The document provides information about analyzing the structural response of a 10-story residential building in Alexandria to earthquake loads. It asks the student to: (1) calculate the story shear at each floor level and draw its distribution; (2) find bending moment and shear forces in the RC columns; (3) check stability against overturning; and (4) calculate percentage of force in each shear wall for the top floor. Key assumptions include a solid slab floor with thickness of 16 cm, shear wall thickness of 25 cm, and live load of 200 kg/m^2.
The document provides information about analyzing the structural response of a 10-story residential building in Alexandria to earthquake loads. It asks the student to: (1) calculate the story shear at each floor level and draw its distribution; (2) find bending moment and shear forces in the RC columns; (3) check stability against overturning; and (4) calculate percentage of force in each shear wall for the top floor. Key assumptions include a solid slab floor with thickness of 16 cm, shear wall thickness of 25 cm, and live load of 200 kg/m^2.
The document provides information about analyzing the structural response of a 10-story residential building in Alexandria to earthquake loads. It asks the student to: (1) calculate the story shear at each floor level and draw its distribution; (2) find bending moment and shear forces in the RC columns; (3) check stability against overturning; and (4) calculate percentage of force in each shear wall for the top floor. Key assumptions include a solid slab floor with thickness of 16 cm, shear wall thickness of 25 cm, and live load of 200 kg/m^2.
Sohag University Earthquake Engineering Civil Eng. Dept.
Faculty of Engineering Sheet 2 4nd year
- Assume any missing data:-
For the shown figure of a housing building lies at Alexandria. The building consists of (10) repeated floors. Live load = 200 kg/m2. assume the floor consists of solid slab (ts=16 cm) and beams. The thickness of shear walls=25 cm. Due to Earthquake loads it is required to :- a) Calculate the story shear at each floor level and draw its distribution on the height of the building. b) Find the bending moment and shearing forces acting at base level of the R.C. Columns. c) Check the stability of the building against overturning. d) Calculate the percentage of force (V) acting on each shearing wall for last floor ( )أخر طاب ق. Neglect the shearing force on columns. Take :- K=0.67 , S=1.0.
Plane Elevation
With my best wishes Prof. Dr. Mohamed M. A. Hussein