You are on page 1of 64

Test Pattern

(1001CJA101622022) )1001CJA101622022)
English

CLASSROOM CONTACT PROGRAMME JEE(Advanced)


REVIEW TEST
(Academic Session : 2022 - 2023) 10-10-2022
JEE(Main+Advanced) : NURTURE COURSE [PHASE : TEPS,TTES,TOPS,TNPS,I(A),I(B),I(C),I,II(A) & LIVE-I(B)]

Time : 3 Hours PAPER-1 Maximum Marks : 180

READ THE INSTRUCTIONS CAREFULLY


GENERAL :
1. This sealed booklet is your Question Paper. Do not break the seal till you are told
to do so.
2. Use the Optical Response sheet (ORS) provided separately for answering the questions.
3. Blank spaces are provided within this booklet for rough work.

DO NOT BREAK THE SEALS WITHOUT BEING INSTRUCTED TO DO SO BY THE INVIGILATOR


4. Write your name, form number and sign in the space provided on the back cover of this
booklet.
5. After breaking the seal of the booklet, verify that the booklet contains 32 pages and
that all the 18 questions in each subject and along with the options are legible. If not,
contact the invigilator for replacement of the booklet.
6. You are allowed to take away the Question Paper at the end of the examination.
OPTICAL RESPONSE SHEET :
7. The ORS will be collected by the invigilator at the end of the examination.
8. Do not tamper with or mutilate the ORS. Do not use the ORS for rough work.
9. Write your name, form number and sign with pen in the space provided for this purpose
on the ORS. Do not write any of these details anywhere else on the ORS. Darken
the appropriate bubble under each digit of your form number.
DARKENING THE BUBBLES ON THE ORS :
10. Use a BLACK BALL POINT PEN to darken the bubbles on the ORS.

11. Darken the bubble COMPLETELY.

12. The correct way of darkening a bubble is as :

13. The ORS is machine-gradable. Ensure that the bubbles are darkened in the correct
way.
14. Darken the bubbles ONLY IF you are sure of the answer. There is NO WAY to erase
or "un-darken" a darkened bubble.
15. Take g = 10 m/s2 unless otherwise stated.
QUESTION PAPER FORMAT :
16. The question paper has three parts : Physics, Chemistry and Mathematics.
Please see the last page of this booklet for rest of the instructions
Target : JEE (Main + Advanced) 2024/10-10-2022/Paper-1
ALLEN
SOME USEFUL CONSTANTS
Atomic No. : H = 1, B = 5, C = 6, N = 7, O = 8, F = 9, Al = 13, P = 15, S = 16,
Cl = 17, Br = 35, Xe = 54, Ce = 58
Atomic masses : H = 1, Li = 7, B = 11, C = 12, N = 14, O = 16, F = 19, Na = 23, Mg = 24,
Al = 27, P = 31, S = 32, Cl = 35.5, Ca=40, Fe = 56, Br = 80, I = 127,
Xe = 131, Ba=137, Ce = 140, Cu = 63.5, Ne = 20, K = 39, Mn = 55

Space for Rough Work

E-2/32 1001CJA101622022
ALLEN Nurture Course/Phase-TEPS, TTES, TOPS, TNPS, I(A), I(B), I(C), I,II(A) & LIVE-I(B)/10-10-2022/Paper-1

BEWARE OF NEGATIVE MARKING

PART-1 : PHYSICS
SECTION-I (i) : (Maximum Marks: 24)
This section contains SIX (06) questions.
Each question has FOUR options. ONE OR MORE THAN ONE of these four option(s) is (are) correct
answer(s).
For each question, choose the option(s) corresponding to (all ) the correct answer(s)
Answer to each question will be evaluated according to the following marking scheme:
Full Marks : +4 If only (all) the correct option(s) is (are) chosen.
Partial Marks : +3 If all the four options are correct but ONLY three options are chosen.
Partial Marks : +2 If three or more options are correct but ONLY two options are chosen and
both of which are correct.
Partial Marks : +1 If two or more options are correct but ONLY one option is chosen and it is a
correct option.
Zero Marks : 0 If none of the options is chosen (i.e. the question is unanswered).
Negative Marks : –2 In all other cases.
For Example : If first, third and fourth are the ONLY three correct options for a question with second
option being an incorrect option; selecting only all the three correct options will result in +4 marks.
Selecting only two of the three correct options (e.g. the first and fourth options), without selecting any
incorrect option (second option in this case), will result in +2 marks. Selecting only one of the three
correct options (either first or third or fourth option), without selecting any incorrect option (second
option in this case), will result in +1 marks. Selecting any incorrect option(s) (second option in this
case), with or without selection of any correct option(s) will result in –2 marks.

1. Select the incorrect alternative(s) :-


(A) Work done by kinetic friction on a body always results in a loss of its kinetic energy.
(B) Work done on a body, in the motion of that body over a close loop is zero for every force in nature.
(C) Total mechanical energy of a system is always conserved no matter what type of internal and
external forces on the body are present.
(D) When total work done by a conservative force on the system is positive then the potential
energy associated with this force decreases.

Space for Rough Work

1001CJA101622022 E-3/32
Target : JEE (Main + Advanced) 2024/10-10-2022/Paper-1
ALLEN
2. A particle is moving in the vertical plane. It is attached at one end of a string of length ℓ whose other end
is fixed. The velocity at the lowest point is u. The tension in the string is T ⃗ and velocity of the particle is
v ⃗ at any position. Then, which of the following quantity will not remain constant ?

(A) T ⃗ . v⃗ (B) kinetic energy


(C) Gravitational potential energy (D) T⃗ × v⃗

3. For a two-body system in absence of external forces, the kinetic energy as measured from ground frame is
KO and from center of mass frame is Kcm. Pick up the correct statement(s) :-
(A) The kinetic energy as measured from center of mass frame is least.
(B) Only the portion of energy Kcm can be transformed from one form to another due to internal
changes in the system.
(C) The system always retains at least KO – Kcm amount of kinetic energy as measured from ground
frame irrespective of any kind of internal changes in the system.
(D) The system always retains at least Kcm amount of kinetic energy as measured from ground
frame irrespective of any kind of internal changes in the system.
4. Mass A hits B inelastically (e = 0) and sticks while moving horizontally with some velocity along the
common line of centres of the three equal masses each of same mass. Initially mass B and C are stationary
and the spring is unstretched. Then which is correct ?

(A) Compression will be maximum when blocks have same velocity.


(B) Velocity of C is maximum when (A + B) is at rest.
(C) Velocity of C is maximum when spring is underformed.
(D) Velocity of C is minimum when spring is underformed.
Space for Rough Work

E-4/32 1001CJA101622022
ALLEN Nurture Course/Phase-TEPS, TTES, TOPS, TNPS, I(A), I(B), I(C), I,II(A) & LIVE-I(B)/10-10-2022/Paper-1
5. A wagon filled with sand has a hole so that sand leaks through the bottom at a constant rate λ. An external
force F ⃗ acts on the wagon in the direction of motion. Assuming instantaneous velocity of the wagon to be v⃗
and initial mass of system to be m0, select the equations which does not described the motion of wagon.
dv ⃗ dv ⃗
(A) F ⃗ = m0 + λv ⃗ (B) F ⃗ = m0 − λv ⃗
dt dt
dv ⃗ dv ⃗
(C) F ⃗ = (m 0 − λt) (D) F ⃗ = (m 0 − λt) + λv ⃗
dt dt
6. Choose the incorrect statement(s) :
(A) Perpendicular axis theorem can be applied for sphere.
(B) Perpendicular axis theorem can be applied for cylinder.
(C) Perpendicular axis theorem can be applied for disc.
(D) Perpendicular axis theorem can be applied for cone.

Space for Rough Work

1001CJA101622022 E-5/32
Target : JEE (Main + Advanced) 2024/10-10-2022/Paper-1
ALLEN
SECTION-I (ii) : (Maximum Marks: 12)
This section contains FOUR (04) questions.
Each question has matching lists. The codes for the lists have choices (A), (B), (C) and (D) out of
which ONLY ONE is correct
For each question, marks will be awarded in one of the following categories :
Full Marks : +3 If ONLY the correct option is chosen.
Zero Marks : 0 If none of the options is chosen (i.e. the question is unanswered)
Negative Marks : –1 In all other cases
7. Consider two spherical masses A and B having same density as shown in figure. Spheres are released
from rest in free space at an initial separation 21 m. The only interaction force acting on two spheres due
to each other is constant in magnitude of 2 N and attractive in nature. Collision is inelastic with
1
coefficient of restitution ( ) . Mass of B is 1 kg. If magnitude of velocities of A, B before and after the
2
collision are v1, v2 and v′1 , v′2 .

List–I List–II
1
(I) v1 (P) m/s
2
(II) v2 (Q) 8 m/s
(III) v′1 (R) 4 m/s
(IV) v′2 (S) 2 m/s
(T) 1 m/s
(A) I → T;II → Q;III → P;IV → R (B) I → R;II → Q;III → S;IV → P
(C) I → T;II → R;III → S;IV → P (D) I → S;II → Q;III → R;IV → T
Space for Rough Work

E-6/32 1001CJA101622022
ALLEN Nurture Course/Phase-TEPS, TTES, TOPS, TNPS, I(A), I(B), I(C), I,II(A) & LIVE-I(B)/10-10-2022/Paper-1
8. List-I contains some continuous mass system and list-II contain their moment of inertia about axis shown in
list-I. Match the following list.
List–I List–II

8M R 2
(I) (P)
11

Uniform rod

MR 2
(II) (Q)
12
Uniform semicircular ring. Axis is perpendicular to
plane of ring.

13M R 2
(III) (R)
8
Uniform Triangular plate of mass M

MR 2
(IV) (S)
6

Uniform disk of initial mass M from which circular


portion of radius R is then removed. M.I. of remaining
mass about axis which is perpendicular to plane of plate.
MR 2
(T)
8

(A) I → P;II → Q;III → R;IV → T (B) I → R;II → Q;III → S;IV → P


(C) I → Q;II → P;III → T;IV → R (D) I → S;II → P;III → T;IV → Q
Space for Rough Work

1001CJA101622022 E-7/32
Target : JEE (Main + Advanced) 2024/10-10-2022/Paper-1
ALLEN
9. A block suspended from a spring is released from rest when spring is unstratched. ‘x’ represents stretch in
spring. Select the appropriate graph taking quantities in List-I as y-axis.

List–I List–II
(I) The KE of block (P) 1
(II) The work done on the block by gravity (Q) 2
(III) The magnitude of work done on the block by spring (R) 3
The total mechanical energy of block-earth-spring
(IV) (S) 4
system
(T) 5
(A) I → R;II → P;III → Q;IV → S (B) I → Q;II → T;III → S;IV → R
(C) I → P;II → Q;III → R;IV → S (D) I → T;II → Q;III → P;IV → R
Space for Rough Work

E-8/32 1001CJA101622022
ALLEN Nurture Course/Phase-TEPS, TTES, TOPS, TNPS, I(A), I(B), I(C), I,II(A) & LIVE-I(B)/10-10-2022/Paper-1
10. In the list-I shown are system of blocks and in list-II are shown ratio of magnitudes of acceleration
aA
( ) . Match the list-I with list-II. Neglect friction every where (mA = 5kg, mB = 10kg)
aB
List–I List–II
1
(I) (P)
2

(II) (Q) 1

3
(III) (R)
4

5
(IV) (S)
3

4
(T)
3

(A) I → Q;II → R;III → T;IV → P (B) I → Q;II → T;III → P;IV → S


(C) I → P;II → R;III → Q;IV → S (D) I → S;II → R;III → T;IV → Q
Space for Rough Work

1001CJA101622022 E-9/32
Target : JEE (Main + Advanced) 2024/10-10-2022/Paper-1
ALLEN
SECTION-II : (Maximum Marks: 24)
This section contains EIGHT (08) questions. The answer to each question is a NUMERICAL VALUE.
For each question, enter the correct numerical value of the answer in the place designated to enter the
answer. If the numerical value has more than two decimal places, truncate/round-off the value to Two
decimal places; e.g. 6.25, 7.00, –0.33, –.30, 30.27, –127.30, if answer is 11.36777..... then both 11.36
and 11.37 will be correct)
Answer to each question will be evaluated according to the following marking scheme:
Full Marks : +3 If ONLY the correct numerical value is entered.
Zero Marks : 0 In all other cases.
1. A block of ice sliding down from the top of the inclined roof of a house (angle of inclination of roof = 30°
with the horizontal). The highest and lowest points of roof are at heights of 8.1 m and 5.6 m respectively
from the ground. At what horizontal distance (in m) from the starting point will the block hit the ground ?
Neglect friction.
2. One end of a rope is fixed to a vertical wall and the other end is pulled by a horizontal force of 20 N.
The shape of the flexible rope is shown in the figure. Find its mass (in kg).

3. Three blocks are connected as shown in the figure. The co-efficient of friction at all surfaces is 0.25. If the
minimum force required to move the body with constant velocity is k mg, then find the value of k.
[Assume that rod does not exert force in vertical direction]

Space for Rough Work

E-10/32 1001CJA101622022
ALLEN Nurture Course/Phase-TEPS, TTES, TOPS, TNPS, I(A), I(B), I(C), I,II(A) & LIVE-I(B)/10-10-2022/Paper-1
4. A particle of mass 'm' moves along the quarter section of the circular path whose centre is at the origin. The
radius of the circular path is 'a'. A force F ⃗ = y^i − x^j newton acts on the particle, where x, y denote the
coordinates of position of the particle. If the work done by this force in taking the particle from point A (a, 0)
to point B(0, a) along the circular path is –ka2 Joules then find the value of k.

5. As shown in the figure a person is pulling a mass 1 kg from ground on a fixed rough hemispherical surface
upto the top of the hemisphere with the help of a light inextensible string. Find the work done (in J) by
tension in the string if radius of hemisphere is 2m and friction coefficient is 0.22. Assume that the block is
pulled with negligible velocity.

6. Two particles P1 and P2 of equal masses situated at (0, 0) and (10, 0) respectively at t = 0 moving with
constant velocities collided head on at point (4, 0) after time t0. If the coefficient of restitution is 1, then
what is the x-coordinate of the centre of mass of the two particles at t = 2t0.
Space for Rough Work

1001CJA101622022 E-11/32
Target : JEE (Main + Advanced) 2024/10-10-2022/Paper-1
ALLEN
7. Two balls having masses m and 2m are fastened to two light strings of same length ℓ. The other ends of
the strings are fixed at O. The strings are kept is same horizontal line and the system is released from rest.
The collision between the balls is elastic. If the difference between their maximum height after collision if
(2a+1)ℓ/9 then find a.
8. A cylindrical solid of mass 10–2 kg and cross-sectional area 10–4 m2 is moving parallel to its axis
(the X-axis) with a uniform speed of 103 m/s in the positive direction. At t = 0, its front face passes
the plane x = 0. The region to the right of this plane is filled with stationary dust particles of uniform
density 10–3 kg/m3. When a dust particle collides with the face of the cylinder, it sticks to its surface.
Assuming that the dimensions of the cylinder remain pratically unchanged, and that the dust sticks
only to the front face of the cylinder, find the x-coordinate (in m) of the cylinder at t = 150 s. If your
answer is in the form of αβ meter then find the value of β.
Space for Rough Work

E-12/32 1001CJA101622022
ALLEN Nurture Course/Phase-TEPS, TTES, TOPS, TNPS, I(A), I(B), I(C), I,II(A) & LIVE-I(B)/10-10-2022/Paper-1
PART-2 : CHEMISTRY
SECTION-I (i) : (Maximum Marks: 24)
This section contains SIX (06) questions.
Each question has FOUR options. ONE OR MORE THAN ONE of these four option(s) is (are) correct
answer(s).
For each question, choose the option(s) corresponding to (all ) the correct answer(s)
Answer to each question will be evaluated according to the following marking scheme:
Full Marks : +4 If only (all) the correct option(s) is (are) chosen.
Partial Marks : +3 If all the four options are correct but ONLY three options are chosen.
Partial Marks : +2 If three or more options are correct but ONLY two options are chosen and
both of which are correct.
Partial Marks : +1 If two or more options are correct but ONLY one option is chosen and it is a
correct option.
Zero Marks : 0 If none of the options is chosen (i.e. the question is unanswered).
Negative Marks : –2 In all other cases.
For Example : If first, third and fourth are the ONLY three correct options for a question with second
option being an incorrect option; selecting only all the three correct options will result in +4 marks.
Selecting only two of the three correct options (e.g. the first and fourth options), without selecting any
incorrect option (second option in this case), will result in +2 marks. Selecting only one of the three
correct options (either first or third or fourth option), without selecting any incorrect option (second
option in this case), will result in +1 marks. Selecting any incorrect option(s) (second option in this
case), with or without selection of any correct option(s) will result in –2 marks.

1. 23 gm of a gas having density 2.03 gm/litre at at STP when undergoes complete combustion gives 44 gm CO2
and 27g H2O. What is/are correct statements regarding the gas -
(A) The gas may be C2H5OH (B) The gas may be CH3–O–CH3
(C) The gas may be C2H6 (D) The gas contains only carbon and hydrogen
2. 2° Alkyls are present in
(A) (B)

(C) (D) CH3–CH2–Br

Space for Rough Work

1001CJA101622022 E-13/32
Target : JEE (Main + Advanced) 2024/10-10-2022/Paper-1
ALLEN
3. If mass of solid residue obtained is 25 gm in each of the following decomposition reaction per 100gm
reactant, which of the following reaction has yield greater than 50% ?
(At. wt. : Na = 23, N = 14, Ca = 40, Pb = 208)
(A) 2NaHCO3 → Na2CO3 ↓ + CO2 ­↑ + H2O ↑ (B) NaNO3 → NaNO2 ↓ + ­1 O 2 ↑
2

(C) Ca(NO3)2 → CaO ↓ + 2NO2 ­+ ­1 O 2 ↑


↑ (D) PbCO3 → PbO ↓ + CO2­↑
2
4. Which of the following statements is/are CORRECT.
(A) SO42– = NO3– = I3– = XeF5– (dipole moment)
(B) pπ-dπ bond is present in both POCl3 and XeO3
(C) MnO is a basic oxide
(D) HClO4 < HClO3 < HClO2 (acidic strength)
5. Select the correct option(s) regarding XeO3F2
(A) Max number of atoms in one plane = 4
(B) Number of planes containing max atoms = 2
(C) Three 2pπ-3dπ bonds
(D) O=Xe=O bond angle is lesser than O=Xe=O bond angle in XeO2F4
6. Correct order of Boling point is/are
(A) H2 < He (B) H2 < D2 (C) H2O < D2O (D) NH3 < SbH3
Space for Rough Work

E-14/32 1001CJA101622022
ALLEN Nurture Course/Phase-TEPS, TTES, TOPS, TNPS, I(A), I(B), I(C), I,II(A) & LIVE-I(B)/10-10-2022/Paper-1
SECTION-I (ii) : (Maximum Marks: 12)
This section contains FOUR (04) questions.
Each question has matching lists. The codes for the lists have choices (A), (B), (C) and (D) out of
which ONLY ONE is correct
For each question, marks will be awarded in one of the following categories :
Full Marks : +3 If ONLY the correct option is chosen.
Zero Marks : 0 If none of the options is chosen (i.e. the question is unanswered)
Negative Marks : –1 In all other cases
7. Answer the following by appropriately matching the lists based on the information given in the paragraph.
List–I List–II
(P) 0.5 mole of SO2(g) (1) Occupy 11.2 L at 1 atm and 273 K
(Q) 1 gm molecule of O2(g) (2) Total no. of atoms = 1.5 × NA
(R) 44 gm of CO2 gas (3) 22NA electrons
(S) 0.5 mole of O3(g) (4) weighs 32 gm
(5) Total no. of protons = 16NA
The CORRECT option is :
(A) P → 1;Q → 2,3,4;R → 4;S → 1 (B) P → 1,2,4;Q → 4,5;R → 3;S → 1,2
(C) P → 2;Q → 1,2,5;R → 4;S → 1 (D) P → 3;Q → 1,2,5;R → 5;S → 1,5
8. List- I List- II
(P) PCl5(g) (1) polar specie
(Q) C6H6 (2) involves d-orbital in hybridisation
(R) SO3 (3) specie has atleast 4 atoms in one plane
(S) SO2Cl2 (4) specie has all equal bond length
(5) non-planar specie
The correct option is
(A) P → 2,3,5;Q → 1;R → 3,4;S → 1,5 (B) P → 1,2,3;Q → 1;R → 3,4;S → 1,5
(C) P → 2,3,5;Q → 3;R → 3,4;S → 1,5 (D) P → 1,2,3;Q → 1,3;R → 1,2;S → 1,5
Space for Rough Work

1001CJA101622022 E-15/32
Target : JEE (Main + Advanced) 2024/10-10-2022/Paper-1
ALLEN
9. List- I List- II
(Compounds) (Properties)
(P) N2O5(s) (1) Cation is polar
(Q) Cl2O6(s) (2) Anion is non polar
(R) PCl5(s) (3) pπ-pπ linkage in cation
(S) I2Cl6(ℓ) (4) pπ-dπ linkage in anion
(5) Both cation and anion are planar
Select the incorrect option :-
(A) P → 2;Q → 2;R → 2;S → 5 (B) P → 3;Q → 4;R → 2;S → 1
(C) P → 1;Q → 3;R → 2;S → 5 (D) P → 5;Q → 1;R → 2;S → 2
10. List-II
List-I
(No. of moles of particular
(Amount of substance)
atoms in the given substance)
(P) 6.022 × 1024 molecules of Al2(SO4)3.3H2O (1) 15 mole O-atoms
(Q) 90 gm C6H12O6 (2) 60 mole H-atoms
(R) 112 litre SO3(g) at 1 atm and 0°C. (3) 3 mole O-atoms
(S) 3.75 mole N2O4(g) (4) 30 mole S-atoms
(5) 150 mole O-atoms

The correct option is


(A) P → 2,4,5;Q → 3;R → 1;S → 1 (B) P → 1;Q → 2,3;R → 1,4;S → 5
(C) P → 4;Q → 3,4;R → 1;S → 1,2 (D) P → 2;Q → 4,5;R → 2,4;S → 3
Space for Rough Work

E-16/32 1001CJA101622022
ALLEN Nurture Course/Phase-TEPS, TTES, TOPS, TNPS, I(A), I(B), I(C), I,II(A) & LIVE-I(B)/10-10-2022/Paper-1
SECTION-II : (Maximum Marks: 24)
This section contains EIGHT (08) questions. The answer to each question is a NUMERICAL VALUE.
For each question, enter the correct numerical value of the answer in the place designated to enter the
answer. If the numerical value has more than two decimal places, truncate/round-off the value to Two
decimal places; e.g. 6.25, 7.00, –0.33, –.30, 30.27, –127.30, if answer is 11.36777..... then both 11.36
and 11.37 will be correct)
Answer to each question will be evaluated according to the following marking scheme:
Full Marks : +3 If ONLY the correct numerical value is entered.
Zero Marks : 0 In all other cases.
1. Pyrolusite is an ore of manganese and it contains 58% by mass MnO2, 15% inert impurities and the rest
is water. When MnO2 is heated it converts to Mn3O4 and oxygen gas is released. A sample of pyrolusite
was heated till constant weight is obtained. Calculate the percentage (by wt) of manganese in the
residue. (At. wt. of Mn = 55)
2. Find the sum of molarity of all the ions present in an aqueous solution of 5M NaNO3 and 3m BaCl2.
The specific gravity of the given solution is 1.665. Assume 100 % dissociation of each salt.
Space for Rough Work

1001CJA101622022 E-17/32
Target : JEE (Main + Advanced) 2024/10-10-2022/Paper-1
ALLEN
3. 2 m solution is formed when 10 gm solute is present in 100 ml solvent. Calculate the molality of solution
which is formed due to dissolution of 25 gm solute in 500 ml solvent.
4. Calculate the density (in gm/ml) of aqueous NaOH solution of which molarity & (w/w%) are equal.

5. DBE of

6. Among the following, total number of planar species is ?


(i) SF4 (ii) BrF3 (iii) XeF2 (iv) IF5 (v) SbF 4 (vi) SF 5
− −
(vii) SeF 3 (viii) CH 3 (ix) P Cl 4
+ + +

Space for Rough Work

E-18/32 1001CJA101622022
ALLEN Nurture Course/Phase-TEPS, TTES, TOPS, TNPS, I(A), I(B), I(C), I,II(A) & LIVE-I(B)/10-10-2022/Paper-1
7. If x = Number of bond angles in PCl5 which are less than angle in regular tetrahedral .
y = Number of equal shorter bond lengths in dichromate ion.
z = Total number of bond angles in P4
Then the value of expression |x + y – z | is :-
8. Which is/are "Pyro" acid :
H2N2O2, H2S2O5, H2S2O7, HClO4, H4P2O5, H4P2O7, H2SO5

Space for Rough Work

1001CJA101622022 E-19/32
Target : JEE (Main + Advanced) 2024/10-10-2022/Paper-1
ALLEN
PART-3 : MATHEMATICS
SECTION-I (i) : (Maximum Marks: 24)
This section contains SIX (06) questions.
Each question has FOUR options. ONE OR MORE THAN ONE of these four option(s) is (are) correct
answer(s).
For each question, choose the option(s) corresponding to (all ) the correct answer(s)
Answer to each question will be evaluated according to the following marking scheme:
Full Marks : +4 If only (all) the correct option(s) is (are) chosen.
Partial Marks : +3 If all the four options are correct but ONLY three options are chosen.
Partial Marks : +2 If three or more options are correct but ONLY two options are chosen and
both of which are correct.
Partial Marks : +1 If two or more options are correct but ONLY one option is chosen and it is a
correct option.
Zero Marks : 0 If none of the options is chosen (i.e. the question is unanswered).
Negative Marks : –2 In all other cases.
For Example : If first, third and fourth are the ONLY three correct options for a question with second
option being an incorrect option; selecting only all the three correct options will result in +4 marks.
Selecting only two of the three correct options (e.g. the first and fourth options), without selecting any
incorrect option (second option in this case), will result in +2 marks. Selecting only one of the three
correct options (either first or third or fourth option), without selecting any incorrect option (second
option in this case), will result in +1 marks. Selecting any incorrect option(s) (second option in this
case), with or without selection of any correct option(s) will result in –2 marks.

1. The equation of the straight line equally inclined to the coordinate axes and equidistant from the points
(2,0) and (0,4) can be-
(A) y = x – 1 (B) y = x + 1 (C) x + y = 3 (D) x + y + 3 = 0
2. Let A(0,3), B(–2,0) and C(6,1) be the vertices of a triangle. If a moving point M(0, β + 1) lies within the ΔABC,
then possible value(s) of β is/are-
7 3 11 1
(A) (B) − (C) − (D)
5 4 20 2
3. If sides AB and AC of a ΔABC are given by equations 3x + y = 4 and x + 3y = 4 respectively and mid
point of BC is (2,2), then which of the following is/are true :-
(A) Equation of BC is x – y = 4 (B) Equation of BC is x + y = 4
(C) Area of ΔABC is 4 (D) Area of ΔABC is 8
Space for Rough Work

E-20/32 1001CJA101622022
ALLEN Nurture Course/Phase-TEPS, TTES, TOPS, TNPS, I(A), I(B), I(C), I,II(A) & LIVE-I(B)/10-10-2022/Paper-1
n−1
∣ n−2 n−6 ∣
4. ∣
If Tn = ∣ 2n − 4 2n − 6

2n − 11 ∣ where n ∈ N, then which of the following is/are true ?
∣ 3n − 9 3n − 12 3n − 18 ∣
n 10
Tn 1
Tn 6n
+
(A) ∏ = (B) ∑ Tn = 60 (C) = 2 (D) T100.T101 = 48
n=1 n=1
Tn

5. Let P and Q be any two points on the lines represented by 2x – 3y = 0 and 2x + 3y = 0 respectively.
If area of triangle OPQ, (O is origin) is 5, then equation of locus of mid point of PQ can be
(A) 4x2 – 9y2 + 30 = 0 (B) 9x2 – 4y2 + 30 = 0
(C) 9x2 – 4y2 – 30 = 0 (D) 4x2 – 9y2 – 30 = 0
6. Let ƒ(x) = ax2 + bx + c; a, b, c ∈ R and equation ƒ(x) = 0 has exactly one solution in interval (m,n), then
ƒ(m).ƒ(n) can be equal to -

(A) sin1cos2 (B) sin2cos1 (C) sin2cos2 (D) sin3cos2

Space for Rough Work

1001CJA101622022 E-21/32
Target : JEE (Main + Advanced) 2024/10-10-2022/Paper-1
ALLEN
SECTION-I (ii) : (Maximum Marks: 12)
This section contains FOUR (04) questions.
Each question has matching lists. The codes for the lists have choices (A), (B), (C) and (D) out of
which ONLY ONE is correct
For each question, marks will be awarded in one of the following categories :
Full Marks : +3 If ONLY the correct option is chosen.
Zero Marks : 0 If none of the options is chosen (i.e. the question is unanswered)
Negative Marks : –1 In all other cases
7. Consider the quadratic equation (a2 – 3a + 2) x2 + (2a3 – a2 – 11a + 10) x + (2a2 + 3a – 5) = 0 then find
the sum of all the value(s) of a (where a ∈ R ) for which the given equation has
List I List II
(I) both roots infinity (P) –7

(II) both roots zero (Q) 2


− 5
(III) exactly one root infinity (R)
2
(IV) both roots are multiplicative inverse of each other (S) ϕ

(T) 0
(A) I → R;II → Q;III → P;IV → S (B) I → Q;II → R;III → P;IV → S
(C) I → Q;II → R;III → S;IV → P (D) I → R;II → Q;III → S;IV → P
Space for Rough Work

E-22/32 1001CJA101622022
ALLEN Nurture Course/Phase-TEPS, TTES, TOPS, TNPS, I(A), I(B), I(C), I,II(A) & LIVE-I(B)/10-10-2022/Paper-1
8. Match List-I with List-II and select the correct answer using the code given below the list.
List-I List-II

Distance between the two lines x + √3y − 2 = 0 and
(I) – (P) 1
x + √3y + 2 = 0 is

The variable line x + λy + λ – 5 = 0 (λ ∈ R) passes through a


(II) (Q) 2
fixed point. The x co-ordinate of fixed point is
The x-coordinates of the point of intersection of lines 3x + 4y
(III) = 9 and y = mx + 1 is an integer, if m is also an integer then (R) 5
sum of possible values of m is
The x-coordinate of incentre of triangle, whose vertices are
(IV) – (S) –3
(1, √ 3) , (0, 0) and (2,0), is

(T) –1

(A) I → Q;II → R;III → P;IV → S (B) I → Q;II → R;III → S;IV → P


(C) I → R;II → Q;III → S;IV → P (D) I → P;II → Q;III → S;IV → R
Space for Rough Work

1001CJA101622022 E-23/32
Target : JEE (Main + Advanced) 2024/10-10-2022/Paper-1
ALLEN
9. Match List-I with List-II and select the correct answer using the code given below the list.
List-I List-II
Number of common integers in two arithmetic progression 1,3,5,7,...157
(I) (P) 0
and 2,5,8,11...161 is
If a and b are roots of 11x2 – 4x – 2 = 0, then value of 10(1 + a + a2 + ...∞)
(II) (Q) 26
(1 + b + b2+ ...∞) is
If the sum of first 20 terms is same as the sum of first 10 terms in an
(III) (R) 22
arithmetic progression then the sum of first 30 terms is
3 5 7 199 a
If sum of + + ....+ is
(IV) 2
1 .2 2 2
2 .3 2 2
3 .4 2 2
99 .100 2 b (S) 20
(where a and b are coprime) the value of 20|b – a| is
(T) 10
(A) I → Q;II → P;III → P;IV → R (B) I → Q;II → R;III → P;IV → S
(C) I → P;II → Q;III → P;IV → Q (D) I → P;II → S;III → R;IV → P

Space for Rough Work

E-24/32 1001CJA101622022
ALLEN Nurture Course/Phase-TEPS, TTES, TOPS, TNPS, I(A), I(B), I(C), I,II(A) & LIVE-I(B)/10-10-2022/Paper-1
10. A triangle ABC is shown in the figure with ∠C = 60°, a = 5 & b = 4.

Match List-I with List-II and select the correct answer using the code given below the list.
List-I List-II

(I) The value of the side opposite to angle ∠C is (P) 5√3

If R is the circumradius of the triangle ABC, the value of


(II) (Q) 7
R2 is
−−
(III) Length of internal angle bisector of C is (R) √ 21
20
(IV) Area of triangle ABC is (S) –
3√3

(T) 3√5

(A) I → R;II → Q;III → S;IV → P (B) I → Q;II → R;III → S;IV → P


(C) I → P;II → Q;III → R;IV → S (D) I → R;II → S;III → P;IV → Q

Space for Rough Work

1001CJA101622022 E-25/32
Target : JEE (Main + Advanced) 2024/10-10-2022/Paper-1
ALLEN
SECTION-II : (Maximum Marks: 24)
This section contains EIGHT (08) questions. The answer to each question is a NUMERICAL VALUE.
For each question, enter the correct numerical value of the answer in the place designated to enter the
answer. If the numerical value has more than two decimal places, truncate/round-off the value to Two
decimal places; e.g. 6.25, 7.00, –0.33, –.30, 30.27, –127.30, if answer is 11.36777..... then both 11.36
and 11.37 will be correct)
Answer to each question will be evaluated according to the following marking scheme:
Full Marks : +3 If ONLY the correct numerical value is entered.
Zero Marks : 0 In all other cases.
1. If 3√–3, –
2√2 sin 2 θ, sinθ, (θ ≠ nπ, n ∈ I) are in geometric progression, then number of values of θ in [–2π, 3π] is

2. A rod of unit length slides along co-ordinate axes such that its two ends A and B always lie on positive X
and Y axes respectively. Then, the locus of centroid of triangle OAB(where O is origin), is given by
k (x 2 + y2 ) = 1; then the value of k is

3. If number of possible triplet (x, y, z), which satisfies the given determinant, where x, y, z ∈ I+
∣ x3 + 1 x 2y x 2z ∣
∣ ∣
∣ 2 3 2 ∣ k
xy y + 1 y z = 11 is 'k' then value of is
∣ ∣ 2
∣ ∣
∣ xz 2 yz 2 z3 + 1 ∣

Space for Rough Work

E-26/32 1001CJA101622022
ALLEN Nurture Course/Phase-TEPS, TTES, TOPS, TNPS, I(A), I(B), I(C), I,II(A) & LIVE-I(B)/10-10-2022/Paper-1
nπ sin θ cos θ
4. Let x and y be positive real numbers and θ an angle such that θ ≠ for any integer n. Suppose =
2 x y
cos4 θ sin 4 θ 97 sin 2θ x y
and + = , then the value of + is
x4 y4 x 3 y + xy3 y x
5. If 2, h1, h2, h3 ... h20, 5 are in H.P., 2, a1, a2, a3 ... a20, 5 are in A.P. and 2, g1, g2, g3 ... g20,5 are in G.P. and
20 log10 L
L = ∏ a i h i gi , then ( ) is equal to

i=1
10

6. If a point P moves such that its distance from line y = √–3x − 7 is same as its distance from (3√–3, 2) , then

√ 3
the area of the curve, described by p, enclosed between the coordinate axes is k (in square units), then
2
the value of k is
Space for Rough Work

1001CJA101622022 E-27/32
Target : JEE (Main + Advanced) 2024/10-10-2022/Paper-1
ALLEN
∣ 1 a3 a2 ∣
∣ ∣

7. Let a2,a3 ∈ R such that |a2 – a3| = 6 and ∣


f (x) = ∣ 1 a3 2a 2 −

x∣,x ∈ R . Then the greatest
∣ ∣
∣ 1 2a 3 − x a2 ∣

value of ƒ(x) is
8. Let the expression E = 8a + 8b – 3.2a+b takes its minimum value 'p' at a = α & b = β, then perpendicular
distance of the point P(α,β) from the line x + y + 2p = 0 is √−

λ , then the value of λ is

Space for Rough Work

E-28/32 1001CJA101622022
ALLEN Nurture Course/Phase-TEPS, TTES, TOPS, TNPS, I(A), I(B), I(C), I,II(A) & LIVE-I(B)/10-10-2022/Paper-1
Space for Rough Work

1001CJA101622022 E-29/32
Target : JEE (Main + Advanced) 2024/10-10-2022/Paper-1
ALLEN
Space for Rough Work

E-30/32 1001CJA101622022
Nurture Course/Phase-TEPS, TTES, TOPS, TNPS, I(A), I(B), I(C), I,II(A) & LIVE-I(B)/10-10-2022/Paper-1
ALLEN
Space for Rough Work

1001CJA101622022 E-31/32
Target : JEE (Main + Advanced) 2024/10-10-2022/Paper-1
ALLEN

NAME OF THE CANDIDATE ................................................................................................

FORM NO. .............................................

I have read all the instructions I have verified the identity, name and Form
number of the candidate, and that question
and shall abide by them.
paper and ORS codes are the same.

____________________________ ____________________________
Signature of the Candidate Signature of the Invigilator

Space for Rough Work

Corporate Office : ALLEN CAREER INSTITUTE Pvt. Ltd., “SANKALP”, CP-6, Indra Vihar, Kota (Rajasthan) INDIA 324005
+91-744-2757575 info@allen.ac.in www.allen.ac.in
E-32/32 Your Hard Work Leads to Strong Foundation 1001CJA101622022
Test Pattern
(1001CJA101622022) )1001CJA101622022)
Hindi

CLASSROOM CONTACT PROGRAMME JEE(Advanced)


REVIEW TEST
(Academic Session : 2022 - 2023) 10-10-2022
JEE(Main+Advanced) : NURTURE COURSE [PHASE : TEPS,TTES,TOPS,TNPS,I(A),I(B),I(C),I,II(A) & LIVE-I(B)]

Time : 3 Hours PAPER-1 Maximum Marks : 180

Ïi;k bu funsZ'kksa dks /;ku ls i<+sa


lkekU; %
1. ;g eksgjcU/k iqfLrdk vkidk iz'ui= gAS bldh eqgj rc rd u rksM+s tc rd bldk funsZ'k u fn;k tk;sA
2. iz'uksa dk mÙkj nsus ds fy, vyx ls nh x;h vkWfIVdy fjLikal 'khV (vks- vkj- ,l-) (ORS) dk mi;ksx djsaA
3. dPps dk;Z ds fy, bl iqfLrdk esa [kkyh LFkku fn;s x;s gaAS
4. bl iqfLrdk ds fiNys i`"B ij fn, x, LFkku esa viuk uke o QkWeZ uEcj fyf[k, ,oa gLrk{kj cukb;sA
5. bl iqfLrdk dh eqgj rksM+us ds ckn Ïi;k tk¡p ysa fd blesa 32 i`"B gaS vkjS izR;sd fo"k; ds lHkh 18 iz'u vkjS muds mÙkj
fodYi Bhd ls i<+s tk ldrs gaSA ;fn ugha] rks iz'ui= dks cnyus ds fy, fujh{kd ls lEidZ djsaA
6. ijh{kkFkhZ iz'ui= dks ijh{kk dh lekIrh ij ys tk ldrs gaAS

fujh{kd ds vuq ns ' kks a ds fcuk eq g js a u rks M + s


vkW f IVdy fjLika l 'khV (vks - vkj-,l-) %
7. vks- vkj- ,l- dks ijh{kk ds lekiu ij fujh{kd ds }kjk ,d= dj fy;k tk,xkA
8. vks- vkj- ,l- esa gsj&Qsj@foÏfr u djsaA vks - vkj-,l- dk dPps dke ds fy, iz ;ks x u djs a A
9. viuk uke vkSj QkWeZ uEcj vks-vkj-,l- esa fn, x, [kkuksa esa dye ls fy[ksa vkSj vius gLrk{kj djsaA buesa ls dksbZ Hkh fooj.k
vks- vkj-,l- es a dgha vkSj u fy[ksa A QkWeZ uEcj ds gj vad ds uhps vuq:i cqycqys dks dkyk djsaA
vks - vkj-,l- ij cqycqyks a dks dkyk djus dh fof/k :
10. vks-vkj-,l- ds cqycqyksa dks dkys ckWy ikWbUV dye ls dkyk djsaA
11. cqycqys dks iw .k± :i ls dkyk djsaA

12. cqycqys dks dkyk djus dk mi;qDr rjhdk gS :

13. vks-vkj-,l- e'khu tk¡P; gAS lqfuf'pr djsa dh cqycqys lgh fof/k ls dkys fd, x;sa gaSA
14. cqycqys dks rHkh dkyk djsa tc vki mÙkj ds ckjs esa fuf'pr gksA dkys fd, gq, cqycqys dks feVkus vFkok lkQ djus dk dksbZ
rjhdk ugha gAS
15. g = 10 m/s2 iz;qDr djsa] tc rd fd vU; dksbZ eku ugha fn;k x;k gksA
iz' ui= dk izk:i %
16. bl iz'ui= esa rhu Hkkx gaS % HkkfS rd foKku] jlk;u foKku ,oa xf.krA

Ïi;k 'ks "k funs Z 'kksa ds fy, bl iq fLrdk ds vfUre i` "B dks i<+ s aA
Target : JEE (Main + Advanced) 2024/10-10-2022/Paper-1
ALLEN
SOME USEFUL CONSTANTS
Atomic No. : H = 1, B = 5, C = 6, N = 7, O = 8, F = 9, Al = 13, P = 15, S = 16,
Cl = 17, Br = 35, Xe = 54, Ce = 58
Atomic masses : H = 1, Li = 7, B = 11, C = 12, N = 14, O = 16, F = 19, Na = 23, Mg = 24,
Al = 27, P = 31, S = 32, Cl = 35.5, Ca=40, Fe = 56, Br = 80, I = 127,
Xe = 131, Ba=137, Ce = 140, Cu = 63.5, Ne = 20, K = 39, Mn = 55

dPps dk;Z ds fy, LFkku

H-2/32 1001CJA101622022
ALLEN Nurture Course/Phase-TEPS, TTES, TOPS, TNPS, I(A), I(B), I(C), I, II(A) & LIVE-I(B)/10-10-2022/Paper-1

BEWARE OF NEGATIVE MARKING

PART-1 : PHYSICS
SECTION-I (i) : (अधिकतम अंक: 24)
इस खंड में छः (06) प्रश्न हैं।
प्रत्येक प्रश्न के सही उत्तर (उत्तरों) के लिए चार विकल्प दिए गए हैं। इस चार विकल्पों में से एक या एक से अधिक विकल्प सही
है(हैं)।
प्रत्येक प्रश्न के लिए, प्रश्न का (के ) उत्तर देने हेतु सही विकल्प (विकल्पों) को चुने।
प्रत्येक प्रश्न के उत्तर का मूल्यांकन निम्न अंकन योजना के अनुसार होगा :
पूर्ण अंक : +4 यदि के वल (सारे) सही विकल्प (विकल्पों) को चुना गया है।
आंशिक अंक : +3 यदि चारों विकल्प सही हैं परन्तु के वल तीन विकल्पों को चुना गया है।
आंशिक अंक : +2 यदि तीन या तीन से अधिक विकल्प सही हैं परन्तु के वल दो विकल्पों को चुना गया है और चुने हुए
दोनों विकल्प सही विकल्प हैं।
आंशिक अंक : +1 यदि दो या दो से अधिक विकल्प सही हैं परन्तु के वल एक विकल्प को चुना गया है और चुना हुआ
विकल्प सही विकल्प हैं।
शून्य अंक : 0 यदि किसी भी विकल्प को नहीं चुना गया है (अर्थात् प्रश्न अनुत्तरित है)।
ऋण अंक : –2 अन्य सभी परिस्थितियों में।
उदाहरण स्वरूप : यदि किसी प्रश्न के लिए के वल पहला, तीसरा एवं चौथा सही विकल्प हैं और दूसरा विकल्प गलत है; तो के वल
सभी तीन सही विकल्पों का चयन करने पर ही +4 अंक मिलेंगें। बिना कोई गलत विकल्प चुने (इस उदाहरण में दूसरा विकल्प)
तीन सही विकल्पों में से सिर्फ दो को चुनने पर (उदाहरणतः पहला तथा चौथा विकल्प) +2 अंक मिलेंगे। बिना कोई गलत विकल्प
चुने (इस उदाहरण में दूसरा विकल्प), तीन सही विकल्पों में से सिर्फ एक को चुनने पर (पहला या तीसरा या चौथा विकल्प) +1
अंक मिलेंगे। कोई भी गलत विकल्प चुनने पर (इस उदाहरण में दूसरा विकल्प), –2 अंक मिलेंगे, चाहे सही विकल्प (विकल्पों) को
चुना गया हो या न चुना गया हो।

1. गलत विकल्प/विकल्पों को चुनिये।


(A) किसी पिण्ड पर गतिज घर्षण द्वारा किये गये कार्य के परिणामस्वरूप उसकी गतिज ऊर्जा में सदैव हानि होती है।
(B) किसी बंद लूप में गतिशील पिण्ड की गति में पिण्ड पर किसी भी प्रकार के बल द्वारा किया गया कार्य शून्य होता है।
(C) किसी निकाय की कु ल यांत्रिक ऊर्जा सदैव संरक्षित ही रहती है, चाहे पिण्ड पर किसी भी प्रकार के आंतरिक या बाह्य
बल कार्यरत हों।
(D) जब किसी निकाय पर संरक्षी बल द्वारा किया गया कु ल कार्य धनात्मक होता है तो इस बल से संबंधित स्थितिज ऊर्जा
घटती है।
रफ कार्य के लिए जगह

1001CJA101622022 H-3/32
Target : JEE (Main + Advanced) 2024/10-10-2022/Paper-1
ALLEN
2. एक कण ऊर्ध्वाधर तल में गति कर रहा है। यह ℓ लम्बाई की रस्सी के एक सिरे से जुड़ा है जिसका दूसरा सिरा स्थिर है। निम्नतम बिन्दु
पर इसका वेग u है। किसी भी स्थिति पर कण का वेग v⃗ है तथा रस्सी में तनाव T ⃗ है। निम्न में से कौनसी राशि नियत नहीं बनी रहेगी ?
(A) T ⃗ . v⃗ (B) गतिज ऊर्जा
(C) गुरूत्वीय स्थितिज ऊर्जा (D) T⃗ × v⃗

3. बाह्य बलों की अनुपस्थिति में एक द्विपिण्ड निकाय के लिये भूतंत्र तथा द्रव्यमान के न्द्र तंत्र से मापी गयी गतिज ऊर्जा क्रमशः KO तथा Kcm है।
सही कथन/कथनों को चुनियेः-
(A) द्रव्यमान के न्द्र तंत्र से मापी गयी गतिज ऊर्जा न्यूनतम है।
(B) निकाय में आंतरिक परिवर्तनों के कारण ऊर्जा का के वल Kcm भाग ही एक रूप से दूसरे रूप में रूपान्तरित हो सकता है।
(C) निकाय में भूतंत्र से मापी गयी गतिज ऊर्जा का न्यूनतम KO – Kcm भाग हमेशा बना रहेगा चाहे निकाय में किसी भी
प्रकार के आंतरिक परिवर्तन हो।
(D) निकाय में भूतंत्र से मापी गयी गतिज ऊर्जा का न्यूनतम Kcm भाग हमेशा बना रहेगा चाहे निकाय में किसी भी प्रकार के
आंतरिक परिवर्तन हो।
4. प्रत्येक समान द्रव्यमान के तीन बराबर द्रव्यमानों के के न्द्रों की उभयनिष्ठ रेखा के अनुदिश किसी वेग से क्षैतिज रूप से गति करते हुए
द्रव्यमान A अप्रत्यास्थ रूप से (e = 0)B से टकराता है तथा इससे चिपक जाता है। प्रारम्भ में द्रव्यमान B व C स्थिर है तथा स्प्रिंग
अतनित है। सही कथन चुनिये।

(A) ब्लाॅकों का वेग समान होने पर संपीडन अधिकतम होगा।


(B) जब (A + B) विराम में होता है तो C का वेग अधिकतम होगा।
(C) स्प्रिंग अविरूपित होने पर C का वेग अधिकतम होता है।
(D) स्प्रिंग अविरूपित होने पर C का वेग न्यूनतम होता है।
रफ कार्य के लिए जगह

H-4/32 1001CJA101622022
ALLEN Nurture Course/Phase-TEPS, TTES, TOPS, TNPS, I(A), I(B), I(C), I, II(A) & LIVE-I(B)/10-10-2022/Paper-1
5. रेत से भरी एक गाड़ी के पैंदे में एक छिद्र बना हुआ है ताकि इससे होकर रेत नियत दर λ से रिसती रहे। गाड़ी पर एक बाह्य बल F ⃗
गति की दिशा में लगता है। माना गाड़ी का तात्क्षणिक वेग v⃗ है तथा निकाय का प्रारम्भिक द्रव्यमान m0 है। कौनसी समीकरण गाड़ी
की गति को नहीं दर्शाती है ?
dv ⃗ dv ⃗
(A) F ⃗ = m0 + λv ⃗ (B) F ⃗ = m0 − λv ⃗
dt dt
dv ⃗ dv ⃗
(C) F ⃗ = (m 0 − λt) (D) F ⃗ = (m 0 − λt) + λv ⃗
dt dt
6. गलत कथन चुनिये :
(A) लम्बवत् अक्ष प्रमेय गोले के लिये प्रयुक्त की जा सकती है।
(B) लम्बवत् अक्ष प्रमेय बेलन के लिये प्रयुक्त की जा सकती है।
(C) लम्बवत् अक्ष प्रमेय चकती के लिये प्रयुक्त की जा सकती है।
(D) लम्बवत् अक्ष प्रमेय शंकु के लिये प्रयुक्त की जा सकती है।
रफ कार्य के लिए जगह

1001CJA101622022 H-5/32
Target : JEE (Main + Advanced) 2024/10-10-2022/Paper-1
ALLEN
SECTION-I (ii) : (अधिकतम अंक: 12)
इस खण्ड में चार (04) प्रश्न हैं
प्रत्येक प्रश्न में सुमेलन सूची है। सूचियों के लिए कोड के विकल्प (A), (B), (C) और (D) हैं जिनमें से के वल एक सही है।
प्रत्येक प्रश्न के लिए अंक निम्नलिखित परिस्थितियों में से किसी एक के अनुसार दिये जाएंगे :
पूर्ण अंक : +3 यदि के वल सही विकल्प को चुना गया है।
शून्य अंक : 0 यदि किसी भी विकल्प को नहीं चुना गया है (अर्थात् प्रश्न अनुत्तरित है)।
ऋण अंक : –1 अन्य सभी परिस्थितियों में।
7. समान घनत्व वाले दो गोलाकार द्रव्यमानों A व B पर विचार कीजिये। इन्हे मुक्त आकाश में चित्रानुसार 21 m की प्रारम्भिक दूरी के
साथ विरामावस्था से छोड़ा जाता है। इन दोनों गोलों पर एक-दूसरे के कारण लगने वाला एक मात्र अन्योन्य बल परिमाण में नियत है
एवं इसका मान 2 N है तथा यह आकर्षी प्रकृ ति का है। होने वाली टक्कर अप्रत्यास्थ होती है तथा प्रत्यावस्थान गुणांक का मान
1
( ) है। B का द्रव्यमान 1 kg हैं। यदि टक्कर से पूर्व तथा बाद में A व B के वेगों के परिमाण क्रमशः v1, v2 तथा v′1 , v′2 हो तो
2

सूची–I सूची–II
1
(I) v1 (P) m/s
2
(II) v2 (Q) 8 m/s
(III) v′1 (R) 4 m/s
(IV) v′2 (S) 2 m/s
(T) 1 m/s
(A) I → T;II → Q;III → P;IV → R (B) I → R;II → Q;III → S;IV → P
(C) I → T;II → R;III → S;IV → P (D) I → S;II → Q;III → R;IV → T

रफ कार्य के लिए जगह

H-6/32 1001CJA101622022
ALLEN Nurture Course/Phase-TEPS, TTES, TOPS, TNPS, I(A), I(B), I(C), I, II(A) & LIVE-I(B)/10-10-2022/Paper-1
8. सूची–I में कु छ सतत् द्रव्यमान निकाय दिये गये है तथा सूची–II में सूची–I में प्रदर्शित अक्ष के सापेक्ष उनके जड़त्व आघूर्ण दिये गये है। सूची
मिलान कीजिये।
सूची–I सूची–II

8M R 2
(I) समरूप छड़ (P)
11

MR 2
(II) (Q)
12

समरूप अर्द्धवृत्ताकार वलय जिसमें अक्ष वलय के तल के लम्बवत् है।

13M R 2
(III) (R)
8

M द्रव्यमान वाली समरूप त्रिभुजाकार प्लेट।

MR 2
(IV) (S)
6

एक समरूप चकती जिसका प्रारम्भिक द्रव्यमान M है, में से चित्रानुसार R


त्रिज्या के एक वृत्ताकार भाग को काट कर बाहर निकाल लिया गया है। इस
शेष द्रव्यमान का इसके तल के लम्बवत् अक्ष के सापेक्ष जड़त्व आघूर्ण होगा।
MR 2
(T)
8

(A) I → P;II → Q;III → R;IV → T (B) I → R;II → Q;III → S;IV → P


(C) I → Q;II → P;III → T;IV → R (D) I → S;II → P;III → T;IV → Q
रफ कार्य के लिए जगह

1001CJA101622022 H-7/32
Target : JEE (Main + Advanced) 2024/10-10-2022/Paper-1
ALLEN
9. स्प्रिंग से लटकाये गये एक ब्लाॅक को विरामावस्था से छोड़ा जाता है जब स्प्रिंग अविस्तारित है। "x" स्प्रिंग में खिंचाव प्रदर्शित करता
है। सूची–I में दी गयी राशियों को y-अक्ष पर लेते हुए उचित वक्र चुनिये।

सूची–I सूची–II
(I) ब्लाॅक की गतिज ऊर्जा (P) 1
(II) गुरूत्व द्वारा ब्लाॅक पर किया गया कार्य (Q) 2
(III) स्प्रिंग द्वारा ब्लाॅक पर किए गये कार्य का परिमाण (R) 3
(IV) ब्लाॅक-पृथ्वी-स्प्रिंग निकाय की कु ल यांत्रिक ऊर्जा (S) 4
(T) 5
(A) I → R;II → P;III → Q;IV → S (B) I → Q;II → T;III → S;IV → R
(C) I → P;II → Q;III → R;IV → S (D) I → T;II → Q;III → P;IV → R

रफ कार्य के लिए जगह

H-8/32 1001CJA101622022
ALLEN Nurture Course/Phase-TEPS, TTES, TOPS, TNPS, I(A), I(B), I(C), I, II(A) & LIVE-I(B)/10-10-2022/Paper-1
10. सूची-I में ब्लाॅकों के निकाय को दर्शाया गया है तथा सूची–II में त्वरण के परिमाणों का अनुपात ( a A ) दिया गया है। सूची-I का
aB
सूची-II से मिलान कीजिये। सर्वत्र घर्षण नगण्य मानिये। (mA = 5kg, mB = 10kg)
सूची–I सूची–II
1
(I) (P)
2

(II) (Q) 1

3
(III) (R)
4

5
(IV) (S)
3

4
(T)
3

(A) I → Q;II → R;III → T;IV → P (B) I → Q;II → T;III → P;IV → S


(C) I → P;II → R;III → Q;IV → S (D) I → S;II → R;III → T;IV → Q
रफ कार्य के लिए जगह

1001CJA101622022 H-9/32
Target : JEE (Main + Advanced) 2024/10-10-2022/Paper-1
ALLEN
SECTION-II : (अधिकतम अंक: 24)
इस खंड में आठ (08) प्रश्न हैं। प्रत्येक प्रश्न का उत्तर एक संख्यात्मक मान (NUMERICAL VALUE) है।
प्रत्येक प्रश्न के उत्तर के सही संख्यात्मक मान (दशमलव अंकन में, दशमलव के द्वितीय स्थान तक रूण्डित/निकटित; उदाहरण
6.25, 7.00, –0.33, –.30, 30.27, –127.30, यदि उत्तर 11.36777..... है, तो 11.36 और 11.37 दोनों सही होगें)
प्रत्येक प्रश्न के उत्तर का मूल्यांकन निम्न अंकन योजना के अनुसार होगा
पूर्ण अंक : +3 यदि सिर्फ सही संख्यात्मक मान (Numerical value) ही उत्तर स्वरूप दर्ज किया गया है।
शून्य अंक : 0 अन्य सभी परिस्थितियों में।
1. किसी मकान की आनत छत (छत का क्षैतिज से आनत कोण = 30°) के शीर्ष से बर्फ का ब्लाॅक नीचे की ओर फिसल रहा है।धरातल
से छत के उच्चतम व निम्नतम बिन्दुओं की ऊँ चाइयाँ क्रमशः 8.1 m व 5.6 m है। प्रारम्भिक बिन्दु से किस क्षैतिज दूरी (m में) पर
ब्लाॅक धरातल से टकरायेगा ? घर्षण नगण्य मानें।
2. किसी रस्सी का एक सिरा एक ऊर्ध्वाधर दीवार पर बंधा हुआ है तथा दूसरे सिरे को 20 N क्षैतिज बल से खींचा जाता है। इस लचीली
रस्सी की आकृ ति चित्र में दर्शायी गयी है। इसका द्रव्यमान (kg में) ज्ञात कीजिये।

3. तीन ब्लाॅकों को चित्रानुसार जोड़ा गया है। सभी सतहों पर घर्षण गुणांक 0.25 है। यदि पिण्ड को नियत वेग से गति कराने के लिये
आवश्यक न्यूनतम बल k mg हो तो k का मान ज्ञात कीजिये। [माना छड़ ऊर्ध्वाधर दिशा में कोई बल नहीं लगाती है।]

रफ कार्य के लिए जगह

H-10/32 1001CJA101622022
ALLEN Nurture Course/Phase-TEPS, TTES, TOPS, TNPS, I(A), I(B), I(C), I, II(A) & LIVE-I(B)/10-10-2022/Paper-1
4. द्रव्यमान 'm' वाला एक कण ऐसे वृत्ताकार पथ के एक चौथाई भाग के अनुदिश गति करता है जिसका के न्द्र मूल बिन्दु पर है। वृत्ताकार
पथ की त्रिज्या a है। एक बल F ⃗ = y^i − x^j न्यूटन कण पर कार्यरत है, जहाँ x, y कण की स्थिति के निर्देशांक को दर्शाते है। यदि
कण को वृत्ताकार पथ के अनुदिश बिन्दु A(a, 0) से बिन्दु B(0, a) तक ले जाने में इस बल द्वारा किया गया कार्य –ka2 जूल हो तो
k का मान ज्ञात कीजिए।

5. प्रदर्शित चित्र में एक व्यक्ति 1 kg द्रव्यमान को धरातल से एक हल्की अवितान्य रस्सी की सहायता से अर्धगोले के शीर्ष तक एक
स्थिर खुरदरी अर्धगोलाकार सतह पर खींच रहा है। यदि अर्धगोले की त्रिज्या 2m व घर्षण गुणांक 0.22 हो तो रस्सी में उत्पन्न तनाव
द्वारा किया गया कार्य (जूल में) ज्ञात कीजिये। माना ब्लाॅक को नगण्य वेग के साथ खींचा जाता है।

6. समान द्रव्यमान वाले दो कण P1 व P2 , t = 0 पर क्रमशः (0, 0) व (10,0) पर स्थित है तथा नियत वेगों से गति करते हुए t0 समय
बाद बिन्दु (4, 0) पर सम्मुख टक्कर करते है। यदि प्रत्यावस्थान गुणांक का मान 1 हो तो t = 2t0 पर दोनों कणों के द्रव्यमान के न्द्र का
x-निर्देशांक क्या होगा ?
रफ कार्य के लिए जगह

1001CJA101622022 H-11/32
Target : JEE (Main + Advanced) 2024/10-10-2022/Paper-1
ALLEN
7. द्रव्यमान m व 2m वाली दो गेंदों को समान लम्बाई ℓ की दो हल्की रस्सियों से बांधा गया है। रस्सियों के दूसरे सिरे O पर स्थिर किये
गये हैं । रस्सियों को समान क्षैतिज रेखा में रखा गया है तथा निकाय को विरामावस्था से छोड़ा जाता है। गेंदों के मध्य प्रत्यास्थ टक्कर
होती है। यदि टक्कर के बाद उनकी अधिकतम ऊँ चाई के मध्य अन्तर (2a+1)ℓ/9 हो तो a का मान होगा :-
8. द्रव्यमान 10–2 kg व अनुप्रस्थ काट क्षेत्रफल 10–4 m2 वाला एक बेलनाकार ठोस इसकी अक्ष के समान्तर (X-अक्ष) धनात्मक
दिशा में 103 m/s की एकसमान चाल से गतिशील है। t = 0 पर इसकी अग्र फलक तल x = 0 से गुजरती है। इस तल के दाँयी ओर
के प्रभाग को एकसमान घनत्व 10–3 kg/m3 वाले स्थिर धूल के कणों से भरा जाता है। जब एक धूल कण बेलन के फलक से टकराता
है तो यह इसकी सतह से चिपक जाता है। माना बेलन की विमायें प्रायोगिक रूप से अपरिवर्तित रहती है तथा धूल बेलन के के वल अग्र
फलक पर ही चिपकती है। t = 150 s पर बेलन का x-निर्देशांक (m में) ज्ञात कीजिये। यदि आपका उत्तर αβ मीटर के रूप में हो तो β
का मान होगा।
रफ कार्य के लिए जगह

H-12/32 1001CJA101622022
ALLEN Nurture Course/Phase-TEPS, TTES, TOPS, TNPS, I(A), I(B), I(C), I, II(A) & LIVE-I(B)/10-10-2022/Paper-1
PART-2 : CHEMISTRY
SECTION-I (i) : (अधिकतम अंक: 24)
इस खंड में छः (06) प्रश्न हैं।
प्रत्येक प्रश्न के सही उत्तर (उत्तरों) के लिए चार विकल्प दिए गए हैं। इस चार विकल्पों में से एक या एक से अधिक विकल्प सही
है(हैं)।
प्रत्येक प्रश्न के लिए, प्रश्न का (के ) उत्तर देने हेतु सही विकल्प (विकल्पों) को चुने।
प्रत्येक प्रश्न के उत्तर का मूल्यांकन निम्न अंकन योजना के अनुसार होगा :
पूर्ण अंक : +4 यदि के वल (सारे) सही विकल्प (विकल्पों) को चुना गया है।
आंशिक अंक : +3 यदि चारों विकल्प सही हैं परन्तु के वल तीन विकल्पों को चुना गया है।
आंशिक अंक : +2 यदि तीन या तीन से अधिक विकल्प सही हैं परन्तु के वल दो विकल्पों को चुना गया है और चुने हुए
दोनों विकल्प सही विकल्प हैं।
आंशिक अंक : +1 यदि दो या दो से अधिक विकल्प सही हैं परन्तु के वल एक विकल्प को चुना गया है और चुना हुआ
विकल्प सही विकल्प हैं।
शून्य अंक : 0 यदि किसी भी विकल्प को नहीं चुना गया है (अर्थात् प्रश्न अनुत्तरित है)।
ऋण अंक : –2 अन्य सभी परिस्थितियों में।
उदाहरण स्वरूप : यदि किसी प्रश्न के लिए के वल पहला, तीसरा एवं चौथा सही विकल्प हैं और दूसरा विकल्प गलत है; तो के वल
सभी तीन सही विकल्पों का चयन करने पर ही +4 अंक मिलेंगें। बिना कोई गलत विकल्प चुने (इस उदाहरण में दूसरा विकल्प)
तीन सही विकल्पों में से सिर्फ दो को चुनने पर (उदाहरणतः पहला तथा चौथा विकल्प) +2 अंक मिलेंगे। बिना कोई गलत विकल्प
चुने (इस उदाहरण में दूसरा विकल्प), तीन सही विकल्पों में से सिर्फ एक को चुनने पर (पहला या तीसरा या चौथा विकल्प) +1
अंक मिलेंगे। कोई भी गलत विकल्प चुनने पर (इस उदाहरण में दूसरा विकल्प), –2 अंक मिलेंगे, चाहे सही विकल्प (विकल्पों) को
चुना गया हो या न चुना गया हो।

1. एक गैस जिसका STP पर घनत्व 2.03 gm/litre है, के 23 gm का पूर्ण दहन किया जाता है तो 44 gm CO2 तथा 27 g H2O
प्राप्त होता है। गैस के संदर्भ में सही कथन है/हैं -
(A) गैस C2H5OH हो सकती है (B) गैस CH3–O–CH3 हो सकती है
(C) गैस C2H6 हो सकती है (D) गैस में के वल कार्बन तथा हाइड्रोजन उपस्थित है
2. निम्न मे से किसमें 2° ऐल्काइल्स उपस्थित है
(A) (B)

(C) (D) CH3–CH2–Br

रफ कार्य के लिए जगह

1001CJA101622022 H-13/32
Target : JEE (Main + Advanced) 2024/10-10-2022/Paper-1
ALLEN
3. यदि निम्न विघटन अभिक्रियाओं में , प्रत्येक में प्रति 100 ग्राम क्रियाकारक 25 ग्राम ठोस अवशेष प्राप्त होता है तो निम्न में से कौन सी
अभिक्रिया में 50% से अधिक लब्धि प्राप्त होगी ?
(परमाणु भार : Na = 23, N = 14, Ca = 40, Pb = 208)
(A) 2NaHCO3 → Na2CO3 ↓ + CO2 ­↑ + H2O ↑ (B) NaNO3 → NaNO2 ↓ + ­1 O 2 ↑
2

(C) Ca(NO3)2 → CaO ↓ + 2NO2 ­+ ­1 O 2 ↑ ↑ (D) PbCO3 → PbO ↓ + CO2­↑


2
4. निम्न में से कौनसे कथन सही है/हैं ?
(A) SO42– = NO3– = I3– = XeF5– (द्विधुव आघूर्ण) (B) POCl3 तथा XeO3 दोनों में pπ-dπ बंध उपस्थित है
(C) MnO एक क्षारीय ऑक्साइड है (D) HClO4 > HClO3 > HClO2 (अम्लीय सामर्थ्य)
5. XeO3F2 के संदर्भ में सही विकल्प चुनिए
(A) एक तल में उपस्थित परमाणुओं की अधिकतम संख्या = 4
(B) ऐसे तलों की संख्या जिनमें अधिकतम परमाणु उपस्थित हैं = 2
(C) तीन 2pπ-3dπ बंध
(D) XeO2F4 में O=Xe=O बंध कोण की तुलना में इसका O=Xe=O बंध कोण कम है
6. क्वथनांक का सही क्रम है/हैं :-
(A) H2 < He (B) H2 < D2 (C) H2O < D2O (D) NH3 < SbH3

रफ कार्य के लिए जगह

H-14/32 1001CJA101622022
ALLEN Nurture Course/Phase-TEPS, TTES, TOPS, TNPS, I(A), I(B), I(C), I, II(A) & LIVE-I(B)/10-10-2022/Paper-1
SECTION-I (ii) : (अधिकतम अंक: 12)
इस खण्ड में चार (04) प्रश्न हैं
प्रत्येक प्रश्न में सुमेलन सूची है। सूचियों के लिए कोड के विकल्प (A), (B), (C) और (D) हैं जिनमें से के वल एक सही है।
प्रत्येक प्रश्न के लिए अंक निम्नलिखित परिस्थितियों में से किसी एक के अनुसार दिये जाएंगे :
पूर्ण अंक : +3 यदि के वल सही विकल्प को चुना गया है।
शून्य अंक : 0 यदि किसी भी विकल्प को नहीं चुना गया है (अर्थात् प्रश्न अनुत्तरित है)।
ऋण अंक : –1 अन्य सभी परिस्थितियों में।
7. अनुच्छेद में दी गयी जानकारी के आधार पर सूचियों का उचित मिलान करके प्रश्न का उत्तर दें।
सूची–I सूची–II
(P) 0.5 मोल SO2(g) (1) 1 atm तथा 273 K पर 11.2 L आयतन घेरती है।
(Q) O2(g) का 1 gm अणु (2) परमाणुओं की कु ल संख्या = 1.5 × NA
(R) 44 gm CO2 गैस (3) 22NA इलेक्ट्रोन
(S) 0.5 मोल O3(g) (4) 32 gm भार
(5) प्रोटोनो की कु ल संख्या = 16NA
सही विकल्प है :
(A) P → 1;Q → 2,3,4;R → 4;S → 1 (B) P → 1,2,4;Q → 4,5;R → 3;S → 1,2
(C) P → 2;Q → 1,2,5;R → 4;S → 1 (D) P → 3;Q → 1,2,5;R → 5;S → 1,5
8. सूची- I सूची- II
(P) PCl5(g) (1) ध्रुवीय स्पीशीज
(Q) C6H6 (2) संकरण में d-कक्षक सम्मिलित है
(R) SO3 (3) स्पीशीज में एक तल में कम से कम चार परमाणु उपस्थित हैं
(S) SO2Cl2 (4) स्पीशीज में सभी बंध लम्बाईयाँ एक समान हैं
(5) असमतलीय स्पीशीज
सही विकल्प है :
(A) P → 2,3,5;Q → 1;R → 3,4;S → 1,5 (B) P → 1,2,3;Q → 1;R → 3,4;S → 1,5
(C) P → 2,3,5;Q → 3;R → 3,4;S → 1,5 (D) P → 1,2,3;Q → 1,3;R → 1,2;S → 1,5
रफ कार्य के लिए जगह

1001CJA101622022 H-15/32
Target : JEE (Main + Advanced) 2024/10-10-2022/Paper-1
ALLEN
9. सूची- I सूची- II
(यौगिक) (गुण)
(P) N2O5(s) (1) धनायन ध्रुवीय है
(Q) Cl2O6(s) (2) ऋणायन अध्रुवीय है
(R) PCl5(s) (3) धनायन में pπ-pπ बंधन
(S) I2Cl6(ℓ) (4) ऋणायन में pπ-dπ बंधन
(5) धनायन तथा ऋणायन दोनों समतलीय हैं
गलत विकल्प चुनिए :-
(A) P → 2;Q → 2;R → 2;S → 5 (B) P → 3;Q → 4;R → 2;S → 1
(C) P → 1;Q → 3;R → 2;S → 5 (D) P → 5;Q → 1;R → 2;S → 2
10. सूची-II
सूची-I
(दिये गये पदार्थ में विशेष परमाणुओं
(पदार्थ की मात्रा)
के मोलों की संख्या)
Al2(SO4)3.3H2O
(P) (1) 15 मोल O-परमाणु
के 6.022 × 1024 अणु
(Q) 90 gm C6H12O6 (2) 60 मोल H-परमाणु
1 atm तथा 0°C पर
(R) (3) 3 मोल O-परमाणु
112 लीटर SO3(g)
(S) 3.75 मोल N2O4(g) (4) 30 मोल S-परमाणु
(5) 150 मोल O-परमाणु
सही विकल्प है :-
(A) P → 2,4,5;Q → 3;R → 1;S → 1 (B) P → 1;Q → 2,3;R → 1,4;S → 5
(C) P → 4;Q → 3,4;R → 1;S → 1,2 (D) P → 2;Q → 4,5;R → 2,4;S → 3
रफ कार्य के लिए जगह

H-16/32 1001CJA101622022
ALLEN Nurture Course/Phase-TEPS, TTES, TOPS, TNPS, I(A), I(B), I(C), I, II(A) & LIVE-I(B)/10-10-2022/Paper-1
SECTION-II : (अधिकतम अंक: 24)
इस खंड में आठ (08) प्रश्न हैं। प्रत्येक प्रश्न का उत्तर एक संख्यात्मक मान (NUMERICAL VALUE) है।
प्रत्येक प्रश्न के उत्तर के सही संख्यात्मक मान (दशमलव अंकन में, दशमलव के द्वितीय स्थान तक रूण्डित/निकटित; उदाहरण
6.25, 7.00, –0.33, –.30, 30.27, –127.30, यदि उत्तर 11.36777..... है, तो 11.36 और 11.37 दोनों सही होगें)
प्रत्येक प्रश्न के उत्तर का मूल्यांकन निम्न अंकन योजना के अनुसार होगा
पूर्ण अंक : +3 यदि सिर्फ सही संख्यात्मक मान (Numerical value) ही उत्तर स्वरूप दर्ज किया गया है।
शून्य अंक : 0 अन्य सभी परिस्थितियों में।
1. पायरोलुसाइट, मैंग्नीज का एक अयस्क है जिसमें द्रव्यमान द्वारा, 58% MnO2, 15% अक्रिय अशुद्धियाँ तथा शेष जल उपस्थित है।
जब MnO2 को गर्म किया जाता है तो यह Mn3O4 में परिवर्तित हो जाता है तथा ऑक्सीजन गैस उत्सर्जित होती है। पायरोलुसाइट के
एक नमूने को स्थिर भार प्राप्त होने तक गर्म किया गया है। अवशेष में मैंग्नीज की प्रतिशतता (भार द्वारा) की गणना कीजिए।
(Mn का परमाणु भार = 55)
2. 5M NaNO3 तथा 3m BaCl2 के एक जलीय विलयन में उपस्थित सभी आयनों की मोलरता का योग बताइये। दिये गये विलयन का
विशिष्ट गुरूत्व 1.665 है। मानें कि प्रत्येक लवण का 100 % वियोजन होता है।
रफ कार्य के लिए जगह

1001CJA101622022 H-17/32
Target : JEE (Main + Advanced) 2024/10-10-2022/Paper-1
ALLEN
3. जब 10 gm विलेय 100 ml विलायक में उपस्थित होता है तो 2m विलयन बनता है ताे उस विलयन की मोललता की गणना
कीजिए जो 25 gm विलेय को 500 ml विलायक में विलेय किये जाने पर बनता है :
4. ऐसे जलीय NaOH विलयन के घनत्व (gm/ml में) की गणना कीजिए जिसकी मोलरता तथा (w/w%) समान हैं
5.
का DBE

6. निम्न में से कितनी स्पीशीज समतलीय हैं?


(i) SF4 (ii) BrF3 (iii) XeF2 (iv) IF5 (v) SbF 4 −
(vi) SF 5

(vii) SeF 3 (viii) CH 3 (ix) P Cl 4
+ + +

रफ कार्य के लिए जगह

H-18/32 1001CJA101622022
ALLEN Nurture Course/Phase-TEPS, TTES, TOPS, TNPS, I(A), I(B), I(C), I, II(A) & LIVE-I(B)/10-10-2022/Paper-1
7. यदि x = PCl5 में ऐसे बंध कोणों की संख्या है जो नियमित चतुष्फलक के कोण की तुलना में कम है
y = डाईक्रोमेट आयन में, समान छोटी बंध लम्बाईयों की संख्या
z = P4 में बंध कोणों की कु ल संख्या है
तो व्यंजक |x + y – z| का मान क्या है।
8. कितने "पायरो" अम्ल है:
H2N2O2, H2S2O5, H2S2O7, HClO4, H4P2O5, H4P2O7, H2SO5
रफ कार्य के लिए जगह

1001CJA101622022 H-19/32
Target : JEE (Main + Advanced) 2024/10-10-2022/Paper-1
ALLEN
PART-3 : MATHEMATICS
SECTION-I (i) : (अधिकतम अंक: 24)
इस खंड में छः (06) प्रश्न हैं।
प्रत्येक प्रश्न के सही उत्तर (उत्तरों) के लिए चार विकल्प दिए गए हैं। इस चार विकल्पों में से एक या एक से अधिक विकल्प सही
है(हैं)।
प्रत्येक प्रश्न के लिए, प्रश्न का (के ) उत्तर देने हेतु सही विकल्प (विकल्पों) को चुने।
प्रत्येक प्रश्न के उत्तर का मूल्यांकन निम्न अंकन योजना के अनुसार होगा :
पूर्ण अंक : +4 यदि के वल (सारे) सही विकल्प (विकल्पों) को चुना गया है।
आंशिक अंक : +3 यदि चारों विकल्प सही हैं परन्तु के वल तीन विकल्पों को चुना गया है।
आंशिक अंक : +2 यदि तीन या तीन से अधिक विकल्प सही हैं परन्तु के वल दो विकल्पों को चुना गया है और चुने हुए
दोनों विकल्प सही विकल्प हैं।
आंशिक अंक : +1 यदि दो या दो से अधिक विकल्प सही हैं परन्तु के वल एक विकल्प को चुना गया है और चुना हुआ
विकल्प सही विकल्प हैं।
शून्य अंक : 0 यदि किसी भी विकल्प को नहीं चुना गया है (अर्थात् प्रश्न अनुत्तरित है)।
ऋण अंक : –2 अन्य सभी परिस्थितियों में।
उदाहरण स्वरूप : यदि किसी प्रश्न के लिए के वल पहला, तीसरा एवं चौथा सही विकल्प हैं और दूसरा विकल्प गलत है; तो के वल
सभी तीन सही विकल्पों का चयन करने पर ही +4 अंक मिलेंगें। बिना कोई गलत विकल्प चुने (इस उदाहरण में दूसरा विकल्प)
तीन सही विकल्पों में से सिर्फ दो को चुनने पर (उदाहरणतः पहला तथा चौथा विकल्प) +2 अंक मिलेंगे। बिना कोई गलत विकल्प
चुने (इस उदाहरण में दूसरा विकल्प), तीन सही विकल्पों में से सिर्फ एक को चुनने पर (पहला या तीसरा या चौथा विकल्प) +1
अंक मिलेंगे। कोई भी गलत विकल्प चुनने पर (इस उदाहरण में दूसरा विकल्प), –2 अंक मिलेंगे, चाहे सही विकल्प (विकल्पों) को
चुना गया हो या न चुना गया हो।

1. सरल रेखा का समीकरण, जो बिन्दु (2,0) तथा (0,4) से समदूरस्थ है तथा निर्देर्शी अक्षों पर समान रूप से झुकी हुई हो,
हो सकता है-
(A) y = x – 1 (B) y = x + 1 (C) x + y = 3 (D) x + y + 3 = 0
2. माना एक त्रिभुज के शीर्ष A(0,3), B(–2,0) तथा C(6,1) है। यदि एक गतिमान बिन्दु M(0, β + 1) त्रिभुज ABC में स्थित हो, तो
b का सम्भव मान होगा/होंगे :-
7 3 11 1
(A) (B) − (C) − (D)
5 4 20 2
3. यदि त्रिभुज ABC की भुजाओं AB तथा AC के समीकरण क्रमशः 3x + y = 4 तथा x + 3y = 4 है तथा BC का मध्य बिन्दु
(2,2) हो, तो निम्न में से कौनसा सत्य होगा/होगें :-
(A) BC का समीकरण x – y = 4 होगा (B) BC का समीकरण x + y = 4 होगा
(C) त्रिभुज ABC का क्षेत्रफल 4 होगा (D) त्रिभुज ABC का क्षेत्रफल 8 होगा

रफ कार्य के लिए जगह

H-20/32 1001CJA101622022
ALLEN Nurture Course/Phase-TEPS, TTES, TOPS, TNPS, I(A), I(B), I(C), I, II(A) & LIVE-I(B)/10-10-2022/Paper-1
∣n−1 n−2 n−6 ∣
4. यदि ∣
Tn = ∣ 2n − 4 2n − 6

2n − 11 ∣ जहाँ n ∈ N हो, तो निम्न में से कौनसा सत्य होगा/होगें ?
∣ 3n − 9 3n − 12 3n − 18 ∣
n 10
Tn 1
Tn 6n
+
(A) ∏ = (B) ∑ Tn = 60 (C) = 2 (D) T100.T101 = 48
n=1 n=1
Tn

5. माना 2x – 3y = 0 तथा 2x + 3y = 0 द्वारा व्यक्त रेखाओं पर कोई दो बिन्दु क्रमशः P तथा Q है। यदि त्रिभुज OPQ (O मूल बिन्दु है)
का क्षेत्रफल 5 हो, तो PQ के मध्य बिन्दु के बिन्दुपथ का समीकरण हो सकता है-
(A) 4x2 – 9y2 + 30 = 0 (B) 9x2 – 4y2 + 30 = 0
(C) 9x2 – 4y2 – 30 = 0 (D) 4x2 – 9y2 – 30 = 0
6. माना ƒ(x) = ax2 + bx + c; a, b, c ∈ R तथा समीकरण ƒ(x) = 0 का ठीक एक हल अन्तराल (m,n) में हो, तो ƒ(m).ƒ(n)
बराबर हो सकता है -
(A) sin1cos2 (B) sin2cos1 (C) sin2cos2 (D) sin3cos2
रफ कार्य के लिए जगह

1001CJA101622022 H-21/32
Target : JEE (Main + Advanced) 2024/10-10-2022/Paper-1
ALLEN
SECTION-I (ii) : (अधिकतम अंक: 12)
इस खण्ड में चार (04) प्रश्न हैं
प्रत्येक प्रश्न में सुमेलन सूची है। सूचियों के लिए कोड के विकल्प (A), (B), (C) और (D) हैं जिनमें से के वल एक सही है।
प्रत्येक प्रश्न के लिए अंक निम्नलिखित परिस्थितियों में से किसी एक के अनुसार दिये जाएंगे :
पूर्ण अंक : +3 यदि के वल सही विकल्प को चुना गया है।
शून्य अंक : 0 यदि किसी भी विकल्प को नहीं चुना गया है (अर्थात् प्रश्न अनुत्तरित है)।
ऋण अंक : –1 अन्य सभी परिस्थितियों में।
7. माना द्विघात समीकरण (a2 – 3a + 2) x2 + (2a3 – a2 – 11a + 10) x + (2a2 + 3a – 5) = 0 हो, तो a के सभी मानों का
योगफल (जहाँ a ∈ R ) जिसके लिए दी गयी समीकरण का/के
सूची-I सूची-II
(I) दोनों मूल अनंत हो (P) –7

(II) दोनों मूल शून्य हो (Q) 2


− 5
(III) ठीक एक मूल अनंत हो (R)
2
(IV) दोनों मूल एक-दुसरे के गुणात्मक प्रतिलोम हो (S) ϕ

(T) 0
(A) I → R;II → Q;III → P;IV → S (B) I → Q;II → R;III → P;IV → S
(C) I → Q;II → R;III → S;IV → P (D) I → R;II → Q;III → S;IV → P
रफ कार्य के लिए जगह

H-22/32 1001CJA101622022
ALLEN Nurture Course/Phase-TEPS, TTES, TOPS, TNPS, I(A), I(B), I(C), I, II(A) & LIVE-I(B)/10-10-2022/Paper-1
8. सूची-I को सूची-II से सुमेलित कीजिए तथा सूचियों के नीचे दिए नए कोड का प्रयोग करके सही उत्तर चुनिये :

सूची-I सूची-II
(I) दो रेखाओं x + √–3y − 2 = 0 तथा x + √–3y + 2 = 0 के मध्य की दूरी होगी। (P) 1
चर रेखा x + λy + λ – 5 = 0 (λ ∈ R) एक नियत बिन्दु से गुजरती है, तो नियत
(II) (Q) 2
बिन्दु का x निर्देशांक होगा
रेखाओं 3x + 4y = 9 तथा y = mx + 1 के प्रतिच्छेद बिन्दु का x-निर्देशांक पूर्णांक
(III) (R) 5
है, यदि m भी पूर्णांक हो, तो m के सम्भव मानों m का योगफल होगा
त्रिभुज के अन्तः के न्द्र का x निर्देशांक, जिनके शीर्ष vertices are (1, √–3) , (0, 0)
(IV) (S) –3
तथा (2,0), है, होगा
(T) –1

(A) I → Q;II → R;III → P;IV → S (B) I → Q;II → R;III → S;IV → P


(C) I → R;II → Q;III → S;IV → P (D) I → P;II → Q;III → S;IV → R
रफ कार्य के लिए जगह

1001CJA101622022 H-23/32
Target : JEE (Main + Advanced) 2024/10-10-2022/Paper-1
ALLEN
9. सूची-I को सूची-II से सुमेलित कीजिए तथा सूचियों के नीचे दिए नए कोड का प्रयोग करके सही उत्तर चुनिये :
सूची-I सूची-II
दो समान्तर श्रेणी 1,3,5,7,...157 and 2,5,8,11...161 के लिये उभयनिष्ठ पूर्णांकों की संख्या
(I) (P) 0
होगी
यदि 11x2 – 4x – 2 = 0, के मूल a तथा b हो, तो 10(1 + a + a2 + ...∞) (1 + b + b2+ ...∞)
(II) (Q) 26
का मान होगा
यदि समान्तर श्रेणी में प्रथम 20 पदों का योगफल, प्रथम 10 पदों के योगफल के समान हो, तो प्रथम
(III) (R) 22
30 पदों का योगफल ---------
3 5 7 199 a
यदि + + ....+ का योगफल
(IV) 2
1 .2 2 2
2 .3 2 2
3 .4 2 2
99 .100 2 b (S) 20
(जहाँ a तथा b सह अभाज्य है) हो, तो 20|b – a| का मान होगा
(T) 10
(A) I → Q;II → P;III → P;IV → R (B) I → Q;II → R;III → P;IV → S
(C) I → P;II → Q;III → P;IV → Q (D) I → P;II → S;III → R;IV → P
रफ कार्य के लिए जगह

H-24/32 1001CJA101622022
ALLEN Nurture Course/Phase-TEPS, TTES, TOPS, TNPS, I(A), I(B), I(C), I, II(A) & LIVE-I(B)/10-10-2022/Paper-1
10. निम्न चित्रानुसार त्रिभुज ABC में, ∠C = 60°, a = 5 तथा b = 4 है।

सूची-I को सूची-II से सुमेलित कीजिए तथा सूचियों के नीचे दिए नए कोड का प्रयोग करके सही उत्तर चुनिये :
सूची-I सूची-II

(I) कोण ∠C की सम्मुख भुजा का मान होगा (P) 5√3

(II) यदि त्रिभुज ABC कि परित्रिज्या R हो, तो R2 का मान होगा (Q) 7


−−
(III) C के अन्तः कोण अर्द्धक की लम्बाई है (R) √ 21
20
(IV) त्रिभुज ABC का क्षेत्रफल हैं (S) –
3√3

(T) 3√5

(A) I → R;II → Q;III → S;IV → P (B) I → Q;II → R;III → S;IV → P


(C) I → P;II → Q;III → R;IV → S (D) I → R;II → S;III → P;IV → Q
रफ कार्य के लिए जगह

1001CJA101622022 H-25/32
Target : JEE (Main + Advanced) 2024/10-10-2022/Paper-1
ALLEN
SECTION-II : (अधिकतम अंक: 24)
इस खंड में आठ (08) प्रश्न हैं। प्रत्येक प्रश्न का उत्तर एक संख्यात्मक मान (NUMERICAL VALUE) है।
प्रत्येक प्रश्न के उत्तर के सही संख्यात्मक मान (दशमलव अंकन में, दशमलव के द्वितीय स्थान तक रूण्डित/निकटित; उदाहरण
6.25, 7.00, –0.33, –.30, 30.27, –127.30, यदि उत्तर 11.36777..... है, तो 11.36 और 11.37 दोनों सही होगें)
प्रत्येक प्रश्न के उत्तर का मूल्यांकन निम्न अंकन योजना के अनुसार होगा
पूर्ण अंक : +3 यदि सिर्फ सही संख्यात्मक मान (Numerical value) ही उत्तर स्वरूप दर्ज किया गया है।
शून्य अंक : 0 अन्य सभी परिस्थितियों में।
1. यदि 3√–3, –
2√2 sin 2 θ, sinθ, (θ ≠ nπ, n ∈ I) गुणोत्तर श्रेढ़ी में है, तो अन्तराल [–2π, 3π] में θ के मानों की संख्या है
2. इकाई लम्बाई की एक छड़ निर्देशी अक्षों के अनुदिश इस प्रकार फिसलती है कि इसके दो सिरे A तथा B हमेशा धनात्मक X तथा Y
अक्षों पर स्थित होते है। तब त्रिभुज OAB(जहाँ O मूलबिन्दु है) के के न्द्रक का बिन्दुपथ k (x 2 + y2 ) = 1 द्वारा दिया जाता है,
तो k का मान है
∣ x3 + 1 x 2y x 2z ∣
∣ ∣
∣ 2 3 2 ∣ k
3. यदि समीकरण ∣ xy y + 1 y z = 11 के धनात्मक पूर्णांक हलों की संख्या 'k' हो, तो का मान होगा
∣ 2
∣ ∣
∣ xz 2 yz 2 z3 + 1 ∣

रफ कार्य के लिए जगह

H-26/32 1001CJA101622022
ALLEN Nurture Course/Phase-TEPS, TTES, TOPS, TNPS, I(A), I(B), I(C), I, II(A) & LIVE-I(B)/10-10-2022/Paper-1
nπ sin θ cos θ
4. माना x तथा y धनात्मक वास्तविक संख्यायें है तथा कोण θ इस प्रकार है कि किसी पूर्णांक n के लिये θ ≠ है। माना =
2 x y
cos4 θ sin 4 θ 97 sin 2θ x y
तथा + = हो, तो + का मान है
x4 y4 x 3 y + xy3 y x
5. यदि 2, h1, h2, h3 ... h20, 5 हरात्मक श्रेणी में , 2, a1, a2, a3 ... a20, 5 समान्तर श्रेणी में तथा 2, g1, g2, g3 ... g20,5 गुणोत्तर
20 log10 L
श्रेणी में तथा L = ∏ a i h i gi , हो, तो ( ) का मान होगा

i=1
10

6. यदि बिन्दु P इस प्रकार गति करता है कि इसकी रेखा y = √–3x − 7 तथा बिन्दु (3√–3, 2) से दूरी समान है, तो P द्वारा बनाए गए

√ 3
वक्र का निर्देशी अक्षों के मध्य क्षेत्रफल k (वर्ग इकाई में) है, तब k का मान होगा -
2

रफ कार्य के लिए जगह

1001CJA101622022 H-27/32
Target : JEE (Main + Advanced) 2024/10-10-2022/Paper-1
ALLEN
∣ 1 a3 a2 ∣
∣ ∣

7. माना a2,a3 ∈ R इस प्रकार है कि |a2 – a3| = 6 तथा ∣


f (x) = ∣ 1 a3 2a 2 −

x∣,x ∈ R है। तब ƒ(x) का
∣ ∣
∣ 1 2a 3 − x a2 ∣

अधिकतम मान होगा


8. माना व्यंजक E = 8a + 8b – 3.2a+b, a = α तथा b = β पर इसके न्यूनतम मान p को ग्रहण करता है, तो रेखा x + y + 2p = 0 से
बिन्दु P(α,β) की लम्बवत् दूरी √−

λ है, तो λ का मान होगा -

रफ कार्य के लिए जगह

H-28/32 1001CJA101622022
ALLEN Nurture Course/Phase-TEPS, TTES, TOPS, TNPS, I(A), I(B), I(C), I, II(A) & LIVE-I(B)/10-10-2022/Paper-1
रफ कार्य के लिए जगह

1001CJA101622022 H-29/32
Target : JEE (Main + Advanced) 2024/10-10-2022/Paper-1
ALLEN
रफ कार्य के लिए जगह

H-30/32 1001CJA101622022
Nurture Course/Phase-TEPS, TTES, TOPS, TNPS, I(A), I(B), I(C), I,II(A) & LIVE-I(B)/10-10-2022/Paper-1
ALLEN
dPps dk;Z ds fy, LFkku

1001CJA101622022 H-31/32
Target : JEE (Main + Advanced) 2024/10-10-2022/Paper-1
ALLEN

ijh{kkFkhZ dk uke ................................................................................................

QkWeZ uEcj .............................................

eSaus lHkh funsZ'kksa dks i<+ fy;k gS vkSj eS mudk eSaus ijh{kkFkhZ dk ifjp;] uke vkSj QkWeZ uEcj dks iwjh
vo'; ikyu d:¡ xk@d:¡ xhA rjg tk¡p fy;k gS ,oa iz' u i= vkSj vks - vkj- ,l- dks M
nksuksa leku gSaA

____________________________ ____________________________
ijh{kkFkhZ ds gLrk{kj fujh{kd ds gLrk{kj

dPps dk;Z ds fy, LFkku

Corporate Office : ALLEN CAREER INSTITUTE Pvt. Ltd., “SANKALP”, CP-6, Indra Vihar, Kota (Rajasthan) INDIA 324005
+91-744-2757575 info@allen.ac.in www.allen.ac.in
H-32/32 Your Hard Work Leads to Strong Foundation 1001CJA101622022

You might also like