0% found this document useful (0 votes)
82 views11 pages

General Visual Inspection of L - G Brake Units

This document provides instructions for performing a general visual inspection of landing gear brake units on an aircraft. It lists safety warnings to follow and references other tasks. The job set-up information specifies fixtures, tools, and work zones needed. Step 1 states the reason for the inspection is a scheduled maintenance task. Step 2 provides job set-up details, including safety barriers, warning notices, and referenced aircraft zones and information.

Uploaded by

Yaser Sahibole
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
82 views11 pages

General Visual Inspection of L - G Brake Units

This document provides instructions for performing a general visual inspection of landing gear brake units on an aircraft. It lists safety warnings to follow and references other tasks. The job set-up information specifies fixtures, tools, and work zones needed. Step 1 states the reason for the inspection is a scheduled maintenance task. Step 2 provides job set-up details, including safety barriers, warning notices, and referenced aircraft zones and information.

Uploaded by

Yaser Sahibole
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

JOB CARD PACKAGE TITLE: IGO -

General Visual Inspection of L/G Brake Units Tail Number - MSN -


FSN
ALL

MPD Reference Title DocType

324000-16 32-40-00-210-801-A General Visual Inspection of L/G Brake Units AMM

Job Cards Package is made of: 1 job cards.

JCP Title: General Visual CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 1 of 2


Inspection of L/G Brake Units PRINT DATE: Jul 07/2023
CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
JOB CARD PACKAGE TITLE: IGO -
General Visual Inspection of L/G Brake Units Tail Number - MSN -
FSN
ALL

INTENTIONALLY LEFT BLANK

JCP Title: General Visual CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 2 of 2


Inspection of L/G Brake Units PRINT DATE: Jul 07/2023
CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
REV DATE: May
JOB CARD
01/2023
AMM - IGO - A318/A319/A320/A321 TASK:
32-40-00-210-801-A
32-40-00-06 CONF 00
Tail Number - MSN - TITLE:
MPD TASK:
FSN: 32-40-00-210-801-A - General Visual Inspection of L/G Brake 324000-16
ALL Units

MECH. INSP.

** ON A/C FSN ALL


TASK 32-40-00-210-801-A
General Visual Inspection of L/G Brake Units

WARNING: PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN


POSITION BEFORE YOU START A TASK ON OR NEAR:
- THE FLIGHT CONTROLS
- THE FLIGHT CONTROL SURFACES
- THE LANDING GEAR AND THE RELATED DOORS
- COMPONENTS THAT MOVE.
MOVEMENT OF COMPONENTS CAN KILL OR CAUSE INJURY TO
PERSONS AND/OR CAN CAUSE DAMAGE TO THE EQUIPMENT.

WARNING: MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN


POSITION ON THE LANDING GEAR. THIS WILL PREVENT
UNWANTED MOVEMENT OF THE LANDING GEAR, AND THUS
POSSIBLE INJURY TO PERSONS AND DAMAGE TO THE
AIRCRAFT AND/OR EQUIPMENT.

WARNING: LET THE BRAKES AND THE WHEELS BECOME COOL BEFORE
YOU GO NEAR THE LANDING GEAR. DO NOT APPLY A LIQUID
OR GAS DIRECTLY ON A HOT WHEEL OR BRAKE UNIT. THIS CAN
CAUSE A TIRE EXPLOSION AND/OR A WHEEL RIM BURST.

1. Reason for the Job


Refer to the MPD TASK: 324000-16
GENERAL VISUAL INSPECTION OF L/G BRAKE UNITS
To be done together with the brake-unit wear check.

2. Job Set-up Information

A. Fixtures, Tools, Test and Support Equipment

REFERENCE QTY DESIGNATION


No specific AR SAFETY BARRIER(S)
No specific AR WARNING NOTICE(S)

JCP Title: General Visual CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 1 of 9


Inspection of L/G Brake Units PRINT DATE: Jul 07/2023
CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
REV DATE: May
JOB CARD
01/2023
AMM - IGO - A318/A319/A320/A321 TASK:
32-40-00-210-801-A
32-40-00-06 CONF 00
Tail Number - MSN - TITLE:
MPD TASK:
FSN: 32-40-00-210-801-A - General Visual Inspection of L/G Brake 324000-16
ALL Units

MECH. INSP.

B. Work Zones and Access Panels

ZONE/ACCESS ZONE DESCRIPTION


731 L.H MAIN GEAR
741 R.H MAIN GEAR

C. Referenced Information

REFERENCE DESIGNATION
Ref. Energize the Aircraft Electrical Circuits from
24-41-00-861-002-A the External Power
Ref. Energize the Aircraft Electrical Circuits from
24-41-00-861-002- the APU
A01
Ref. Energize the Aircraft Electrical Circuits from
24-41-00-861-002- Engine 1(2)
A02
Ref. De-energize the Aircraft Electrical Circuits
24-41-00-862-002-A Supplied from the External Power
Ref. De-energize the Aircraft Electrical Circuits
24-41-00-862-002- Supplied from the APU
A01
Ref. De-energize the Aircraft Electrical Circuits
24-41-00-862-002- Supplied from the Engine 1(2)
A02
Ref. Removal of the Brake
32-42-27-000-001-A
Ref. Inspection/Check of the Brake with the Wheel
32-42-27-210-001-A Installed
Ref. Installation of the Brake
32-42-27-400-001-A

JCP Title: General Visual CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 2 of 9


Inspection of L/G Brake Units PRINT DATE: Jul 07/2023
CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
REV DATE: May
JOB CARD
01/2023
AMM - IGO - A318/A319/A320/A321 TASK:
32-40-00-210-801-A
32-40-00-06 CONF 00
Tail Number - MSN - TITLE:
MPD TASK:
FSN: 32-40-00-210-801-A - General Visual Inspection of L/G Brake 324000-16
ALL Units

MECH. INSP.

REFERENCE DESIGNATION

** ON A/C FSN 073-074, 076-079, 081-084, 087-089, 091-091, 093-100,


151-200, 226-226, 229-229, 231-233, 235-235, 237-238, 242-250,
301-302, 304-413, 415-415, 500-608, 610-622, 632-650
Ref. Fig. Landing-Gear Brake Units

** ON A/C FSN 414-414, 416-499, 651-700


Ref. Fig. Landing-Gear Brake Units

** ON A/C FSN ALL


3. Job Set-up

SUBTASK 32-40-00-860-057-A
A. Aircraft Maintenance Configuration
(1) Energize the aircraft electrical circuits
Ref. AMM TASK 24-41-00-861-002.

SUBTASK 32-40-00-941-053-A
B. Safety Precautions
(1) As necessary, use the applicable SAFETY BARRIER(S),
specified by the operator's instructions and your local
regulations.
(2) Make sure that the CHOCK - WHEEL(S) are in position.
(3) In the cockpit, on the right-center instrument panel (400VU),
put the WARNING NOTICE(S) in position to tell persons not to
operate the landing-gear control lever (6GA).
(4) In the cockpit, put the WARNING NOTICE(S) in position to tell
persons not to operate the brake pedals.
(5) In the cockpit, on the rudder-trim/parking brake panel (110VU):

JCP Title: General Visual CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 3 of 9


Inspection of L/G Brake Units PRINT DATE: Jul 07/2023
CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
REV DATE: May
JOB CARD
01/2023
AMM - IGO - A318/A319/A320/A321 TASK:
32-40-00-210-801-A
32-40-00-06 CONF 00
Tail Number - MSN - TITLE:
MPD TASK:
FSN: 32-40-00-210-801-A - General Visual Inspection of L/G Brake 324000-16
ALL Units

MECH. INSP.

- Set the PARKING BRK control switch (73GG) to the


OFF position.
- Put the WARNING NOTICE(S) in position to tell
persons not to operate the PARKING BRK control
switch (73GG).

SUBTASK 32-40-00-865-050-A
C. Make sure that this (these) circuit breaker(s) is (are) closed:

PANEL DESIGNATION FIN LOCATION


HYDRAULIC/BRAKING
121VU AND STEERING/SYS2/ 4GG M36
SPLY
HYDRAULIC/BRAKING
121VU AND STEERING/SYS2/ 3GG M35
CTL
HYDRAULIC/BRAKING
121VU AND STEERING/SYS1/ 1GG M34
CTL
HYDRAULIC/BRAKING
121VU AND STEERING/SYS1/ 2GG M33
IND AND/SPLY

4. Procedure

** ON A/C FSN 073-074, 076-079, 081-084, 087-089, 091-091, 093-100,


151-200, 226-226, 229-229, 231-233, 235-235, 237-238, 242-250, 301-302,
304-413, 415-415, 500-608, 610-622, 632-650
Ref. Fig. Landing-Gear Brake Units

** ON A/C FSN 414-414, 416-499, 651-700


Ref. Fig. Landing-Gear Brake Units

** ON A/C FSN ALL

JCP Title: General Visual CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 4 of 9


Inspection of L/G Brake Units PRINT DATE: Jul 07/2023
CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
REV DATE: May
JOB CARD
01/2023
AMM - IGO - A318/A319/A320/A321 TASK:
32-40-00-210-801-A
32-40-00-06 CONF 00
Tail Number - MSN - TITLE:
MPD TASK:
FSN: 32-40-00-210-801-A - General Visual Inspection of L/G Brake 324000-16
ALL Units

MECH. INSP.

SUBTASK 32-40-00-210-061-A
A. General Visual Inspection (GVI) of Landing-Gear (L/G) Brake Units
(1) Examine the brake units, as far as you can without removal, for
signs of:
- Leakage
- Missing parts (bolts, fasteners,...)
- Cracks
- Wear
- Structural damage
- Corrosion
- Damaged threads
- Chemical oxidation, caused by the chemicals in dry
powder fire extinguishers and/or runway de-icers. This
can make the outer surface of the pressure plates
looks soft or porous.
- Thermal oxidation, caused by too much heat. This can
make the outer surface of the carbon stators and/or
rotor discs look soft or porous.

(a) If you find missing parts and/or damage, replace the


brake Ref. AMM TASK 32-42-27-000-001 Ref. AMM
TASK 32-42-27-400-001.

(b) If you find signs of leakage, find the source of the


leakage.

1 Do an inspection of the brake with the wheel


installed Ref. AMM TASK 32-42-27-210-001.
- If the leakage comes from the brake,
replace it Ref. AMM TASK
32-42-27-000-001 Ref. AMM TASK
32-42-27-400-001.
- If the leakage does not come from the
brake, find the source of the leakage
and do the necessary repair.

JCP Title: General Visual CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 5 of 9


Inspection of L/G Brake Units PRINT DATE: Jul 07/2023
CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
REV DATE: May
JOB CARD
01/2023
AMM - IGO - A318/A319/A320/A321 TASK:
32-40-00-210-801-A
32-40-00-06 CONF 00
Tail Number - MSN - TITLE:
MPD TASK:
FSN: 32-40-00-210-801-A - General Visual Inspection of L/G Brake 324000-16
ALL Units

MECH. INSP.

5. Close-up

SUBTASK 32-40-00-860-058-A
A. Put the aircraft back to its initial configuration.
(1) De-energize the aircraft electrical circuits
Ref. AMM TASK 24-41-00-862-002.

SUBTASK 32-40-00-941-054-A
B. Removal of the Equipment
(1) Make sure that the work area is clean and clear of tools and
other items.
(2) Remove the ground support and maintenance equipment, the
special and standard tools and all other items.
(3) Remove the WARNING NOTICE(S).

JCP Title: General Visual CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 6 of 9


Inspection of L/G Brake Units PRINT DATE: Jul 07/2023
CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
REV DATE: May
JOB CARD
01/2023
AMM - IGO - A318/A319/A320/A321 TASK:
32-40-00-210-801-A
32-40-00-06 CONF 00
Tail Number - MSN - TITLE:
MPD TASK:
FSN: 32-40-00-210-801-A - General Visual Inspection of L/G Brake 324000-16
ALL Units

MECH. INSP.

A B

Figure 32-40-00-991-00300-00-A (SHEET 1) - Landing-Gear Brake Units

JCP Title: General Visual CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 7 of 9


Inspection of L/G Brake Units PRINT DATE: Jul 07/2023
CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
REV DATE: May
JOB CARD
01/2023
AMM - IGO - A318/A319/A320/A321 TASK:
32-40-00-210-801-A
32-40-00-06 CONF 00
Tail Number - MSN - TITLE:
MPD TASK:
FSN: 32-40-00-210-801-A - General Visual Inspection of L/G Brake 324000-16
ALL Units

MECH. INSP.

** ON A/C FSN 073-074, 076-079, 081-084, 087-089, 091-091, 093-100, 151-200, 226-226,
229-229, 231-233, 235-235, 237-238, 242-250, 301-302, 304-413, 415-415, 500-608,
610-622, 632-650

JCP Title: General Visual CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 8 of 9


Inspection of L/G Brake Units PRINT DATE: Jul 07/2023
CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE
REV DATE: May
JOB CARD
01/2023
AMM - IGO - A318/A319/A320/A321 TASK:
32-40-00-210-801-A
32-40-00-06 CONF 00
Tail Number - MSN - TITLE:
MPD TASK:
FSN: 32-40-00-210-801-A - General Visual Inspection of L/G Brake 324000-16
ALL Units

MECH. INSP.

A B

Figure 32-40-00-991-00300-00-B (SHEET 1) - Landing-Gear Brake Units

** ON A/C FSN 414-414, 416-499, 651-700


© *** END OF CARD ***

JCP Title: General Visual CERTIFICATE OF TASK / INSPECTION COMPLETION: Page 9 of 9


Inspection of L/G Brake Units PRINT DATE: Jul 07/2023
CERTIFIES THAT THE TASK / INSPECTION HAS BEEN
COMPLETED TO THE REQUIRED STANDARD AND SUPPORTS
THE FINAL MAINTENANCE RELEASE / CERTIFICATE OF
RELEASE TO SERVICE

You might also like