Professional Documents
Culture Documents
C Index
C Index
Chemistry, of Conversions,
Clays ............................................... 4B.1, 16.8 Coring ....................................... 21C.1, 21C.3
Polymers .................................................... 6.1 Copolymerization ....................................... 6.13
Synthetic-base systems ......................... 13.12 Coring ......................................................... 1.14
Testing ....................................................... 3.3 Conversions .............................. 21C.1, 21C.3
Chlorites ...................................................... 4B.6 Fluid types ................................. 21C.1, 21C.3
Testing ............................................ 3.21, 3.59 Corrosion ...................................................... 2.9
Choke, Coupon testing ....................................... 3.48
Plugged .................................................. 18.61 Factors ...................................................... 19.7
Washout ................................................ 18.61 Fundamentals of ..................................... 19.1
Circulate-and-weight, well control .......... 18.41 In completion fluids ........................... 21B.10
Circulation, Measurements .............................. 19.21, 3.48
Loss of, deepwater ................................ 22A.7 Products for controlling .......... 19.16, 21B.13
Mud .........................................................1.12 Ring testing ............................................. 3.48
Circulation time, calculation of ................. 9.16 Testing ............................................ 3.32, 3.48
Classification, of Types of ................................................... 19.3
Matter ...................................................... 4A.1 Corrosion fatigue ........................................ 19.5
Solids size ................................................... 8.3 Covalent bonding ...................................... 4A.9
Clay-water systems, unweighted ............... 10.2 Corrosion ring coupons ........................... 19.21
Clays, Crevice corrosion ........................................ 19.4
Chemistry of .................................. 4B.1, 16.8 Critical velocity ........................................... 5.22
Effect of pH on ...................................... 4B.17 Crosslinked-polymer squeezes ................. 14.22
Types of ................................................... 4B.2 Crystallization temperature ..................... 21B.6
Particle-linking processes ...................... 4B.12 Cuttings-bed ............................................. 20B.2
Clay-water muds, composition of .......... 4B.8 Cuttings concentration (Cconc) ................ 20B.9
Yield of .................................................. 4B.13 Cuttings Transport Ratio (CTR) ............... 20B.9
Cleaning, bottom hole ............................... 5.29
Cleaners, mud ............................................. 8.17 D
Clear brines ................................. 21B.4, 21B.25
Coefficient of friction ................................... 2.7 Damage, formation .................................. 21B.4
Coiled-tubing drilling ....................... 1.9, 22E.1 Dealloying ................................................... 19.5
Equipment for ....................................... 22E.2 Deepwater,
Fluids for ................................................ 22E.8 Drilling in ............................................. 22A.1
Procedures ............................................. 22E.2 Flow line temperature in ...................... 22A.8
Well control in ...................................... 22E.7 Fracture gradients of ............................. 22A.6
Collars, drill .................................................. 1.8 Hole cleaning in ................................... 22A.9
Collection, sample ...................................... 23.3 Logistics of ............................................ 22A.6
Community Right-to-Know law .............. 23.13 Lost circulation in ................................ 22A.7
Complete loss ........................................... 14.18 Pore pressure of .................................... 22A.6
Completion, well ............................. 1.16, 21B.2 Surge in ................................................. 22A.6
Completion and workover fluids ............ 21B.1 Swab in .................................................. 22A.6
Compounds ........................... 4A.2, 4A.5, 4A.11 Well control, methods of ..................... 22A.9
Compressibility, filter cake ........................... 7.6 Defoamers ............................................... 21B.14
Testing ..................................................... 3.11 Deformation ............................................. 22B.5
Compressive failure/collapse .................... 16.15 Degree of Substitution (D.S.) ........................ 6.8
Compressors, for air drilling ................... 21D.8 Degree of Polymerization (D.P.) ................... 6.8
Concentration cell ...................................... 19.4 Degradation, bacterial .............................. 23.10
Concentrations, solutions ........................ 4A.24 Density,
Concentric annulus .................................. 20B.6 Differences .......................................... 20C.10
CONQORT 404 ............................................. 19.16 In workover fluids ................................. 21B.5
Consistometer, Fann Model 5STDL ...... 22C.13 Of intruding fluids ................................ 18.50
Contact time .......................................... 20C.10 Testing .............................................. 3.3, 3.52
Contamination, Deposition, of shale .................................... 16.2
Anhydrite of gypsum, treatment for ..... 4C.2 Desanders ........................................... 8.16, 8.24
Carbonate, treatment for ....................... 4C.7 Desilters .............................................. 8.16, 8.24
Cement, treatment for ........................... 4C.4 Dewatering .................................................. 8.19
Hydrogen sulfide (H2S) ........................ 4C.17 Deviation, wellbore .................... 20C.4, 20C.10
Quick reference ..................................... 4C.18 Diagenesis ................................................... 16.3
Magnesium, treatment for ................... 4C.19 Diatomaceous earth filters ..................... 21B.18
Salt, treatment for ................................ 4C.14 Differentially stuck pipe .................... 15.1, 15.8
Control Of Substances Hazardous Dimerization ............................................. 13.13
to Health (C.O.S.H.H.) .......................... 23.13 Directional drilling ..................................... 1.15
C Index
C Index
C Index
C Index
MY-LO-JELE ................................ 6.3, 7.14, 22B.2 Partical-size analysis, HTHP wells ......... 22C.13
Mysidopsis bahia ............................. 23.4, 23.11 Permeability, of filter cake ............................ 7.7
Permeability plugging apparatus, testing .. 3.43
N Periodic table .................................... 4A.7, 4A.8
Pf alkalinity, testing .................................... 3.17
National Pollutant Discharge Pm alkalinity, testing ................................... 3.17
Elimination System (NPDES) ................ 23.11 Pom alkalinity, testing ................................. 3.59
Naturally Occurring Radioactive pH ........................................ 4A.16, 4A.18, 19.7
Material (NORM) .................................... 23.2 Effect on clays ....................................... 4B.17
Neutral point ................................................ 2.7 Modifiers ............................................. 21B.13
New Source Performance Testing ..................................................... 3.15
Standards (NSPS) ................................... 23.11 Phenolphthalein .................................... 4A2.23
Newtonian fluid ............................................ 5.9 Alkalinity ............................................... 4A.19
Nitrite content testing ................................ 3.28 Testing ............................................ 3.17, 3.59
Nitrogen generators, for air drilling ........ 21D.8 Phosphates ................................................ 4B.19
Non-aqueous emulsions ............................. 11.1 Testing ..................................................... 3.35
Additives .................................................. 11.6 PHPA (Partially Hydrolyzed
Calculations ........................................... 11.32 Polyacrylamide) ............. 6.1, 6.6, 6.15, 22B.2
Controlled activity in ........................... 11.15 Content testing .......................................3.30
Fundamentals of ..................................... 11.3 PIPE-LAXT ......................................... 15.11, 15.13
Properties of ............................................ 11.9 PIPE-LAXT ENV .................................. 15.12, 15.15
Systems .................................................... 11.9 PIPE-LAXT W EXPORT ........................ 15.12, 15.14
Non-dispersed systems ............................... 7.16 Pipe,
Non-Newtonian fluids ................................ 5.11 Drill ............................................................ 1.8
Non-point source pollution ....................... 23.1 Centralization of in displacements ..... 20C.8
Nozzle velocity ............................................ 5.26 Stretch .................................................... 15.23
NOVADRILT .................................................. 21A.8 Movement of in displacements ........... 20C.8
NOVAMODE ................................................. 20A.5 Pit and tank capacity/volumes,
NUT PLUGT .................................................. 14.13 calculation of ............................................. 9.4
NOVAPLUST ......................................... 13.3, 21A.8 Pit closure .................................................. 23.12
NOVATECT .......................................... 13.6, 21A.8 Pitting corrosion ......................................... 19.4
Plastic flow ......................... 22B.5, 16.15, 16.19
O Plastic viscosity .................................... 5.3, 5.13
Testing .............................................. 3.6, 3.54
Plug flow ................................................... 20C.9
Occupational Safety and Health Pollution, identification
Administration (OSHA) ........................ 23.13 Heavy metals ........................................... 23.2
Oil and grease (O&G) test .......................... 23.5 Salt compounds ...................................... 23.2
Oil-base systems, Pollution, sources of
Conventional .......................................... 12.2 Mobile source .......................................... 23.1
For HTHP .............................................. 22C.5 Point source ............................................. 23.1
Mixing of ................................................. 12.2 Non-point source .................................... 23.1
Products ................................................. 12.11 Polyanionic Cellulose
Properties of .......................................... 12.15 (PAC) .............................. 6.7, 6.8, 7.16, 22B.2
Testing ..................................................... 3.52 Polymer,
Troubleshooting .................................... 11.29 Chemistry of ............................................. 6.1
Oil content ........................................ 3.12, 3.58 Classification of ......................................... 6.2
Oil or synthetic ratio (O/W or S/W) ........ 11.16 Effects of pH on ........................................ 6.6
Testing ..................................................... 3.58 Effects of salt ............................................. 6.7
Oil-wetting solids ..................................... 22B.3 Structure of ................................................ 6.1
Olefins ....................................................... 13.13 POLYPACT R ...................................................... 6.9
Organic waste .................................... 23.2, 23.5 POLYPACT UL ............................................... 22B.2
Orientation of stresses .............................. 16.12 POLYPACT SUPREME R ...................................... 7.16
Osmosis ..................................................... 4A.22 POLYPACT SUPREME UL ................................. 22B.2
Overburden pressure ....................... 16.10, 17.1 POLY-PLUST ............................. 6.15, 10.21, 20A.5
Oxygen scavengers ...................... 19.17, 21B.14 Polysaccharides ............................................. 6.2
Testing ..................................................... 3.38 POLY-SALE ............................................ 6.3, 22B.2
Pore pressure .................................... 16.11, 17.2
P In deepwater ......................................... 22A.6
Pore pressure plotting ............................... 17.13
PAC (Polyanionic Potassium chloride brines ...................... 21B.10
Cellulose) ....................... 6.7, 6.8, 7.16, 22B.2 Potassium content testing .......................... 3.26
Packer fluids ....................... 11.26, 12.20, 19.24 Potassium formate .................................. 21B.11
Partial loss ................................................. 14.17
C Index
C Index
C Index
C Index
X
Xanthan gum ........................... 6.2, 6.4, 21B.22
XCD .......................................................... 22B.2
Y
Yield point .................................................... 5.5
Z
Zag Tube .................................................... 20B.2
Zinc bromide .......................................... 21B.12
Zinc content testing ................................... 3.32
Zinc oxide .......................... 19.18, 22B.7, 22B.8