Professional Documents
Culture Documents
HcMonitor2 0-Revision1
HcMonitor2 0-Revision1
CHC® HcMonitor2.0
USER GUIDE
Document Version:B/0
Changing
Events Content Changes and Instructions Editor Valid Date
Order No.
Page
1 2 3 4 5 6 7 8 9 10 11 12 13
Order
Version
B/0 B/0 B/0 B/0 B/0 B/0 B/0 B/0 B/0 B/0 B/0 B/0 B/0
No.
Page 21 22 23 24 25 26
14 15 16 17 18 19 20
Order
Version
B/0 B/0 B/0 B/0 B/0 B/0 B/0 B/0 B/0 B/0 B/0 B/0 B/0
No.
Page
27 28 29 30 31 32 33 34 35 36 37 38 39
Order
Version
B/0 B/0 B/0 B/0 B/0 B/0 B/0 B/0 B/0 B/0 B/0 B/0 B/0
No.
Page
40 41 42 43 44 45 46 47 48 49 50 51 52
Order
Version B/0 B/0 B/0 B/0 B/0 B/0 B/0 B/0 B/0 B/0 B/0 B/0 B/0
HcMonitor 2.0 No. CHC-YHSC-001-2016
CHC Navigation
User Guide Version:B/0
No.
Page
53 54 55 56 57 58 59 60 61 62 63 64 65
Order
Version
B/0 B/0 B/0 B/0 B/0 B/0 B/0 B/0 B/0 B/0 B/0 B/0 B/0
No.
Page
Order
Version
No.
Page
Order
Version
No.
7
No. CHC-YHSC-010-2016
HcMonitor2.0
CHC Navigation
User Guide Version:B/0
CONTENTS
Preface ..................................................................................................................................................... 1
About the User Guide……………………………………………………………………………………………1
About HcMonitor 2.0……………………………………………………………………………………………1
Disclaimer……………………………………………………………………………………………………..…1
CHC International Technical Survice……………………………………………………………………………1
Your Comments………………………………………………………………………………………………….1
1 Documentation Purposes ....................................................................................................................... 2
2 Audience ............................................................................................................................................. 2
3 Software Requirement ........................................................................................................................... 2
4 Server Requirement .............................................................................................................................. 2
5 Install and Uninstall……………………………………………………………………………………………….3
6 HSA ................................................................................................................................................... 7
7 Index .................................................................................................................................................. 8
8 Help.................................................................................................................................................... 9
8.1 Register ..................................................................................................................................... 9
8.2 About .......................................................................................................................................11
9 Toolbar Controls ............................................................................................................................... 12
10 Project Management……………………………………………………………………………………………13
10.1 Build New Project ................................................................................................................... 13
10.2 Uninstall Project ..................................................................................................................... 14
10.3 Load Project ........................................................................................................................... 15
10.4 Project Property ...................................................................................................................... 15
10.5 Delete Project ......................................................................................................................... 16
10.6 Exit ....................................................................................................................................... 17
11 Station Management.......................................................................................................................... 18
11.1 Add Station ............................................................................................................................ 18
11.2 Connect Network .................................................................................................................... 20
11.3 Coordinate File ....................................................................................................................... 21
11.4 Station Module Management .................................................................................................... 23
11.4.1 Batch Add Station Module .............................................................................................. 23
11.4.2 Batch Delete Station Module ........................................................................................... 27
11.4.3 Module Property.......................................................................................................... 28
11.4.4 Run Module .................................................................................................................. 31
11.4.5 Stop module.................................................................................................................. 32
11.4.6 Reset............................................................................................................................ 32
11.5 Properties ............................................................................................................................... 33
11.6 Single Station Position (SSP) .................................................................................................... 36
11.7 Station Layout ........................................................................................................................ 38
11.8 Receiver Information ............................................................................................................... 39
11.9 Delete....................................................................................................................................... 41
12 GNSS Processor Management ............................................................................................................ 42
HcMonitor2.0 No. CHC-YHSC-001-2016
CHC Navigation
User Guide Version:B/0
12.1 Add Engine ............................................................................................................................ 42
12.2 Run Engine ............................................................................................................................ 46
12.3 Stop Engine ............................................................................................................................ 46
12.4 Property................................................................................................................................. 47
12.5 Delete Engine ......................................................................................................................... 52
13 Broadcast Ephemeris…………………………………………………………………………………...………52
14 Precise Ephemeris............................................................................................................................. 54
15 System Monitor ................................................................................................................................ 55
15.1 Overload Status....................................................................................................................... 56
15.2 Net Status............................................................................................................................... 56
15.3 Disk Status ............................................................................................................................. 57
16 Tool........................................................................................................................................ 57
17 View ...................................................................................................................................... 60
18 Report .................................................................................................................................... 61
No. CHC-YHSC-010-2016
HcMonitor2.0
CHC Navigation
User Guide Version:B/0
PREFACE
Disclaimer
Before using the product, please make sure you have read and understand this User Guide, to
better use this product. CHC holds no responsibility for the wrong operation by users and for the
losses incurred by the wrong understanding about the User Guide. However, Since CHC is devoted
to keep improving functions and performance, and to enhance service quality, CHC reserves the
rights to update, optimize, and inform the contents in this guide regularly. Please follow the latest
information from CHC website (www.chcnav.com).
Your Comments
Your feedback about this user guide will help us to improve it in future reversion. Please leave
your advice by visiting CHC website, select “Technical Support”-->”Comments and Complaints”
forum.
1
HcMonitor2.0 No. CHC-YHSC-001-2016
CHC Navigation
User Guide Version:B/0
1 Documentation Purposes
This documentation describes the operating details of HcMonitor2.0, to guide its users and
operators.
2 Audience
3 Software Requirement
4 Server Requirement
Server Configuration:
Processor:Intel(R) Xeon(R) CPU E5-2640 0 @2.50GHz 2.50 GHz (2 processor)
Installing Memory:12.0 GB
System Type:64bit Operating System
Hard Drive Capacity:500G
2
HcMonitor2.0 No. CHC-YHSC-001-2016
CHC Navigation
User Guide Version:B/0
5.1 Install
Extract the installation package to local disk, then click [Setup.exe] button to set up the software.
Details as follows:
Check [Do you agree to accept the terms and conditions?], and then click [Next].
[Installation path] window will pop up. Please check both [Create Desktop] and [Create Start
Menu Shortcuts], then click [Next]. Details as follows:
3
HcMonitor2.0 No. CHC-YHSC-001-2016
CHC Navigation
User Guide Version:B/0
Select appropriate Server Type, and configure related IP address and Ports, then click [Next]:
4
HcMonitor2.0 No. CHC-YHSC-001-2016
CHC Navigation
User Guide Version:B/0
5
HcMonitor2.0 No. CHC-YHSC-001-2016
CHC Navigation
User Guide Version:B/0
Figure above shows that you‟ve successfully installed HcMonitor2.0, then click [Finish].
Shortcut of HcMonitor2.0 will automatically display on both desktop and start menu.
Click the shortcut to run the software.
The shortcut in start menu is under the HuaceNav catalogue, which is called [HcMonitor2.0].
5.2 Uninstall
Click the [Uninstall] shortcut can uninstall the [HcMonitor2.0] software in start menu. Details
as follows:
6
HcMonitor2.0 No. CHC-YHSC-001-2016
CHC Navigation
User Guide Version:B/0
6 HSA
HSA module is used for backstage service control software. Click [HSA] button under
7
HcMonitor2.0 No. CHC-YHSC-001-2016
CHC Navigation
User Guide Version:B/0
[HuaceNav] Folder in start menu to open the software. Then you can control the backstage service
7 Index
Run shortcut to enter Home page.
Specific interface is shown as follows:
8
HcMonitor2.0 No. CHC-YHSC-001-2016
CHC Navigation
User Guide Version:B/0
As shown above: the current registration status, database(db) connection status, and main
server connection status will display at the lower left corner of the index. Details as follows:
8 Help
Help module is mainly used to register and check software information, including two parts --
Register and About. HELP drop-down menu can be called via shortcut key Alt+H.
8.1 Register
This part is mainly used for registration. After installing and entering the index, the HcMonitor
will prompt: Register code is out of date. This informs that you need to register the software first.
Details as shown below:
9
HcMonitor2.0 No. CHC-YHSC-001-2016
CHC Navigation
User Guide Version:B/0
Find [Help] in menu bar, then click [Register] button to pop up registration interface or press
shortcut: Alt+R.
Type related register code, then click [Register] to finish. Details as follows:
*NOTE1: Either Machine code or Dongle works. Please contact CHC technicians to gain the
related Register Code.
*NOTE2: “Ctrl+V” doesn‟t work when you want to paste the Register Code into the blank. Please
10
HcMonitor2.0 No. CHC-YHSC-001-2016
CHC Navigation
User Guide Version:B/0
8.2 About
This part is mainly used to inspect the software information.
Find [Help] under menu bar [About], or press shortcut: Alt+I, to call software information.
At present, Software Information interface will automatically pop-up like follows:
11
HcMonitor2.0 No. CHC-YHSC-001-2016
CHC Navigation
User Guide Version:B/0
9 Toolbar Controls
These modules are mainly shortcut controls to operate the system more conveniently, which
mainly include Add Station, Delete Station, Connect Network, Run All Engine, Stop All Engine,
Default, Translation, Zoom in, Frame Selection, Zoom out, and Full View.
Add Station: Shortcut button is shown as . Specific reference to 11.1 Add Station
Delete Station: Shortcut button is shown as . Specific reference to 11.2 Delete Station
Run All Engine: Shortcut button is shown as . Specific reference to 12.2 Run All Engine
Stop All Engine: Shortcut button is shown as . Specific reference to 12.3 Stop All Engine
*NOTES: Shortcut controls, such as default, translation, zoom in, frame selection, zoom out, and
full view, will be commonly used in station layout.
Default: When mouse arrow is in station layout, it will automatically change the icons; while in
other positions, it will change to be default mouse arrow again.
Translation: To translate the information in station layout, click [translation] button in Toolbar as
first, then move your mouse arrow into station layout, and continuously press left mouse.
Frame Selection: To enlarge the content for a particular zone, click [frame selection] in Toolbar as
first, then move mouse arrow to the zone in station layout where you are interests. Press left
button continuously and box that specific zone.
Zoom out: To shrink the station layout, click [zoom out] button in Toolbar as first,then move
Full View: To overview the entire station layout, chick [Full View] button in Toolbar as .
12
HcMonitor2.0 No. CHC-YHSC-001-2016
CHC Navigation
User Guide Version:B/0
10 Project Management
This module is mainly used to manage system projects, which includes build new projects, load
projects, uninstall projects, delete projects, project properties, and exit. Press shortcut Alt+P, to
directly call [Project Management] drop-down menu.
Details as follows:
13
HcMonitor2.0 No. CHC-YHSC-001-2016
CHC Navigation
User Guide Version:B/0
*NOTES: please make sure you run the backstage service control software, which refers
specifically to [6 HSA].
As shown above, after configuring each parameter, click [OK] to finish building a new project.
The current project name will be displayed on the upper left corner of the index. Details as
follows: .
14
HcMonitor2.0 No. CHC-YHSC-001-2016
CHC Navigation
User Guide Version:B/0
Select the project you want to load, click [open]. Current project name will be displayed at the
Select [Project Name] in drop-own menu, to examine properties of each existing projects.
Or press shortcut key: Alt+D, to delete current existing project. Details as follows:
16
HcMonitor2.0 No. CHC-YHSC-001-2016
CHC Navigation
User Guide Version:B/0
Select the project you want to delete, then click [delete], or click [cancel] to exit current
window.
*NOTE: You have to uninstall the project you want to delete at first, in order to delete the
10.6 Exit
Click [Project Management] [Exit]:
17
HcMonitor2.0 No. CHC-YHSC-001-2016
CHC Navigation
User Guide Version:B/0
11 Station Management
This module is mainly used to manage stations of HcMonitor2.0 System, including add station,
connect network, station status management, property, single station position, station layout, receiver
information, and delete.
Press shortcut key: Alt+S, to call the drop-down menu of [Station Management].
You can also highlight and right click [Station] in tree structure menu, and click [Add Station].
Details as follows:
Type Station ID, Name, and highlight server IP, you need to add. Then click [OK]. [Add
Station] information window will pop up automatically for editing. Details as follows:
18
HcMonitor2.0 No. CHC-YHSC-001-2016
CHC Navigation
User Guide Version:B/0
19
HcMonitor2.0 No. CHC-YHSC-001-2016
CHC Navigation
User Guide Version:B/0
After configuring related parameters as shown above, click [OK], then you will successfully
follows:
Green indicates that current station is normal; Yellow indicates that current station is abnormal.
*NOTE2: Stations, having been added, are both visible by main server and sub-server. However,
the real operation of station is under the server that you choose previously.
[Break] button helps to interrupt the connection; [Exit] button helps to leave the [Connect
Network] window.
Details as follows:
20
HcMonitor2.0 No. CHC-YHSC-001-2016
CHC Navigation
User Guide Version:B/0
*NOTES: [Check All] box can help you select all networks at once.
Above tow operations are both used for batch connecting network in [Connect Network]
window.
We can also link single station. Highlight and right click one existing station appears under
[Station] in tree structure menu, then click [Run Station] to connect network one-by-one.
After choosing the right path, click [OK] to export the coordinate file of stations.
22
HcMonitor2.0 No. CHC-YHSC-001-2016
CHC Navigation
User Guide Version:B/0
23
HcMonitor2.0 No. CHC-YHSC-001-2016
CHC Navigation
User Guide Version:B/0
Select all stations that need to add data storage modules, then click button,
*NOTES: Remember to mark [Check All] box under [Selected Station] at lower right corner as
well.
24
HcMonitor2.0 No. CHC-YHSC-001-2016
CHC Navigation
User Guide Version:B/0
Click [OK] to enter configuration model of data storage parameters. Details as follows:
After configuring related parameters, click [OK] to finish the addition of data storage module, or
click [cancel] to abandon the operation.
25
HcMonitor2.0 No. CHC-YHSC-001-2016
CHC Navigation
User Guide Version:B/0
Operation to add [Quality Check] module is the same as [Data Storage] module. Highlight
[Quality Check], and click [OK]. Then [Select Station] window will pop up. Details as follows:
Select stations that need to be added for [Quality Check] module, click [OK] to launch
configuration interface of Quality Check parameters.
26
HcMonitor2.0 No. CHC-YHSC-001-2016
CHC Navigation
User Guide Version:B/0
After configuring all parameters, click [OK] to finish the editing for [Quality Check] module.
28
HcMonitor2.0 No. CHC-YHSC-001-2016
CHC Navigation
User Guide Version:B/0
The operation works the same so as to check the property of [Data QC] module. Right click
[Station Property], or directly left click the [Data QC] module you want to examine. Details as
follows:
29
HcMonitor2.0 No. CHC-YHSC-001-2016
CHC Navigation
User Guide Version:B/0
Quality Check
30
HcMonitor2.0 No. CHC-YHSC-001-2016
CHC Navigation
User Guide Version:B/0
Multi-Path Graph
There will be two conditions to run module. One is in a state of not running. At present, the data
module to run this station only need to follow [11.2 Connect Network] to run the station. Another
condition is in a state of running stations. At this moment, you just need to highlight and right click
the data module that has been added into the tree structure menu, then click [Run].
*The operating steps are the same to run the [Data QC] module.
31
HcMonitor2.0 No. CHC-YHSC-001-2016
CHC Navigation
User Guide Version:B/0
There are two aspects to stop module. One is to follow [11.2 Connect Network] to stop the
station: all data module of this station will be stopped; another condition is that the data module is
running. Then you need to highlight and right click the data module in tree structure menu, and click
[Stop].
*The operation steps are the same so as to stop [Data QC] module.
11.4.6 Reset
This function is mainly used to abandon the current data storage and run the data module again.
Highlight and right click the existing data module in tree structure menu, then click [Reset].
32
HcMonitor2.0 No. CHC-YHSC-001-2016
CHC Navigation
User Guide Version:B/0
*When resetting the data storage module, stored data in current period will be abandoned and
will record time again from this moment to store data; when resetting the data quality check module,
all previous quality report from beginning until now will be abandoned and a new quality
examination report will be regenerated from this moment.
11.5 Properties
This part is mainly used to check all types of property information of stations that has been
added. Left click property menu of stations at left, all selected stations‟ information will be shown in
content display area at right. Details as follows:
Sky Plot
33
HcMonitor2.0 No. CHC-YHSC-001-2016
CHC Navigation
User Guide Version:B/0
Satellite Signal
34
HcMonitor2.0 No. CHC-YHSC-001-2016
CHC Navigation
User Guide Version:B/0
Station Property
We can also highlight and right click the station, you want to use, in the tree structure menu, then
click [Station Property].
To check station‟s parameter configuration information, please follows the steps below:
35
HcMonitor2.0 No. CHC-YHSC-001-2016
CHC Navigation
User Guide Version:B/0
Details as follows:
36
HcMonitor2.0 No. CHC-YHSC-001-2016
CHC Navigation
User Guide Version:B/0
At present, we can click [calculate] button to use single station position(SSP) to calculate
*NOTES: Figure shown above is the coordinate position after using single point positioning,
which has a relatively large difference with the actual station location. Clicking [Apply] button can
apply single position function to calculate the coordinate system.
37
HcMonitor2.0 No. CHC-YHSC-001-2016
CHC Navigation
User Guide Version:B/0
Station Layout
At present, we can see station layout shown at content-display area. We can also switch to map
as follows:
*NOTES: We can also switch to combined map. The switching button is at upper-right corner.
38
HcMonitor2.0 No. CHC-YHSC-001-2016
CHC Navigation
User Guide Version:B/0
Data Flow
As shown above, we can find related information about these receivers at the right side of the
content display zone.
We can click [Tab] label to check other information:
39
HcMonitor2.0 No. CHC-YHSC-001-2016
CHC Navigation
User Guide Version:B/0
40
HcMonitor2.0 No. CHC-YHSC-001-2016
CHC Navigation
User Guide Version:B/0
Location Information
11.9 Delete
This part is mainly used to delete station. Highlight and right click the added [Station] in tree
structure menu at left, then click [Delete Station].
*NOTE:Only can those stations that have already stopped running be deleted.
41
HcMonitor2.0 No. CHC-YHSC-001-2016
CHC Navigation
User Guide Version:B/0
[Engine] menu. Then choose the engine that you want to add.
Press Alt+O to directly call [POST Engine] interface.
Highlight and right click the appropriate engine, then click [Add XXX Engine] button to finish
adding engine you want.
At present, the pop-up [Add Engine] window is as shown below:
42
HcMonitor2.0 No. CHC-YHSC-001-2016
CHC Navigation
User Guide Version:B/0
After setting relevant parameters and selecting the server where you want to add, click [OK]
Click [Select Coordinate System] to enter the corresponding interface. Details as follows:
After choosing the coordinate system you want to use as shown above, click [OK] button:
43
HcMonitor2.0 No. CHC-YHSC-001-2016
CHC Navigation
User Guide Version:B/0
After setting appropriate coordinate system could you keep configuring other related parameters:
44
HcMonitor2.0 No. CHC-YHSC-001-2016
CHC Navigation
User Guide Version:B/0
*NOTES: Please select Base Station and Mobile Station appropriately to create the RTK Engine.
After configuring related parameters as above, click [OK] to finish adding RTK Engine.
The method to add [POST Engine] or [PPP Engine] is the same.
*NOTE: The engine you add is visible on both main server and sub-server; however, the real
operation of the engine is at the server that you choose beforehand.
45
HcMonitor2.0 No. CHC-YHSC-001-2016
CHC Navigation
User Guide Version:B/0
There are two aspects to run engine. One is to click button under toolbar menu:
By this way can you run all added solution engines at once.
Another way is to highlight and right click [RtkE#] you want to operate in tree structure menu,
then click [Start Engine] again. Details as follows:
*[RtkE#] is default. System will automatically label them. However, you can also name it by
yourself.
There are two methods to stop calculating engine. One is to click button in toolbar. Details
as follows:
By this way can you stop all added calculating engines at once. Another method is to click [Stop
Engine].
46
HcMonitor2.0 No. CHC-YHSC-001-2016
CHC Navigation
User Guide Version:B/0
12.4 Property
This part is mainly used to check engine property and different types of processor data. Left
click the processor that you want to check. Different types of processor data will display in the
content-display area at right. Details as follows:
Net View
*In the net view, red represents base station; green represents mobile station.
47
HcMonitor2.0 No. CHC-YHSC-001-2016
CHC Navigation
User Guide Version:B/0
RTK Status
Filtering Solution
48
HcMonitor2.0 No. CHC-YHSC-001-2016
CHC Navigation
User Guide Version:B/0
*Straight line is the curve Graph for stations; Curve Line is the Curve Graph for points.
Curve Graph
49
HcMonitor2.0 No. CHC-YHSC-001-2016
CHC Navigation
User Guide Version:B/0
Scatter Graph
50
HcMonitor2.0 No. CHC-YHSC-001-2016
CHC Navigation
User Guide Version:B/0
Station Coordinate
Highlight and right click [RtkE#] under RTK Processor in tree structure menu on the left side,
then click [Engine Property] menu.
51
HcMonitor2.0 No. CHC-YHSC-001-2016
CHC Navigation
User Guide Version:B/0
*NOTE: Delete commend can only delete the processor that has already been stopped.
13 Broadcast Ephemeris
This module is mainly used to check ephemeris and relevant parameters of all satellites that can
be searched by stations. Highlight the broadcast ephemeris at left, then the satellite ephemeris can
display on the content-display area at right.
52
HcMonitor2.0 No. CHC-YHSC-001-2016
CHC Navigation
User Guide Version:B/0
We can choose any satellites under the selection bar with satellite numbers to check the specific
parameters:
53
HcMonitor2.0 No. CHC-YHSC-001-2016
CHC Navigation
User Guide Version:B/0
14 Precise Ephemeris
This module is mainly used to download data documents of rapid ephemeris and precise
ephemeris. Highlight and right click [Precise Ephemeris] under tree structure menu, then click
[Configuration]:
54
HcMonitor2.0 No. CHC-YHSC-001-2016
CHC Navigation
User Guide Version:B/0
After selecting the needed ephemeris type and configuring relevant parameters, click [OK]. At
present, highlight and right click [Precise Ephemeris] button at left, then click [Download].
At present, the data document about ephemeris has already started to download:
15 System Monitor
This module is mainly used to monitor each system status, including overload status, net status,
55
HcMonitor2.0 No. CHC-YHSC-001-2016
CHC Navigation
User Guide Version:B/0
56
HcMonitor2.0 No. CHC-YHSC-001-2016
CHC Navigation
User Guide Version:B/0
16 Tool
This module is mainly to access some tools, including 4 tools: coordinate converter, RINEX
converter, Antenna Management, and Antenna Switcher. We can click [Tool]-->[XXX] under menu
bar, or press Alt+T to pop-up dropdown menu. Similarly, Alt+C can call out the [Antenna Switcher]
window/interface.
57
HcMonitor2.0 No. CHC-YHSC-001-2016
CHC Navigation
User Guide Version:B/0
Coordinate Converter
RINEX Converter
58
HcMonitor2.0 No. CHC-YHSC-001-2016
CHC Navigation
User Guide Version:B/0
Antenna Management
59
HcMonitor2.0 No. CHC-YHSC-001-2016
CHC Navigation
User Guide Version:B/0
Antenna Switcher
*Notes: [Coordinate Converter] tool will report error when running in a new installed
system: “Cannot run application since the parallel configuration of that application is incorrect.
Please refer to application event calendar or use commend like tool [sxstrace.exe] to get
relevant detailed information.” The reason is that new system does not install VC2008 Runtime
Library. You can normally use after directly running “vcredist x86.exe’ in the installation
directory; if you cannot find the application in installation directory, you can still run it after
17 View
This module is mainly used to control the display/indication of Toolbar, Navigation Bar, and Log
Bar.
60
HcMonitor2.0 No. CHC-YHSC-001-2016
CHC Navigation
User Guide Version:B/0
As shown above, if check box in front of Toolbar, Navigation Bar and Log Bar was selected,
then that function is being displayed; If unchecked, then that function will not be displayed.
18 Report
This module is mainly used to check the quality examination report that generates by station data.
You have to check [generate quality report] when setting up data quality examination parameters.
61
HcMonitor2.0 No. CHC-YHSC-001-2016
CHC Navigation
User Guide Version:B/0
As shown above, since we set the data storage interval to be „1h‟, the relevant report will be
generated after the data quality examination module has been run for 1 hour. Moreover, the report
will be generated every hour until you stop the operation of that module. To export the interface of
quality testing module, you can directly click [Report] under menu bar or use shortcut key,
“Alt+W”.
62
HcMonitor2.0 No. CHC-YHSC-001-2016
CHC Navigation
User Guide Version:B/0
At present, we can examine quality check report that produced by any station. Details as follows:
63
HcMonitor2.0 No. CHC-YHSC-001-2016
CHC Navigation
User Guide Version:B/0
As shown above, the quality testing report listed in the context window at the right side of the
interface is the quality testing report that we selected. At present, we can select any report in the
interface to check, by clicking [Browse]. Then specific parameters of that quality testing report will
pop up as follows:
64