Professional Documents
Culture Documents
Hello Everyone,
I would like to know when we go for finger type slug catchers and when
we use the vessels , what are the cons and pros for each one and which Saeid R. Mofrad
are the major criteria for this selection? Principal Process Engineer at Petrofac (P.E.)
Unfollow Alireza
Your group contribution level
Like Comment (2) Share Follow Reply Privately November 30, 2011
Congrats! Regularly add great discussions and
Add to Manager's Choice Close Discussion
comments to stay a Top Contributor.
Comments
2 comments
Top Contributor
Mojtaba Habibi
Process Engineer at Petroleum Engineering and Development Company (PEDEC) Ads You May Be Interested In
Top Contributor
MBA Earn while you Learn
Mojtaba In my view the important parameters for selection of slug catcher type are: A three-year 100% online MBA
›
course from Leeds Metropolitan
1. Design Pressure: University
If design pressure is high then the vessel thickness and consequently vessel cost will be higher. Are you Ready to Manage?
2-Day Seminar on Reliability &
So in this case finger type made from piping elements will be more economical option. ›
Maintenance, March Birmingham.
Sign up now>
2. Slug Volume:
Plant Managers:
For low to moderate slug volume (say 200 m3) vessel type can be used with reasonable Make sense of all the data
›
dimensions. For higher slug volumes the vessel type dimensions will fall in a range that is costly generated in your plant. Now you
and difficult to fabricate and finger type should be selected instead. I have seen finger type slug can; see how!
catchers sized for slug volumes of 1000 m3 and 2500 m3.