Professional Documents
Culture Documents
Technical Databook Section 7 Intro v2 (US)
Technical Databook Section 7 Intro v2 (US)
1.0 Purpose
To acquaint user with Section 7 and it’s intended usage.
2.0 Scope
Applies to field and office personal.
3.0 Definitions
Velocity: distance per unit of time; usually feet/minute or second
Elongation: increase in length due to temperature or “pull”
BHT: bottom hole temperature
WHT: wellhead temperature
Freeboard: distance between the last row of tubing & the outer perimeter of the reel
4.0 Procedure
Work through a sample of examples that relate to calculations required for fieldwork.
A calculator, pen or pencil and work sheet is required.
This material will be used in conjunction with course material for training purposes.
1. Pumping down 2” tubing inside of 3.5”, 9.3 lb/ft tubing at 3 bbl/min, what’s the annular
velocity?
The second will calculate how much the coil tubing length will “expand or grow”
based on BHT vs. WHT.
2. 4000 feet of tubing in a well with a WHT of 55°F and a BHT of 98.6°F, what’s the
elongation?
701162999.doc Page 1 of 2
Page 7-3 is used to determine how many feet of a given diameter coil tubing will fit
onto a reel of given dimensions.
Pages 7-4 through 7-13 provide friction pressure loss charts based on straight tubing
vs. reeled tubing with four types of fluid taken into account.
3. What’s the friction gradient for 2” tubing with a wall thickness of .156”and a rate of 4
bbl/min with 15% HCl
701162999.doc Page 2 of 2