Professional Documents
Culture Documents
Lab 7
Lab 7
Lab report 7
3rd Semester
Objective
The purpose of the experiment is to check the flat belt with different angles around a
pulley. The data that is obtained is compared with theoretical values and the coefficients
of friction is determined by specific formula at different angles.
Apparatus
Procedure
Set up the flat belt on the apparatus and place a fixed load of T1=5 N on the hanger.
Place the cord on the pulley peg in a clockwise direction and add weights on
hanger. Note it’s value is Tcord.
Gently add weights to the cord hanger until the pulley start rotating with constant
speed.
Note the load hanger (Tcord) and the spring balance reading (T2 ) at which pulley
start rotating with constant speed.
Repeat the experiment for angle of 300, 600, 900 and 1200.
Observations