Professional Documents
Culture Documents
2
ENEAS
(Efficient Network and Energy Automation Systems)
Solutions for Solutions for Solutions for Solutions for Solutions for
substation distribution monitoring control center life cycle
automation and automation management
protection
Siemens ENEAS solutions manage all aspects of energy automation with efficient project planning,
reliable safety functions, unlimited communication, and compatibility with international standards.
They create a solid foundation for intelligent transmission and distribution networks.
The key to reliable network operation: just a few of them. This is why asset
recognizing faults before they become monitoring and precise analyses become
failures more and more important. Along with
targeted automation they are considered
The world of today is highly dependent
an essential prerequisite to responsible
on a safe and secure supply with electrical
grid management.
power. Over 60,000 high-voltage and
more than 900,000 medium-voltage Siemens ENEAS solutions for monitoring
substations, along with 550,000 fulfill the technical requirements necessary
transformers, 400,000 circuit breakers, to keep a close eye on an entire grid and
and millions of miles of overhead lines all its elements. The advantages are
and cables are in operation around the convincing: blackouts and power quality
globe to bring electricity to the fluctuations can be effectively prevented,
consumers. precise fault localization and analysis can
be performed within a short time, and
However, most of these assets are still
reports that comply with all relevant
controlled by hand or only partially
regulations are generated automatically.
automated. At the same time, there are
Moreover, Siemens ENEAS solutions for
new challenges to be met by utilities and
monitoring pave the way for condition-
network operators. The rise of distributed
oriented maintenance, which further
generation and the growing share of
helps keep life cycle costs low.
renewable energy sources in the world’s
energy balance, aging equipment, and
dramatically changing load situations are
3
How can I get a grip on
network disturbances?
4
Consistent network monitoring Your benefits
and fault reporting with a single
system Inclusion of all available data sources,
also third-party fault recorders, numerical
protection devices, and power quality
devices, for instance
Coherent grouping of all records relating
to a specific network event
Classification of the grouped events
according to their severity
Accurate distance to fault location and
fault analysis
Fast distribution and availability of the
results through e-mail, text message, and
Web interface
Consistent archiving of all relevant data
5
How can I increase the
performance of my assets
in a sustainable manner?
Condition monitoring
Knowledge that translates into advanced over the years, the development
performance and profitability took place for each type of asset on its
own, resulting in a cluttered condition
Expenditure cuts, the loss of expert
monitoring landscape that offers virtually
knowledge due to retirements or staff
no synergy options.
downsizing, and the need for the
operation of aging equipment at higher Siemens has developed Integrated
levels are only some of the challenges Substation Condition Monitoring (ISCM),
utilities and network operators have to a modular platform that is capable of
face today. Yet, they are expected to bundling different types of power
maintain and even increase their levels transmission and distribution monitoring
of performance. systems. Various elements of this
platform are used for the ENEAS solutions
Intelligent grid technologies that help
for monitoring. They make it possible to
establish Smart Grids can provide suitable
use time-tested standard modules in a
answers. Condition monitoring is one of
highly efficient manner and are open to
these technologies, suitable whenever it
customer specific solutions for optimal
comes to optimizing the performance of
integration.
technical equipment. As an important
element of both asset management and ISCM surveys all relevant substation
operation support, it provides network components and includes condition
operators with recommendations based monitoring systems for transformers and
on diagnostics and the analysis of their various components, for partial
measured values. discharge and gas density in gas-
insulated switchgear, for circuit breakers,
While condition monitoring has,
overhead line capacity, cables, and
fortunately, become increasingly more
optionally also for isolators and surge
6
arresters. ISCM can be implemented in monitoring solution. Such a solution
any existing substation. Possible provides complete asset-related condition
configurations comprise everything from information in a common format and
simple asset-embedded value monitors practicable recommendations to the
all the way to a fully integrated condition operator and the asset manager.
Transformer GIS Overhead Line Circuit Breaker Cable Surge Arrester ISCM surveys all
relevant elements of
a grid and can be
implemented in any
given infrastructure.
Tensile
force
Active part SF6 RTU RTU
Ambient SF6
On-load tap Partial temperature
RTU RTU RTU Temperature RTU
changer discharge Ambient
Gas-in-oil Electric temperature Fiberglass
analysis arc sensor
7
The real innovation behind ISCM, Unlike stand-alone condition monitoring
however, is the evaluation of the logged systems for each asset, ISCM is an overall
data with centrally administrated analysis system for all major assets of a
knowledge modules on substation or, substation, making possible the
preferably, control center level. This prediction of the future health state of
paves the way for accurate condition entire networks.
information and enables the operators
Thanks to the common IT platform of all
and asset managers to enhance the
modules, the relevant data is collected,
operating performance of the assets and
analyzed, and presented in a suitable
at the same time reduce costs.
manner through the SCADA system.
Siemens ISCM can be precisely customized Siemens’ user interface provides clear,
and seamlessly integrated into any well-structured displays, the visualization
given substation communication and of values, either numeric or in the form
visualization infrastructure. Rendering of bar graphs, curves, and charts, logging
all condition information in a consistent of reports, convenient query functions
format, the system is a major contribution on reports, and even the visualization of
to the optimal utilization of all resources external information.
within a network.
8
Maximized investment
utilization with targeted Your benefits
solutions
Reduced life cycle cost thanks to
optimized maintenance
Extended component life through
consistent prevention of overstressing
Optimized performance through loading
above “book” rating
Avoidance of downtimes and the need
for emergency maintenance
Possibility for consistent preventive
maintenance
Reduction of material costs and incidental
expenses
9
How can I make power
anomalies a thing of the past?
The need for clean power surges, and transients. Many operations
are very sensitive to even very short
Reliability is only one side of the equation
interruptions and anomalies, as these can
in electrical power supply. The other, and
cause outages, production losses, and
the one that is gaining in importance at
high follow-up costs. Examples are
the moment, is quality. Assuring the
continuous process operations, where
quality of delivered power at the point
short interruptions can disrupt the
of use is no easy task. Even worse, there
synchronization of the machinery and
is no way that electricity which does not
result in large volumes of semi-processed
fulfill certain quality criteria can be
product and multistage batch operations,
withdrawn from the supply chain or
where an interruption during one process
rejected by the customer.
can destroy the value of previous
But while more and more everyday operations.
operations have quite critical power
This is why power quality is an issue for
supply requirements, the number of
both network operators and power
factors that can create power quality
producers as well as for customers such
problems is also rising. Today’s
as industrial plants, and power quality is
widespread use of power electronics is
an integral part of many power supply
just one example.
contracts nowadays.
Customers are increasingly aware of
power anomalies such as harmonic
distortion, under and overvoltage, dips,
10
Consistent power quality
management with a Your benefits
comprehensive system
Comprehensive solution for all power
quality and reliability issues
Generation of fully compliant reports
Automatic notifications via email, text
message, fax, and printer in the case of a
fault
All it takes to be on the safe side The levels of power quality solutions
ENEAS solutions for power quality comprise
a range of quality measurement and
Publishing
of results
analysis systems that enable the network SIMEAS SAFIR
are the basis for continuous data collection. SICAM PQS SIMEAS SAFIR
At multiple points within the network, (server/client) (server/client)
11
Published by and copyright © 2010:
Siemens AG
Energy Sector
Freyeslebenstrasse 1
91058 Erlangen, Germany
Siemens AG
Energy Sector
Power Distribution Division
Energy Automation
Humboldtstrasse 59
90459 Nuremberg, Germany
www.siemens.com/energy