Professional Documents
Culture Documents
Select Hide Delete Hide Except Delete Except Format Text Undo Undo All Save Text Pieces View More Web Style Preview Close Print Edit Tools Help
Aim
To verify the laws of the combination of resistances using a meter bridge.
Apparatus/Materials Required
Meter Bridge
Leclanche cell
Resistance Box
Galvanometer
Jockey
Sand Paper
Connecting wire
A set square
Circuit Diagram
Theory
(i) The resistance of a resistance wire or a coil is given by
(100−l)
r = ⋅ R
l
where R is the resistance from the resistance box in the left gap, and l is the length of the meter bridge
wire from zero ends up to the balance point.
(ii) When two resistors r1 and r2 are connected in series, their combined resistance is given as follows:
R s = r1 + r2
Procedure
1. Mark the two resistance coils as r1 and r2.
2. To find the value of r1 and r2, follow the same steps as Experiment 1.
https://byjus.com/physics/verify-law-of-combination-of-reistance-using-metre-bridge/ 1/4
9/4/23, 10:34 PM [EDIT] To Verify The Laws Of Combination Of Resistances Using A Metre Bridge
Select Hide Delete Hide Except Delete Except Format Text Undo Undo All Save Text Pieces View More Web Style Preview Close Print Edit Tools Help
Observations
coil ance
(ohm)
r1 only 1. r1 = ……
2.
3.
r2 only 1. r2 = ……
2.
3.
r1 and r2 1. Rs =
in series ……
2.
3.
Result
Within limits of experimental error, theoretical and experimental values of Rs are the same. Hence, the
law of resistance in series is verified.
https://byjus.com/physics/verify-law-of-combination-of-reistance-using-metre-bridge/ 2/4