Professional Documents
Culture Documents
February 2022
TABLE OF CONTENTS
ATTACHMENT ACCESSORIES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Bobcat Bristles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-9
Loader Water Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Concrete Pump Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-12
Lever Kits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-15
Cutting Edges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-22
Teeth. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23-26, 29-30
Bits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27-28, 39-41
Forestry Cutter Knife Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31-32
Auger Teeth & Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33-35
Bolt-on Rock Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36-38
Hitch and Linkage Pins. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42-43
ELECTRONICS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Beacons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49-50
LED Lights. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51-53
Rear Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
EQUIPMENT ACCESSORIES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
MaxControl. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
MX Depth Check System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Filter & Battery Heaters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58-59
Window Protectors, Vinyl Cab Enclosures & Tractor Canopy . . . . . . . . . . . . . . . . . . . 60-61, 66, 74
Remote Controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62-63
Equipment Shield & Bumpers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64-65
Deluxe Loader Instrument Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Wiper Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Weighlog Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
UTV Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70-73
HYDRAULICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Standoff Springs, Adapters & Couplers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76-79
JOBSITE PRODUCTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Ground Protection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81-83
Hydraulic Hand Tools & Upright Rammer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84-86, 90-91
Rollers and Compactors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87-89
PAINT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
Bobcat Paint. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
Ground Marking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
Paint Restoration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
SEATS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
Available Bobcat Seats & Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157-170
Seat Covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
TELEMATICS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189
Aftermarket Machine IQ Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190
Bobcat Bristles
Durable and long lasting, Bobcat ® bristles offer more hours between changes and are great for
sweeping asphalt, snow, gravel, mill grind, clay, mud and other road debris.
• Available in several sizes to fit Bobcat attachments and many other brands of sweepers and angle brooms.
OD
outside diameter
ID
inside diameter
Bobcat Bristles
• Minimum of 15% more poly than standard bristles. • Polypropylene resin provides
• Virgin polypropylene resin with better “flick action.” better “flick action.”
• Effective debris removal under normal sweeping conditions.
Blue Bristles
PART NO. DESCRIPTION STYLE QTY PART NO. DESCRIPTION STYLE QTY
7194008 6.4 [ID] x 24 [OD] Conical 1 6648797 6.4 [ID] x 21 3/8 [OD] Flat 1
7241793 6.4 [ID] x 21 3/8 [OD] Flat 25 6652802 6.4 [ID] x 21 3/8 [OD] Convoluted 1
7241794 6.4 [ID] x 21 3/8 [OD] Convoluted 25 6672504 10 [ID] x 32 [OD] Flat 1
7241795 10 [ID] x 32 [OD] Flat 25 6672506 10 [ID] x 32 [OD] Convoluted 1
7241796 10 [ID] x 32 [OD] Convoluted 25 6684129 6.4 [ID] x 24 [OD] Convoluted 25
7241797 6.4 [ID] x 24 [OD] Convoluted 25 7409252 8 [ID] x 26 [OD] Convoluted 1
7374437 8 [ID] x 26 [OD] Convoluted 1
Black Bristles
Black Bristles
PART NO. DESCRIPTION STYLE QTY
PART NO. DESCRIPTION STYLE QTY
6989019 6.4 [ID] x 21 3/8 [OD] Convoluted 25
7399759 10 [ID] x 32 [OD] Convoluted 25 6989022 10 [ID] x 32 [OD] Convoluted 25
7399762 6.4 [ID] x 21 3/8 [OD] Convoluted 25
6989025 6.4 [ID] x 24 [OD] Convoluted 25
7409254 8 [ID] x 26 [OD] Convoluted 1
Gutter Brushes
Keep dust, dirt and debris under control with the loader water kit. It is the ideal attachment to pair with the
angle broom, sweeper, planer and vibratory roller attachments when working in residential and urban areas.
• Quick-tach capability.
• Two high-capacity water tanks:
- Tanks can be mounted on uprights or in the cargo bed
- High-capacity tank volume minimizes refilling, maximizes operating time
• On/off switch, conveniently located in the carrier cab.
• Four jet nozzles evenly spray water across width of the attachment.
• Additional mounting kit must be ordered in addition to the water kit. Check OPC for correct size.
Assembly Time
• Water Kit: 3 hours.
• Nozzle Kit: 1 hour.
The Bobcat® concrete pump efficiently pumps concrete to remote work areas. Bobcat carries a complete line
of products to support your dealership in selling and servicing the Bobcat concrete pump and “all makes” of
concrete pumps.
Discharge Hoses
• Fabric reinforced.
Please note:
• Complete “delivery system” for the concrete pump and
components and accessories available through Bobcat sales.
• Individual products contained in the kit are available through
Bobcat Parts.
G AND K-SERIES
Order all the items needed to repair or replace the Bob-Tach® lever assembly under one product number.
Kit enables your service department to perform lever repairs quickly and easily.
#6724776 #6724775
Left Hand Lever Kit Right Hand Lever Kit
Contains the following parts: Contains the following parts:
M-SERIES
Fit M-Series #7427784 – Left Hand Kit #7427784 – Right Hand Kit
400 models. Part # Description Ref. Part # Description Ref.
7277777 Pin 14 7277777 Pin 14
17C652 Bolt 15 17C652 Bolt 15
619021 Washer, 5 2 619021 Washer, 5 2
6578253 Spring 3 6578253 Spring 3
6702903P LH Lever 5 6702904P RH Lever 5
7146538 Pivot 11 7146538 Pivot 11
7252989 Pivot 22 7252989 Pivot 22
6737191 Wedge 9 6737191 Wedge 9
7221255 Spring 7 7221255 Spring 7
85D6 Nut 4 85D6 Nut 4
7255136 Screw 23 7255136 Screw 23
Fit M-Series #7372230 – Left Hand Kit #7372229 – Right Hand Kit
500 – 800 Part # Description Ref. Part # Description Ref.
models.
14J5032 Pin 16 14J5032 Pin 16
17C652 Bolt 17 17C652 Bolt 17
619021 Washer 2 619021 Washer 2
7221255 Spring 7 7221255 Spring 7
6702903P LH Lever 5 6702904P RH Lever 5
7338883 Pivot 11 7338883 Pivot 11
7252989 Pivot 6 7252989 Pivot 6
6737191 Wedge 9 6737191 Wedge 9
6578253 Spring 3 6578253 Spring 3
85D6 Nut 4 85D6 Nut 4
7255136 Screw 8 7255136 Screw 8
R-SERIES
Order all the items needed to repair or replace the Bob-Tach® lever assembly under one product number. Kit
enables your service department to perform lever repairs quickly and easily
#7399871 #7399872
Left Hand Lever Kit Right Hand Lever Kit
Contains the following parts: Contains the following parts:
Part # Description Ref. Part # Description Ref.
14J5032 Pin 15 14J5032 Pin 15
7CM1090 Bolt 19 7CM1090 Bolt 19
18EM1030 Washer 16 18EM1030 Washer 16
7221255 Spring 6 7221255 Spring 6
6702903P LH Lever 4 6702904P RH Lever 4
7252989 Pivot 7 7252989 Pivot 7
7387392 Pivot 13 7387392 Pivot 13
6737191 Wedge 5 6737191 Wedge 5
6578253 Spring 2 6578253 Spring 2
47DM10 Nut 17 47DM10 Nut 17
7255136 Screw Socket Head 8 7255136 Screw Socket Head 8
7313162 Bushing Spacer 10 7313162 Bushing Spacer 10
Bobcat weld-on edges makes installation of the Bobcat bolt-on cutting edges easy. Weld-on cutting edges
come with prepunched bolt holes for installation of Bobcat reversible bolt-on edges.
Easily replace the high wear front bucket cutting edges by installing a prepunched weld-on edge which
accommodates Bobcat bolt-on cutting edges. Bolt-on edges are reversible for prolonged life, and attached with
nuts and bolts.
Bobcat® buckets are shipped from the factory with Size Bucket Type Edge Part #
pre drilled holes in the original front cutting edge.
54" Dirt, C&l 6661451
Pre drilled holes reduce the amount of time and labor 60" C&l, LowPro; Utility 6661452
required to install a bolt-on reversible, double bevel 66" C&l; LowPro; Utility; 6661453
cutting edge. This is restricted to buckets without the Light Material
standard type teeth.
72" C&l; LowPro; Utility 6713713
The buckets listed to the right are shipped with pre 78" LowPro 6661455
drilled holes in the original cutting edge.
They are made of durable rubber compounds to ensure a long wear life. Bobcat rubber edges are available
in eight lengths. All edges are 1" thick and 6" wide. The edges have a 11/16" wide slot, and are 3-1/2" long for
wear adjustment.
Here are some reasons why your customers will want to consider using rubber edges versus normal steel
cutting edges:
• Rubber edges will not gouge into surfaces. They follow surface irregularities.
• Rubber edges will reduce damage to concrete floors. They offer a squeegee effect on wet floors.
• Rubber edges reduce noise (compared to steel) from the bucket edge scraping on hard surfaces.
• Steel edges can actually create sparks. Rubber reduces the risk of fire or explosion in certain conditions.
• Rubber edges create a softening effect on the machine, and can actually reduce driver fatigue and vibration.
Edge Part
Length Width Height
Number
6988872 62" 8" 2.5"
6988873 74" 6" 2.5"
6988874 60" 6" 2.5"
6988871* 100" 8" 2.5"
30° Bevel
*6988871 – 100" ships in two pieces.
1/4" x 4" Encased 2 1/2" Height
Steel Plate
1.50"
Bucket Edge
Width Length Width Height
Part No. Part No.
48" 7395875 6988872 62" 8" 2.5"
56" 7272770 6988872 62" 8" 2.5"
60" 7395876 6988872 62" 8" 2.5"
62" 7272769 6988872 62" 8" 2.5"
66" 7395878 6988873 74" 6" 2.5"
68" 7272771 6988873 74" 6" 2.5"
72" 7395879 6988873 74" 6" 2.5"
74" 7272768 6988873 74" 6" 2.5"
Place bolts holes
according to the
existing bucket holes.
Hardware
0.688"
(4)
(5)
(1) (3)
(2)
Bobcat offers a full line of bucket teeth and components for your attachment bucket needs. All teeth are
compatible on Bobcat buckets and with other Bobcat teeth components. Bolt-on and weld-on tooth assemblies
for loader and excavator buckets are available. The tooth is designed so it does not protrude below the cutting
edge of the bucket. This allows for a smooth grading job even with a tooth bucket. All newer Bobcat loader
buckets are pre-drilled to accommodate the bolt-on tooth assemblies, bolt-on cutting edge and Bucket Bite
tooth bar.
Carbide-tipped bits are mounted on a planer’s revolving drum to cut and pulverize pavement material, on wheel
saws to cut through asphalt, concrete, frozen ground and wire mesh, and on trenchers to dig through tough,
rocky soil to make a trench.
Bobcat Wheel
Image Planer Trencher Application
PN Saw
CONCRETE
For cutting concrete and rock. Bit does not have
protective flange since concrete debris does not
6650138SD X X bind to the bit as easily as asphalt. The carbide tip
is set deeper into the body of this bit to hold it more
securely. Offers good wear characteristics due to its
blunt point.
ALL PURPOSE
Blunt point but heavier carbide bit for longer life. For
6650137SD X X
all types of asphalt and abrasive material. Wide tip
for high fracture resistance.
HIGH IMPACT
For high impact and abrasive applications. Deep
7010631SD X recessed carbide for longer life. Washer to provide
block protection and full sleeve retainer to protect
the entire block bore.
ALL PURPOSE
Standard from the factory on 14 to 24- in planers.
For lower HP cold planers and wheels saws. For
6672259SD X X use in all types of asphalt. Full sleeve retainer for
entire block bore protection. Bits have a flange at
the base to protect the bit holder. Sharper point for
greater performance.
SURFACE PLANER
Standard planer bit from the factory for surface
planers. Smaller in size than normal planer bits. For
6906904SD X
drilling in medium to hard conditions. Will not survive
impact with steel. Flanged carbide tip for increased
wear resistance in abrasive cutting.
D.
Standard Tool
Longer Life & Better Protection
Double-tipped carbide teeth efficiently rip through
hard and soft woods, providing long life and uptime
protection for the attachment. Best for sandy or
rocky conditions. Part No. 7023593
Knife Tool
Cut Faster & Smoother
New design that is perfect when there is no need to
work the material into the soil.
PRODUCTIVITY FEATURES
• Cuts up to 50% faster than carbide tools • Designed to self-shape as it wears
• Force concentrated at point for more efficient • Excellent option when not working material
chipping into soil
• Shorter lifespan than standard tool • Interchangeable with carbide tools in the current
• Shape of edge concentrates force as it chips production rotor
• Unique body shape that helps material flow past • Knife edge shape more forgiving than competitor’s
as it cuts knife teeth
• Increases effective tree cutting diameter • Lower cost than traditional carbide tools
• Produces finer sized material in fewer passes
• Reduces ground compaction from repeated travel
over the same area
Bobcat auger bits are available in four styles to meet the demands of your customers who are working in a
variety of soil conditions.
1a. L
ight Duty Auger Parts – (White) 45" Length, 2.5" round drive hub with single flighting, a patented
3-flute pilot point and bolt-on replacement teeth.
1b.Light Duty Auger Parts – (White) 42" Length, 2.5" round drive hub with double flighting, a patented 3-flute
pilot point and bolt-on replacement teeth.
Part # Description
7122435 6" Auger Assembly (single flight)
7122436 9" Auger Assembly (double flight)
7122437 12" Auger Assembly (double flight)
7122438 15" Auger Assembly (double flight)
7122439 18" Auger Assembly (double flight)
7122440 24" Auger Assembly (double flight)
2. Standard Duty Auger Parts – (Charcoal) 48" Length, 2.5" round drive hub with double flighting, a patented
3-flute pilot point and bolt-on replaceable teeth.
3. H
eavy Duty Auger Parts – (Orange) 42" Length, 2" hex drive hub with single flighting, cast boring head,
3-flute pilot point and “tap-in” replaceable teeth.
4. R
ock Auger Parts – (White) 48" Length, 2" hex drive hub with cast boring head carbide tips for drilling
through fracturable rock.
5. P
lanetary Auger Parts
(Orange) 61.5" Length, 2.5" hex drive hub with flat carbide tips for drilling in moderate ground conditions, tap-
in replaceable teeth.
(White) 61.5" Length, 2.5" hex drive hub with carbide tips for drilling in frozen ground, fracturable rock and
soft rock, tap-in replaceable teeth.
HD Bits
Part # Description
7243233 8" HD Auger Bit
7243234 12" HD Auger Bit
7243235 18" HD Auger Bit
7243236 24" HD Auger Bit
7243237 30" HD Auger Bit
7243238 36" HD Auger Bit
7243239 48" HD Auger Bit
Rock Bits
Part # Description
7243240 8" Rock Auger Bit
7243241 12" Rock Auger Bit
7243242 18" Rock Auger Bit
7243243 24" Rock Auger Bit
7243244 30" Rock Auger Bit
Wear Parts
Part # Description
7243248 Tooth Medium MFT
7243249 Tooth Medium CHSL MFT
7243250 Guide Pilot HD
7243251 Tooth Rock TTD
7243252 Tooth Rock TTS
7243253 Guide Pilot Rock
7243729 48" Auger Extension
Innovative
Wear Caps
Bolt On
Rock Head 7001516
The Carbide Tooth
has an enlarged
P21-RR shoulder to increase
Carbide Tooth holder protection.
*Please note the Bolt-on Rock Head is compatible with the Bobcat Standard Duty Auger only. May not fit on
augers that are two years old or older due to wear on parts.
6" BORH Kit Bobcat Part No. 7163409 9" BORH Kit Bobcat Part No. 7163410
7001517 HEAD AUG [6-AR/RR] BOLT-ON CAST 1 7001518 HEAD AUG [9-AR/RR] BOLT-ON CAST 1
7001523 CAP WEAR [6ARR] CAST 2 7001524 CAP WEAR [9ARR] CAST 2
17C828 BOLT HEX G5 1/2-13 UNC X 1 3/4 2 17C828 BOLT HEX G5 1/2-13 UNC X 1 3/4 4
17C856 BOLT HEX G5 1/2-13 UNC X 3 1/2 1 17C856 BOLT HEX G5 1/2-13 UNC X 3 1/2 1
85D8 NUT HEX LOCK STOVER G8 1/2-13 UNC 3 85D8 NUT HEX LOCK STOVER G8 1/2-13 UNC 5
12" BORH Kit Bobcat Part No. 7163411 15" BORH Kit Bobcat Part No. 7163412
7163411 HEAD AUG [12-AR/RR] BOLT-ON CAST 1 7001520 HEAD AUG [15-AR/RR] BOLT-ON CAST 1
7001525 CAP WEAR [12ARR-1] CAST 1 7001527 CAP WEAR [15ARR-1] CAST 1
7001526 CAP WEAR [12ARR-2] CAST 1 7001528 CAP WEAR [15ARR-2] CAST 1
17C828 BOLT HEX G5 1/2-13 UNC X 1 3/4 4 17C828 BOLT HEX G5 1/2-13 UNC X 1 3/4 4
17C864 BOLT HEX G5 1/2-13 UNC X 3 1/2 1 17C864 BOLT HEX G5 1/2-13 UNC X 3 1/2 1
85D8 NUT HEX LOCK STOVER G8 1/2-13 UNC 5 85D8 NUT HEX LOCK STOVER G8 1/2-13 UNC 5
18" BORH Kit Bobcat Part No. 7163413 24" BORH Kit Bobcat Part No. 7163414
7163413 HEAD AUG [18-AR/RR] BOLT-ON CAST 1 7001522 HEAD AUG [24-AR/RR] BOLT-ON CAST 1
7001529 CAP WEAR [18ARR-1] CAST 1 7001531 CAP WEAR [24ARR-1] CAST 1
7001530 CAP WEAR [18ARR-2] CAST 1 7001532 CAP WEAR [24ARR-2] CAST 1
17C828 BOLT HEX G5 1/2-13 UNC X 1 3/4 4 17C828 BOLT HEX G5 1/2-13 UNC X 1 3/4 4
17C864 BOLT HEX G5 1/2-13 UNC X 3 1/2 1 17C864 BOLT HEX G5 1/2-13 UNC X 3 1/2 1
85D8 NUT HEX LOCK STOVER G8 1/2-13 UNC 5 85D8 NUT HEX LOCK STOVER G8 1/2-13 UNC 5
The Rock Head is compatible with Aggressor augers 9" Dia. Auger without Teeth or Pilot Shown
made with a 1 piece cast auger head. The auger
head acts as the tooth and pilot mounting platform.
Below are things to look for when determining if your
auger is compatible with the Rock Head system.
Bobcat Aftermarket Parts offers forged breaker bits with a life time warranty against defects and workmanship.
The hot-forging process compacts the material and offers a more dense aligned steel grain structure.
Forged tools are tough and durable offering faster penetration, focused energy, and longer tool life.
The demands of demolition tools in the tough construction field ask for extreme capabilities. These breaker bits
are the engineering approved tools for all Bobcat breakers. The right tool for each job!
B. Nail Point
D. In-Line Chisel
E. Blunt Tool
F. Tamping Pad
B E H
6904662 – Breaker Bit Stand with Additional Top Plate For Smaller Bits – White
Bobcat offers a line of Zinc Plated Hitch Pins, Tractor Linkage Pins and Drawbars for Bobcat Category 0-1-2
implement needs, ideal for 3-point hitch implements, hardened for quality and designed to meet 0-1-2
application demands.
• Durable pre-assembled metal display rack kits available with a header card to identify type, size and part
number for the displayed pins.
• Additional drawbars, lynch, hair, hitch and linkage pins are sold separately.
ZINC PLATED HITCH PIN STARTER DISPLAY LINKAGE PIN STARTER DISPLAY
PART NUMBERS INCLUDED IN STARTER DISPLAY (6988384) PART NUMBERS INCLUDED IN STARTER DISPLAY (6988383)
PART NO. DESCRIPTION QTY PART NO. DESCRIPTION QTY
6988362 Pin, Zinc Plated Hitch 3/4 x 4-1/4 4 4 6988356 Pin, Lift Arm Cat 1-2 Forged 1-1/8 x 1-3/4 3
6988363 Pin, Zinc Plated Hitch 3/4 x 6-1/4 4 6988357 Pin, Lift Arm Cat 2 Adj 1-1/8 x 1-3/4 4
6988364 Pin, Zinc Plated Hitch 7/8 x 4-1/4 4 3 6988358 Pin, Top Link Cat 1 3/4 x 3-7/8 4 4
6988365 Pin, Zinc Plated Hitch 7/8 x 6-1/4 4 3 6988360 Pin, Top Link Cat 2 1 x 4-5/16 3
6988366 Pin, Zinc Plated Hitch 1 x 4-1/4 2 6988373 Pin, Top Link Cat 1 3/4 x 2-3/4 4 4
6988367 Pin, Zinc Plated Hitch 1 x 6-1/4 4 2 6988374 Pin, Top Link Cat 2 1 x 3-9/16 4 3
6988381 Pin, Zinc Plated Hitch 5/8 x 4-1/4 4 3 6988375 Pin, Lift Arm Cat 1 Adj 7/8 x 1-5/8+ 4
6988382 Pin, Zinc Plated Hitch 5/8 x 6-1/4 4 3 6988376 Pin, Lift Arm Cat 1 Forged 7/8 x 1-3/4 4 4
6988498 Display, Hitch Pin Rack 1 6988377 Pin, Lift Arm Cat 1 Adj 7/8 x 2+ 4 3
6988378 Pin, Lift Arm Cat 1 Forged 7/8 x 2-1/4 4 3
6988379 Pin, Lift Arm Cat 1-2 1-1/8 x 1-3/4 4 3
6988380 Pin, Lift Arm Cat 2 Forged 1-1/8 x 2 4 3
6988499 Display, Linkage Pin Rack 1
Door Assembly
Order a door assembly for a lower price than the kit and shorten the installation time by 95%.
• Cost-effective.
• Easy installation.
• Fully assembled.
• Latch in place.
Enhance the security of R-Series or M-Series compact loaders with a door handle
latch assembly.
Glass Packs
Specifications
• Flash Rate: 60 + 10 FPM
• Current Draw: Max: @ 12V = 0.65 Amps/@ 80V = 0.15 Amps
• Flash Energy: 2.5 Joules @ 12V
Full sized, rotating beacon feature twin sealed 35,000 candle power lamps.
Belt drive for quiet reliability and simplified maintenance. Excellent for indoor
or outdoor signaling, safety systems or warning applications.
• Two PAR36 35,000 candle power bulbs 75 to 90 flashes per minute
• Heavy duty anodized aluminum base
• 4.7 amps at 12 VDC
• 9 1/2" high, 8 1/2" diameter
• Mounting – Permanent or Magnetic
• Dome Color – Amber
BEACONS
6675523 – Beacon
STROBE LIGHTS
7241140_Strobe Light
SUPERIOR VISIBILITY
This lamp puts out an astounding 1,000 Effective Lumens of bright, white light—that’s 30% more usable
light compared to the stock halogen versions! Additionally, the LED light is easier on the eyes and the color
temperature helps to keep the operator more alert. Ultimately, this improved visibility enables operators to be
both more safe & productive.
EXTREME DURABILITY
Bobcat recognizes that equipment (and lights) need to function in extreme conditions and in harsh worksites.
Shock & vibration often cause bulb-based lights to prematurely fail, but LED lights actually excel in these
conditions. The impact-resistant polycarbonate lens and housing combine with solid state electronics to provide
maximum durability that you can count on.
UNMATCHED LONGEVITY
The halogen lamp that this LED version replaces has an average rated life of 200 hours. This new LED light
has been designed to last tens of thousands of hours! You’ll love the fact that you can install this LED light and
enjoy years of maintenance-free operation!
Features:
• Plug-and-play design
• Expected life 50,000 hours
• 3 times brighter than equivalent bulb lamp
• Drop in replacement
• Compatible with all models including R-Series
Lights are adjustable: Can rotate left and right and tilt up and down.
Bolts t factory holes on most Bobcat Skid Steer models. No drilling required to install.
CAMERA
• 118-degree horizontal lens angle for wide viewing
capabilities
• 89-degree vertical viewing angle for enhanced upward
and downward viewing
• Instructions included to set at correct viewing angle for
your machine
• Low level light capabilities for usage in darker
environments
• Heavy-duty, robust, stainless steel mounting hardware
and a heat and impact resistant CYCOLOYTM housing
that is waterproof and dust proof
Bobcat MaxControl
How it works
1. Any of your customers’ Bobcat loaders equipped with
selectable joystick controls can be fitted by your dealership
with a durable, job-tested and affordable Bobcat MaxControl
component box and a single wiring harness.
Customer Benefits
2. Once your service team completes the simple install on a
Your customer can do a quick two-person job with one person customer’s loader, they will invite “the owner” to download
using Bobcat MaxControl remote operation. It’s like having an the Bobcat MaxControl app from the Apple App Store® to
extra set of hands. Or the customer can perform quick tasks their iPad or iPhone. The “owner” will then authorize and
without needing to enter the cab. invite users (operators) to download the app. The “owner”
will also determine which operators have access to which
Once you install the necessary hardware on your customers’ machines.
loaders, all they need to enable remote operation with an iPad
or iPhone – and the Bobcat MaxControl app. 3. After completing setup of the app, your customer can control
their Bobcat loaders from outside of the cab with the Bobcat
If your customer has multiple loaders on the same site equipped MaxControl app. If your customer has multiple loaders on
with the Bobcat MaxControl hardware, they can choose which the same site with Bobcat MaxControl, they can select which
loader to control remotely from the app. Operators can only machine to control in the app. Unlike other remote operation
control one loader at a time, but it is simple to switch between systems, there are no additional controls needed. Your
machines. customer just needs the app on an iOS device.
Bobcat loader with selectable Dealer-installed Bobcat iOS device Bobcat MaxControl app
joystick controls MaxControl component box
and wiring harness
Apple, the Apple logo, iPhone, and iPad are trademarks of Apple Inc., registered in the U.S. and other countries and regions. App Store is a service mark of Apple Inc.
MX depth check will help operators dig quicker, with less effort
and greater precision. The system has a bench beside trench,
to achieve minimum cover, it can “bench” on known grade to
sustain a grade or it can “bench” on laser signal to create slope,
or to sustain a grade on multiple locations on a job site.
Filter Heater
Specifications
Measures 4" X 7" with 2 boot hooks on each 4" edge. The filter
heater wraps around the filter housing and warms it with 85
watts of electrical energy (120v draws .7 amps). Fits from 2.5"
to 4" diameter (8" to 12" circumference) metal and high temp
plastic filter cans (melt point of plastic determines use on plastic).
Contents: 2 springs, 2 nylon ties for attaching.
Installation
The fiberglass side faces the filter housing with the foam rubber
insulation layer facing out away from the filter housing. Connect
the springs to the hooks on one side of the Filter Heater and use
the nylon ties to connect to the opposite side. Draw up on the
nylon ties to complete a snug fit (untilrm). Connect the ground
lead (green) to a suitable ground.
Thermostat
The thermostat used on the 120v is bi-metallic and is set to 65°F
on and 85°F off. Although the temperature control is not precise,
the range of the control is usually a twenty degree spread
between on and off. The thermostat may not respond exactly
at the temperature specified, but at a few degrees above or below. The control of the thermostat may cycle higher or lower than the
temps above until the thermostat stabilizes in the cycling. Typically, the electrical current flows freely below the “on” temperature and
continues to flow until the “off” high temperature is reached. When the contact is broken at the high (off) temperature the current is off
until the temperature falls below the “on” temperature. The cycle continues in this way maintaining the temperature between the on
and off positions.
NOTE: It is appropriate to monitor the temperature performance of thermostats from time to time to determine that the performance
is what is expected. A suitable way to test the performance of the 120v thermostat is to use an infra-red thermometer (non-contact).
Because the thermostat turns off at 85° F, touching it with your hand (at 98° F body temp) may not indicate that it is heating.
Battery Heaters
Protect your cab investment during travel with these padded vinyl covers designed to fit the front or rear
window of your loader cab.
Installation is easy with the nylon webbing and buckles that strap on and are adjustable to fit around the door or
window. No holes to drill.
The heavy-duty durable vinyl is 18 oz. and padded with 1" foam to help prevent broken glass during
transportation on rough surfaces.
Protect your cab investment during travel with these padded vinyl covers designed to fit the front window of
your compact excavator.
Installation is easy with nylon webbing and buckles that strap on and are adjustable to fit around the door or
window. No holes to drill.
The heavy-duty durable vinyl is 18 oz. and padded with 1” foam to help prevent broken glass during
transportation.
7441456
M- & R-Series
Compatible
This easily portable, plug and play industrial radio remote control solution can be mounted and unmounted
on any machine within minutes. The Remote Control distances the operator from dust, noise, vibrations or
dangerous job sites that require special safety precautions. Work can be done faster with higher precision,
and in some applications, reduce the amount of work force needed on the job site.
Shipyards
Distancing the operator from the carrier in shipyards with limited space, potential chemicals and other
airborne pollutants has great health benefits. The job can be done easier, while having a better visual
to manage tight spaces in containers.
Other Applications
With the remote-control solution, you can work on all the hazard applications but also if you need more
visibility and touch the job in comfort zone.
Fits Bobcat Compact Loader Models 663, 751, 753, 763, 763, 773, 853, 863, & 7753.
36” bumper bolts onto rear door. 22” bumper bolts directly onto 36” bumper to provide additional protection.
6902856 (Tail gate only) 553, 751, 753, 763, 773, 863, 864, 873, 883,
963, A220, A300, A100, S130, S150, S160,
S175, S185, S205, S220, S250, S300, S330,
T110, T140, T180, T190, T200, T250, T300,
T320
Bobcat Parts offers a complete line of cab enclosures. All enclosures are created from quality
materials for long life. Here are some of the outstanding features of Bobcat cab enclosures:
Loader Models
Part# Description Fits Models
Inside Vinyl Cab
Fits all 40 series and all F series compact loaders. (Fits on inside of ROPS cage) 371, 530, 533, 540, 542, 543,
6565270 Enclosure
553, 630, 632, 641, 642, 643, 645, 653, 741, 742, 743, 751, 753, 763, 773, 843, 853, 863, 864, 873, 7753
(Mounts inside cab.)
6653437 Vinyl Cab Enclosure 440, 443, 450, 453, 463, S70
6659303 Vinyl Cab Enclosure 40 Series Machines: 540, 542, 543, 641, 642, 643, 741, 742, 743, 843, 853, 863, 864, 873
Fits all F series skid steers built 1991 to 1999 Models include: 530, 533, 553, 630, 632, 653, 751, 753, 763, 773,
6660340 Vinyl Cab Enclosure
853, 863, 864, 873, 7753
Fits all G Series skid steers: 751, 753, 763, 773, 863, 864, 873, 883, 963, A220, A300, S100, S130, S150, S160,
6675544 Vinyl Cab Enclosure
S175, S185, S205, S220, S250, S300, S330, T110, T140, T180, T190, T200, T250, T300, T320
6675706 Vinyl Cab Enclosure 873, 963
M-Series: S450, T450, S510, S530, S550, T550, S570, S590, T590, S630, S650, S750, S770, S850, T630, T650,
6989239 Vinyl Cab Enclosure
T750, T770, T870, A770
6599721 Replacement Vinyl Door Replacement door for all F and 40 series machines
6666913 Replacement Vinyl Door Replacement Door for 440, 450, 453 (kit number 6653437)
6675590 Replacement Vinyl Door Vinyl Door Replacement for kit number 6675544
6722597 Velcro Kit Replacement velcro for all cab kit number 6565270
Excavator Models
Part# Year MFG. Description Fits Models
6669009 95-99 Vinyl Cab Enclosure 320, 325, 331, 337
6677213 2000-05 Vinyl Cab Enclosure Kit 325D, 328D, 331D, 337D, 341D, 331ED
6983132 2006-2010 Vinyl Cab Enclosure 324, 325, 328, 329, 331, 334, 335, 337
6989240 Since 2010 Vinyl Cab Enclosure M-Series: E26, E32, E32I, E35, E35I, E42, E45, E50, E55
The optional Deluxe Instrument panel for the Bobcat® G-Series cab is available through Bobcat Aftermarket
Parts. The Deluxe Instrument panel replaces the Standard Instrument Panel on the right side and adds more
convenience along with the following state-of-the-art features.
Keyless Start
It offers two levels of protection against unauthorized use. The first (user) level requires a password be entered
prior to starting the engine. As an option, a second (owner) password can be set to start the loader and prevent
unauthorized use of certain loader functions. This password can be changed as of ten as necessary.
Deluxe Instrumentation also provides helpful information (in seven languages) on how to use various
attachments. For added peace of mind, the automatic shutdown feature (a factory option with Standard
Instrumentation) stops the engine in the event of certain conditions, such as high engine temperature or low
hydraulic pressure, that could damage the engine or hydraulic system.
The Deluxe Instrument panel is just one of the many ways your customers can increase the efficiency of their
business with Bobcat products.
Adjust the speed of the wiper to match the operating conditions. In a light rain you don’t have to choose
between constantly turning the wiper on and off or letting it run when there isn’t much moisture on the glass.
Great for all weather types. Enjoy the benefits of an intermittent wiper on your loader cab door.
SWITCH FUNCTIONS:
a) Push to wash function:
• Depress button to engage washer pump
• Results in 2-3 wipes after release of push switch
b) Off/Park
• When switch is off wiper should return to park
position
c) Long Delay
AVAILABLE FOR M-SERIES LOADERS
• 4 +/- 1 CPM
PART NUMBER: 7240148
d) Short Delay
• 18 +/- 2 CPM
e) Low Speed
• Continuous low
f) High Speed
• Continuous high
Weighlog Kit
• 7257869
Universal Bobcat LED Light Bar Fits ALL Bobcat Utility Vehicles:
• 4 LEDS (2 spot/2 floods)
• Light bar with bent upper light bar and stamped Bobcat logo center plate
• Harness kit and switch
• Roll Cage Mounting Brackets to fit 3400 & 3600 Series Bars
• Roof Mounting Brackets to fit 3400 & 3600 Series Hard Tops
• Will fit 3200, 3400, 3400XL, 3600, 3650
Front Upper Roll Cage Front Lower Roll Cage Front Overhead Cross Bar Rear Overhead Cross Bar Rear Upper Roll Cage Front Cab Roof
ADJUSTMENT LINKAGE
Each fixture can be individually aimed up, down, left or right.
ADJUSTMENT LINKAGE
Point the 2 center spots straight and angle the 2 outside
Dual pivot linkage allows bar to be adjusted
floods to point out slightly for optimum illumination.
up, down, forward or backward in an arc
motion while keeping the lights aimed Flood Spot Spot Flood
where desired.
30° 90°
A plow system is now available for the Bobcat 2200 4x4 utility vehicle. This rugged plow is capable of pushing
debris, mulch, farm waste, and snow. It will fit multiple chassis.
Bobcat® Parts has a variety of accessories available for the Toolcat 5600. These accessories include beacon,
strobe light, backup alarm, work lights, keyless start, horn kit, rear window guard, RAC bracket kit and radiator
screen kit.
The following kits are sold separately and are required for canopy installation.
6988056 - Bobcat CT225, CT230, CT235, CT335, CT440 3" x 2" Mounting Kit
Notice: The Bobcat Canopy (pn: 6988055) does not provide ‘falling object’ protection.
The standoff spring allows for attachment hose routing out of the way of machine
and attachment functions.
• Easy installation.
• Minimized hose damage.
Kit includes:
• One standoff spring.
• Two covers.
• One clamp base.
Offer your customers the ability to connect new attachments to their old equipment and old style
attachments to their new equipment.
PART NO. DESCRIPTION QTY Customers should be cautioned that some loader and
7246803 Coupler Poppet Female 1 attachment combinations have minimal plumbing
7246804 Coupler Poppet Male 1 clearance when the attachment is lifted or tilted back.
Clearances should be checked to eliminate potential
interference problems.
Customers who wish to replace the old poppet style couplers with
the flush face design should always check for adequate clearance
PART NO. DESCRIPTION QTY
between the loader couplers and attachment when the attachment
7246797 Coupler, FF Female 1
is fully tilted back. Please note 6680018 has an external thread.
6680018 Coupler, FF Female 1
Male Connect Under Pressure Flat Faced Coupler – 1/2" Body, 1-1/16" –
7246777
12 SAE UN/ORB Thread
7246788 Female Flat Faced Coupler – 3/8" Body, 3/4" – 16 SAE UNF/ORB Thread
7246789 Male Flat Faced Coupler – 3/8" Body, 3/4" – 16 SAE UNF/ORB Thread
7246790 Female Flat Faced Coupler – 1/2" Body, 1-1/16" – 12 SAE UNF/ORB Thread
7246791 Male Flat Faced Coupler – 1/2" Body, 1-1/16" – 12 SAE UNF/ORB Thread
7246782 Female 90 Degree Flat Faced Coupler – 1/2" Body, 9/16" – 18 JIC UN Thread
7246796 Male 90 Degree Flat Faced Coupler – 1/2" Body, 9/16" – 18 JIC UN Thread
7411975 Female Flat Faced Coupler – 1/2" Body, 1/2" NPT Thread
7411976 Male Flat Faced Coupler – 1/2" Body, 1/2" NPT Thread
CAUTION: It is important that users of the flat faced couplers read the following Safety Guidelines.
Improper use of these products can lead to severe injury and damage to equipment.
Do’s Don’ts
1. Always wipe the two mating faces clean 1. Never attempt to reconnect using a
before connecting. damaged half coupling, as this will destroy
the seals in the mating half and necessitate
2. It is recommended that dust caps and replacement of both halves.
plugs be used when the couplings
are disconnected. 2. Do not leave the coupling where it may be
run over by a vehicle or otherwise crushed.
3. Always align the external locking ball (if This will distort the sleeve and prevent
used) with the notch in the locking sleeve connection and disconnection.
and then pull the locking sleeve back fully
to disconnect. 3. Never try to turn the sleeve when the
coupling is disconnected since this will
4. If a coupling sticks, first check that pressure cause the locking ball to jam under the
has been released. Ensure the locking ball locking sleeve and damage the coupling.
and notch in the locking sleeve are aligned,
pull back the sleeve and twist the couplings 4. Never try to strip the coupling down. There
apart. Sticking is normally caused by dirt in are no user serviceable parts. If the coupling
the coupling or physical damage due is damaged it should be replaced with a
to abuse. new coupling.
5. Connect and disconnect new couplings 5. Never hit the center poppet of the coupling to
two or three times to work the PTFE seals. try and release locked-in pressure. This can
Sometimes a new coupling will stick if the cause irreparable damage to the coupling
seal has not been worked. and serious injury.
6. When fitting couplings, only apply the 6. When fitting couplings, never clamp on the
spanner or grips to the hexagon and sleeve of the female or nose of the male –
nowhere else. this will cause distortion and damage.
7. Avoid damage to the coupling faces. 7. Never subject the couplings to external
Burrs and scratches cause damage to forces, especially side load. This can reduce
the seals and cause leaks. They can also the life of the coupling or cause failure.
impede connection and disconnection of
the couplings. 8. Never allow the torsional forces transmitted
from hoses to unscrew/screw together
8. Periodically lubricate the internal locking couplings. Use rotary couplings.
balls on the female half of the coupling
with silicone grease. 9. Never use a coupling as a plug.
9. All hydraulic systems should be protected 10. Do not connect and disconnect with
with a good quality filter; minimum 25µ pressure in the line, unless the coupling
filtration is recommended. The filter type is specifically designed to do so.
should be changed at regular intervals,
in accordance with the manufacturer’s
instructions. Adequate filtration ensures the
oil remains free of contaminants that can
damage the internal seals of the coupling.
Bobcat ground protection mats are the perfect way • Two choices – 2-sided maximum traction diamond/
for your customers to eliminate damage to lawns diamond or diamond/smooth plate tread designs
and landscaped areas. These rugged mats can • Tough 1/2" thick polyethylene with heavy
be used in a broad variety of applications such as: cleat design
construction, golf courses, utilities, landscaping,
• Reuse hundreds of times – lasts through years
tree care, cemeteries, drilling and wherever the
of hard use
cost of ground restoration is a factor. Works as a
great driving surface in muddy conditions – no more • Moisture & rot proof – withstands extreme
stuck equipment. weather conditions
• Easy to move and set-up
• Use with or without Turn-A-Links
• Flexible – withstands up to 60 ton loads
6983224 24" sq. Square Black Outrigger Pad Add links to mats when
conditions call for a locked
set-up. Single hooks link
together 2 mats. Double
hooks link together four mats
at a common center.
6983208 3' x 8' Black Bobcat Diamond Mat Pack 6983211 3 ft. Handi-Hooks
6983210 3' x 8' Clear Bobcat Diamond Mat Pack 6983216 Steel Storage & Transportation Rack
6988692 4' x 8' Black Smooth/Diamond Pack 6983217 Corner Wedge for 4' x 8' Black Mat
6983207 4' x 8' Black Diamond Mat Pack 6983218 Corner Wedge for 3' x 8' Black Mat
6983209 4' x 8' Clear Diamond Mat Pack 6983220 Corner Wedge for 3' x 8' Clear Mat
40 lbs Hydraulic Hand Breaker: 6902106 Hydraulic Hand Breaker Bits, 1 inch Hex
• Flow: 4-7 GPM (15-23 LPM)
Part Number Description
• Optimum Flow: 4 GPM (15 LPM)
• Pressure: 1200 – 2000 PSI (85-140 BAR) RH26003218 Asphalt Cutter
• Maximum Back Pressure: 150 PSI (11 BAR) RH10002184 3 inch Chisel, 18" long
• Weight: 40 lbs (16 kg) RH10002185 ⅝" Ground Rod Driver
• Length: 25 inches (63 cm) RH26003230 ¾" Ground Rod Driver
• Tool Steel Capacity: 1 inch x 4¼ inches
RH26003229 Moil Point,18" long
• Must order whip hose kit: 6902278
66 lbs Hydraulic Hand Breaker: 6988454 Hydraulic Hand Breaker Bits, 1¼ inch Hex
• Flow: 4-7 GPM (15-23 LPM)
Part Number Description
• Optimum Flow: 4 GPM (15 LPM)
• Pressure: 1200-2000 PSI (85-140 BAR) RH10002224 3" Chisel, 18" long
• Maximum Back Pressure: 150 PSI (11 BAR) RH10002188 ⅝" Ground Rod Driver
• Weight: 66 lbs (30 kg) RH10002187 ¾" Ground Rod Driver
• Length: 27 inches (69 cm) RH10002189 ⅞" Ground Rod Driver
• Tool Steel Capacity: 1¼ inch x 6 inches
RH10002171 Moil Point,18" long
• Must order whip hose kit: 6902278
Model DX–700E
Part Number 7031060
WEIGHT & DIMENSIONS
Operating Weight – lb (kg) 1630 (740)
Static Weight – lb (kg) 1543 (700)
Length – in (mm) 90.0 (2280)
Width – in (mm) 27.6 (702)
Height – in (mm) 46.0 (1170)
DRUM
Diameter – in (mm) 16.0 (406)
Width – in (mm) 25.5 (650)
Shell Thickness – in (mm) 0.38 (9.5)
Wheelbase – in (mm) 22.4 (570)
WEIGHT & DIMENSIONS
Centrifugal Force – lb (kN) 4492 (20.0)
Vibrations Frequency – vpm (Hz) 3300 (55)
Forward Travel Speed (fwd) – mph (km/h) 0 – 2.2 (0 – 3.5)
Backward Travel Speed (bwd) – mph (km/h) 0 – 1.2 (0 – 1.9)
Gradeability 36%
Recommended Compaction Depth – in (mm) 14 (356)
ENGINE
Make Kubota, diesel
Model EA 330
Max. Horsepower – hp (kW) 6.0 (4.5)
Engine Speed – rpm 3000
Starting System Recoil Electric
Fuel Tank Capacity – qt 5.1 (4.8)
MISCELLANEOUS
Curb Clearance – in (mm) 9.7 (248)
Side Clearance – in (mm) 1.02 (26)
Water Tank Capacity – gal (L) 11.1 (42)
All three Single Direction Vibratory Plate Compactors (BC15 – part number 6903085, BC19 – part number
6903086, and BC22 – part number 6903087) are powered by the rugged and reliable Honda® 4-cycle engines
with recoil start. Following are the features and benefits of these plate compactors.
Features Benefits
Standard water tank Easier compaction of hot mix asphalt
Conducts heat much quicker than cast iron with superior results
Steel plates
on asphalt paving applications
Fully adjustable padded grip handles Reduces vibration for maximum operator comfort
Shock mounts Isolate the engine and prevent handle vibration
Unique ratcheting throttle design Improves control around jobsite obstacles
Carrying carts available Provides ease in transporting the units
Bobcat plate compactors are ideal for creating a level grade for patios, paths, driveways, and parking lots. Each
contains a reliable Honda® engine, a removable water sprinkler system for compacting hot mix asphalt, and
shock mounts which prevent handle vibration. Listed below are the specifications of each plate compactor.
The impact force of upright rammers is the perfect solution for compacting cohesive and granular types of soil.
Unlike plate compactors, which are only recommended for granular type soil, the rammers create an impact
force which allows air and excess water to escape so the soil compacts.
The BR72 (part number 6901862) and BR55 (part number 6902919) Upright Rammers are the best choice for
backfilling and narrow trench compaction with their low center of gravity, lightweight design and low profile.
Following are some features and benefits of these upright rammers..
Features Benefits
Powered by 4-cycle Honda engines with recoil start
®
Eliminates the need to mix oil and gas
Reduces the need for daily greasing and ensures continuous
Oil-splash lubrication
protection of internal parts
Vibration reducing padded grips Provide operator comfort and safe, efficient use
Low profile, lightweight design and low center of gravity Best choice for backfilling and narrow trench compaction
Narrow foot options are available for these unit s and are ideal for compaction of the backfill in narrow
trenches. The narrow feet are interchangeable with the standard feet with the exception of the 4 inch foot for
the BR55, which mount s to the rammer leg allowing the foot into smaller trenches. See specifications below
for part numbers.
Bobcat Upright Rammers are an ideal addition to your customer’s jobsite. Whether through your sales, rental or
parts departments, these machines will provide your dealership with dependable industry leading equipment.
Bulk Oil Dispensing Units Eliminate shrinkage with accurate inventory control.
MSDSs are available for download through DealerNET. This product should not be used for purposes other than its intended use. If disposing of used product,
take care to protect the environment.
Bobcat Full Synthetic SAE 5W-40 Engine Oil is a multi-grade, all-season fluid that is formulated with the
highest quality base oils and superior additive technology. Designed to optimize machine performance year-
round, this lubricant contains improved antioxidants that boost oxidative stability to reduce engine deposits. Its
all-season composition ensures fluid will flow faster than standard grades during start-up, while also providing
maximum protection during extended use and extreme heat. This engine oil meets API CK-4 performance
requirements for use in all Bobcat machines.
For use where API Service CI-4, CH-4, CG-4, CF-4, CJ-4, CK-4, CF, SL, SJ, ACEA E5, JASO DH-1,
Mercedes-Benz Sheet 228.3, and Global DHD-1 is recommended.
• Premium engine oil for severe duty on and off highway and agricultural applications.
• Excellent soot control and oxidation resistance.
Available Sizes:
7403513 – 5W40 Quart, 12 qty.
7403514 – 5W40 One Gallon, 6 qty.
7403515 – 5W40 2.5 Gallon, 2 qty.
7415578 – 5W40 55 Gallon Drum, 1 qty.
7403516 – 5W40 330 Gallon Tote, 1 qty.
6904026 – 1 Gallon
(sold in multiples of 6, clear bottles)
6903117 – 2.5 Gallon
(sold in multiples of 2, clear bottles)
6903118 – 5 Gallon
6903119 – 55 Gallon
6904027 – 265 Gallon Tote
7326032 – 330 Gallon Disposable Tote
Bobcat Biodegradable Hydraulic/Hydrostatic Fluid is approved for Bobcat equipment manufactured after January 1, 2005.
Please advise your customers of the information provided in Service Letter 5122 when they purchase this product.
Note: See Service Letter 5122, Hydraulic/Hydrostatic Fluid for Bobcat Equipment.
IMPORTANT: Upon delivery, inspect the tote for damage prior to accepting. All damages must be clearly marked
on the bill of lading and a copy of damages along with photo documentation is required and should be maintained
by the dealership. A copy of the bill of lading with details of the damage must be immediately sent to Bobcat
Aftermarket Parts (fax 1-701-222-5346). Otherwise, the dealer will assume responsibility for the damage.
When the dealership has been debited for not returning the empty tote (undamaged) and returns it within
9 months of the shipment date to the dealer, the dealership will be credited $200 upon receipt of the empty tote.
When an empty tote is returned damaged, and the damage was not noted on the bill of lading and
communicated to Bobcat Parts as described above, the dealer will be debited $200 for the damaged tote
regardless of when returned.
NO CREDITS will be issued if tote is returned after 9 months of original delivery date to dealership.
When totes are empty, Bobcat Parts will pay return freight of the tote if the following method is used.
(note example on the following page)
1. Go to http://starrate.tranzact.com/StarRate/LoginForm.aspx?login=srvendor_bct
2. ORIGIN – Enter your dealership’s zip code
3. DESTINATION – Enter the zip code 55427
4. TOTAL WEIGHT – Enter 145 pounds as the weight
5. Be sure the LTL/TL button is selected
6. Click on LOOKUP ROUTING and then select carrier
7. Contact carrier to schedule pick up of the empty tote
Ship to: Bobcat Company Bill to: Bobcat Company (Freight Plan #33221)
C/O Lube Tech C/O Cass Information Systems
900 Mendelssohn Ave. N. PO Box 17621
Golden Valley, MN 55427 St Louis, MO 63178-7621
* Totes are the property of Bobcat Company. Totes are numbered to ensure accuracy in distribution and receiving. Credits will only be given to original purchasing dealership.
First Screen
Second Screen
Bobcat Parts offers funnels through the dealer merchandising program, giving
you added sales opportunities to your customers.
Excellent low temperature properties Responsive operation and effective lubrication in cold weather applications
Strong anti-wear and extreme pressure properties Reduces wear, extends equipment life, and reduces maintenance costs
Reduces deposits, extends seal life, and increases service life of equipment
Excellent thermal and oxidation stability
and lubricant
Bobcat Applications
• Front and rear differentials and transmission cases in Bobcat Part Numbers
4x4 Utility Vehicles 6687120 – Transmission/Differential Fluid 1 Quart (32 oz.)
• Front and rear axles of Bobcat D-Series 6988098 – Transmission/Differential Fluid 1 Gallon
Utility Work Machines 6988099 – Transmission/Differential Fluid 2.5 Gallon
• Transmission/Hydraulic/Hydrostatic System of Bobcat
Compact Tractors
• Front and rear axles of VersaHANDLER Telescoping
Tool Carriers
Regular drive motor oil changes are essential to prevent serious and costly damage. Ensure your equipment
delivers top performance by using genuine Bobcat drive motor oil. Bobcat drive motor oil is specifically
designed for Bobcat machines and is approved by Bobcat engineering.
• Superb protection from micro pitting fatigue wear as well as high resistance to traditional scuffing wear
reduces downtime and extends drive motor life compared to conventional oils.
• High viscosity index and outstanding extreme pressure (EP) properties means the oil will still lubricate
effectively in extreme temperatures and load conditions.
• Low traction oil reduces energy consumption and friction in low temperatures.
• Excellent resistance to rust and corrosion and very good demulsibility to repel moisture.
• Bobcat engineering approved for compact track loaders.
Bobcat Synthetic Gear and Bearing Oil is a supreme performance gear and
bearing oil designed to provide outstanding service in terms of equipment
protection, oil life and problem-free operation. Scientifically engineered and
formulated from base fluids with an inherently high viscosity index and a
unique, proprietary, additive system to provide outstanding performance in
extreme service applications at high and low temperatures, well beyond the
capabilities of mineral oils.
Compatible with most seals and materials used in equipment normally
lubricated with mineral oils.
6988438 – Bobcat Synthetic Gear and Bearing Oil, 16 oz. Sold in multiples of 4.
Whether you use Bobcat compact products, attachments or other types of equipment in your business, they require regular lubrication to ensure high performance and
minimal downtime. Your Bobcat dealer offers a choice of four different Bobcat-branded greases to protect machine components in a wide range of operating conditions.
• Excellent pressure capabilities • Extra high-performance lithium • Ultra high-performance extreme • Excellent pressure capabilities
• Heavy shock absorption complex grease with extreme pressure grease made with • Heavy shock absorption
pressure additives proprietary high-temperature
• Inhibits water wash-out • Inhibits water wash-out
• Excellent protection against rust, lithium complex thickener
• Corrosion protectants • Corrosion protectants
corrosion and water • 3% Molybdenum disulfide (Moly)
• Operating temperature from – 4°F • for excellent adherence to all • Operating temperature from – 4°F
• Superb adhesion, structural
(-20°C) to +2012°F (+1100°C) surfaces and resistant to softening, (-20°C) to +2012°F (+1100°C)
stability and resistance to water
• NLGI #2 washout ensuring good • NLGI #2 adhesion • NLGI #2
and cohesion
• Provides high-temperature
Performance performance in severe operating • Exceptional protection against wear Performance
conditions and under heavy and heavy shock loads in
• Excellent high-temperature, • Designed for extreme pressure use
shock loads wet conditions
high-speed performance; great for on equipment under heavy/shock
protection of lubricated equipment • Ideal for lube points with sliding and • Operating temperature from – 10°F loading, as well as mining and off-
pivoting movements (-23°C) to +350°F (177°C) highway applications
• Ideal for high-speed bearings and
ball joints • Regular re-greasing required • Long lasting stay-put grease
• NLGI #2 Seal Compatibility
• NLGI #2
Seal Compatibility • No known incompatibilities.
Performance Performance Typically used with off-highway and
• Good seal compatibility; protects
against degradation and swelling of construction equipment
• Highly adhesive and cohesive • Heavy-duty, high-impact contractor/
seal materials mining grease
structure for broad multi-
Drop Point
purpose application • Excellent water resistance and
Drop Point extreme pressure capabilities • 500°F (260°C)
• Less washout and
• 500°F (260°C) reduced maintenance • Ideal for exposed joints and
pivot points Color
• Excellent anti-wear and extreme-
Color pressure performance • Dark Grey
Seal Compatibility
• Green
Seal Compatibility • Contains polymer and moly to add
• Contains polymer to add tackiness tackiness to stay put
to resist “fling off” from grease
collar at seal/bushing Drop Point
• 500°F (260°C)
Drop Point
• Grey
Color
• Blue
6988782 – Deluxe Heavy Duty Pistol Grease Gun with 18" Flex Hose
• Deluxe Heavy Duty Pistol Grease Gun w/ 18" Flex Hose
• Convenience of one-hand operation for easy greasing
• 18" flex hose extension for hard-to-reach fittings
• Heavy duty, cast-alloy head
• Develops up to 7,000 PSI (480 Bar)
• Handy 3-way loading – standard cartridge, suction or bulk fill
• Maintains pressure and grease flow on short strokes in confined spaces
• Filler nipple with ball check for use with grease filler pump
• Air bleeder valve
• Rugged, chrome plated finish handle for maximum protection against corrosion
• Deluxe, oil-resistant, contoured grip for comfort and sure-handed grip
• Heavy gauge steel barrel (18 G / 1.3 mm)
• Tough, full-molded follower allows a superior seal and eliminates grease bypass
• Heavy duty follower spring for consistent priming
• Posi-lock follower rod with ergonomically designed T-handle provides positive grip
and easy filling at any position
• Four hardened jaws hydraulic coupler with ball check
• Non-drip cap
• Outputs 4 oz. (115 g) of grease per 100 strokes
Warning : Do Not hold whip hose while pumping the grease gun. Replace damaged whip hose with 4500 PSI (310 Bar) rated
hose only.
Part Number
6903983
(Sold in multiples of 2)
(Sold in multiple of 1)
(Sold in multiple of 1)
(Sold in multiple of 1)
Bobcat ® grease zerk kits contain an assortment of the most commonly used
grease zerks for Bobcat equipment. These 100 ct. kits come with multiple
quantities of zerks and are perfect for service trucks and shop use.
Your customers with large fleets will appreciate these practical kits too – and it’s
more economical than purchasing the zerks individually.
Increase sales by showing customers the full range of quality grease-related products Bobcat offers. Merchandise related products
together to increase purchases customers may not make unless the products are in front of them.
Put the grease zerk kits on your shelves with these other great products:
• Bobcat Grease Gun, Caddy, and Holder • Bobcat Grease Brochure
• Grease Joint Rejuvenator • Bobcat Gloves
• Premium Bobcat Grease
• Case Hardened Head only for extra durability and to protect them from wear due to
constant use
• Ball check in the head prevents dirt and grit from getting into the fitting
• Heavier wall thickness for extra strength
• Zinc Plated with Yellow Passivated finish, for maximum protection against corrosion
• Stress Relieved and Tempered Carbon Steel Spring
45H25 11H15 • Thread Rolled taper threads
• Designed to meet the demanding requirements of most Automotive, Agricultural,
Industrial, Marine, Truck, Federal, and, Construction Equipment needs
Information subject to change without notice. Please refer to BASS for most
38H25 6518200 up-date-Information.
By forcing light oil through, the Professional Model Grease Joint Rejuvenator ® opens
clogged grease joints and fittings in less than 1 minute.
PATENTS PENDING
The Pocket Model Grease Joint Rejuvenator ® works the same way as the Professional
Model, but is small enough to fit in your pocket. By forcing light oil into the joint, it flushes
out old, hardened grease and allows the new grease to be pushed through.
PATENTS PENDING
Gator Jaws™
The most versatile filter pliers for cars, trucks and heavy duty equipment.
The Gator Jaws with powerful grip and 32 teeth grabs hold of a filter and loosens it from a
variety of angles without slipping.
6988804 – Small, Fits filters from 2 7/8" to 3 1/2" (73 to 89 mm) Dia.
Sold in Multiples of 1
6988806 – Economy, Adjustable Filter Wrench,
Sold in Multiples of 1
6988806
• Low silicate and low total dissolved solids coolant Bobcat PG Antifreeze
• Phosphate-free formula with patented stabilizers 6983129 – 1 Gallon Concentrate
• Precharged with high quality supplemental coolant additive 6983127 – 55 Gallon Concentrate
• PG formula is substantially less toxic then EG (ethylene glycol) based antifreeze 6983128 – 1 Gallon Premixed
NOTE: Do not use an ethylene glycol hydrometer to test propylene glycol base coolants.
Note: Do not mix PG & EG Antifreeze. This causes a significant increase in freeze point.
A multi-functional fuel additive product to improve diesel fuel quality and maintain maximum
engine performance in today’s modern engines.
7295308 16 oz. (473 ml) per bottle 12 Each bottle treats 125 gallons (473 L) of diesel fuel
7295309 1 gallon (3.78 L) per bottle 4 Each bottle treats 1,000 gallons (3,785 L) of diesel fuel
7295310 16 oz. (473 ml) per bottle 12 Each bottle treats 50 gallons (189 L) of diesel fuel
7295311 1 gallon (3.78 L) per bottle 4 Each bottle treats 400 gallons (1,514 L) of diesel fuel
2. There are many brands of fuel additives available over-the-counter as well as through fuel distributors. Why should I use Bobcat ALL-TIER Diesel Fuel
Additive?
Bobcat ALL-TIER Diesel Fuel Additive is a proprietary blend, chosen by Bobcat engineers after testing other available additives. There are no national fuel additive
standards, and some additives on the market today provide little or no value. Bobcat ALL-TIER is the only choice proven to provide the level of performance expected from
the Bobcat brand.
3. Is Bobcat ALL-TIER Diesel Fuel Additive recommended for use in all types of diesel equipment?
Bobcat ALL-TIER Diesel Fuel Additive improves the diesel fuel itself, which makes any engine run better and last longer. New engines will enjoy these benefits right from
the start. Legacy engines, including pre-Tier III, along with Tier III & Interim Tier IV, will run better after just a few fill ups. Bobcat ALL-TIER Diesel Fuel Additive can be
used in any diesel-powered equipment – Bobcat or other makes – on or off the farm, jobsite, or highway.
4. Can Bobcat ALL-TIER Fuel Additive be added to my bulk fuel storage tank?
Absolutely! Treating fuel as it is added to the bulk fuel storage tank is the optimal solution for ensuring your fuel gets a quality treat and mix. As an added benefit, Bobcat
ALL-TIER contains a fuel stabilizer to maximize fuel storage and filter life, and to protect your bulk fuel storage tank from corrosion. Please note: for best mixing results,
add Bobcat ALL-TIER Diesel Fuel Additive to the bulk tank prior to adding the diesel fuel.
5. Why does Bobcat offer both Summer and Winter All-Tier formula?
While both formulas offer the same important detergents, anti-foulants, and other components that maximize engine performance, Winter Formula includes additional
ingredients to prevent fuel gelling, wax settling, and fuel filter plugging. These added ingredients make Winter formula cost more per treated gallon. Summer formula can
be used the majority of the year when you are certain the temperature will not drop below freezing.
6. Why is my treat rate for the Winter All-Tier Diesel Fuel Additive so much higher than my Summer treat rate?
Winter diesel fuel additive contains all of the components of the Summer formula plus a robust group of winter ingredients to provide cold temperature anti-gel protection
along with wax dispersion. Due to the additional ingredients in the winter formula, it requires a higher treat rate than the summer formula as you are adding more
components into each gallon of diesel fuel. However, it is important not to over-treat. More is not better when it comes to additives. You will not see increased benefits by
over-treating above the recommended treat rate. The 16oz bottles are designed with a fill neck so you can measure the additive you are putting into your tank.
Summer 16 oz. (473 ml) per bottle Each bottle treats 125 gallons (473 L) of diesel fuel
Summer 1 gallon (3.78 L) per bottle Each bottle treats 1,000 gallons (3,785 L) of diesel fuel
Winter 16 oz. (473 ml) per bottle Each bottle treats 50 gallons (189 L) of diesel fuel
Winter 1 gallon (3.78 L) per bottle Each bottle treats 400 gallons (1,514 L) of diesel fuel
7. Why does the Winter formula have to be added when the fuel is above the cloud point?
Diesel fuel contains wax that begins to form crystals at the cloud point of fuel. These crystals will continue to grow in size until the filter plugs and the equipment shuts
down. Adding winter formula when the fuel temperature is at least 15 degrees F above the cloud point of the fuel offers the optimum benefit from the “wax crystal modifier”
or anti-gel used in Winter Formula.
8. Why does the Winter formula gel in the bottle when it gets cold?
All fuel additives that contain large amounts of “anti-gel” will thicken in their concentrated form (prior to mixing with diesel fuel) at cold temperatures. Fuel additives that
don’t thicken contain little or no anti-gel components. Winter Formula contains a large amount of antigel and will outperform most competitive products. To prevent gelling
of Bobcat ALL-TIER Winter Formula, store the bottle at or above 50 degrees F. If the product has gelled in the bottle, thaw it out and agitate, then add it to the diesel fuel.
Reduce engine damage from fuel contamination with a new Bobcat Bulk
Fuel Filtration Kit. Increasingly stringent emissions regulations have caused
engine designs to become less tolerant of fuel contamination and free water.
In response to these conditions, Bobcat now offers Bobcat Bulk Fuel Filtration
Kits* that will help ensure the fuel put into your customers’ equipment meets
the engine manufacturers’ recommended cleanliness and water content levels.
*These kits are recommended for all diesel and biodiesel blends.
View Bobcat Service Letter #5345 for additional information on fuel
filtration recommendations.
Clean Diesel Fuel Filter Kit
Bobcat offers two types of bulk fuel filtration kits: PN: 7409001
Available Size:
7446446 – FLUID, DEF 2.5 GAL (2) Sold in multiples of 2
6983247 – Bobcat Low VOC Brake & Parts Cleaner 6988074 – Bobcat Battery Cleaner and Protector
Use Bobcat low VOC Brake and Parts Cleaner for maintenance, Advanced formula performs four applications in a single
repair, or assembly work. Removes and loosens oily dirt, grease product: Cleans, detects acid, neutralizes acid, and protects
and silicone on brake disks, clutch parts, gearbox parts, ropes, against corrosion. For use on batteries, terminals, cables,
tool parts and more. Abrasive dust is bonded and washed brackets, and housings.
away. Spraying action helps reach difficult to reach areas, dries
• Yellow foam turns pink in the presence of acid
quickly, and leaves no residue.
• Additives help Neutralize pH to a safer level
• Low VOC formula
• 15 oz. spray can
• Hexane Free
• 14.39 oz. spray can 6983254 – Bobcat Starting Fluid
Bobcat Starting Fluid is the perfect solution for engines that
6983252 – Bobcat Silicone Lubricant won’t start in cold, wet, and freezing temperatures. Contains
All purpose high-quality silicone spray with good slide, divide lubricants and anti-corrosion additives. Saves time, along with
and lubricating properties, Good material compatibility and high battery and cylinder wear. High ether content.
temperature resistance. Stops squeaks and doesn’t dry out.
• 7.8 oz. spray can
• 11.28 oz. spray can
6983250 – Bobcat Penetrating Oil with P.T.F.E. Advantage
6983251 – Bobcat Engine Wash Cleaner & Degreaser Bobcat Penetrating Oil stops squeaks and frees sticking parts.
Fast Acting – Effectively cuts through grease and grime build-up P.T.F.E. increases lubrication efficiency and fluidity. Multi-
on all engines, housings, and metal surfaces. purpose product: loosens, lubricates, protects, and drives
out moisture.
• Features Spray-all-way valving
• Non-chlorinated • 5.3 oz. spray can
Check local laws and regulations to ensure all chemicals are legal for sale in your area. All products sold in a case of 12.
Loctite
Choose from a full line of Loctite branded threadlockers, gasket makers, sealants, lubricants, and adhesives and provide Bobcat
recommended Loctite products to your customers.
*These products are for US dealers only.
Part No. 6987928 Qty: 12 Part No. 6987926 Qty: 12 Part No. 6987929 Qty: 12 Part No. 6987938 Qty: 12
RTV 587 Silicone Blue RTV Silicone 598 – High Dielectric Blue Stick Threadlocker –
Gasket Maker – High Performance Performance Black Tune-up Grease Medium Strength
80 ml tube 80 ml tube 80 ml tube 9 g stick
Forms tough, flexible gaskets For dealership warranty Provides a moisture-proof barrier Anaerobic threadlocker in a wax-
directly on the flange. Sensorsafe, requirements, fast-curing, for that lubricates and protects electrical like stick applicator. Wellsuited for
low odor, non-corrosive. Flexible and valve covers, oil pans, intake connections from salt, dirt, and difficult, overhead applications. For
oil resistant. manifold end seals, timing covers, corrosion. Prevents voltage leakage. valve cover bolts, drive shaft bolts.
transmission pans.
Part No. 6987940 Qty: 12 Part No. 6987942 Qty: 12 Part No. 6988047 Qty: 6 Part No. 6988009 Qty: 10
Red Stick Threadlocker- Gasket Maker 515 – Threadlocker 277 QuickTape 249 Threadlocker
High Strength Anaerobic Heavy Duty / Large Bolts Medium Strength
9 g stick 50 ml tube 260" Roll
High strength threadlocker in a Flexible, gasketing material for High strength adhesive for locking The one and only threadlocker in
wax-like stick applicator. Suited use on rigid machines flanges. large bolts and studs. 36 ml bottle tape form. Convenient, durable
for heavy-duty applications where OEM approved. Use where 515 package is a must for every tool box.
resistance to heavy shock, vibration, or anaerobic is specified (cures in
and stress levels is required. adbsense of air).
Part No. 6988012 Qty: 10 Part No. 6988018 Qty: 6 Part No. 6988019 Qty: 6 Part No. 6989127 Qty: 10
Loctite
Choose from a full line of Loctite branded threadlockers, gasket makers, sealants, lubricants, and adhesives and provide Bobcat
recommended Loctite products to your customers.
*These products are for the Canadian dealers only as the labels are printed in French.
Part No. 6983294 Qty: 12 Part No. 6983286 Qty: 6 Part No. 6983289 Qty: 6
RTV Silicone Clear Threadlocker 262 High Strength Super Glue Instant Adhesive
80 ml tube 36 ml bottle 2 g tube
Adhesive, indoor/outdoor sealant. Seals, A permanent, high strength, red threadlocker Super strong, super fast adhesive that bonds
bonds, repairs, mends and secures glass, applied to fasteners before assembly. Secure materials in seconds, including rubber, metal,
metal, fabric, vinyl, weatherstripping, and vinyl parts that must withstand heavy shock, plastic, glass, and vinyl.
tops. Protects and repairs wiring vibration, or extreme conditions
Part No. 6983281 Qty: 12 Part No. 6987909 Qty: 6 Part No. 6987908 Qty: 12
Part No. 6983296 Qty: 12 Part No. 6983291 Qty: 6 Part No. 6983262 Qty: 10
• Email – Support@poweroffoam.com
• Phone – 1-888-996-7801 ext.10
• Website – www.poweroffoam.com
What are the space requirements necessary to mount the Power of Foam Wall Mount Unit?
The footprint is nothing more than that of a 55 US gallon drum that sits directly below the wall mounted foam unit. The foam unit
should be mounted approximately 52-inches off the ground, enough so that the suction line reaches the bottom of the pre-mix drum.
Four anchor bolts (included with the wall mount unit) must be drilled to mount the foam unit. The hose bracket should be mounted in
such a way to keep the hose off the ground when not in use.
I have the Power of Foam Wall Mount Unit, I need additional product, what do I do?
Additional product can be ordered directly through Bobcat – The 5 US gallon pail of Dakota Wash HD Concentrate (Bobcat Part No.
7307942) is formulated to be mixed in the removable-top drum (included in the Dakota Wash HD Complete Foam Package) with
50 US gallons of soft or reverse osmosis water.
Cement Remover
For a safe and effective way to remove cement, slurry, lime, and scale build-up.
• Fast acting
• Will soften cement, slurry, lime, and scale
• Can be applied with standard garden sprayer
• Will not harm glass or paint
What is the 1 Gallon Power Cannon Dakota Wash HD Starter Package and why should I buy it?
It allows you and your customers to use a time-saving foam pressure washer attachment and cleaning solution to soften buildup on
equipment, machinery, or vehicles with minimal effort.
How much can I expect to clean with 1 Gallon of Dakota Wash HD Super Concentrate?
Depending on the severity of the grease/grime buildup, you can expect to clean a:
Note: These are approximations only and will vary depending on the severity of the job, we recommend maintaining a regular cleaning
schedule to reduce time, effort, and product usage.
What cleaning solution should I use with the Power Cannon attachment?
We recommend our specially formulated Dakota Wash HD Super Concentrate [P/N 7307941] foaming cleaner and degreaser to be
used with the Power Cannon attachment.
How do I use the Power Cannon attachment?
Just fill the 32 fl oz. (1 L) fluid bottle with Dakota Wash HD Super Concentrate (do not dilute), remove the quick-connect spray nozzle,
and attach the Power Cannon to the end of the wand. Turn on the pressure washer and foam the surface. Once the foam has been
applied, replace the spray nozzle when ready to rinse.
Do I need to avoid any kind of surface when using Dakota Wash HD?
No, Dakota Wash HD (Super Concentrate) is formulated to soften buildup on all surfaces, including engine compartments, safely and
effectively. It will not harm the coating, the surface, electrical connections, or hydraulic hoses when used as directed.
Once the foam has been applied, how long should I wait before rinsing?
You should allow sufficient dwell time for the Dakota Wash HD foam to soften tough buildup on the surface. 1-2 minutes is all that is
required for light buildup. Depending on the severity, the process may need to be repeated.
Should I be concerned about the personal and environmental effects of applying Dakota Wash HD foam?
No, when applied as directed, the diluted, ag-powered Dakota Wash HD is user friendly, biodegradable, and environmentally safe.
(As is common with most super concentrated formulations out there, we recommend taking certain precautions when handling the
undiluted, Super Concentrate to avoid release to the environment and possible skin or eye irritation.)
How much Ready-To-Use product will 5 US gallons of Dakota Wash HD Concentrate yield?
5 US gallons of Dakota Wash HD Concentrate (Part No. 7307942) when properly mixed with 50 US gallons of soft or reverse
osmosis water will yield 55 US gallons, or one drum, of Dakota Wash HD Ready-To-Use (Part No. 7307943).
Do I need Power of Foam’s foaming unit to clean with Dakota Wash HD?
For optimum results we recommend the Power of Foam Wall Mount Unit to foam and
apply Dakota Wash HD. The wall mount foam unit draws from a 55 US gallon drum of
pre-mixed Dakota Wash HD. We highly recommend Power of Foam’s Dakota Wash HD
Complete Foam Package (Bobcat Part No. 7307945) as a starting point. This product is
eligible for merchandise credits (see the Parts Policy and Procedure Manual for details.)
What are the space requirements necessary to mount the Power of Foam Wall Mount Unit?
The footprint is nothing more than that of a 55 US gallon drum that sits directly below the wall mounted foam unit. The foam unit
should be mounted approximately 52-inches off the ground, enough so that the suction line reaches the bottom of the pre-mix drum.
Four anchor bolts (included with the wall mount unit) must be drilled to mount the foam unit. The hose bracket should be mounted in
such a way to keep the hose off the ground when not in use.
I have the Power of Foam Wall Mount Unit, I need additional product, what do I do?
Additional product can be ordered directly through Bobcat – The 5 US gallon pail of Dakota Wash HD Concentrate (Bobcat Part No.
7307942) is formulated to be mixed in the removable-top drum (included in the Dakota Wash HD Complete Foam Package) with 50
US gallons of soft or reverse osmosis water.
• Email – Support@poweroffoam.com
• Phone – 1-888-996-7801 ext.10
• Website – www.poweroffoam.com
Application Instructions:
1. Wipe dipstick clean and dry using a clean cotton rag
(remove any residual paste from prior dipping operations)
*Gasoila Water Finding Paste comes in a 24pc Point of Purchase Display Case
The Fluid Analysis Program provides the added knowledge of operating conditions, and provides warning flags
to problems before they become expensive repairs.
The state-of-the-art fluid analysis identifies the dirt, wear particles, fuel dilution and coolant contaminants that
can appear in fluid systems. These contaminants are key indicators of issues that can significantly shorten
equipment life, or cause catastrophic failure.
If you have customers who can’t afford to have their equipment break down, or if your dealership needs a good
maintenance program for rental equipment, fluid analysis is a good maintenance practice to add.
Program Features:
• Available for all Bobcat Compact Equipment
• (Also available for non-Bobcat vehicles)
• Online reporting options
• One sample kit for both engine and hydraulic fluid
• Reduced price of hydraulic testing
• Sampling tools to help you get the job done right
• Fast lab turnaround time
Getting started is quick and easy. Bobcat has all components needed for you to offer the program in
your dealership:
Description Part #
Oil Analysis Starter Kit (Includes 2 oil analysis kits, 2 pieces of 54 in. tubing and 1 vacuum pump) 6988058
Oil Analysis Kit (For use with all types of oil) 6988061
Taking Samples
The equipment manufacturer’s maintenance recommendations provide a good starting point for developing
preventative practices, but sampling intervals can easily vary. How critical a piece of equipment is to production
along with environmental factors such as: hot, dirty operating conditions, short trips with heavy loads and
excessive idle times can all be factors in determining sampling frequency.
Fluid analysis is most effective when samples are representative of typical operating conditions. Dirt, system
debris, water and light fuels tend to separate from the lubricants and coolants when system temperatures cool.
For optimum results, consider the following best practices:
Best Practices:
• Take samples while systems are operating under normal conditions or immediately after shutdown while
fluids are still at operating temperature.
• Take samples from the same sampling point each time.
• Take samples at regularly scheduled intervals to develop a trend analysis. Monitoring test data taken over
an extended period of time provides the information you need to continually maximize asset reliability and
ultimately, increase profits.
User Information:
To setup your login and password, or for technical questions or assistance, please contact the Bobcat Fluid
Analysis hotline at (866) 886-5564.
For more information regarding the Bobcat Fluid Analysis Program, please contact your Customer Service
Representative or Field Parts Manager.
Fluid Analysis Brochure is available to order through the Literature section on DealerNet.
Many diesel engine equipment problems can be traced back to the quality of diesel fuel. Smoking, clogged filters and loss of power
can be avoided by catching and addressing poor fuel quality when it is still in the bulk refueling tank.
Diesel fuel quality can degrade during storage for many reasons:
However, diesel fuel analysis can help identify quality problems so the fuel in the tank can be salvaged.
Test Kits
Bobcat offers fuel analysis kits customized to your needs. The basic kit tests for the various contaminant types. The advanced kit also
does this, plus it tests for key criteria related to cold weather operation. Use these to confirm the quality of your bulk supply, and share
availability of these kits with your customers who have bulk systems or desire to sample fuel supplied at the pump from a retailer.
• Troubleshooting – Test fuel based on the problems observed when used in engines:
- Cleanliness
- Contamination
- Filter Plugging
- Smoking
• Wear Prevention – Identifies water and particulate contamination..
• Fuel Quality – Evaluates if a fuel meets manufacturer specs for summer and winter blends.
• Biodiesel – Assess common problems with biodiesel blends, such as water contamination, bacteria, fungi, and mold.
Harmful contaminants can be detected through fuel analysis. Extend the life of your filters and maximize your savings by
using an effective fuel analysis program to identify contaminants, such as:
• Wax crystals
• Water
• Asphaltines
• Bacteria, fungi and mold
API Gravity X
Calculated Cetane Index X
Distillation X
Cloud Point X
Pour Point X
Thermal Stability X
Comments and
recommendations highlight
test results of most
importance and provide a ASTM specifications are
suggested course of action listed based on the fuel type
when needed. These designated. The maximum
results indicate low thermal ppm for Ultra-Low sulfur
stability and the use of an Diesel #2 is 15ppm.
asphaltine conditioner was
the recommended course
of action.
Maintenance kits for R-Series and M-Series loaders offer an easy, one-step
process to order maintenance parts based on the machine’s service hour
intervals, sourced directly from the service manual. Included with the filters,
seal and cap is a list of recommended fluids and lubricants, as well as the fluid
capacities. Maintenance kits are a convenient tool for the service department
and your do-it-yourself customer.
You can find the maintenance kit part number for each service interval
in the Online Parts Catalog.
• 0.5 oz.
• Brush wiper insert removes excess paint and
prevents product spillage when turned upside down.
• Each contains two small mixing balls for thorough
product blend.
• Available in Bobcat orange, charcoal, white and red.
WEIGHT
PART NO. DESCRIPTION QTY
(oz.)
6736641 Paint, Charcoal 0.5 oz. 0.5 1
WEIGHT
PART NO. DESCRIPTION QTY
(oz.)
7258943 Paint, Ground Marking White 20 12
Order the latest Bobcat products online at the Bobcat Parts official merchandise website:
Bobcatstore.com
To get started, click on Dealers & Employees > Shop Here in the upper right-hand corner.
FEATURED PRODUCTS
Carhartt Cotton Canvas Cap Women’s Hybrid Full Zip Jacket - Black Contigo Tumbler - 18 oz. The North Face Hoodie - Taupe Green Heather
Safety Products
Safety Products
Safety Glasses
Safety Products
Traffic Cones
Designed to make order taking from customers easier and more accurate.
Use of these forms at your parts counter gives your parts department a
professional look.
The set of 9 appliqués features Bobcat compact equipment in action along with four individual Bobcat logos.
Approximate size of each wall appliqués is 9" x 6". (Note: Logos are smaller.)
The appliqués are removable and repositionable. Decals must be applied to clean, smooth wall surfaces in
good condition. The decal should be applied to flat, interior walls for maximum performance.
Part number: 6988679.
WARNING:
CHOKING HAZARD – DO NOT place decals in or above cribs or within reach of young children.
DO NOT mount decals where they can be removed by young children as a choking hazard can result.
Whether your customer is looking for a bucket or suspension seat, cloth or vinyl, Bobcat Parts can supply you
with replacement seats for your customer’s every need. In addition, Bobcat Parts stocks seat component repair
parts and kits for most inventoried seats. Check individual parts books for complete component diagrams and
parts lists. Below is a listing of seats, some of the cushion components available and the model numbers
they fit.
Articulated Loaders
HEADREST WHOLE
MODEL SERIAL NUMBER SEAT CUSHION # SEAT BELT
CUSHION # ASSEMBLY #
A01L11000
AL275
ADBH11001
A01M11000
AL350
ADBJ11001
5305670236 5305670007 5305670217 5305661730
A01N11000
AL440
ADBK11001
WL350 120000B81
WL440 120000A98
Backhoe Loaders
WHOLE
MODEL SERIAL NUMBER SEAT PART #
ASSEMBLY #
570011001
B100
572111001
B200 570211001
570211001
B250
572211001
570811001
BL275
572411001
571311001
B300 6963032
572311001
570441001
BL370
572741001
BL375 570411001 6964123
BL470 570511001
BL475 570511001
570611001
BL570 6969433
572611001
BL575 570611001
Information is subject to change, please check OPC for most current information.
Loaders
MODEL SERIAL NUMBER SEAT ASSEMBLY CLOTH #
310 499611001 6591890
313 500113001
6552858
371 485311001
Information is subject to change, please check OPC for most current information.
Loaders
SEAT BACK
SERIAL SEAT CUSHION SEAT ASSY SEAT ASSY
MODEL CUSHION SEAT BELTS
NUMBER CLOTH # CLOTH # VINYL #
CLOTH #
49501001
600 6659999 –
49541001
610 4956M11001 –
6630468 6630465 6675074 6669135
611 4960MA11001
620 4970A1001
630 499511001
6630468 6675074
631 4977M11001
632 499311001
641 501311001
642 501411001 6630468 6630465 6675074 6669135
643 501513001
645 510511001 6674019
653 514811001 6669135 6669135
Information is subject to change, please check OPC for most current information.
Loaders
SERIAL SEAT CUSHION ASSEMBLY
MODEL SEAT BELTS
NUMBER CLOTH # CLOTH #
501911001
5025M50001
743
509311001
509318001
514711001
751 515611001
515620001
6630468 6675074 6533141
508611001
508690001
753 512211001
508630001
515830001
512212001
763
512250001
Information is subject to change, please check OPC for most current information.
Loaders
SEAT SEAT SEAT BACK SEAT BACK SEAT SEAT
SERIAL SEAT
MODEL CUSHION CUSHION CUSHION CUSHION ASSEMBLY ASSEMBLY
NUMBER BELTS
CLOTH # VINYL CLOTH # VINYL # CLOTH # VINYL #
502012999
502613001
843
503724001
503760001
508411001 6630468 6630465 6675074 6669135
853 508415001
508418001
514411001
863
51444001
516911001 6672727 6672729 6675074 6674019
864
516811001 6675320 6675322 6675319 6675321 6675170 6675596 6675595
514111001 6630468 6670160 6630465 6675074 6669135 6669135
873
514140001
6675320 6670160 6675321 6675319 6675170 6675596 6675595
883 520111001
Information is subject to change, please check OPC for most current information.
Loaders
SEAT SEAT SEAT BACK SEAT BACK SEAT SEAT
SERIAL SEAT
MODEL CUSHION CUSHION CUSHION CUSHION ASSEMBLY ASSEMBLY
NUMBER BELTS
CLOTH # VINYL CLOTH # VINYL # CLOTH # VINYL #
521111001 6675320 6675322 6675319 6675321 6675170 6675596 6675595
521111001 6670150 6675170 6675595
523411001 6675320 6675322 6675319 6675321 6675170 6675596 6675595
523411001 6670150 6675170 6669135
A300
539911001 6675320 6675322 6675319 6675321 6675170 6675596 6675595
539911001 6670150 6675170 6669135
5GW11001 6675320 6675322 6675319 6675321 6675170 6675596 6675595
5GW11001 6670150 6675170 6669135
7010336 - 7010338 - 7149786 -
A3P611001 7168172 - 3"
80mm 80mm 80mm
A770
7010335 - 7010338 -
A3P611001 7128405 - 2" 7167603 - Air
AIR AIR
Information is subject to change, please check OPC for most current information.
Loaders
SEAT SEAT SEAT BACK SEAT BACK SEAT SEAT
SERIAL SEAT
MODEL CUSHION CUSHION CUSHION CUSHION ASSEMBLY ASSEMBLY
NUMBER BELTS
CLOTH # VINYL CLOTH # VINYL # CLOTH # VINYL #
517625001
525011001
S185
530311001
A3L911001
528411001
S205 530511001
A3LJ11001
523211001
S220 530711001
A5GK11001
520711001
521311001
S250
530911001 6675320 6675322 6675319 6675321 6675170 6675596 6675595
A5GM11001
521311001
S300 531111001
A5GP11001
A02011001
S350
A5HA11001
S630 A3NT11001
S650 A3NV11001
S70 A3W611001
S750 A3P211001
S770 A3P411001
S850 ACS711001
Information is subject to change, please check OPC for most current information.
Loaders
SEAT SEAT SEAT BACK SEAT BACK SEAT SEAT
SERIAL SEAT
MODEL CUSHION CUSHION CUSHION CUSHION ASSEMBLY ASSEMBLY
NUMBER BELTS
CLOTH # VINYL CLOTH # VINYL # CLOTH # VINYL #
T110 AE0H11001
527111001
T140 529311001
A3L711001
524211001
T180 531411001
A3LL11001
519311001
527711001
T190
531611001
A3LN11001
T200 516811001
6675320 6675322 6675319 6675321 6675170 6675596 6675595
523011001
T250 531811001
A5GS11001
521911001
T300 532011001
A5GU11001
T320 A7MP11001
T630 A7PU11001
T650 A3P011001
T750 ANKA11001
T770 A3P811001
T870 A3PG11001
Information is subject to change, please check OPC for most current information.
Excavators
SEAT SEAT BACK ARM SEAT
SERIAL ARM HEAD REST SEAT
MODEL CUSHION CUSHION CUSHION ASSEMBLY
NUMBER CUSHION CLOTH # BELTS
CLOTH # CLOTH # LH CLOTH #
504911001 6642152 6642845
100
504912001 6639388 6638802 6642613
505011001 6639388 6638802 6642934
6639388 6638802
116
505012001 6671066 6671065 6642613
Vinyl Vinyl
6643102
130 505111999 6639388 6643104 6643106 6639382 or
6639383
6599518 &
508211001 3737010 3737081 – 6713061 6632388
6599518
220 508211501
3737010 3737081 6713061
508212001
508215001
3737010 3737081 6713061 6632388
508311001
225
508312001
3737010 3737081 6656006 6713061 6632388
231 508911001
Information is subject to change, please check OPC for most current information.
Excavators
SEAT SEAT
SEAT SEAT HEAD HEAD SEAT SEAT
MODEL
Information is subject to change, please check OPC for most current information.
Excavators
SERIAL SEAT CUSH SEAT BACK SEAT ASSY SEAT ASSY
MODEL SEAT BELTS
NUMBER CLOTH # CUSH CLOTH # CLOTH # VINYL #
418 AB4711001 7000805 7000804 7143563 7180305
A1HW11001 7175003 6685657
425
A9K311001
6685657 or
A1WH11001 6670865
428 7175003
A9K311001
562511001
562911001
430 563011001
AA8711001
AA8811001
7221147 6685657
562611001
563111001
435 563211001
AA8911001
448A11001
SEAT BACK
SEAT CUSHION SEAT ASSEMBLY
MODEL SERIAL NUMBER CUSHION SEAT BELTS
CLOTH # CLOTH #
CLOTH #
522311001 – – 5305639665 5305661700
528611001
442
528611477 5305670188 5305670188 5305639665 5305661655
ADBR11001
532211001 – – 5305639665 5305661700
444
ADBT11001 – – 5305639665 5605661700
504711001
56
504712001
504811001
76
504812001
E08 A4BP11001
7000805 7000804 7143563 7180305
E10 A33P11001
E14 AHNM11001 7143563 7110397
Information is subject to change, please check OPC for most current information.
Excavators
SEAT SEAT SEAT BACK SEAT BACK SEAT SEAT
SERIAL SEAT
MODEL CUSHION CUSHION CUSHION CUSHION ASSEMBLY ASSEMBLY
NUMBER BELTS
CLOTH # VINYL CLOTH # VINYL # CLOTH # VINYL #
E32 A94H11001 7012626 7012624 7012625 7012623 7015677 7169360 7157550
E35 A93K11001
E42 AG3411001
7012626 7012624 7012625 7012623 7012344 7169360 7157550
E45 AG3G11001
E50 AG3N11001
Compaction
MODEL SERIAL NUMBER SEAT PART # SEAT BELT #
BCA12 491611001
IR59142174
BCA14 491711001
491911050 IR54670302 IR59227561
BCA24
491911099 IR13328125 IR59227561
Compact Tractor
SEAT SEAT SEAT WHOLE WHOLE
MODEL
Information is subject to change, please check OPC for most current information.
Toolcat
FRONT FRONT
FRONT DRIVERS
BACK SEAT SEAT PASSENGER
MODEL
Utility Vehicle
FRONT SEAT FRONT SEAT BACK SEAT FRONT SEAT
MODEL
SERIAL
MODEL SEAT PART # SEAT VINYL PART # SEAT CLOTH PART # SEAT DELUXE PART#
NUMBER
3200 AJNS11001
AJNT11001
3400
AJNU11001
7017431 7023380 7023117 7195885
AJNW11001
3400XL
AJNV11001
3450 AJNY11001
Information is subject to change, please check OPC for most current information.
Telescopic Handler
MODEL SERIAL NUMBER SEAT BELTS SEAT ASSEMBLY CLOTH #
TL360 AN6H11001
TL360 AN6H11001
TL470 ANL711001
7192717 or
TR35160 LLM1590000 7021078
7190699
TR40250 HVL1560000
TR45190 HVL1540000
TR50210 HVL1550000
VersaHandler TTC
FRONT
FRONT BACK SEAT SEAT
SERIAL SEAT SEAT BUCKET
MODEL SEAT SEAT BACK ASSEMBLY
NUMBER BELTS BELTS SEAT
CUSHION # CUSHION CUSHION # VINYL
FRONT #
V417 A7MK11001 7003346 7003358 7003352
V417 AC1C11001 6919587 7003352 7003358
V518 367011001 7019021 97142-4 97081-4 98629-9
V518 367611001
V518 367612001
V518 A8G811001
V623 367111001
V638 A2ZV11001
V638 A8HM11001
V723 367811001
V723 367812001
V723 A8HK11001 97141-6 97142-4 97081-4 98629-9 6909060
VR518 364611001
VR518 364612001
VR530C 364811001
VR530C 364812001
VR638 365011001
VR638 365012001
VR723 364811001
VR723 364812001
Information is subject to change, please check OPC for most current information.
Bobcat seat covers use premium quality fabrics to provide the best protection and performance.
• Top surface composed of 600 denier polyester and two coatings of polyurethane.
• Bottom surface composed of genuine automotive vinyl.
• Highly water resistant.
Features:
• Waterproof front panel and chassis (IPx6)
• Corrosion and UV resistant materials/finishes
• Bluetooth® caller ID phone number for incoming calls
• Bluetooth® playback (A2DP) and controls (AVRCP)
• Hands-free phone calling via Bluetooth (external mic sold
separately - 7346490 or 7346479)
• Electronic US/Euro AM/FM tuner
• AM/FM ready with programmable station presets
• Sirius XM-Ready ®
• iPod/iPhone ready via USB
• 7-channel NOAA Weatherband with Weather Alert
• Built-in 12/24-Hr. clock with work timer
• Universal Mounting Provisions (AMPS Pattern)
• Rear headphone output panel mount (female 3.5 mm)
• Non-Volatile Memory
• 2-Ch amplified audio output
Deutsch
connector • FCC and e-mark certified
• Auxiliary audio input
External mic options
• Amber button illumination and white display back-light
• 12V DC power
7346490 7346479
Note: This model of the mini stereo does not have an in-line fuse
in the wiring. It should be used with wiring harnesses that have
a fuse, or use 6988659 adapter to add the fuse.
Notice: Do not connect stereos directly to the battery. Stereos feature alerts which can turn on stereo and cause the battery to drain.
7025618
Features
• 12V DC Power • Clock runs up to 30 days when vehicle battery is disconnected
• AM/FM electronic tuner (US/Euro) • Corrosion and UV-resistant faceplate
• Front and rear panel audio AUX-in for use with iPods, MP3 • 30 programmable station presets (18FM, 12AM)
players & portable CD players • Built-in job site work timer
• Listen to music your own way through Bluetooth enabled • Electronic seek up/down/volume/bass/treble/balance
stereo headphones or built in 15 watt stereo amplifier
• 12/24 hour clock
• Works with most factory installed speaker/antenna systems or
• Backlit controls with selectable amber or green illumination
our JENSEN speakers (antenna sold separately)
colors
• 7-Channel NOAA weatherband tuner
• Daylight readable display with wide viewing angle
• Weather Alert automatically switches to WB mode when
• One-touch audio mute
NOAA warning broadcast is received
• Dimensions: 5-3/16"W x 3-3/8"H x 1-7/8"D
• 2-wire connection prevents battery drain when vehicle is not
in use
Notice: Do not connect stereos directly to the battery. Stereos feature alerts which can turn on stereo and cause the battery to drain.
Features:
• Play your iPod, MP3 or other portable music player through the
convenient front mini-jack input with included 6 foot patch cord
• 12 Volt DC system-No batteries to recharge or replace. Simple
2-wire system allows for a speedy hook up. All necessary parts are
included and the do-it-yourself installation is easy.
• Completely weatherproof-built to withstand any environment-even
water, rain, and dirt.
6983067 • NOAA weatherband lets you get the latest local weather at the
6 Pack Order# 6983078 touch of a button-weather alert feature automatically turns on to
warn you of severe weather conditions.
• Listen to music your own way-through any stereo headphones with
3.5 mm jack or through the built-in 15 Watt dual speaker amplifier.
• Works with most factory installed speaker/antenna systems or our
Jensen speakers, headphones, and antennas sold separately.
• Keep track of your work time with the built-in jobsite work timer-
start, stop and pause the timer and recap your entire job time at
the end of the day.
• Selectable backlighting in amber or green for a clear view either
9 pin Cadillac- day or night.
Hoffman Connector
• Super cap memory saves time for up to 30 days with battery
disconnected.
• Size: 5"W x 3-1/4"H x 1-3/4"D
• Includes clamp-on brackets that attach to ROPS bar • Speakers, headphones and
(no drilling) antenna sold separately
• Bracket mounts stereo and speaker and antenna Side by Side Mounting Kit 6989228
• Matching bracket for opposite side mounts 2nd
• Includes 3 backing plates,
speaker
2 speaker wiring harness,
• Includes wiring harness and all hardware and mounting hardware,
instructions instructions.
• Speakers, headphones, antenna sold separately
Notice: Do not connect stereos directly to the battery. Stereos feature alerts which can turn on stereo and cause the battery to drain.
6989091
9 pin Cadillac-
Hoffman Connector
Features
• 12V DC Power • Clock runs up to 30 days when vehicle battery is disconnected
• AM/FM electronic tuner (US/Euro) • Corrosion and UV-resistant faceplate
• Front and rear panel audio AUX-in for use with iPods, MP3 • 30 programmable station presets (18FM, 12AM)
players & portable CD players • Built-in job site work timer
• Listen to music your own way through Bluetooth enabled • Electronic seek up/down/volume/bass/treble/balance
stereo headphones or built in 15 watt stereo amplifier
• 12/24 hour clock
• Works with most factory installed speaker/antenna systems or
• Backlit controls with selectable amber or green illumination
our JENSEN speakers (antenna sold separately)
colors
• 7-Channel NOAA weatherband tuner
• Daylight readable display with wide viewing angle
• Weather Alert automatically switches to WB mode when
• One-touch audio mute
NOAA warning broadcast is received
• Dimensions: 5-3/16"W x 3-3/8"H x 1-7/8"D
• 2-wire connection prevents battery drain when vehicle is not
in use
Jensen Bluetooth Wireless Headphones
• Bluetooth streaming audio (A2DP)
• Hands Free Protocol (HFP)
• Range up to 32 feet
• Built-in microphone
• Rechargeable batteries and battery charger included
• Multi-link simultaneously pairs two Bluetooth enabled devices
• Adjustable padded headband
• Frequency response of 20Hz ~ 20KHz
• Auto shut-off
• Power LED
• Up to 6 hours talk time
• Up to 10 hours music playtime
Notice: Do not connect stereos directly to the battery. Stereos feature alerts which can turn on stereo and cause the battery to drain.
• NOAA 7-Channel Weather band • Aux inputs (1 Front, RCA input on Rear)
• Auto preset store • Public Announcement (PA) ready (use Jensen Microphone)
• Non-volatile memory for station presets, audio settings and configuration menu • Front panel USB (iPhone and iPod compatible)
settings
• 12/24 Hr. Time clock
6988869 Additional Features:
• Internal power storage for limited time clock support
• Suspended slot-in CD player (CD-A, CD-R, CD-RW, MP3, WMA compatible)
• Wireless (IR) remote ready
• 40-second Electronic Skip Protection
• Beep Tone confirmation (Selectable ON/OFF)
• Front panel USB (iPhone and iPod compatible)
• 5-mode preset EQ
• Weather Alert
• ROHS compliant
• S.A.M.E. (Speci ic Area Message Encoding)
• Satellite Radio Ready (SIRIUS Gen 3.0)
6988865 Additional Features: • SiriusXM ready (requires the 7411724 tuner and 7411725 antenna) (satellite
• Segmented high-visibility LCD display radio sold separately)
• 4x40W Max output power • Aux inputs (1 Front, RCA input on Rear)
• Station presets (12AM, 18FM, 18 SAT)
• Full Dot Matrix high-visibility display
• Public Announcement (PA) system compatible.
• Pre-Amp out (1)
• 4x45W Max output power
• Bluetooth Profiles Available:
- Hands Free Protocol (when the optional Jensen microphone is added)
- A2DP for streaming audio from a Bluetooth streaming device
- AVRCP for control of a Bluetooth device
Notice: Do not connect stereos directly to the battery. Stereos feature alerts which can turn on stereo and cause the battery to drain.
Notice: Do not connect stereos directly to the battery. Stereos feature alerts which can turn on stereo and cause the battery to drain.
Skid-steer Loaders
Kit contains:
1 - 7145333 Radio Bracket
1 - 6988336 Bobcat Mini Radio
M-Series Deluxe Cab 6988435 M-Series Loader Kit 2 - 6988660 4 x 6 Speakers
1 - 6988661 Antenna, 94 Inch
8 - 7162770 Plastic Screws
1 - 6987139 Install. Instructions
6988336 Jensen Mini Stereo Antenna - 6676114 or 6988064
Skid-steer, all-wheel, and track loaders Jensen Mini has in-line fuse
7025618 Jensen Mini Bluetooth Speakers - 6988063 or 6676112
Small frame loaders,
These models do not have wiring, or required space for stereo installation.
mini-track Loaders
Compact Excavators
6988336 Jensen Mini Stereo Antenna - 6676114 or 6988064 Mini Stereo Mounting Kit may be
Open canopy Models
7025618 Jensen Mini Bluetooth Speakers - 6988063 or 6676112 needed.
6988336 Jensen Mini Stereo Antenna - 6676114 or 6988064 Mini Stereo Mounting Kit may be
Enclosed cab models, no stereo slot
7025618 Jensen Mini Bluetooth Speakers - 6988063 or 6676112 needed.
6988869 DIN Stereo w/CD
Enclosed cab models with stereo slot 6988865 DIN Stereo DIN stereos can be mounted vertically.
6988867 DIN Stereo
Kit contains:
1 - 7166859 Radio Bracket
1 - 6988336 Mini Radio (Standard)
M-Series Excavators: E26, E32, E35,
6988434 Kit, Radio - Standard 4 - 7163690 Screws
E42, E45, E50, E55
1 - 7173341 Grommet
4 - 6685744 Nut Plates
1- 6987357 Install, Instructions
Kit contains:
1 - 7166859 Radio Bracket
1 - 7025618 Mini Radio (Wireless)
M-Series Excavators: E26, E32, E35,
7229098 Kit, Radio - Blue Tooth 4 - 7163690 Screws
E42, E45, E50, E55
1 - 7173341 Grommet
4 - 6685744 Nut Plates
1- 6987357 Install, Instructions
Kit contains:
M-Series Excavators without antenna 1 - 6676114 Antenna
7228595 Kit, Antenna & Speakers
& speakers 2 - 6903211 Speakers
1- 6983757 Install, Instructions
6988869 DIN Stereo w/CD
E60/E80 6988865 DIN Stereo 6989235 Radio Adapter Kit
6988867 DIN Stereo
6988869 DIN Stereo w/CD
E63/E85 6988865 DIN Stereo 7244957 Radio Adapter Kit
6988867 DIN Stereo
Compact Tractors
ROPS Mount. Kit - 6988065
6988336 Jensen Mini Stereo The stereo requires a ROPS mounting
Open ROPS models Antenna - 6676114 or 6988064
7025618 Jensen Mini Bluetooth kit to install.
Speakers - 6988063
6988869 DIN Stereo w/CD See instructions
Models with factory cab 6988865 DIN Stereo Wiring Adapter - see adapter page Cab includes speakers and antenna.
6988867 DIN Stereo Trim Piece - 6988506
Notice: Do not connect stereos directly to the battery. Stereos feature alerts which can turn on stereo and cause the battery to drain.
VersaHandler
6988869 DIN Stereo w/CD Wiring Adapter - see adapter page V519 S/N B3YH and V723 S/N B4C3
All models with stereo slot 6988865 DIN Stereo Antenna - 6676114 or 6988064 do not require the wiring adapter,
6988867 DIN Stereo Speakers - see speakers antenna or speaker.
Utility Vehicles
6988336 Jensen Mini Stereo Antenna - 6676114 or 6988064 The stereo requires a mounting or
2100, 2200, 2200S, 2300
7025618 Jensen Mini Bluetooth Speakers - 6988063 or 6676112 ROPS kit to install.
Kit contains:
1 - 6988336 Bobcat Mini Radio
2 - 6988970 6.5” Speakers
1 - 6988661 Antenna, 94 Inch
1 - 6988968 Antenna Ext. 48”
1 - 7193563 Radio Harness
6 - 6624289 Tie Strap
MY11- MY13 6989016 Bobcat UTV Kit 2 - 30H21 Clamps, 10 ct.
4 - 7196160 Screw
8 - 50D8 Nut
8 - 25E8Washer
1 - 7018018 Speaker Mount
8 - 7196213 Screw
1 - 30H84 Clamp
1 - 6989774 Install. Instructions
Kit contains:
1 - 6988336 Bobcat Mini Radio
2 - 6988970 6.5” Speakers
1 - 6988661 Antenna, 94 Inch
1 - 6988969 Antenna Ext. 96”
1 - 7193563 Radio Harness
6 - 6624289 Tie Strap
MY11- MY13 Extended Cab 6989017 Bobcat UTV Ext. Kit 2 - 30H21 Clamps, 10 ct.
4 - 7196160 Screw
8 - 50D8 Nut
8 - 25E8Washer
1 - 7018018 Speaker Mount
8 - 7196213 Screw
1 - 30H84 Clamp
1 - 6989774 Install. Instructions
6988876
24 Volt-12 Volt DC
Installation Kit for Toolcat “Work Machine” Converter
Wiring Adapters
There are now three wiring adapters that have two styles. The old
style adapter fits Jensen DIN radios that were sold prior to March
2010. The most recent discontinued radio part numbers are: 6988113,
6988112, and 6988117 (Six pack part numbers: 6988138 6988137,
and 6988240.) Please reference part numbers listed in description
below for new style radio adapters.
7175108
6988659 6988449
6988693
6988661
RE: California Electronic Waste Recycling Act of 2003 as amended: Impacted Jensen, Flexvision,
Voyager and ASA Rear Observation Monitors, CRT, LCD and Plasma Televisions
Dear Customer:
California has adopted the Electronic Waste Recycling Act of 2003 (as amended, the “Act”). The announced
purpose of the Act is to provide a comprehensive system for the reuse, recycling and disposal of covered
electronic devices. The full text of the law can be found at http://www.ciwmb.ca.gov/Electronics/RegIssues/;
and you may contact the California Department of Toxic Substances Control or Integrated Waste Management
Board for more information.
In addition to stringent design and reporting requirements, the Act requires manufacturers to provide notice
to retailers that certain of their products are covered under the Act and that a fee must be collected upon
the sale of those products (in California) after the effective date. On December 28, 2004, the Department of
Toxic Substances Control adopted emergency regulations adding additional types of devices to those already
covered by the Act: CRT televisions; Rear Observation Monitors; LCD televisions; and Plasma televisions
containing a screen greater than four inches measured diagonally (“Covered Electronic Devices”). Those
products are now subject to the Act and the effective date for collection of the fees is July 1, 2005.
ASA Specialized Applications, LLC (“ASA”) sells Rear Observation Monitors, CRT, LCD and Plasma televisions
and is therefore a manufacturer as defined in the Act. This letter serves as ASA’s notice that the televisions
listed on the attached table are Covered Electronic Devices pursuant to the Act. The attached table provides
you with a guide as to the fee placed on each of these televisions on and after July 1, 2005. While the table
represents our efforts to include all current model numbers, this fee is applicable to all retail sales of JE2043,
JE2369, JE2610, JE3269, JE17FDTV and other applicable TV or models as added.
Compliance with all applicable laws is part of your responsibility in selling and distributing ASA products.
The collected fees must be remitted to the State of California quarterly on or before the last day of the month
following each calendar quarter. As a retailer of electronic devices, you are responsible for collecting the fee
regardless of whether you received a notice from the manufacturer. Failure to collect or pay the fee could
subject you to a penalty of up to $5,000 per sale. Additional information relating to the fee and its collection
may be found at:
Please note that if you distribute ASA products to other distributors and/or retailers within the State
of California, you must pass on to them this information so that they can fulfill their obligations under
this law.
Sincerely,
2. The Warranty Duration is one (1) year from date of retail sale with the following exception: Dealer shelf life
is one (1) year. Therefore, any product returned for warranty coverage that is more than two (2) Years old
(1-Year Warranty plus 1-Year Shelf Life), as determined by the coded production date on the chassis serial
number label will be considered “Out-of-Warranty” and the claim will be denied.
3. Proof of warranty coverage is a photocopy of the original DATED RETAIL BILL OF SALE TO THE
CUSTOMER. No other form of verification is acceptable. The warranty is not transferable.
4. This warranty is solely between you (the Dealer) and ASA (the Company). There is no supplemental, or
service warranty supporting this warranty. There are no payments for either travel expenses or labor for the
removal, reinstallation, or service of the warranted product.
2. Simply stated, subject to the above exception, we will never deny your warranty claim provided it meets the
defined requirements.
2. (NEVER have your customer call us – we deal directly with you, the dealer) Call 1-800-859-3899 for a
“Return Authorization” (RA).
3. Return the defective product as explained to you by your ASA customer service agent. A replacement (see
#1 under “Warranty” above) will be sent within 5 working days.
Only contact ASA regarding: product warranty, product tech support, and ordered in error
returns. Please contact your internal Bobcat Parts Customer Service Representative for all
other issues.
There is a 15% restocking fee on returns to ASA, and the return part(s) must be in the same condition as which
it was received (unopened, in saleable condition.) If the part is returned, and does not meet the required criteria
you will not receive credit.
Return Procedure:
1. Contact ASA’s customer service to initiate the return process, 1-800-859-3899. So ASA can locate your
order, you will need to provide the PO# from your packing slip. The PO# is located on the top right hand
corner of the packing slip. The number is: your four digit (dealer) parts number, your PO#, and the seven
digit Bobcat Oracle order number.
If your return is approved, ASA will provide you with an RA# and provide the return shipping address.
2. After you have received your ASA issued RA#, and shipped your return to ASA, fill out a manual SDR with
Bobcat Parts credit. Fax your SDR to 866-365-3979. Make sure your ASA RA# is noted in the notes field.
3. When Bobcat Parts receives notification from ASA on return receipt of the stereos ordered in error, your
SDR will be processed and Bobcat Company will issue your credit minus the restocking fee. Note: The
restocking fee is 15%.
4. The return must be completed within 45 days of receipt. Do not return stereo products to Bobcat Company.
Do not contact ASA regarding your credit, your credit will be issued from Bobcat Company.
For all other issues regarding stereo shipments, please refer to the Bobcat Parts Policy and Procedure manual
for the correct procedures to follow. For stereo warranty issues please see the warranty in this guide.
Only contact ASA regarding: product warranty, product tech support, and ordered in error
returns. Please contact your internal Bobcat Parts Customer Service Representative for all
other issues.
While most North America manufactured SSL, CTL and MX now come standard with Machine IQ, existing
equipment can also take advantage of Machine IQ benefits. Install Aftermarket Machine IQ kits on current
inventory, rental fleets, certified pre-owned, and older customer machines. Machine IQ provides dealers
and customers remote visibility to Bobcat equipment location, service intervals, critical codes, operating
hours, and more.
Wireless
Part No. Country Compatible Models
Technology
US Loaders
7354101 LDR
Canada (S450 – S850, T450-T870)
US Factory Installed
7354462 LDR
Canada Unit Replacement
US M series E42, E45, E50,
7354738 MX
Canada E55, E26
US
7354513 MX R series E32, E35, E85
Canada
You don’t have to sacrifice ride comfort for added traction. Bobcat tracks have been tested and proven to not only
withstand the most challenging environments, but to also deliver a softer ride by distributing the machine’s weight over a
larger surface area. Our tracks offer the traction needed to bring out the loader’s full capabilities. Wider and thicker roller
path area is key to the tracks’ improved performance and vibration-mitigating technology − even on worn rollers.
PREMIUM
C-PATTERN
HEX
PATTERN
H-PATTERN
400+ 600+ 800+ 1,000+
HOURS HOURS HOURS HOURS
* Hour ratings listed above are based on usage in moderate working conditions.
ROCK DIRT SAND CONCRETE DEMOLITION TURF SNOW MUD SLOPED CLAY
PREMIUM
C-PATTERN
STANDARD
C-PATTERN
ZIG ZAG
PATTERN
MULTI-BAR
LUG
HEX
PATTERN
H-PATTERN
Bobcat Company Aftermarket Parts Tracks, Tires & Accessories (B-22) | 192
Bobcat Compact Loader Tracks
Bobcat Compact Loader Tracks B O B C AT. C O M
Premium C-Pattern
Exclusive to Bobcat, the premium C-pattern track Availability by Platform
offers the best durability in an all-season track.
It is one of the best and most versatile tracks 500 600 700 800 60 70
on the market and provides superior traction in
most applications. 320mm ✔ ✔ ✔ ✔ ✔
Recommended uses: 400mm ✔ ✔
• Great for all general construction work
• Excellent in dirt, mud, rock and demolition 450mm ✔ ✔ ✔ ✔
• Not recommended for snow
Hex Pattern
The hex pattern track is a versatile track that is Availability by Platform
durable on gravel and conversely, turf friendly.
This track offers a smooth and comfortable ride 500 600 700 800 60 70
with a minimal footprint on grass and lawns.
320mm ✔ ✔ ✔ ✔
Recommended uses:
• Best on turf (golf courses, landscaping) 400mm ✔ ✔
• Soft dirt or sandy applications
• Not recommended for extremely wet conditions 450mm ✔ ✔ ✔ ✔
H H-Pattern
The H-pattern track is a good multi-application Availability by Platform
track for general use on your machine. The offset
tread pattern minimizes vibration and reduces 500 600 700 800 60 70
undercarriage wear.
320mm ✔ ✔ ✔ ✔
Recommended uses:
• Good for general construction work 400mm ✔ ✔ ✔
• Good on rock, concrete, mud or sloped surfaces
• Not recommended for turf 450mm ✔ ✔ ✔ ✔
Bobcat ®, the Bobcat logo and the colors of the Bobcat machine are registered trademarks of Bobcat Company in the United States and various other countries. P013 (12/21)
©2021 Bobcat Company. All rights reserved. EP-1M-1221-80438-F
Bobcat Company Aftermarket Parts Tracks, Tires & Accessories (B-22) | 193
Compact Equipment
Rubber
Compact Tracks
Equipment
Rubber Tracks
Bobcat Compact Loader Tracks
BOBCAT COMPACT
LOADER TRACKS
Maximize your compact track loader
performance with Bobcat Rubber Tracks.
The internal continuous cables and imbeds are made of steel for ultimate
performance and lifespan, even in demanding conditions.
These tracks withstand tough environments, but their design will also provide a smooth ride by distributing weight over
a larger surface area without sacrificing your loader’s capabilities.
Bobcat Parts offers multiple tread patterns to accommodate various applications and optimize your compact track loader’s
performance for the jobs you do.
Multiple tread patterns are available for select compact track loaders. Your Bobcat dealer can help you select the right track
for your application.
Bobcat Company Aftermarket Parts Tracks, Tires & Accessories (B-22) | 195
Bobcat Compact Loader Tracks
PART PART
MODELS SIZE LUG HEIGHT PATTERN MODELS SIZE LUG HEIGHT PATTERN
NO. NO.
T110 250 x 72 x 52 6688373 0.89 in. (22.5 mm) A 400 x 86 x 52 7433186 0.71 in. (18.0 mm) E
T200, T630,
300 x 84 x 46 6682177 0.98 in. (25.0 mm) A 6989159 1.18 in. (30.0 mm) D
T650, 864 450 x 84 x 53
T140, T450 7024982 0.95 in. (24.0 mm) C 7028227 1.50 in. (38.0 mm) G
320 x 84 x 46
7028232 0.79 in. (20.0 mm) G T76 450 x 84 x 54 7396440 1.50 in. (38.0 mm) G
T180, T190, T250, T300, T320 6989157 1.18 in. (30.0 mm) D
320 x 84 x 50 7028223 0.79 in. (20.0 mm) G 450 x 84 x 56
T550, T590, T595 T740, T750, T770 7028228 1.50 in. (38.0 mm) G
T180, T190 320 x 84 x 50 6989140 0.95 in. (24.0 mm) D
450 x 84 x 59 7028229 1.50 in. (38.0 mm) G
T62, T64, T66 320 x 84 x 51 7408149 0.79 in. (20.0 mm) G
T870 6989042 1.18 in. (30.0 mm) C
7261331 1.18 in. (30.0 mm) C 450 x 84 x 60
T200, T630, 6989158 1.18 in. (30.0 mm) D
320 x 84 x 53
T650, 864 7028226 0.79 in. (20.0 mm) G
6680150 1.02 in. (26.0 mm) A
T76 320 x 84 x 54 7396439 0.79 in. (20.0 mm) G
7374159 0.98 in. (25.0 mm) B
T140, T450 320 x 86 x 45 7327929 0.71 in. (18.0 mm) E T200, T630,
450 x 86 x 52 7320104 1.18 in. (30.0 mm) C
T650, 864
6680161 1.08 in. (27.5 mm) A
7327932 0.71 in. (18.0 mm) E
7374160 1.06 in. (27.0 mm) B
7316761 1.02 in. (26.0 mm) F
T180, T190,
320 x 86 x 49 7320103 0.79 in. (20.0 mm) C
T550, T590, T595 7301305 1.02 in. (26.0 mm) A
7327930 0.71 in. (18.0 mm) E
7394638 0.98 in. (25.0 mm) B
7316758 1.08 in. (27.5 mm) F
7359650 1.18 in. (30.0 mm) C
7324233 1.08 in. (27.5 mm) A T76 450 x 86 x 53
7396441 0.98 in. (25.0 mm) D
7407925 1.06 in. (27.0 mm) B
7396445 0.71 in. (18.0 mm) E
T62, T64, T66 320 x 86 x 50 7394912 0.79 in. (20.0 mm) C
7396438 1.02 in. (26.0 mm) F
7408152 0.71 in. (18.0 mm) E
6678749 1.02 in. (26.0 mm) A
7408138 1.08 in. (27.5 mm) F
7374158 0.98 in. (25.0 mm) B
T250, T300,
6680149 1.08 in. (27.5 mm) A
T320, T740, 450 x 86 x 55 7320105 1.18 in. (30.0 mm) C
T200, T630, 7374156 1.06 in. (27.0 mm) B T750, T770
320 x 86 x 52 7327933 0.71 in. (18.0 mm) E
T650, 864 7327931 0.71 in. (18.0 mm) E
7316763 1.06 in. (27.0 mm) F
7316760 1.08 in. (27.5 mm) F
7277043 1.02 in. (26.0 mm) A
7319946 1.08 in. (27.5 mm) A
450 x 86 x 58 7374157 0.98 in. (25.0 mm) B
7394639 1.06 in. (27.0 mm) B
7327934 0.71 in. (18.0 mm) E
T76 320 x 86 x 53 7396442 0.79 in. (20.0 mm) C T870
7266334 1.02 in. (26.0 mm) A
7396444 0.71 in. (18.0 mm) E
450 x 86 x 60 7374153 1.06 in. (27.0 mm) B
7396437 1.08 in. (27.5 mm) F
7329954 0.71 in. (18.0 mm) E
T250, T300, 6678748 1.08 in. (27.5 mm) A
T320, T740, 320 x 86 x 55
T750, T770 7316762 1.08 in. (27.5 mm) F
7030194 1.18 in. (30.0 mm) C
T180, T190,
400 x 84 x 50 7305148 1.18 in. (30.0 mm) D
T550, T590, T595
7028224 0.79 in. (20.0 mm) G
T62, T64, T66 400 x 84 x 51 7408150 0.79 in. (20.0 mm) G
T200, T630,
400 x 84 x 53 7359432 1.18 in. (30.0 mm) C
T650, 864
6685650 1.08 in. (27.5 mm) A
T180, T190, 7374154 0.98 in. (25.0 mm) B
400 x 86 x 49
T550, T590, T595 7433185 0.71 in (18.0 mm) E
7316759 1.08 in. (27.5 mm) F
7324236 1.02 in. (26.0 mm) A
7407926 0.98 in. (25.0 mm) B
7408151 0.79 in. (20.0 mm) C
T62, T64, T66 400 x 86 x 50
7417305 0.79 in. (20.0 mm) D
7408153 0.71 in. (18.0 mm) E
7408148 1.06 in. (27.0 mm) F
7396443 0.79 in. (20.0 mm) C
T76 400 x 86 x 53
7396446 0.71 in. (18.0 mm) E
3
Bobcat Company Aftermarket Parts Tracks, Tires & Accessories (B-22) | 196
Bobcat Compact Excavator Tracks
BOBCAT COMPACT
BOBCAT COMPACT
EXCAVATOR TRACKS
EXCAVATOR TRACKS
Each replacement rubber track offered
Each
by replacement
Bobcat Parts is rubberdesigned track offered
to meet
by Bobcat
the operational Partsand is designed
performance to meet
the operational
requirements ofand performance
Bobcat Compact Excavators.
requirements
Made to deliver long lifeof Bobcat
in extreme Compact
working conditions, Excavators.
Bobcat compact excavator
tracks also provide a smooth ride. They distribute the machine’s weight over a larger
Made toarea
surface deliver long life incomfort
to maximize extremewithout
working conditions,
sacrificing Bobcat
your compact
excavator’s excavator
capabilities.
tracks also provide a smooth ride. They distribute the machine’s weight over a larger
While
surfacecompact excavator comfort
area to maximize tracks are commonly
without used at
sacrificing lower
your speeds, and
excavator’s for less
capabilities.
aggressive applications, than a compact track loader, they too can face the same
While compact
working excavator
conditions as othertracks
trackare commonly used at lower speeds, and for less
machines.
aggressive applications, than a compact track loader, they too can face the same
Multiple tread patterns
working conditions are available
as other for select compact excavators.
track machines.
Your Bobcat dealer can help you select the right track for your application.
Multiple tread patterns are available for select compact excavators.
Your Bobcat dealer can help you select the right track for your application.
A B C D
A B C D
E F G H
E F G H
I J K
I J K
4 | 197
Bobcat Company Aftermarket Parts Tracks, Tires & Accessories (B-22)
Bobcat Compact Excavator Tracks
PART PART
MODELS SIZE LUG HEIGHT PATTERN MODELS SIZE LUG HEIGHT PATTERN
NO. NO.
418, E08, 6988848 0.43 in. (11.0 mm) H E60, E62, E63 400 x 72.5 x 76 7306876 1.00 in. (26.0 mm) A
180 x 39 x 72
E10, E10Z 7153420 0.67 in. (17.0 mm) F E50Z, E55, E60 400 x 73 x 74 7314068 0.98 in. (25.0 mm) A
318 180 x 72 x 38 7261330 0.43 in. (11.0 mm) H 337, 341, 435,
E45, E50, E55, 400 x 74 x 72.5 7363999 1.18 in. (30.0 mm) G
418, E08, E10, E60
180 x 72 x 39 7255246 0.67 in. (17.0 mm) I
E10E, E10Z
6692960 0.98 in. (25.0 mm) A
320, 321, 322,
337, 341, 435,
323, 324, E16, 230 x 33 x 96 6673949 0.98 in. (25.0 mm) D 400 x 74 x 73 7024957 0.98 in. (25.0 mm) A
E45, E50, E55
E17, E17Z, E19
6678826 0.98 in. (25.0 mm) F
320, 322, 323,
230 x 48 x 66 6988832 0.67 in. (17.0 mm) A E60 400 x 76 x 72.5 6989040 0.98 in. (25.0 mm) C
E17, E17Z, E19
E17, E17z, E19 230 x 48 x 66 7259426 0.86 in. (21.8 mm) D 6989041 0.98 in. (25.0 mm) A
E80, E85 450 x 81 x 76
7258912 0.98 in. (25.0 mm) D 7306878 1.40 in. (35.0 mm) A
E20, E20Z 230 x 48 x 72
7259427 0.86 in. (21.8 mm) D E85 450 x 81 x 76 7304043 1.10 in. (28.0 mm) A
220, 320, 322 230 x 72 x 45 6988829 0.39 in. (10.0 mm) H E88 450 x 83.5 x 74 7356768 1.18 in. (30.0 mm) A
320, 322, 323, 442 450 x 86 x 71 6988330 0.83 in. (21.0 mm) A
230 x 96 x 33 7364047 1.18 in. (30.0 mm) G
E17, E17Z, E19
220, 320, 322 250 x 45 x 72 6652044 0.98 in (25.0 mm) E
231, 325, 328,
329, 331, 334,
425, 428, E26, 300 x 52.5 x 80 7255666 0.93 in. (23.5 mm) A
E27, E27Z, E32,
E32i, E34
6988830 0.83 in. (21.0 mm) A
225, 325, 328 300 x 74 x 52.5
7363987 1.18 in. (30.0 mm) G
231, 325, 328,
329, 331, 334,
425, 428, E26, 300 x 80 x 52.5 7363997 0.87 in. (22.1 mm) G
E27, E27Z, E32,
E32i, E34
231, 325, 329,
331, 334, 425,
428, E26, E27, 300 x 80 x 52.5 6988831 0.83 in. (21.0 mm) A
E27Z, E32, E32i,
E34
231, 325, 328,
331, 334, E26,
300 x 80 x 52.5 7165834 0.93 in. (23.5 mm) J
E27, E27Z, E32,
E32i, E34
231, 325, 328,
329, 331, 334,
425, 428, E32i, 300 x 80 x 52.5 7274743 0.98 in. (25.0 mm) A
E26, E27, E27Z,
E32, E32i, E34
100, E35, E35Z,
300 x 84 x 52.5 6988844 0.83 in. (21.0 mm) A
E35i, E37
7255667 0.93 in. (23.5 mm) A
E35, E35Z, E5i,
300 x 84 x 52.5 7274253 0.98 in. (25.0 mm) A
E37
7363998 1.18 in. (30.0 mm) G
225, 325, 328 320 x 74 x 52.5 6672773 0.98 in. (25.0 mm) J
231, 329, 331,
320 x 80 x 52.5 6672774 0.98 in. (25.0 mm) J
334, 425, 428
6687124 0.98 in. (25.0 mm) K
335, 430 320 x 88 x 55
6988841 0.79 in. (20.0 mm) K
E42, E50Z 350 x 55 x 88 7276419 0.82 in. (21.0 mm) A
350 x 88 x 54.5 6988847 0.63 in. (16 mm) A
E42
350 x 88 x 55 6692959 0.91 in. (23 mm) C
335, 430, E42 350 x 88 x 55 6693201 0.98 in. (25.0 mm) F
5
Bobcat Company Aftermarket Parts Tracks, Tires & Accessories (B-22) | 198
Bobcat Mini Loader Tracks
BOBCAT MINI
LOADER TRACKS
Customize your mini track loader
performance with replacement rubber
tracks from Bobcat Parts.
Bobcat rubber tracks for mini track loaders are made from the same durable combination of natural and synthetic rubbers
as our compact track loaders. Embedded steel adds strength, and continuous steel cables provide the best performance and
ensure a long lifespan in tough working conditions. The tracks are designed to distribute the mini track loader’s weight over
a wide surface area, enhancing the ride quality without sacrificing pushing power or traction. Multiple tread patterns give you
the opportunity to match traction and surface protection to all kinds of applications and tasks.
Multiple tread patterns are available for select mini track loaders.
Your Bobcat dealer can help you select the right track for your application.
A B D
E F G
Bobcat Company Aftermarket Parts Tracks, Tires & Accessories (B-22) | 199
Bobcat Mini Loader Tracks
PART TREAD
MODELS SIZE LUG HEIGHT
NO. PATTERN
6988846 0.87 in. (22.0 mm) B
MT50, MT52 180 x 72 x 39
6678661 0.71 in. (18.0 mm) G
TRACK STRUCTURE
Each track is structurally designed to match the needs of your Bobcat equipment.
TRACK SIZE
Width (mm) x Pitch (mm) x Link (Total #)
Pitch Length
12 3
Lug Height Number of Links
Bobcat Company Aftermarket Parts Tracks, Tires & Accessories (B-22) | 200
Bobcat Loader Rubber Tracks
Bobcat Company Aftermarket Parts Tracks, Tires & Accessories (C-13) | 201
Bobcat Loader Rubber Tracks
System of Strength
• Continuous and uniformly-wound cables significantly increase the
flexible force of the tracks. Using the exact same length of cable
eliminates the tighter loops that can gouge and tear the rubber track.
Bobcat Company Aftermarket Parts Tracks, Tires & Accessories (K-19) | 202
M-Series Excavator Steel Track Bolt-on Rubber Pads
Bobcat Company Aftermarket Parts Tracks, Tires & Accessories (C-13) | 203
Over-the-Tire Tracks (OTTs)
Diamond OTTs
These tracks are designed for serious traction. The
diamond pattern creates more traction than normal
smooth bar tracks, maximizing your machine’s power.
The track design allows excellent cleanout for snowy
and icy conditions or mud and clay. These tracks
help distribute the weight of your machine over a
wider area and significantly reduce bouncing.
Rubber OTTs
Rubber over-the-tire tracks are extremely versatile
and allow you to maximize your traction without
damaging surfaces like pavement or grass. They
also provide excellent flotation and traction in muddy
or slippery conditions. The high-wear rubber pads
are replaceable and feature a layer of steel inside to
keep your tires safe from punctures.
Wheel Spacers
Over-the-tire tracks need a minimum of 3 inches of clearance
C
between the tire sidewalls and the machine to ensure proper
operation during tight turns. Wheel spacers are available to B
increase clearance if needed. Some wheels have reversible
offset rims that can be turned around for increased clearance,
eliminating the need for spacers.
Replacement Parts
7281303 Installation kit is
Part Description
included with all tracks.
7281286 10" Rubber Replacement Pads with Nuts (50 pcs)
7303900 10" Rubber Replacement Pads with Nuts Kit (4 pcs) Includes:
7281287 12" Rubber Replacement Pads with Nuts (56 pcs) • Track tightener tool
7303901 12" Rubber Replacement Pads with Nuts Kit (4 pcs) • Extra nuts and bolts
7281293 Carriage Bolt Set with Nuts & Lock Washers (240 pcs)
• Allen wrench
7303898 Carriage Bolt Set with Nuts & Lock Washers (8 pcs)
• 1/2" ratchet with
7281294 Link Replacement Set (112 pcs)
7303899 Link Replacement Set (4 pcs)
required sockets
7325076 Replacement 9/16" Studs with Nuts for Red Spacer (8 pcs)
7325075 Replacement 9/16" Studs with Nuts for Black Spacer (6 pcs)
7325077 Replacement 5/8" Studs with Nuts for Grey/Green Spacer (8 pcs)
7325078 Universal C-Clamp (2 pcs)
7325079 Threaded V-Hook Rod ½" with 2 Nuts
7281303 Installation Kit
MUD AG ROCK CLAY SLOPED TURF DIRT RECYCLING SAND SNOW DEMO CONCRETE
STANDARD-DUTY
HEAVY-DUTY
SEVERE-DUTY
SEVERE-DUTY
ALL-TERRAIN
SUPER-FLOAT
SNOW
SOLID (L/R)
SOLID SEVERE-DUTY
NON-DIRECTIONAL
SOLID SUPER-SMOOTH
SOLID
SEVERE-DUTY SOLID
STANDARD-DUTY HEAVY-DUTY SEVERE-DUTY TURF & SAND SUPER-FLOAT SNOW SOLID (L/R) NON-
ALL-TERRAIN SUPER-SMOOTH
DIRECTIONAL
10 x 16.5 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
12 x 16.5 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
15.5 x 16.5 ✔ ✔ ✔ ✔
14 x 17.5 ✔ ✔ ✔ ✔ ✔ ✔ ✔
Bobcat Company Aftermarket Parts Tracks, Tires & Accessories (L-21) | 206
Bobcat Compact Loader Tires
Bobcat Compact Loader Tires B O B C AT. C O M
Bobcat Company Aftermarket Parts Tracks, Tires & Accessories (B-22) | 209
Compact Loader Tires
Snow Tires
“Tough, versatile and agile” perfectly describes Bobcat snow tires. The narrow base provides the power
and traction you require in harsh winter conditions without the need for studs, making the Bobcat snow
tire the ultimate tire on ice and snow.
• Narrow base for extra stability and traction • Special cold weather compound that remains
• Unique tread designed for increased power flexible in colder temperatures
and grip on snow and ice • Load rating designed for your Bobcat equipment
Bobcat Company Aftermarket Parts Tracks, Tires & Accessories (B-22) | 210
Compact Loader Tires
COMPACT
COMPACT
LOADER
LOADER
TIRES
TIRES
TIRE TIRE MODEL
MODEL TIRE SIZE
TIRE SIZE PART PART
NO. NO. OUTSIDE
OUTSIDE
DIAMETER
DIAMETER TIRE WIDTH
TIRE WIDTH
Skid-Steer
Skid-Steer 5.7 x 125.7 x 12 7343581
7343581 23.0 in.23.0
(584in.mm)
(584 mm) 5.7 in. 5.7
(145in.mm)
(145 mm)
Skid-Steer
Skid-Steer 8.5 x 128.5 x 12 6652525
6652525 23.0 in.23.0
(584in.mm)
(584 mm) 8.5 in. 8.5
(216in.mm)
(216 mm)
Standard
Standard
Skid-Steer
Skid-Steer 10.5 x 10.5
15 x 15 6680056
6680056 27.0 in.27.0
(686in.mm)
(686 mm) 10.5 in.10.5
(267in.mm)
(267 mm)
Skid-Steer
Skid-Steer 10 x 16.5
10 x 16.5 7311014
7311014 31.0 in.31.0
(787in.mm)
(787 mm) 10.0 in.10.0
(254in.mm)
(254 mm)
Skid-Steer
Skid-Steer 5.7 x 125.7 x 12 7305854
7305854 23.0 in.23.0
(584in.mm)
(584 mm) 5.7 in. 5.7
(145in.mm)
(145 mm)
Skid-Steer
Skid-Steer 8.5 x 128.5 x 12 7343582
7343582 23.0 in.23.0
(584in.mm)
(584 mm) 8.5 in. 8.5
(216in.mm)
(216 mm)
Skid-Steer
Skid-Steer 8.5 x 15
8.5 x 15 6987702
6987702 27.0 in.27.0
(686in.mm)
(686 mm) 8.5 in. 8.5
(216in.mm)
(216 mm)
Skid-Steer
Skid-Steer 8.5 x 15
8.5 x 15 6667890
6667890 27.0 in.27.0
(686in.mm)
(686 mm) 8.5 in. 8.5
(216in.mm)
(216 mm)
Heavy Heavy Skid-Steer
Skid-Steer 10 x 16.5
10 x 16.5 7322705
7322705 31.0 in.31.0
(787in.mm)
(787 mm) 10.0 in.10.0
(254in.mm)
(254 mm)
Skid-Steer
Skid-Steer 10 x 16.5
10 x 16.5 6987705
6987705 31.0 in.31.0
(787in.mm)
(787 mm) 10.0 in.10.0
(254in.mm)
(254 mm)
Skid-Steer
Skid-Steer
or or
12 x 16.5
12 x 16.5 7101736
7101736 33.0 in.33.0
(838in.mm)
(838 mm) 12.0 in.12.0
(305in.mm)
(305 mm)
All-Wheel
All-Wheel
Steer Steer
Skid-Steer
Skid-Steer 14 x 17.5
14 x 17.5 7333095
7333095 36.0 in.36.0
(914in.mm)
(914 mm) 14.0 in.14.0
(356in.mm)
(356 mm)
Skid-Steer
Skid-Steer 10 x 16.5
10 x 16.5 6730106
6730106 31.0 in.31.0
(787in.mm)
(787 mm) 10.0 in.10.0
(254in.mm)
(254 mm)
Skid-Steer
Skid-Steer 12 x 16.5
12 x 16.5 6730108
6730108 33.0 in.33.0
(838in.mm)
(838 mm) 12.0 in.12.0
(305in.mm)
(305 mm)
SevereSevere
Skid-Steer
Skid-Steer
or or
14 x 16.5
14 x 16.5 7139189
7139189 36.0 in.36.0
(914in.mm)
(914 mm) 14.0 in.14.0
(356in.mm)
(356 mm)
All-Wheel
All-Wheel
Steer Steer
Skid-Steer
Skid-Steer 10 x 16.5
10 x 16.5 7305712
7305712 31.0 in.31.0
(787in.mm)
(787 mm) 10.0 in.10.0
(254in.mm)
(254 mm)
Skid-Steer
Skid-Steer 10 x 16.5
10 x 16.5 7357163
7357163 30.5 in.30.5
(775in.mm)
(775 mm) 10.7 in.10.7
(272in.mm)
(272 mm)
Severe-Duty
Severe-Duty
Skid-Steer
Skid-Steer 12 x 16.5
12 x 16.5 7357164
7357164 33.0 in.33.0
(838in.mm)
(838 mm) 12.0 in.12.0
(305in.mm)
(305 mm)
All-Terrain
All-Terrain
Skid-Steer
Skid-Steer 12 x 16.5
12 x 16.5 7305716
7305716 33.0 in.33.0
(838in.mm)
(838 mm) 12.0 in.12.0
(305in.mm)
(305 mm)
Skid-Steer
Skid-Steer 14 x 17.5
14 x 17.5 7305720
7305720 36.0 in.36.0
(914in.mm)
(914 mm) 14.0 in.14.0
(356in.mm)
(356 mm)
Skid-Steer
Skid-Steer 8.5 x 128.5 x 12 7109709
7109709 23.0 in.23.0
(584in.mm)
(584 mm) 8.5 in. 8.5
(216in.mm)
(216 mm)
Turf Turf
Skid-Steer
Skid-Steer 15.5 x 16.5
15.5 x 16.5 6678044
6678044 33.0 in.33.0
(838in.mm)
(838 mm) 15.5 in.15.5
(394in.mm)
(394 mm)
Skid-Steer
Skid-Steer 12 x 16.5
12 x 16.5 7211382
7211382 31.0 in.31.0
(787in.mm)
(787 mm) 12.0 in.12.0
(305in.mm)
(305 mm)
Super-Float
Super-Float
Skid-Steer
Skid-Steer 15.5 x 16.5
15.5 x 16.5 6730109
6730109 33.0 in.33.0
(838in.mm)
(838 mm) 15.5 in.15.5
(394in.mm)
(394 mm)
Skid-Steer
Skid-Steer 7.5 x 167.5 x 16 7386752
7386752 32.2 in.32.2
(818in.mm)
(818 mm) 8.7 in. 8.7
(221in.mm)
(221 mm)
Snow Snow Skid-Steer
Skid-Steer 7.5 x 167.5 x 16 7394702*
7394702* 32.2 in.32.2
(818in.mm)
(818 mm) 8.7 in. 8.7
(221in.mm)
(221 mm)
Skid-Steer
Skid-Steer 7.5 x 167.5 x 16 7389350*
7389350* 32.2 in.32.2
(818in.mm)
(818 mm) 8.7 in. 8.7
(221in.mm)
(221 mm)
* Indicate
* Indicate
tire/rim assembly
tire/rim assembly
part number.
part number.
Please see
Please
yoursee
local
your
Bobcat
localdealer
Bobcatfordealer
your tire
for your
and rim
tire replacement
and rim replacement
parts. parts.
4 4
Bobcat Company Aftermarket Parts Tracks, Tires & Accessories (B-22) | 211
Compact Loader Tires
RIM DIAMETER
RIM DIAMETER PLY RATING
PLY RATING MAX.MAX.
LOADLOAD TREAD
TREAD DEPTH
DEPTH TIRE WEIGHT
TIRE WEIGHT
12.0 in.12.0 in.mm)
(305 mm) 4 1450 lb.psi
@ 60 psi 17/32
(12in. (12 mm) 17kg)
lb. (8 kg)
(305 4 1450 lb. @ 60 17/32 in. mm) 17 lb. (8
12.0 in. (305 mm) 4 1470 lb. @ 35 psi 35 psi
1470 lb. @ 14/32 in. (11 mm) 26 lb. (12 kg)(12 kg)
26 lb.
12.0 in. (305 mm) 4 14/32 in. (11 mm)
15.0 in.15.0 in.mm)
(381 mm) 6 2610 lb.psi
@ 45 psi 17/32
(14in. (14 mm) 33 lb.
(381 6 2610 lb. @ 45 17/32 in. mm) 33 lb. (15 kg)(15 kg)
16.5 in. (419 mm) 8 4145 lb. @ 55 psi 55 psi
4145 lb. @ 18/32 in. (14 mm) 45 lb. (20 kg)(20 kg)
45 lb.
16.5 in. (419 mm) 8 18/32 in. (14 mm)
12.0 in.12.0 in.mm)
(305 mm) 4 1450 lb.psi
@ 60 psi 19/32 19/32
in. (15in. (15 mm) 21 lb.kg)
(9.5 kg)
(305 4 1450 lb. @ 60 mm) 21 lb. (9.5
12.0 in. (305 mm) 6 1820 lb. @ 50 psi 50 psi
1820 lb. @ 18/32 in. (14 mm) 25 lb. (11 kg)(11 kg)
25 lb.
12.0 in. (305 mm) 6 18/32 in. (14 mm)
15.0 in.15.0 in.mm)
(381 mm) 6 3924 lb.psi
@ 45 psi 33/32 33/32
in. (26in. (26 mm) 38 lb.
(381 6 3924 lb. @ 45 mm) 38 lb. (17 kg)(17 kg)
15.0 in. (381 mm) 8 2890 lb. @ 60 psi 15/32 in. (12 mm) 35 lb. (16 kg)(16 kg)
35 lb.
15.0 in. (381 mm) 8 2890 lb. @ 60 psi 15/32 in. (12 mm)
16.5 in.16.5
(419in.mm)
(419 mm) 10 3930 lb.psi
@ 55 psi 20/32 20/32
in. (16in. (16 mm) 45 lb.
10 3930 lb. @ 55 mm) 45 lb. (20 kg)(20 kg)
16.5 in. (419 mm) 10 4718 lb. @ 76 psi 76 psi
4718 lb. @ 33/32 in. (26 mm) mm)
33/32 in. (26 61 lb. (28 kg)(28 kg)
61 lb.
16.5 in. (419 mm) 10
16.5 in.16.5
(419in.mm)
(419 mm) 12 5355 lb.psi
@ 60 psi 22/32 22/32
in. (17in. (17 mm) 81 lb.
12 5355 lb. @ 60 mm) 81 lb. (37 kg)(37 kg)
16.5 in.16.5
(419in.mm)
(419 mm) 10 4700 lb.psi
@ 75 psi 39/32 39/32
in. (29in. (29 mm) 74 lb.
10 4700 lb. @ 75 mm) 74 lb. (33 kg)(33 kg)
16.5 in. (419 mm) 10 4710 lb. @ 75 psi 75 psi
4710 lb. @ 37/32 in. (34 mm) mm)
37/32 in. (34 74 lb. (33 kg)(33 kg)
74 lb.
16.5 in. (419 mm) 10
16.5 in.16.5
(419in.mm)
(419 mm) 12 6320 lb.psi
@ 80 psi 37/32
(29in. (29 mm) 93 lb.
12 6320 lb. @ 80 37/32 in. mm) 93 lb. (42 kg)(42 kg)
16.5 in. (419 mm) 12 6300 lb. @ 80 psi 43/32 in. (34 mm) 103 lb. (47lb.
103
16.5 in. (419 mm) 12 6300 lb. @ 80 psi 43/32 in. (34 mm) kg)(47 kg)
17.5 in.17.5 in.mm)
(445 mm) 14 8550 lb.psi
@ 80 psi 43/32 43/32
in. (34in. (34 mm)
(445 14 8550 lb. @ 80 mm) 146 lb.146
(66lb.
kg)(66 kg)
12.0 in. (305 mm) 6 1440 lb. @ 34 psi 34 psi
1440 lb. @ 18/32 in. (14 mm) 19 lb. (9 kg) (9 kg)
19 lb.
12.0 in. (305 mm) 6 18/32 in. (14 mm)
16.5 in.16.5
(419in.mm)
(419 mm) 10 4730 lb.psi
@ 32 psi 18/32 18/32
in. (14in. (14 mm) 83 lb.
10 4730 lb. @ 32 mm) 83 lb. (38 kg)(38 kg)
16.5 in. (419 mm) 10 4460 lb. @ 55 psi 19/32 in. (15 mm) mm)
19/32 in. (15 61 lb. (28 kg)(28 kg)
61 lb.
16.5 in. (419 mm) 10 4460 lb. @ 55 psi
16.5 in.16.5
(419in.mm)
(419 mm) 12 4990 lb.psi
@ 35 psi 26/32 26/32
in. (21in. (21 mm) 94 lb.
12 4990 lb. @ 35 mm) 94 lb. (43 kg)(43 kg)
16.0 in. (406 mm) mm)
16.0 in. (406 12 3195 lb. @ 87 psi 87 psi
3195 lb. @ 18/32 in. (14 mm) mm)
18/32 in. (14 49 lb. (22 kg)(22 kg)
49 lb.
12
16.0 in.16.0 in.mm)
(406 mm) 12 3195 lb.psi
@ 87 psi 18/32 18/32
in. (14in. (14 mm) 49 lb.
(406 12 3195 lb. @ 87 mm) 49 lb. (22 kg)(22 kg)
16.0 in. (406 mm) 12 3195 lb. @ 87 psi 18/32 in. (14 mm) 49 lb. (22 kg)(22 kg)
49 lb.
16.0 in. (406 mm) 12 3195 lb. @ 87 psi 18/32 in. (14 mm)
5 5
Bobcat Company Aftermarket Parts Tracks, Tires & Accessories (B-22) | 212
Compact Loader Tires
COMPACT LOADER TIRES
PNEUMATIC OUTSIDE
TIRE MODEL PART NO. BASE RIM COLOR BOLT CIRCLE TIRE WIDTH
EQUIVALENT DIAMETER
Skid-Steer Loader 5.7 x 12 7277213 ND Orange 4.5 in. (114 mm) 23.0 in. (585 mm) 5.7 in. (145 mm)
Skid-Steer Loader 5.7 x 12 7365906 Right Orange 4.5 in. (114 mm) 21.7 in. (551 mm) 5.3 in. (135 mm)
Skid-Steer Loader 5.7 x 12 7365907 Left Orange 4.5 in. (114 mm) 21.7 in. (551 mm) 5.3 in. (135 mm)
Skid-Steer Loader 5.7 x 12 7365903 Right Gray 4.5 in. (114 mm) 21.7 in. (551 mm) 5.3 in. (135 mm)
Skid-Steer Loader 5.7 x 12 7365904 Left Gray 4.5 in. (114 mm) 21.7 in. (551 mm) 5.3 in. (135 mm)
Skid-Steer Loader 8.5 x 12 / 8.5 x 15 7023561 ND Orange 4.5 in. (114 mm) 23.0 in. (585 mm) 8.0 in. (200 mm)
Skid-Steer Loader 8.5 x 15 7023562 Left Orange 6.0 in. (150 mm) 27.0 in. (685 mm) 8.0 in. (200 mm)
Skid-Steer Loader 8.5 x 15 7023563 Right Orange 6.0 in. (150 mm) 27.0 in. (685 mm) 8.0 in. (200 mm)
Skid-Steer Loader 10 x 16.5 7295725 Left Orange 8.0 in. (203 mm) 30.0 in. (762 mm) 10.0 in. (250 mm)
Skid-Steer Loader 10 x 16.5 7295726 Right Orange 8.0 in. (203 mm) 30.0 in. (762 mm) 10.0 in. (250 mm)
Skid-Steer Loader 10 x 16.5 7246212 Left Orange 8.0 in. (203 mm) 31.0 in. (787 mm) 9.3 in. (237 mm)
Skid-Steer Loader 10 x 16.5 7246213 Right Orange 8.0 in. (203 mm) 31.0 in. (787 mm) 9.3 in. (237 mm)
Skid-Steer Loader 10 x 16.5 7296992 Left Gray 8.0 in. (203 mm) 31.0 in. (787 mm) 9.3 in. (237 mm)
Solid Flex
Skid-Steer Loader 10 x 16.5 7296993 Right Gray 8.0 in. (203 mm) 31.0 in. (787 mm) 9.3 in. (237 mm)
Skid-Steer Loader 12 x 16.5 7246214 Left Orange 8.0 in. (203 mm) 33.0 in. (838 mm) 11.3 in. (287 mm)
Skid-Steer Loader 12 x 16.5 7246215 Right Orange 8.0 in. (203 mm) 33.0 in. (838 mm) 11.3 in. (287 mm)
Skid-Steer Loader 12 x 16.5 7296998 Left Gray 8.0 in. (203 mm) 33.0 in. (838 mm) 11.3 in. (287 mm)
Skid-Steer Loader 12 x 16.5 7296999 Right Gray 8.0 in. (203 mm) 33.0 in. (838 mm) 11.3 in. (287 mm)
All-Wheel Loader 12 x 16.5 7312251 Left Orange 10.75 in. (270 mm) 33.0 in. (838 mm) 11.3 in. (287 mm)
All-Wheel Loader 12 x 16.5 7312252 Right Orange 10.75 in. (270 mm) 33.0 in. (838 mm) 11.3 in. (287 mm)
Skid-Steer Loader 12 x 16.5 7296996 Left Gray 10.75 in. (270 mm) 33.0 in. (838 mm) 11.3 in. (287 mm)
Skid-Steer Loader 12 x 16.5 7296997 Right Gray 10.75 in. (270 mm) 33.0 in. (838 mm) 11.3 in. (287 mm)
Skid-Steer Loader 14 x 17.5 7312253 Left Orange 10.75 in. (270 mm) 36.0 in. (914 mm) 12.6 in. (320 mm)
Skid-Steer Loader 14 x 17.5 7312254 Right Orange 10.75 in. (270 mm) 36.0 in. (914 mm) 12.6 in. (320 mm)
Skid-Steer Loader 14 x 17.5 7297000 Left Gray 10.75 in. (270 mm) 36.0 in. (914 mm) 12.6 in. (320 mm)
Skid-Steer Loader 14 x 17.5 7297001 Right Gray 10.75 in. (270 mm) 36.0 in. (914 mm) 12.6 in. (320 mm)
Skid-Steer Loader 10 x 16.5 6988512 Left Orange 8.0 in. (203 mm) 30.0 in. (762 mm) 10.0 in. (250 mm)
Skid-Steer Loader 10 x 16.5 6988513 Right Orange 8.0 in. (203 mm) 30.0 in. (762 mm) 10.0 in. (250 mm)
Skid-Steer Loader 10 x 16.5 7295717 Left Orange 8.0 in. (203 mm) 31.0 in. (787 mm) 9.0 in. (232 mm)
Skid-Steer Loader 10 x 16.5 7295718 Right Orange 8.0 in. (203 mm) 31.0 in. (787 mm) 9.0 in. (232 mm)
Skid-Steer Loader 12 x 16.5 6988515 Left Orange 8.0 in. (203 mm) 33.0 in. (838 mm) 12.0 in. (300 mm)
Solid Flex Dirt
Skid-Steer Loader 12 x 16.5 6988516 Right Orange 8.0 in. (203 mm) 33.0 in. (838 mm) 12.0 in. (300 mm)
Skid-Steer Loader 12 x 16.5 7024823 Left Orange 10.75 in. (270 mm) 33.0 in. (838 mm) 12.0 in. (300 mm)
Skid-Steer Loader 12 x 16.5 7024824 Right Orange 10.75 in. (270 mm) 33.0 in. (838 mm) 12.0 in. (300 mm)
Skid-Steer Loader 14 x 17.5 7024853 Left Orange 10.75 in. (270 mm) 37.0 in. (925 mm) 14.0 in. (355 mm)
Skid-Steer Loader 14 x 17.5 7024854 Right Orange 10.75 in. (270 mm) 37.0 in. (925 mm) 14.0 in. (355 mm)
Skid-Steer Loader 10 x 16.5 7022983 Left Gray 8.0 in. (200 mm) 30.0 in. (762 mm) 10.0 in. (250 mm)
Skid-Steer Loader 10 x 16.5 7022984 Right Gray 8.0 in. (200 mm) 30.0 in. (762 mm) 10.0 in. (250 mm)
Skid-Steer Loader 12 x 16.5 7022985 Left Gray 8.0 in. (200 mm) 33.0 in. (840 mm) 12.0 in. (300 mm)
Solid Non-Marking
Skid-Steer Loader 12 x 16.5 7022986 Right Gray 8.0 in. (200 mm) 33.0 in. (840 mm) 12.0 in. (300 mm)
Skid-Steer Loader 12 x 16.5 7277216 Left Gray 10.75 in. (270 mm) 33.0 in. (840 mm) 12.0 in. (300 mm)
Skid-Steer Loader 12 x 16.5 7277217 Right Gray 10.75 in. (270 mm) 33.0 in. (840 mm) 12.0 in. (300 mm)
Skid-Steer Loader 10 x 16.5 7313443 ND Orange 8.0 in. (203 mm) 31.0 in. (787 mm) 9.0 in. (237 mm)
Solid SD Skid-Steer Loader 12 x 16.5 7313442 ND Orange 8.0 in. (203 mm) 33.0 in. (838 mm) 11.0 in. (287 mm)
Non-Directional Skid-Steer Loader 12 x 16.5 7313441 ND Orange 10.75 in. (270 mm) 33.0 in. (838 mm) 11.0 in. (287 mm)
Skid-Steer Loader 14 x 17.5 7313440 ND Orange 10.75 in. (270 mm) 36.0 in. (914 mm) 13.0 in. (326 mm)
Skid-Steer Loader 10 x 16.5 7312257 ND Orange 8.0 in. (203 mm) 33.0 in. (838 mm) 9.0 in. (237 mm)
Solid Super Smooth Skid-Steer Loader 12 x 16.5 7312256 ND Orange 10.75 in. (270 mm) 33.0 in. (838 mm) 11.0 in. (287 mm)
Skid-Steer Loader 14 x 17.5 7313439 ND Orange 10.75 in. (270 mm) 36.0 in. (914 mm) 13.0 in. (326 mm)
Bobcat Company Aftermarket Parts Tracks, Tires & Accessories (B-22) | 213
Compact Loader Tires
RIM DIAMETER
Bobcat Company Aftermarket Parts Tracks, Tires & Accessories (B-22) | 214
Compact Tractor Tires
Agricultural Tires
Agricultural tires feature deep lugs for optimal traction and
self-cleaning in soft soil and mud. They deliver more power
to the ground when towing heavy loads or pulling implements.
Industrial Tires
Designed for maximum traction and versatility for a wide
range of applications, industrial tires provide long wear and
outstanding protection against punctures. With wider tread
than agricultural tires and deeper lugs than turf tires, industrial
tires keep operators moving in all ground conditions.
Turf Tires
Turf tires offer excellent traction while minimizing damage
and repairs to lawns and finished surfaces.
CT4045, CT4050, 7385104 Rear 47.6 in. (1209 mm) 13.6 in. (345 mm) 24.0 in. (610 mm) 6 114 lb. (52 kg)
CT4055, CT4058,
CT5545, CT5550,
CT5555, CT5558 7392987 Front 31.4 in. (798 mm) 8.4 in. (213 mm) 16.0 in. (406 mm) 10 48 lb. (22 kg)
7384906 Front 18.0 in. (457 mm) 8.5 in. (216 mm) 10.0 in. (254 mm) 4 13 lb. (6 kg)
CT1021, CT1025
7384907 Rear 26.0 in. (660 mm) 12.0 in. (305 mm) 12.0 in. (305 mm) 4 29 lb. (13 kg)
CT2025, CT2035, 7385098 Front 25.0 in. (635 mm) 8.5 in. (216 mm) 14.0 in. (356 mm) 6 29 lb. (13 kg)
CT2040, CT2535,
Industrial CT2540 7385101 Rear 15.0 in. (385 mm) 15.0 in. (385 mm) 19.5 in. (495 mm) 6 106 lb. (48 kg)
CT4045, CT4050, 7385110 Front 30.5 in. (775 mm) 10.7 in. (272 mm) 16.5 in. (419 mm) 6 48 lb. (22 kg)
CT4055, CT4058,
CT5545, CT5550,
CT5555, CT5558 7385112 Rear 48.3 in. (1227 mm) 17.6 in. (447 mm) 24.0 in. (610 mm) 6 175 lb. (79 kg)
7384904 Front 18.0 in. (457 mm) 8.5 in. (216 mm) 10.0 in. (254 mm) 4 11.7 lb. (5 kg)
CT1021, CT1025
7384905 Rear 26.0 in. (660 mm) 12.0 in. (305 mm) 12.0 in. (305 mm) 4 26.5 lb. (12 kg)
CT2025, CT2035, 7385094 Front 27.0 in. (686 mm) 8.5 in. (216 mm) 15.0 in. (385 mm) 6 26.5 lb. (12 kg)
CT2040, CT2535,
Turf CT2540 7385096 Rear 41.0 in. (1041 mm) 14.0 in. (356 mm) 20.0 in. (508 mm) 4 101 lb. (46 kg)
CT4045, CT4050, 7385106 Front 29.0 in. (737 mm) 12.5 in. (317.5 mm) 15.0 in. (385 mm) 6 37 lb. (16.6 kg)
CT4055, CT4058,
CT5545, CT5550,
CT5555, CT5558 7385108 Rear 44.0 in. (1118 mm) 18.0 in. (457 mm) 20.0 in. (508 mm) 6 134 lb. (61 kg)
8
Bobcat Company Aftermarket Parts Tracks, Tires & Accessories (B-22) | 215
SMALL
SMALL
ARTICULATED
ARTICULATED
LOADER
LOADER
TIRES
TIRES Small Articulated Loader Tires
Standard
Standard
TiresTires
Standard
Standard
tires tires
give you
givegood
you good
traction
traction
for a for
variety
a variety
of challenging
of challenging
jobs.jobs.
Tractor
Tractor
TiresTires
Tractor
Tractor
tires tires
give you
giveayou
more
a more
aggressive
aggressive
treadtread
that that
powers
powers
your your
machine
machine
through
through
soft or
soft
wet
orground.
wet ground.
Turf Turf
TiresTires
Turf tires
Turf tires
provide
provide
the best
the combination
best combination
of of
smooth
smooth
maneuverability
maneuverability
and turf-friendly
and turf-friendly
traction
traction
for sensitive
for sensitive
ground.
ground.
Standard
Standard
tire tire Turf tire
Turf tire
OUTSIDE
OUTSIDE PLY PLY
TIRE TIRE MODEL
MODEL
PARTPART
NO. NO.
TIRE SIZE
TIRE SIZE TIRE WIDTH
TIRE WIDTH
RIM DIAMETER
RIM DIAMETER MAX.MAX.
LOADLOAD
TIRE WEIGHT
TIRE WEIGHT
DIAMETER
DIAMETER RATING
RATING
Standard
Standard L23 L237343581
73435815.7 x 12
5.7 x 1223.0 in.23.0
(584in.mm)
(584 mm)
5.7 in. 5.7
(145in.mm)
(145 mm)
12.0 in.12.0
(305in.mm)
(305 mm) 4 4 1450 lb.
1450
@ 60
lb. psi
@ 60 psi
17 lb. (8
17kg)
lb. (8 kg)
L28 L28 7345776734577612 x 1212 x 1226.0 in.26.0
(660in.mm)
(660 mm)
12.0 in.12.0
(305in.mm)
(305 mm)
12.0 in.12.0
(305in.mm)
(305 mm) 8 8 3000 lb.@
300042
lb.@
psi 42 psi
35 lb. (16
35 lb.
kg)(16 kg)
TractorTractor
L23, L28
L23, L28
7346389
73463898.5 x 12
8.5 x 1223.0 in.23.0
(584in.mm)
(584 mm)
8.5 in.8.5
(216in.mm)
(216 mm)
12.0 in.12.0
(305in.mm)
(305 mm) 12 12 2680 lb.
2680
@ 90
lb. psi
@ 9027.5
psi lb.27.5
(12.5
lb.kg)
(12.5 kg)
7345775
734577512 x 1212 x 1226.0 in.26.0
(660in.mm)
(660 mm)
12.0 in.12.0
(305in.mm)
(305 mm)
12.0 in.12.0
(305in.mm)
(305 mm) 8 8 3053 lb.
3053
@ 50
lb. psi
@ 50 psi
33 lb. (15
33 lb.
kg)(15 kg)
Turf Turf L23, L28 7345984
L23, L28 734598410.5 x 10.5
12 x 12
23.0 in.23.0
(584in.mm) 10.5 in.10.5
(584 mm) (267in.mm)
(267 mm)
12.0 in.12.0
(305in.mm)
(305 mm) 8 8 2138 lb.
2138
@ 42
lb.psi
@ 42 23
psilb. (10.5
23 lb.kg)
(10.5 kg)
7346387
73463878.5 x 12
8.5 x 1223.0 in.23.0
(584in.mm) 8.5 in.8.5
(584 mm) (216in.mm)
(216 mm)
12.0 in.12.0
(305in.mm)
(305 mm) 10 10 2380 lb.
2380
@ 80
lb. psi
@ 80 psi
24 lb. (11
24 lb.
kg)(11 kg)
9 9
Bobcat Company Aftermarket Parts Tracks, Tires & Accessories (B-22) | 216
Telehandler Tires
TELEHANDLER TIRES
TELEHANDLER TIRES
Agricultural/Industrial TiresTires
Agricultural/Industrial
TheseThese
tires tires
feature deepdeep
feature lugs for
lugsthe
forbest
the traction, stability
best traction, and and
stability
balance crucial
balance for the
crucial forperformance and proper
the performance operation
and proper of of
operation
your your
telehandler.
telehandler.
Heavy-Duty TiresTires
Heavy-Duty
Extra-thick sidewalls
Extra-thick and bead
sidewalls guards
and bead on these
guards heavy-
on these heavy-
duty duty
tires tires
shieldshield
against rim and
against rimsidewall punctures.
and sidewall punctures.
The combination
The combinationof superior self-cleaning
of superior rubber
self-cleaning and and
rubber
a high ply rating
a high makes
ply rating thesethese
makes tires tires
ideal ideal
for rough,
for rough,
high-hour applications
high-hour suchsuch
applications as rental, construction,
as rental, construction,
landscaping and industrial
landscaping jobs.jobs.
and industrial
PARTPART OUTSIDE
OUTSIDE TIRE WIDTH RIM DIAMETER PLY PLY
TIRE TIRE MODEL
MODEL TIRE WIDTH RIM DIAMETER MAX.MAX.
LOADLOAD WEIGHT
WEIGHT
NO. NO. DIAMETER
DIAMETER RATING
RATING
V518, V518,
V723,V723,
VR518,
VR518,
7225564 43.0 in.43.0
7225564 (1085 mm) mm)
in. (1085 15.9 in.15.9
(403in.mm) 20.0 in.20.0
(403 mm) (508in.mm)
(508 mm)14 1414,08014,080
lb. @ 45
lb.psi
@ 45 161
psi lb.161
(73lb.
kg)(73 kg)
VR530C, VR723VR723
VR530C,
V518, V518,
V623, V623,
V723,V723,
VR518, VR530C,
VR518, VR530C,7160222 42.0 in.42.0
7160222 (1067 mm) mm)
in. (1067 16.0 in.16.0
(406in.mm) 20.0 in.20.0
(406 mm) (508in.mm)
(508 mm)15 1511,57411,574
lb. @ 39
lb.psi 157 lb.157
@ 39 psi (71lb.
kg)(71 kg)
Ag/Industrial
Ag/Industrial VR723VR723
V519 V519 7253906 43.0 in.43.0
7253906 (1085 mm) mm)
in. (1085 17.4 in.17.4
(442in.mm) 20.0 in.20.0
(442 mm) (508in.mm)
(508 mm)16 1620,41620,416
lb. @ 75
lb.psi 161 lb.161
@ 75 psi (73lb.
kg)(73 kg)
V638, V638,
V723,V723,
VR530C,
VR530C,
7230672 49.0 in. (1245 mm) 15.8 in. (401 mm) 24.0 in. (610 mm) 20 2023,07823,078
lb. @ 72
lb.psi
@ 72 198
psi lb.198
(89lb.
kg)(89 kg)
VR638, VR723,
VR638, V923 V923 7230672 49.0 in. (1245 mm) 15.8 in. (401 mm) 24.0 in. (610 mm)
VR723,
Heavy-Duty
Heavy-Duty V417 V417 6987714 35.0 in.35.0
6987714 (889in.mm) 14.0 in.14.0
(889 mm) (356in.mm) 17.5 in.17.5
(356 mm) (445in.mm)
(445 mm)14 14 5357 lb. @ 80
5357 lb.psi
@ 80 140.5
psi lb. (63lb.
140.5 kg)(63 kg)
10 10
Bobcat Company Aftermarket Parts Tracks, Tires & Accessories (B-22) | 217
TOOLCAT UTILITY
TOOLCAT WORK
UTILITY MACHINE
WORK TIRES
MACHINE TIRESToolcat Utility Work Machine Tires
FloatFloat
TiresTires
The wide sidewalls
The wide of theoffloat
sidewalls tires tires
the float
are designed
are designed to perform in or
to perform in soft soft or
wet soil
wetconditions.
soil conditions.
General-Purpose TiresTires
General-Purpose
TheseThese
versatile tires tires
versatile perform greatgreat
perform in in
a variety of applications.
a variety of applications.
Turf Turf
TiresTires
Turf tires protect
Turf tires the ground
protect fromfrom
the ground
damage during
damage landscaping
during jobs.jobs.
landscaping
Snow TiresTires
Snow
SnowSnow
tires tires
provide the power
provide the power
and traction required
and traction in harsh
required in harsh
winter conditions.
winter conditions.
OUTSIDE
OUTSIDE TIRE WIDTH RIM DIAMETER PLY PLY TIRE TIRE
TIRE TIRE MODEL
MODELSTYLESTYLE
PARTPART
NO. NO. TIRE WIDTH RIM DIAMETER MAX.MAX.
LOADLOAD
DIAMETER
DIAMETER RATING
RATING WEIGHT
WEIGHT
Float Float 5600, 5600,
5610 5610
Standard 7211382
Standard 31.0 in.31.0
7211382 (787in.mm) 12.0 in.12.0
(787 mm) (305in.mm) 16.5 in.16.5
(305 mm) (419in.mm)
(419 mm)10 10 4460 lb. @ 55
4460 lb. psi
@ 55 61
psilb. (28 kg)(28 kg)
61 lb.
5600 5600Standard 6680056
Standard 27.0 in.27.0
6680056 (686in.mm) 10.5 in.10.5
(686 mm) (267in.mm) 15.0 in.15.0
(267 mm) (381in.mm)
(381 mm) 6 6 2610 lb. @ 45
2610 lb. psi 33 lb. (15
@ 45 psi kg)(15 kg)
33 lb.
General Purpose
General Purpose Standard 7023289
Standard 27.0 in.27.0
7023289 (686in.mm) 10.5 in.10.5
(686 mm) (267in.mm) 15.0 in.15.0
(267 mm) (381in.mm)
(381 mm) 8 8 3130 lb. @ 60
3130 lb. psi 43 lb. (19
@ 60 psi kg)(19 kg)
43 lb.
5600, 5600,
5610 5610
Standard 7023288
Standard 29.0 in.29.0
7023288 (737in.mm) 10.5 in.10.5
(737 mm) (267in.mm) 15.0 in.15.0
(267 mm) (381in.mm)
(381 mm)10 10 4470 lb. @ 75
4470 lb.psi
@ 75 47
psi lb. (21 kg)(21 kg)
47 lb.
Standard 7166360
Standard 29.0 in.29.0
7166360 (737in.mm) 12.5 in.12.5
(737 mm) (318
in.mm) 15.0 in.15.0
(318 mm) (381in.mm)
(381 mm) 8 8 2150 lb. @ 45
2150 lb. psi
@ 45 48
psi lb. (22 kg)(22 kg)
48 lb.
Turf Turf 5600, 5600,
5610 5610
Standard 6682461
Standard 27.0 in.27.0
6682461 (686in.mm) 10.5 in.10.5
(686 mm) (267in.mm) 15.0 in.15.0
(267 mm) (381in.mm)
(381 mm)10 10 2200 lb. @ 75
2200 lb.psi
@ 75 38
psi lb. (17 kg)(17 kg)
38 lb.
5600, 5600,
5610, 5610,
Snow Snow UW35,UW35,Standard 7425595
Standard 29.7 in.29.7
7425595 (754in.mm) 7.0 in. 7.0
(754 mm) (178in.mm) 15.0 in.15.0
(178 mm) (381in.mm)
(381 mm)10 10 2335 lb. @ 80
2335 lb. psi
@ 8022
psilb. (70.8
22 lb. kg)
(70.8 kg)
UW56UW56
5600, 5600,
5610, 5610,
Snow Snow
Tire Assy
Tire AssyUW35,UW35,Standard 7425593
Standard 29.7 in.29.7
7425593 (754in.mm) 7.0 in. 7.0
(754 mm) (178in.mm) 15.0 in.15.0
(178 mm) (381in.mm)
(381 mm)10 10 2335 lb. @ 80
2335 lb. psi
@ 8022
psilb. (70.8
22 lb. kg)
(70.8 kg)
UW56UW56
11 11
Bobcat Company Aftermarket Parts Tracks, Tires & Accessories (B-22) | 218
UTILITY VEHICLE TIRES Utility Vehicle Tires
UTILITY
UTILITY VEHICLE
VEHICLE TIRESTIRES
All-Terrain Tires TIRE MODEL
All-Terrain
Balanced
Tires Tires
performance
All-Terrain
and traction provide excellent TIRE TIRE MODEL
MODEL
MODEL3450,
3200, 3400, 3400XL, 3600, 3650 P
performance for any terrain that’s in front of you.
BalancedBalanced performance
performance and traction
and traction provide excellent
provide excellent All-Terrain 3200, 3400, 3400XL, 3450, 3600, 3650
3200, 3400, 3400XL, 3450, 3600, 3650
performance
performance for any terrain that’s in front of you.
Mud Tiresfor any terrain that’s in front of you. All-Terrain
All-Terrain 3200, 3400, 3400XL, 3450
DurableMud
Tires Tires
in extreme conditions with heavy loads, these 3200, 3400, 3400XL, 3450
Mud
tires provide better traction in deep mud. Aggressive Mud
3200, 3400, 3400XL, 3450
3400, 3400XL, 3600, 3650
Durable Durable in extreme conditions
in extreme with heavytheseloads, these
tread patterns are conditions with
designed for anyheavy
trail, loads,
whether in the
tires tires
provide provide
better better traction in deep mud.
traction in deep mud. Aggressive Aggressive Mud
Mud 3400, 3400XL, 3600, 3650
3400, 3400XL, 3600, 3650
woods or the desert.
tread patterns
tread patterns are designed
are designed for any
for any trail, trail, whether
whether in the in the
Turf 3200, 3400, 3400XL, 3450, 3600, 3650
12
12 12
Bobcat Company Aftermarket Parts Tracks, Tires & Accessories (B-22) | 219
Utility Vehicle Tires
PART NO.
PART NO. BASE BASE OUTSIDE DIAMETER
OUTSIDE DIAMETER TIRE WIDTH
TIRE WIDTH RIM DIAMETER
RIM DIAMETER TIRE WEIGHT
TIRE WEIGHT
70271467027146 Front Front 25.0 in. 25.0
(635 in.
mm)(635 mm) 10.0 in. 10.0
(254 in.
mm)(254 mm) 12.0 in. 12.0
(305 in.
mm)(305 mm) 19 lb. (8.6
19 kg)
lb. (8.6 kg)
70271477027147 Rear Rear 25.0 in. 25.0
(635 in.
mm)(635 mm) 11.0 in. (279 mm)
11.0 in. (279 mm) 12.0 in. 12.0
(305 in.
mm)(305 mm) 21 lb. (9.5
21 kg)
lb. (9.5 kg)
70192077019207 Front Front 25.0 in. 25.0
(635 in.
mm)(635 mm) 10.0 in. 10.0
(254 in.
mm)(254 mm) 12.0 in. 12.0
(305 in.
mm)(305 mm) 17 lb. (7.7
17kg)
lb. (7.7 kg)
70192087019208 Rear Rear 25.0 in. 25.0
(635 in.
mm)(635 mm) 11.0 in. (279 mm)
11.0 in. (279 mm) 12.0 in. 12.0
(305 in.
mm)(305 mm) 20 lb. (920
kg)lb. (9 kg)
73076797307679 Front Front 26.0 in. 26.0
(660 in.
mm)(660 mm) 9.0 in. (229 mm)
9.0 in. (229 mm) 12.0 in. 12.0
(305 in.
mm)(305 mm) 26 lb. (12
26kg)
lb. (12 kg)
73076807307680 Rear Rear 26.0 in. 26.0
(660 in.
mm)(660 mm) 11.0 in. (279 mm)
11.0 in. (279 mm) 12.0 in. 12.0
(305 in.
mm)(305 mm) 31 lb. (14
31kg)
lb. (14 kg)
69890656989065 Front Front 25.0 in. 25.0
(635 in.
mm)(635 mm) 9.0 in. (229 mm)
9.0 in. (229 mm) 12.0 in. 12.0
(305 in.
mm)(305 mm) 20 lb. (920
kg)lb. (9 kg)
69890666989066 Rear Rear 25.0 in. 25.0
(635 in.
mm)(635 mm) 11.0 in. (279 mm)
11.0 in. (279 mm) 12.0 in. 12.0
(305 in.
mm)(305 mm) 23 lb. (10
23kg)
lb. (10 kg)
70276547027654 Front Front 25.0 in. 25.0
(635 in.
mm)(635 mm) 10.0 in. 10.0
(254 in.
mm)(254 mm) 12.0 in. 12.0
(305 in.
mm)(305 mm) 22 lb. (10
22kg)
lb. (10 kg)
70276557027655 Rear Rear 25.0 in. 25.0
(635 in.
mm)(635 mm) 11.0 in. (279 mm)
11.0 in. (279 mm) 12.0 in. 12.0
(305 in.
mm)(305 mm) 22 lb. (10
22kg)
lb. (10 kg)
73603807360380 Non-Directional
Non-Directional 26.0 in. 26.0
(660 in.
mm)(660 mm) 10.0 in. 10.0
(254 in.
mm)(254 mm) 12.0 in. 12.0
(305 in.
mm)(305 mm) 34 lb. (15.6 kg)(15.6 kg)
34 lb.
70271447027144 Front Front 25.0 in. 25.0
(635 in.
mm)(635 mm) 8.5 in. (216 mm)
8.5 in. (216 mm) 12.0 in. 12.0
(305 in.
mm)(305 mm) 18 lb. (818
kg)lb. (8 kg)
70271457027145 Rear Rear 25.0 in. 25.0
(635 in.
mm)(635 mm) 10.5 in. 10.5
(267 in.
mm)(267 mm) 12.0 in. 12.0
(305 in.
mm)(305 mm) 29 lb. (13
29kg)
lb. (13 kg)
13 13
Bobcat Company Aftermarket Parts Tracks, Tires & Accessories (B-22) | 220
Compact Wheel Loader Tires
The Bobcat compact wheel loader (CWL) versatile block tread design enables high performances on snow-covered or sandy
terrains. The tread pattern is an optimized on/off road pattern with shoulder lugs for traction in the fields, and the basic
directional lug design, divided by separated blocks, provides a good grip on soft surfaces. In addition, the high number of
blocks and rubber-to-void tread ratio enable long tread wear life and low rolling resistances during transport operation on
hard surfaces. Uniform ground pressure distribution and tread wear are provided by a steel-belted carcass structure, which
provides the most efficient puncture protection.
OUTSIDE
TIRE MODEL PART NO. TIRE WIDTH RIM DIAMETER MAX. LOAD TIRE WEIGHT
DIAMETER
L65 7331619 38.1 in. (969 mm) 14.3 in. (365 mm) 18.0 in. (457 mm) 5185 lb. (2340 kg) 106 lb. (48.2 kg)
L85 7331628 40.3 in. (1024 mm) 15.9 in. (405 mm) 18.0 in. (457 mm) 6126 lb. (2778 kg) 115 lb. (52.5 kg)
Standard
7331594 39.4 in. (1001 mm) 13.1 in. (335 mm) 18.0 in. (457 mm) 6124 lb. (2778 kg) 110 lb. (49.8 kg)
L65, L85
7331578 42.3 in. (1076 mm) 15.9 in. (405 mm) 20.0 in. (508 mm) 6437 lb. (2920 kg) 135 lb. (61.4 kg)
14
Bobcat Company Aftermarket Parts Tracks, Tires & Accessories (B-22) | 221
Tire Chains
C D E
Bobcat Company Aftermarket Parts Towing, Trailer, and Storage (A-17) | 222
Tire Chains
Bobcat Chain
Tire Size Sold As Part Description Image
Part Number
5.7 X 12 6988480 PAIR CHAIN, TIRE 119 SERIES TRACTION – PR A
6 x 12 6988480 PAIR CHAIN, TIRE 119 SERIES TRACTION – PR A
7 x 14 6988482 EACH CHAIN, TIRE HEAVY DUO-TRAC C
7 X16 6988484 EACH CHAIN, TIRE HEAVY DUO-TRAC C
6901560 PAIR CHAIN, TIRE HEAVY DUTY 4 LINK SPACING-PR A
6988991 PAIR CHAIN, TIRE HEAVY DUTY 2 LINK SPACING – PR A
8 X16 6988988 PAIR CHAIN, TIRE HI-WAY SERVICE – PR F
6988992 PAIR CHAIN, TIRE HEAVY DUTY SQUARE LINK – PR H
6988490 EACH CHAIN, TIRE HEAVY DUO-TRAC C
8.5 X 15 6988980 PAIR CHAIN, TIRE HEAVY DUTY TIRE – PR A
6988975 EACH CHAIN, TIRE HEAVY DUO-TRAC C
9.5 X 16 6988472 PAIR CHAIN, TIRE 2200 SERIES NON-REINFORCED – PR E
6988473 PAIR CHAIN, TIRE 2800 SERIES V-BAR – PR G
6901560 PAIR CHAIN, TIRE HEAVY DUTY 4 LINK SPACING-PR A
6988991 PAIR CHAIN, TIRE HEAVY DUTY 2 LINK SPACING – PR A
10 X 16.5 6988976 EACH CHAIN, TIRE HEAVY DUO-TRAC C
6988988 PAIR CHAIN, TIRE HI-WAY SERVICE – PR F
6988992 PAIR CHAIN, TIRE HEAVY DUTY SQUARE LINK – PR H
6988994 PAIR CHAIN, TIRE HEAVY DUTY 2 LINK SPACING – PR A
6901562 PAIR CHAIN, TIRE HEAVY DUTY 4 LINK SPACING-PR A
6988977 EACH CHAIN, TIRE HEAVY DUO-TRAC C
12 X 16.5
6988494 PAIR CHAIN, TIRE 3200 SERIES NON-REINFORCED – PR F
6988475 PAIR CHAIN, TIRE 3800 SERIES V-BAR – PR G
6988995 PAIR CHAIN, TIRE HEAVY DUTY SQUARE LINK – PR H
6988485 EACH CHAIN, TIRE HEAVY DUO-TRAC C
12.4 X 24
6988978 EACH CHAIN, TIRE HEAVY DUO-TRAC D
6988985 PAIR CHAIN, TIRE HEAVY EQUIPMENT – PR D
13 X 24
6988491 EACH CHAIN, TIRE HEAVY DUO-TRAC C
6988491 EACH CHAIN, TIRE HEAVY DUO-TRAC C
13.6 X 24
6988979 EACH CHAIN, TIRE HI-WAY SERVICE D
6901563 PAIR CHAIN, TIRE HEAVY DUTY 4 LINK SPACING-PR A
14 X 17.5 6988981 PAIR CHAIN, TIRE HEAVY DUTY CROSS – PR A
6988996 PAIR CHAIN, TIRE HEAVY DUTY 2 LINK SPACING – PR A
14 X 20 6988985 PAIR CHAIN, TIRE HEAVY EQUIPMENT – PR D
6988491 EACH CHAIN, TIRE HEAVY DUO-TRAC C
14.9 X 24
6988495 EACH CHAIN, TIRE 108 SERIES D
15 X 19.5 6988477 PAIR CHAIN, TIRE 3200 SERIES NON-REINFORCED – PR F
Bobcat Company Aftermarket Parts Towing, Trailer, and Storage (A-17) | 223
Tire Chains
Bobcat Chain
Tire Size Sold As Part Description Image
Part Number
6988971 PAIR CHAIN, TIRE 4 LINK CROSS CHAIN SPACING - PR B
6988973 PAIR CHAIN, TIRE HEAVY DUTY 4 LINK W/V-BAR - PR B
23 X 10.5 X 12
6988972 PAIR CHAIN, TIRE 2 LINK CROSS CHAIN SPACING - PR B
6988974 PAIR CHAIN, TIRE HEAVY DUTY 2 LINK W/V-BAR - PR B
23 X 5.7 X 12 6988480 PAIR CHAIN, TIRE 119 SERIES TRACTION - PR A
6988465 PAIR CHAIN, TIRE 4 LINK CROSS CHAIN SPACING - PR B
23 X 8 X 12
6988464 PAIR CHAIN, TIRE 2 LINK CROSS CHAIN SPACING - PR B
6988465 PAIR CHAIN, TIRE 4 LINK CROSS CHAIN SPACING - PR B
23 X 8.50 X 12
6988464 PAIR CHAIN, TIRE 2 LINK CROSS CHAIN SPACING - PR B
6988973 PAIR CHAIN, TIRE HEAVY DUTY 4 LINK W/V-BAR - PR B
25 X 11
6988974 PAIR CHAIN, TIRE HEAVY DUTY 2 LINK W/V-BAR - PR B
Bobcat Company Aftermarket Parts Towing, Trailer, and Storage (A-17) | 224
Tractor Tire Chains
CT2025, 43.4 in (1102mm) 11.2 in. (284 mm) 6988483 Each CHAIN, TIRE HEAVY DUO-TRAC C
CT2035, 27 in. (686 mm) 8.5 in. (216 mm)
CT2040, CHAIN,TIRE 3200 SERIES NON-
41 in. (1041 mm) 14 in. (356 mm) 6988471 Pair F
CT2535, REINFORCED
CT2540 25 in. (635 mm) 8.5 in. (216 mm) 6988482 Each CHAIN, TIRE HEAVY DUO-TRAC C
40 in. (1016 mm) 15 in. (385 mm) 7430336 Each CHAIN 40x15 DUO-TRAC C
31.4 in. (798 mm) 8.4 in. (213 mm) 6988490 Each CHAIN, TIRE HEAVY DUO-TRAC C
CT4045,
47.6 in. (1209 mm) 13.6 in. (345 mm) 6988491 Each CHAIN, TIRE HEAVY DUO-TRAC C
CT4050,
CT4055, 29 in. (737 mm) 12.5 in. (317.5 mm)
CT4058, 44 in. (1118 mm) 18 in. (457 mm) 6988491 Each CHAIN, TIRE HEAVY DUO-TRAC C
CT5545, 6988991 Pair CHAIN, TIRE HEAVY DUTY 2 LINK SPACING A
CT5550, 30.5 in. (775 mm) 10.7 in. (272 mm)
6988992 Pair CHAIN, TIRE HEAVY DUTY SQUARE LINK H
CT5555,
7430337 Each CHAIN 48X17.5 HI-WAY AG LADDER F
CT5558 48.3 in. (1227 mm) 17.6 in. (447 mm)
7430331 Each CHAIN 48X17.5 DUO-TRAC C
Bobcat Company Aftermarket Parts Towing, Trailer, and Storage (D-11) | 225
SureValve Tire Valve
Prevents air, dirt and moisture Corrosive dirt, air and moisture
from penetrating and corroding have access to the valve core.
the valve core.
Unscrew and replace without Valve core sits above the rim,
removing tire from the rim. vulnerable to breakage and
damage. Results in immediate,
catastrophic loss of air if severed.
Your customers will appreciate the quality of this Bobcat lug wrench.
When the tire is punctured the sealant forms a The 32 oz. container size allows for convenient
temporary seal. By removing the puncturing object installation of Bobcat Premium Tire Sealant
and rotating the tire, the sealant replaces the object
• Ready to install; no mixing
forming a permanent seal. This sealant is designed
to seal the tread area from punctures up to 1/4" in • Visible measuring gauge
diameter, and will not seal punctures in the sidewall.
Part Description
6903225 32 oz. container
multiples of 12
6903226 5 gallon pail (640 oz.)
plastic pail with handle
6903227 55 gallon drum
shipped direct from manufacturer
6659537 Calibrated Pump
comes with core tool and
operations guide
6988904 – Scraper
Forged head type, 7" x 6" head size,
54" hardwood handle.
6901429 – Mini-PRO
Mini-PRO, round point, overall length 27", front
turned step, black head color, 5" hardwood handle,
square socket, PermaGrip™ collar, poly D-grip. Ideal
for car trunks, concrete work and track cleaning.
6675760 – Squeegee/Scraper
24" combination head, 60" yellow fiberglass,
cushion handle. (Sold in multiples of 2)
Work Tools
6675763 – Pick/Matlock
Steel head, 36" yellow fiberglass handle.
(Sold in multiples of 4)
6675775 – Scraper
Riveted head type, 7" x 5" head size, 48" hardwood
handle. (Sold in multiples of 2)
Replacement Parts
LokBlok™ feature
• Temperature Range:
-58°F to 932°F (-50°C to 500°C)
• Field of View: 12 : 1
• Packaged in blow molded box
Specifications:
Part # 6989255
Emissivity 0.98
In addition to the existing kit (6675268), two new o-ring kit s are now available to help you offer the best, most
efficient service. These kits contain an assortment of the most commonly used o-rings and are perfect for use
on your service trucks or in your shop.
The kits are also great to display on your parts shelves to sell to customers who do their own service
work. Display with Bobcat silicone o-ring lubricant (6678767) to offer your customers your full range of
o-ring products.
The kits come in a sturdy, attractive container that can be replenished by ordering individual o-rings. Spacers
can be removed to adjust the kit’s compartments to your liking. And a large, easy to read list shows the kit’s
contents and the o-ring locations in the container.
A silicone based lubricant for plastic and rubber o-rings is available from Bobcat® Parts. The 1/3 oz. tube is
sold in multiples of one under part number 6678767.
Super-O-Lube® – as the product is called – is recommended as an assembly aid for o-ring seals. Only a thin
film of the lubricant is necessary. It can also improve seal-ability in vacuum and high pressure systems and
makes an excellent thread lubricant and anti-seize agent on plastic and rubber materials.
O-Ring Lubricant
Part Number 6678767
• Plug into the trailer plug socket and activate the lights,
brakes, turn signals, etc.
• Watch the LEDs. They indicate that each circuit is
complete and current is getting to the plug
• “Winged” grip for easy removal from electrical connector
6988967 – 7-Way Flat Pin Tractor Trailer Circuit Tester
Bobcat Company Aftermarket Parts Towing, Trailer and Storage (F-10) | 249
Towing Maintenance
Bobcat Company Aftermarket Parts Towing, Trailer and Storage (F-10) | 250
Bobcat Transportation/Storage Covers
Bobcat Company Aftermarket Parts Towing, Trailer and Storage (H-20) | 251
Bobcat Hitch Accessories
The Bobcat hitch accessories offer a wide range of versatility, from dedicated pintle and combination pintle
hitches, to three styles of straight and drop style mounts. In addition, standard 1 inch shank hitch balls are
offered in popular 1-7/8 inch, 2 inch and 2-5/16 inch sizes. Your customers will have a good selection of hitch
products to choose from.
Hitch Pins
6902420 Hitch pin with cotter-pin
Bobcat Company Aftermarket Parts Towing, Trailer and Storage (D-08) | 252
Bobcat Hitch Accessories
12,000 lbs. M.G.T.W., 2,400 lbs. maximum vertical load. Receiver mount pintle hook has 10,000 lbs. M.G.T.W.
capacity with 2,000 lbs. maximum vertical load.
6902371 – Receiver with pintle (5 Ton)
Hitch pin (part number 6902420) sold separately.
6902373 – R
eceiver with combination pintle & 2 5/16 inch ball (6 Ton)
Hitch pin (part number 6902420) sold separately.
Product Information:
Part Number Description Rubber Length Pkg Qty.
7246609 14" Rubber tie-down strap 9" 10
7246610 19" Rubber tie-down strap 15" 10
7246611 24" Rubber tie-down strap 20" 10
7246612 29" Rubber tie-down strap 24" 10
7246613 35" Rubber tie-down strap 31" 10
Bobcat Company Aftermarket Parts Towing, Trailer and Storage (D-14) | 254
Tie Downs and Utility Straps
StrapPak™
6988664
With StrapPak™, you’ll never again have to resort to duct tape or cable
ties to secure the loose end of straps. StrapPak™ attaches to any
standard 2" ratchet strap and will safely secure excess web on straps up
to 30 feet in length. You can use StrapPak™ on any open-air or enclosed
trailer or utility truck, and it also provides a great storage solution for your
strap assemblies when they’re not in use.
6664481
2" Ratchet Strap with Flat Hook
Strap Length: 27'
Working Load Limit: 3,335 lbs., 1515 kgs.
6664482
2" Ratchet Strap with Grab Hook
Strap Length: 15'
Working Load Limit: 3,335 lbs., 1515 kgs.
6664483
2" Ratchet Strap with Snap Hook
Strap Length: 27'
Working Load Limit: 3,335 lbs., 1515 kgs.
Bobcat Company Aftermarket Parts Towing, Trailer and Storage (E-09) | 255
Tie Downs and Utility Straps
1" Ratchet Strap with 800 Ratchet, Wire Hooks and D-Rings
6664484
One-inch ratchet and utility straps are great for securing cargo
in pick‑up trucks, car top racks or boat trailers, anywhere a
light-duty tie‑down is needed.
Binder Chains
Part Number Size
7329333 3/8" x 20'
7329336 5/16" x 16'
Tire Chains
Part Number Tire Size Part Description
7329250 10 X 16.5 Studded Talon Chains, H Pattern
7329244 12 X 16.5 Extreme Duty Tire Chain, 2 Link Pattern
QuikBinder
Chain Grade & Size (In.) Take-up Handle Length (In.) Qty Per Lbs Per Working Load Limit BOBCAT
G70 G80 G100 Inches Folded Straight Package Package Lbs. Kgs. Part No.
5/16 & 3/8 5/16 & 3/8 5/16 6.00 9.50 13.90 4 46 7,100 3,220 H5125-0658
3/8 & 1/2 3/8 & 1/2 3/8 6.00 9.50 13.90 4 56 12,000 5,443 H5125-0858
1/2 & 5/8 1/2 & 5/8 1/2 6.00 9.50 13.90 2 37 18,000 8,210 H5125-0958