Professional Documents
Culture Documents
1 What is shape factor with respect to itself if the surface is concave, convex and flat?
2 Derive an expression for a rate of radiation heat exchange when a radiation shield is inserted
between two large parallel plates
3 State and prove Kirchoff’s law of radiation.
1
GOVERNMENT ENGINEERING COLLEGE BHUJ
1 Dry saturated steam at 10 bar enters a counter-flow heat exchanger at the rate of 15 kg/s and
leaves at 300°C. The entry of gas at 600°C is with mass flow rate of 25 kg/s. If the condenser
tubes are 30 mm diameter and 3 m long, make calculations for the heating surface area and the
number of tubes required. Neglect the resistance offered by the metallic tubes.
2 Define fouling factor? Explain its effect on the performance of a heat exchanger?
3 Derive equation of logarithmic mean temperature difference for Counter flow heat exchanger.
4 Define effectiveness of heat exchanger. Derive equation for effectiveness of a Parallel flow heat
exchanger.
2
GOVERNMENT ENGINEERING COLLEGE BHUJ
1 Explain the mechanism of convection heat transfer. Also explain natural and forced convection.
3
GOVERNMENT ENGINEERING COLLEGE BHUJ
1 With neat sketch explain the heat conduction through a plan wall with and without heat
generation.
2 Write the general three-dimensional heat conduction equation in i) Cylindrical coordinates ii)
Spherical coordinates
3 What is meant by thermal resistance? Explain the electrical analogy for solving heat transfer
problems.
4 Derive general heat conduction equation in cylindrical coordinates.
4
GOVERNMENT ENGINEERING COLLEGE BHUJ
3 Define condensation? Differentiate between film wise and drop wise condensation. Which type
has better heat transfer coefficient? In condenser design which of condensation is usually
selected?