Professional Documents
Culture Documents
Caution: This circuit is connected directly to the AC line and presents a hazard if any
part is touched while connected to the line. Use caution and do not touch any parts
while the circuit is connected to the AC line. You may want to use a 9 volt battery
connected across the 12 volt zener to check the basic operation. The DC voltage at
pins 1,2,3,5,6,7 will all be around 4.3 volts if the circuit is working correctly. If the
DC voltages are all correct, you can use a variac to slowly apply the full line voltage
and check for proper operation.