Professional Documents
Culture Documents
APP.SUPPORT 1HC0069724
APP.SUPPORT 1HC0069724 APP.SUPPORT 1HC0069724
1150 1150
267
267
R18 R14 R15
R18 R18
BOLT M16*60
P102 NUT M16, WASHER M16 P102
R14
BOLT M16*50 P124
NUT M16, WASHER M16
APP.SUPPORT 1HC0069724
1350
R14 R15
TOP VIEW
FRONT VIEW
BOLT M16*45
NUT M12, WASHER M12
4095
4095
P124
Y DETAIL X DETAIL
- -
o
fo r e a rthing t
g holes
EARTHING
D14 r
C ort e a t i n NUT M30 - ISO 4032
38
everyelgofsupp
SCOPE: civil contractor
SPECIAL WASHER - ABB TYPE 2
P124 SCOPE: civil contractor
a nizing te
60mm
lv PRE-EMBEDDED ANCHOR
g a
ot dip or end pla
262
ROD M30 - DIN 976
s f or h SCOPE: civil contractor
at in g hole e footplate
Cre ade in th
to be m SPECIAL WASHER - ABB TYPE 2
SCOPE: civil contractor
NUT M30 - ISO 4032
D14 SCOPE: civil contractor
15
CONCRETE SLAB
SCOPE: civil contractor
Y 1.1 All steel parts have to be hot galvanized according to manufacturing request.
Otherwise: 01-TMSS-01
1.7 Dimensions tolerances for non-welded construction according to EN ISO 2768-mK.
- 1.8 Material quality according to manufacturing request.
- Minimal layer for holes according to manufacturing request. Otherwise: EN 10025, EN 10219
2
Otherwise: 40 μm / 285 g/m
1.9 Material class according to manufacturing request.
X - Minimal layer for other parts according to manufacturing request. Otherwise: S275JR
- Otherwise: 86 μm / 610 g/m 2
1.10 The additional parts as fasteners, PTFE plates, rollers and etc items in the bill of
1.2 Hot dip galvanized threads to be brushed prior to assembly. materials have to be assembled by a supplier.
P124
1.3 Welding to be continuous according to manufacturing request. 1.11 All bolts, nuts, washers and etc except stainless steel have to be hot galvanized
Otherwise: EN ISO 3834-1/-2 according to manufacturing notes.
Otherwise: 01-TMSS-01
60
60
1.4 All welds shall be all around fillet welds unless otherwise noted.
1.5 Thickness of welding seams: 2 GENERAL ASSEMBLY NOTES
t1 2.1 Damaged zinc layers have to be zinc painted after assembling.
a min 4 mm unless noted otherwise 2.2 The tightening torque is according to HASV600416.
t2 a max 0,7 t1 0,7 t2
2.3 For sliding connections with PTFE-material:
a
- First nut with maximal torque of 0.5 of values of table in document HASV600416.
1.6 Dimensions tolerances for welded construction according to EN ISO 13920-AE. - Second nut with torque according to document HASV600416.
APP.SUPPORT 1HC0069724
APP.SUPPORT 1HC0069724
R18
P124
R14
R18
APP.SUPPORT 1HC0069724
P124
R15
R18
P124
ISO VIEW