This document provides product information for an AC-DC external power supply manufactured by Delta Electronics for ASUS. The power supply has an input voltage of 100-240V, output of 19V-6.32A for 120.1W, and passed all applicable Ecodesign efficiency requirements as measured at 230V/50Hz, including average active efficiency of 90.1% and no-load power consumption below 0.21W. Test results are in accordance with relevant IEC and EN standards.
This document provides product information for an AC-DC external power supply manufactured by Delta Electronics for ASUS. The power supply has an input voltage of 100-240V, output of 19V-6.32A for 120.1W, and passed all applicable Ecodesign efficiency requirements as measured at 230V/50Hz, including average active efficiency of 90.1% and no-load power consumption below 0.21W. Test results are in accordance with relevant IEC and EN standards.
This document provides product information for an AC-DC external power supply manufactured by Delta Electronics for ASUS. The power supply has an input voltage of 100-240V, output of 19V-6.32A for 120.1W, and passed all applicable Ecodesign efficiency requirements as measured at 230V/50Hz, including average active efficiency of 90.1% and no-load power consumption below 0.21W. Test results are in accordance with relevant IEC and EN standards.
Contact information greenasus@asus.com Internet site http://www.asus.com Address 15, Li-Te Rd., Peitou, Taipei 112, Taiwan Issue date 29-Apr-20
Product Type AC-DC EPS Manufacturer Delta Electronics, Inc.
Model Name ADP-120VH B, D Input Voltage 100-240 V Input AC Frequency 50-60 Hz Nameplate Energy Efficiency 19.0V - 6.32A , 120.1W Level VI Output Level Information Measured Required Result Ecodesign Efficiency at low load 10% 82.75% - PASS Requirements Average Active Efficiency 90.10% 88.0% PASS No-Load Power Consumption (W) 0.12 0.21 PASS Test voltage in V and frequency in Hz 230V, 50Hz Total harmonic distortion of the electricity supply system <2% Nameplate Output: V(Voltage); A(Current); W(Power) The efficiency mark consists of a Roman numeral which printed on the external power supply nameplate, is accordance with International Efficiency Marking Protocol for External Power Supplies Version 3.0, September 2013. The instrumentation, set-up and circuits used for electrical testing are accordance with IEC 62301:2011 and EN50564:2011