Professional Documents
Culture Documents
179602/B
November 2007
Document history
Document number: 179602
Rev. A January 2005 First version.
Converted to XML, updated to new type of power supply and
Rev. B November 2007
minor changes.
Note
The information contained in this document remains the sole property of Kongsberg Maritime AS. No
part of this document may be copied or reproduced in any form or by any means, and the information
contained within it is not to be communicated to a third party, without the prior written consent of
Kongsberg Maritime AS.
Kongsberg Maritime AS endeavours to ensure that all information in this document is correct and fairly
stated, but does not accept liability for any errors or omissions.
Warning
The equipment to which this manual applies must only be used for the purpose for which it was
designed. Improper use or maintenance may cause damage to the equipment and/or injury to personnel.
The user must be familiar with the contents of the appropriate manuals before attempting to operate
or work on the equipment.
Kongsberg Maritime disclaims any responsibility for damage or injury caused by improper installation,
use or maintenance of the equipment.
Comments
To assist us in making improvements to the product and to this manual, we welcome comments and
constructive criticism.
e-mail: km.documentation@kongsberg.com
Kongsberg Maritime AS
P.O.Box 483 Telephone: +47 32 28 50 00
N-3601 Kongsberg, Telefax: +47 32 28 50 10
Norway Service: +47 815 35 355
www.kongsberg.com
Installation Manual
Table of contents
1 INTRODUCTION ................................................................ 5
2 SPECIFICATIONS .............................................................. 5
2.1 SeaSTAR 3510LR Demodulator ..............................................................................5
2.2 Power Supply ...........................................................................................................6
3 INSTALLATION ................................................................. 7
3.1 General information .................................................................................................7
3.1.1 SeaSTAR 3510LR Demodulator .................................................................... 7
3.2 Location of the unit ..................................................................................................7
3.3 Logistics ...................................................................................................................8
3.4 Handling ...................................................................................................................8
3.5 Mechanical installation.............................................................................................8
3.5.1 SeaSTAR 3510LR Demodulator .................................................................... 8
3.5.2 Power Supply ............................................................................................... 8
3.6 Electrical installation ................................................................................................8
3.6.1 SeaSTAR 3510LR Demodulator .................................................................... 8
3.6.2 Interfacing to Std B and M terminals............................................................ 10
4 INSTALLATION DRAWINGS............................................. 10
179602/B 3
Kongsberg SeaSTAR 3510LR Demodulator
4 179602/B
Installation Manual
1 INTRODUCTION
The SeaSTAR 3510LR is an F band receiver used to interface
Inmarsat terminals of standard A, B, F and M type. It is also
used as a demodulator for SeaSTAR spotbeam DGPS corrections
using a compact dome antenna. It is supplied by Fugro.
WARNING
The equipment includes high voltage
(110/230VAC).
Note
The guidelines for installation presented here must be regarded
as a base for detailed plans prepared by the installation shipyard.
These plans must include drawings, instructions and procedures
specific to the ship in which the equipment is to be installed.
These drawings must be approved by the local maritime
classification society.
Note
Unless stated otherwise, all installation work and mounting
equipment described in this document is to be performed
by yard/customer personnel. It is the responsibility of the
yard/customer to assure that their installation personnel are
sufficiently qualified, and that proper caution is taken to avoid
injuries or damage to life, health, environment, equipment and
property.
2 SPECIFICATIONS
2.1 SeaSTAR 3510LR Demodulator
Mechanical specifications
Height (with mounting bracket): 75.75 mm
Height (without mounting 67.50 mm
bracket):
Width (with mounting bracket): 150 mm
Width (without mounting bracket): 112 mm
Depth: 237 mm
179602/B 5
Kongsberg SeaSTAR 3510LR Demodulator
6 179602/B
Installation Manual
Electrical specifications
Input Voltage: 110 to 230V AC
Input Frequency: 47–63 Hz
Output Voltage: 13.2V DC
Output Current: Max. 3A
Batteries None
Environmental specifications
Operating Temperature: –20° to +40°C
Cables
Input Cable Length: 1.6 m
Output Cable Length: 1.7 m
3 INSTALLATION
179602/B 7
Kongsberg SeaSTAR 3510LR Demodulator
3.3 Logistics
Safety: General safety precautions
should be followed when
working in the Mast or
Electronic Equipment.
Personnel qualifications: Trained mechanical workers
(For interfacing to some
INMARSAT terminals
qualifications in electronic
equipment is recommended).
Min. no. of personnel: One.
Ship location: No recommendations,
however access to
INMARSAT correction
signals is recommended for
verification of installation.
Special tools required: None.
3.4 Handling
Equipment contains delicate electronic components – handle
accordingly.
Equipment can be lifted by hand.
8 179602/B
Installation Manual
1 + DC voltage (red)
2 - DC voltage (black)
3 Not connected
179602/B 9
Kongsberg SeaSTAR 3510LR Demodulator
4 INSTALLATION DRAWINGS
The following figures and drawings are included after this page:
Title Fig./ Dwg. No Rev. Sheets
Demodulator 3510LR, System Configuration Figure 1 N/A 1
Demodulator 3510LR, Rear Connectors Figure 2 N/A 1
Pin Layout, Data and Command Port Connector Figure 3 N/A 1
Pin Layout, Switchcraft EN3C3F Female Connector Figure 4 N/A 1
Power Supply Figure 5 N/A 1
Fugro Demodulator, Mounting Bracket Kit 36200-MD-034 0 1
10 179602/B
Installation Manual
179602/B 11
Kongsberg SeaSTAR 3510LR Demodulator
12 179602/B
Installation Manual
Note
The power supply is to be mounted with a yard/customer supplied
U-bracket.
179602/B 13
Kongsberg SeaSTAR 3510LR Demodulator
14 179602/B