Professional Documents
Culture Documents
Rru 5502
Rru 5502
Issue 04
Date 2018-09-12
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective
holders.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and
the customer. All or part of the products, services and features described in this document may not be
within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements,
information, and recommendations in this document are provided "AS IS" without warranties, guarantees or
representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Email: support@huawei.com
Contents
1 Overview......................................................................................................................................... 1
1.1 Appearance ................................................................................................................................................................... 1
1.2 Physical Ports ............................................................................................................................................................... 2
1 Overview
The RRU5502 is an outdoor remote radio unit. It is the RF part of a distributed base station
and can be installed near the antenna. The RRU5502 modulates and demodulates baseband
and RF signals, processes data, amplifies power for signals, and supports voltage standing
wave ratio (VSWR) tests. With the software-defined radio (SDR) technology, the RRU5502
can work in GL, UL, GUL, LM, GLM, or ULM mode through software configuration.
The RRU5502 adopts a 4T4R design, which further improves the output power and carrier
capacity.
The software version of the RRU5502 is SRAN13.1 and is compatible with the N–1 and N–2
versions of MBTS, MBSC, and OSS NEs. Therefore, the RRU5502 can be used with products
of SRAN11.1, SRAN12.1, and SRAN13.1 versions. All these three versions include the
RRU5502 software components. The RRU5502 used in these versions has no impact on
product KPIs.
1.1 Appearance
Figure 1-1 shows the appearance of the RRU5502.
2 Technical Specifications
2.2 Capacity
Table 2-2 Single-RAT capacity
RAT Capacity
UMTS (Supported only by the 2100 MHz frequency band) Each RRU5502
supports eight carriers.
LTE FDD Each RRU5502 supports three carriers in one frequency band and four
carriers in two frequency bands. The LTE FDD bandwidth is 5 MHz, 10
MHz, 15 MHz, or 20 MHz.
LTE NB-IoT (Supported only by the 1800 MHz frequency band) Each RRU5502
supports one carrier.
RAT Capacity
GSM+LTE FDD For detailed specifications, see Table 2-8 and Table 2-9.
UMTS+LTE FDD For detailed specifications, see Table 2-10, Table 2-11, and
Table 2-12.
GSM+UMTS+LTE FDD For detailed specifications, see Table 2-13 and Table 2-14.
RAT Capacity
LTE FDD+LTE NB-IoT For detailed specifications, see Table 2-15.
GSM+LTE FDD+LTE For detailed specifications, see Table 2-16.
NB-IoT
UMTS+LTE FDD+LTE For detailed specifications, see Table 2-13 and Table 2-14.
NB-IoT
LTE FDD+ NR For detailed specifications, see Table 2-19 and Table 2-21.
GSM+LTE FDD+NR For detailed specifications, see Table 2-20 and Table 2-22.
The GSM receiver sensitivity, as recommended in 3GPP TS 51.021, is measured at the antenna
connector assuming that the channel rate reaches 13 kbit/s and the bit error rate (BER) is lower than
or equal to 2%.
The UMTS receiver sensitivity, as recommended in 3GPP TS 25.104, is measured at the antenna
connector assuming that the channel rate reaches 12.2 kbit/s and the BER is lower than or equal to
0.1%.
The LTE FDD receiver sensitivity is measured, as recommended in 3GPP TS 36.104, under a 5 MHz
bandwidth based on the FRC A1-3 in Annex A.1 (QPSK, R = 1/3, 25 RBs) standard.
The LTE NB-IoT receiver sensitivity is measured, as recommended in 3GPP TS 36.104, under a 200
kHz bandwidth and a 15 kHz subcarrier spacing based on the FRC A14-1 in Annex A.14 (π/2 BPSK,
R = 1/3, 1 RB) standard.
Table 2-5 Typical output power of the RRU5502 (2100 MHz, UMTS)
Table 2-6 Typical output power of the RRU5502 (1800 MHz/2100 MHz, LTE FDD)
Table 2-7 Typical output power of the RRU5502 (1800 MHz LTE FDD+2100 MHz LTE FDD)
Table 2-8 Typical output power of the RRU5502 (1800 MHz, GL MSR)
Number Number of Output Power Output Power Bandwidth of
of GSM LTE FDD per GSM TRX per LTE FDD an LTE FDD
TRXs Carriers (W) Carrier (W) Carrier (MHz)
Table 2-9 Typical output power of the RRU5502 (1800 MHz GL MSR+2100 MHz LTE FDD)
Table 2-10 Typical output power of the RRU5502 (2100 MHz, UL MSR)
Table 2-11 Typical output power of the RRU5502 (1800 MHz LTE FDD+2100 MHz UMTS)
Table 2-12 Typical output power of the RRU5502 (1800 MHz LTE FDD+2100 MHz UL MSR)
Table 2-13 Typical output power of the RRU5502 (1800 MHz GL MSR+2100 MHz UMTS)
Table 2-14 Typical output power of the RRU5502 (1800 MHz GL MSR+2100 MHz UL MSR)
Table 2-15 Typical output power of the RRU5502 (1800 MHz LM MSR+2100 MHz LTE FDD)
Table 2-16 Typical output power of the RRU5502 (1800 MHz GLM MSR+2100 MHz LTE
FDD)
Numb Numb Numb Output Output Outpu Bandwi Numb Output Bandwi
er of er of er of Power Power t dth of an er of Power dth of
GSM LTE LTE per per Power LTE LTE per LTE an LTE
TRXs FDD NB-Io GSM LTE per FDD FDD FDD FDD
Carrier T TRX FDD LTE Carrier Carrier Carrier Carrier
s Carrie (W) Carrier NB-Io (MHz) s (W) (MHz)
rs (W) T
Carrie
r (W)
Table 2-17 Typical output power of the RRU5502 (1800 MHz LM MSR+2100 MHz UMTS)
Table 2-18 Typical output power of the RRU5502 (1800 MHz LM MSR+2100 MHz UL MSR)
Numbe Numbe Output Output Bandw Numbe Numbe Output Output Bandw
r of r of Power Power idth of r of r of Power Power idth of
LTE LTE per per an LTE UMTS LTE per per an LTE
FDD NB-IoT LTE LTE FDD Carrier FDD UMTS LTE FDD
Carrier Carrier FDD NB-IoT Carrier s Carrier Carrier NB-IoT Carrier
s s Carrier Carrier (MHz) s (W) Carrier (MHz)
(W) (W) (W)
1 1 4x30 4x10 5, 10, 1 1 4x20 4x20 5, 10,
(MIMO 15, 20 (MIMO (MIMO 15, 20
) ) )
2 1 Carrier 2x10 5, 10, 1 1 2x10 4x20 5, 10,
(MIMO 1: 4x40 15, 20 (MIMO (MIMO 15, 20
) Carrier ) )
2: 4x10
Table 2-19 Uplink frequency spectrum sharing of the RRU5502 (1800 MHz, LN, 4R, one
channel)
3 1 15, 20 15, 20
Table 2-20 Uplink frequency spectrum sharing of the RRU5502 (1800 MHz, GLN, 4R, one
channel)
Table 2-21 Uplink frequency spectrum sharing of the RRU5502 (1800 MHz LN+2100 MHz LTE
FDD, 4R, one channel)
Table 2-22 Uplink frequency spectrum sharing of the RRU5502 (1800 MHz GLN+2100 MHz
LTE FDD, 4R, one channel)
The typical power consumption of an RRU is measured when the ambient temperature is
25°C and the RRU is 50% loaded. The actual power consumption has a 10% deviation from
this value.
Item Specifications
Input power –48 V DC; voltage range: –36 V DC to –57 V DC
Item Specifications
Dimensions (H x W x D) 480 mm x 356 mm x 140 mm
Weight 25 kg
Item Specifications
Number of CPRI ports 2
CPRI data rate 1.25 Gbit/s, 2.5 Gbit/s, 4.9 Gbit/s, or 9.8 Gbit/s
CPRI topology Star, chain, or dual-star
Item Specifications
Cascading level CPRI MUX:
GL: 4
UL: 4
GUL: 4
LM: 4
GLM: 4
ULM: 4
Maximum distance from GL/UL/GUL: The maximum distance from a BBU varies
a BBU with the types of LTE FDD baseband processing boards:
LBBPc/LBBPd1: 20 km
LBBPd2/UBBPd3/UBBPd4/UBBPd5/UBBPd6/UBBPe:
40 km
LBBPd3
– Number of LTE FDD cells ≤ 3: 40 km
– Number of LTE FDD cells > 3: 20 km
LM/GLM/ULM: 20 km
Item Specifications
Operating temperature –40°C to +55°C (without solar radiation)
–40°C to +50°C (with solar radiation)
Relative humidity 5% RH to 100% RH
Absolute humidity 1 g/m3 to 30 g/m3
Atmospheric pressure 70 kPa to 106 kPa
Operating environment The following standards must be complied with:
3GPP TS 45.005
3GPP TS 25.141
3GPP TS 36.141
3GPP TS 38.104
3GPP TS 37.141
ETSI EN 300019-1-4 V2.1.2 (2003-04) Class 4.1:
"Non-weather protected locations."
Shockproof protection NEBS GR63 zone4