil contractor
56
1.2 Hot dip galvanized threads to be brushed prior to assembly. materials) have to be assembled by a supplier.
X
- 1.3 Welding to be continuous according to manufacturing request. 1.11 All bolts, nuts, washers and etc (except stainless steel) have to be hot galvanized
Otherwise: EN ISO 3834-1/-2 according to manufacturing notes.
1.4 All welds shall be all around fillet welds unless otherwise noted. Otherwise: 01-TMSS-01
a min = 4 mm unless noted otherwise 2.2 The tightening torque is according to HASV600416.
FRONT VIEW LEFT SIDE VIEW t2 a < max (0,7*t1; 0,7*t2)
2.3 For sliding connections with PTFE-material:
a
- First nut with maximal torque of 0.5% of values of table in document HASV600416.
1.6 Dimensions tolerances for welded construction according to EN ISO 13920-AE. - Second nut with torque according to document HASV600416.
R11
±50
SLIDING
APP.SUPPORT 1HC0069724
P129
R11
P129
R2 R2, R3
R3
NUT M16, WASHER M16
P129
ISO VIEW