Professional Documents
Culture Documents
Exhaust P Sensor 4
Exhaust P Sensor 4
WARNING
Wear cut-resistant gloves during the operation.
REMOVAL
Position the vehicle on a two-post liftVehicle : Towing and lifting (02A, Lifting equipment).
Remove:
the air filter unitAir filter box : Removal - Refitting ,
the engine undertray bolts,
-1-
Disconnect the oil vapour rebreathing pipe union from the rocker cover(1 ) .
-2-
-3-
Remove:
the bolt(2) from the turbocharger air outlet duct on the lifting eye,
the nut(3) from the turbocharger air outlet duct on the EGR,
-4-
Separate the air outlet duct from the turbocharger.
2. REMOVAL OPERATION
-5-
Remove the exhaust gas pressure sensor clip(6 ) .
-6-
Remove:
the exhaust gas pressure sensor hollow bolt(7) from the exhaust manifold,
REFITTING
-7-
Always replace the exhaust gas pressure sensor clip.
2. REFITTING OPERATION
Torque tighten the exhaust gas pressure sensor hollow bolt on the exhaust manifold32 N.m.
Repair-10x08x06-01x37-1-12-1.xml
-8-