Professional Documents
Culture Documents
ATTACHMENTS
SKID ATTACHMENTS
Angle Brooms.............................................. 38
Box Blades..................................................... 9
Breakers...................................................... 29
Buckets........................................................ 22
Claw Grapples.............................................. 19
Cold Planers................................................. 30
Combination Buckets................................... 23
Compact Attachments ................................ 42
Dozer Blades – 6-Way................................. 33
Excavator Augers......................................... 13
Hopper Brooms............................................ 39
Light Material/Snow Buckets...................... 25
Loader Boom............................................... 28
Pallet Forks.................................................. 27
Powered Rakes............................................ 11
Primary Seeders............................................ 8
Ripper.......................................................... 14
Road Saws................................................... 31
Rock Grapples/Buckets............................... 20
Root Grapples.............................................. 21
Scrap Grapple Buckets................................ 24
Silage Defacer............................................. 40
Skid Augers................................................. 12 Give your Skid Steer, Compact Track
Skid Cutters................................................... 3 Loader, or Mini Excavator the power
Skid Graders................................................ 15
to get the job done with Kubota’s top
Skid Steer Hitch........................................... 32
quality line of attachments.
Skid Tillers..................................................... 7
Snow Blowers.............................................. 36
Snow Pushers.............................................. 35
Stump Grinder............................................. 16
Tilt Hitch...................................................... 32
Tree/Post Pullers.......................................... 41
Trenchers..................................................... 17
Trimble® EarthWorks Go!............................. 10
Trip Edge Blades.......................................... 34
Utility Buckets.............................................. 26
Vibratory Rollers.......................................... 18
CUTTERS
SC2560 SC2572
AVAILABLE FOR: SSV65 / SSV75 / SVL65-2 / SVL75-2 / SVL97-2 Cutter Weight (kg)
w/o Skid Shoes, Gauge Wheel, 871 lbs (395) 1,098 lbs (498)
& Protective Door
• 2" Diameter cut capacity Gauge Wheel Weight (kg)
129 lbs (59)
• 1-1/2" – 18" Cutting height; infinitely variable Optional
• 10 Gauge steel deck; 1/4" side skirt Cutting Width (m) 60" (1.52) 72" (1.83)
Drive Medium
21-25 gpm (79.5-94.6) flow
Motor Volume (lpm)
High Volume
26-30 gpm (98.4-113.6) flow
(lpm)
11-20 gpm
14,100 fpm (71.6) 14,000 fpm (71.1)
Motor (mps/
at 20 gpm (975.7) at 20 gpm (75.7)
lpm)
Optional front gauge wheel
21-25 gpm
provides easy operation and Blade Tip Speed Motor
14,000 fpm (71.1) 13,800 fpm (70.1)
at 25 gpm (94.6) at 25 gpm (94.6)
handling over uneven terrain. (mps/lpm)
CE ATTACHMENTS KUBOTA.CA 3
SC40 SKID CUTTERS
CUTTERS
Farmers and ranchers, developers, contractors, Cutting Capacity (cm) 4" (10.2) Diameter
High Volume
27-43 gpm flow (98.4-162.8)
(lpm)
CUTTERS
AVAILABLE FOR: SSV75 / SVL75-2
• 18-31 gpm
• 72" Width
• 6" Cutting capacity
• 1/4" Deck thickness
• Single plate blade carrier
• Replaceable carbide teeth on bottom of carrier
• Patent pending retractable door
• Wide angled full length skid shoes SC6072
Cutter Weight (kg)
w/skid shoes and 1,980 lbs (900)
w/o front roller wheels
CE ATTACHMENTS KUBOTA.CA 5
SC70 SKID CUTTERS
CUTTERS
Contractors and developers with extreme Cutting Width (m) 73-1/2" (1.87)
clearing needs will easily eliminate brush Overall Width (m) 84-3/8" (2.14)
away from the operator. on bottom of blade carrier. Skid Shoes Construction (mm) 3/8" (10) Plate
TILLERS
AVAILABLE FOR: SSV65 / SSV75 / SVL65-2 / SVL75-2 / SVL97-2
• 6" Offset capability Weight (kg) 785 lbs (356) 880 lbs (399)
rip up hard soil. in the soil without leaving Rotor Swing Diameter (cm) 18.3" (46.5)
*At 2600 psi rotor speed RPM will be reduced which could affect tilling
performance.
CE ATTACHMENTS KUBOTA.CA 7
PS20 PRIMARY SEEDERS
SEEDERS
PS2072 PS2086
Tractor Horsepower (kw) 25-60 hp (18.6-44.7)
Not meant for small tractor such as Kubota BX
to-soil contact. Packer Rollers (cm) 9" (22.9) Notched cast iron bed forming packer rollers
DIRTWORKING
AVAILABLE FOR: SSV65 / SSV75 / SVL75-2 / SVL65-2 / SVL97-2
the time eliminating operator fatigue and saving money Base Weight (kg) 1,755 lbs (796) 1,836 lbs (833) 1,917 lbs (870)
on fill and concrete. Upper Frame Cross Tube (cm) 4" x 6" x 5/16" (10.2 x 15.2 x .8)
Lower Frame Cross Tube (cm) 2" x 4" x 1/4" (5.1 x 10.2 x .6)
grading operations from the cab Tilt Pin (cm) 3" (7.6)
with precision and accuracy. Grader Blade (cm) 1/2" x 6" (1.3 x 15.2), Reversible, replaceable
Reversible Side Cutters (cm) AR400 steel, 6" x ½" (15.2 x 1.3)
Tires (cm) 18" x 8.5" x 10" (45.7 x 2 1.6 x 25.4) Foam filled turf
Optional 82" mast Welded Lift Cylinder (cm) 3" x 6" x 1.5" (7.6 x 15.2 x 3.8)
assembly for 3rd party Welded Tilt Cylinders (cm) 2- 2.5" x 5" x 1.25" (6.4 x 12.7 x 3.2)
CE ATTACHMENTS KUBOTA.CA 9
TRIMBLE® EARTHWORKS GO!
DIRTWORKING
BYOD INTERFACE
2D GRADE CONTROL SYSTEM FOR BB30 SERIES BOX BLADE (Bring Your Own Device)
Trimble GO! Box: Fully portable with Smart Device Display: Designed for
magnetic mounts, contains system IMU visibility in bright daylight, intuitive
and on board computer and ruggedized software design for unmatched ease of
for construction environments and use, integrated setup tutorials to get up
exposure to the elements. and running faster than ever.
DIRTWORKING
AVAILABLE FOR: SSV65 / SSV75 / SVL65-2 / SVL75-2 / SVL97-2
level ground for seeding, remove unwanted material Hydraulic Pressure Range (MPa) 2250 to 3500 psi
(15.51-24.13 MPa)
and debris, and rejuvenate gravel driveways and lots. Non-Angled Working Width (m) 72" (1.83) 90" (2.29) 72" (1.83) 90" (2.29)
Powered Rakes make excellent rental tools. Weight (kg) 1101 (499) 1255 (569) 1098 (498) 1256 (570)
and rake to float with the contour of Drive Chain #50 Double continuous roller chain, high tensile,
enclosed in oil bath
the ground.
Side Plates Standard, removable with storage rack
OPTIONS
Hitch Fixed Hitch N/A Standard
Carbide tipped studs and
bi-directional roller with Angle Hitch Available N/A
CE ATTACHMENTS KUBOTA.CA 11
SA20/35 SKID AUGERS
DIRTWORKING
• Patented level indicator on SA20 Base Weight w/o Options (kg) 46 lbs w/o auger (20.8) 372 lbs w/o auger (168.7)
and others. The SA35 meets the industrial Gearbox Hydraulically driven planetary gearbox; reversible
contractors, construction companies, and Auger Diameter 6" 9" 12" 15" 18" 24" 30" 36"
municipalities. Dirt – hex hub 45 79 112 116 135 206 224 280
*Quantity of teeth includes the 4 drill points to make the auger pilot.
DIRTWORKING
EA20: AVAILABLE FOR: KX018-4 / U17 / U27
EA20 EA35
Hydraulic Requirements 6-30 gpm @ 1500 to 3500 psi 10-30 gpm @ 1500 to 3500 psi
EA35: AVAILABLE FOR: KX030 / KX033 / KX040 / (22.7-113.6 lpm (37.8-113.6 lpm
@ 10.34-24.13 MPa) @ 10.34-24.13 MPa)
KX057 / KX71 / KX080 / U35 / U48 / U55
Base Weight
46 lbs (20.9) 64 lbs (29)
w/o Options (kg)
• EA20 motor options:
Auger Flighting Thickness
6-15 gpm; 10-20 gpm (mm)
5/16" (8)
Torque: Up to 2620 ft/lb @ 3000 PSI Auger Teeth Forged, individually replaceable, 40° angle installed on flat side
• EA35: 15-30 gpm Motor 50° angle installed on angled side
Torque: Up to 2732 ft/lb @ 3000 PSI Gearbox Hydraulically driven planetary gearbox; reversible
• Drive units can be used with either Gearbox Oil Capacity (mL) 14 oz (414) 1.69 pints (.8 L)
CE ATTACHMENTS KUBOTA.CA 13
RP30 RIPPER
DIRTWORKING
RP30
Ripper Overall Width (m) 68-1/2" (1.74)
Number of Shanks 5
Five shank design with Wide skid shoe design
Skid Shoe Construction (mm) Bolt-on 5/16" (8) steel plate
replaceable tips are easy helps maintain constant
to adjust to depth and depth. Shank Tube Construction (cm) 5' x 5" (12.7 x 12.7) Square tube with
reinforcement plate around bottom of
conditions. shank opening
DIRTWORKING
AVAILABLE FOR: SSV65 / SSV75 / SVL65-2 / SVL75-2 / SVL97-2
Full length, heavy-duty After loading the SG25 Skid Shoe Construction (mm) 3/8" (10) Thick with a formed bevel
to prevent gouging
skid shoes are reversible onto a trailer, a bucket
Cutting Edges (cm) Four 1/2" x 6" (1.3x15.2) high-carbon,
and replaceable. can be mounted on top heat-treated blades that are reversible and
using the storage lugs, to replaceable
save space. Cutting Edge Adjustment (cm) Variable vertical adjustment from level grade
to 1-1/2" (3.8) below grade
CE ATTACHMENTS KUBOTA.CA 15
SSG25 STUMP GRINDER
DIRTWORKING
DIRTWORKING
TR48 TR60
Weight w/2 Pitch Cup Chain &
1,236 lbs (560.6) 1,300 lbs (589.7)
Hydraulic Side Shift (kg)
AVAILABLE FOR: SSV65 / SSV75 / SVL65-2 / SVL75-2 / SVL97-2 Overall Length (m) 90.5" (2.30) 102.5" (2.60)
Used by rental yards, contractors, and developers to dig Trenching Widths Available (cm) 6", 8", 10" (15.2, 20.3, 25.4)
Chain Speed
Low Flow
(Depending on 227-366 fpm (69-112)
(m/min)
Heavy frame construction Skid Steer Flow
High Flow
& Pressure 221-373 fpm (67-114)
stands up to everyday Ratings)
(m/min)
rugged use.
Motor Case Drain Standard
Motor Reversible
Drive Bearings Between Motor Self-contained, single & double row ball bearings
Machined and enclosed & Drive Sprocket with extra heavy duty seals
front bearings are Chain Options-Numerous Cup teeth on 2 or 4 pitch, scorpion w/cup teeth,
or alligator w/cup teeth
protected against dirt
and offer extended life. Frame Construction (mm) Heavy-duty 5/16" (8) thick w/ 3/4" (19) reinforced bar around
three sides of the bottom lock pin slots
CE ATTACHMENTS KUBOTA.CA 17
VR VIBRATORY ROLLERS
DIRTWORKING
Working Width (cm) 73" (185) 85" (216) 73" (185) 85" (216)
Drum Width (cm) 72" (183) 84" (213) 72" (183) 84" (213)
MATERIAL HANDLING
AVAILABLE FOR: SSV65 / SSV75 / SVL65-2 / SVL75-2 / SVL97-2
SGC2072 SGC2084
Weight (kg) 895 lbs (406) 999 lbs (453)
CE ATTACHMENTS KUBOTA.CA 19
SGR/SRB15 ROCK GRAPPLES/BUCKETS
MATERIAL HANDLING
Number of Teeth 21 23 25 21 23 25
Grade 80 steel tine material
Tooth Spacing (cm) 3" (7.62) 3" (7.62)
with front gusseted tine Deep dish Tooth Thickness
tips. side panel design. (mm)
3/8" (9.5) 3/8" (9.5)
Working Length
of Teeth (cm) 37-3/4" (95.9) 39" (99.06)
Two cylinder
independent grapples Hydraulic Cylinder 2" x 8" x 1-1/4"
N/A
(cm) (5.08 x 20.32 x 3.175) Rod
help secure uneven
Max. Pressure
loads. Rating
3500 psi N/A
MATERIAL HANDLING
AVAILABLE FOR: SSV65 / SSV75 / SVL65-2 / SVL75-2 / SVL97-2
CE ATTACHMENTS KUBOTA.CA 21
BUCKETS
MATERIAL HANDLING
HD Buckets
HD AVAILABLE FOR: SSV65 / SSV75 / SVL65-2 / SVL75-2 / SVL97-2 Width (m) 66" (1.67), 68" (1.72),
74" (1.87), 80" (2.03)
HD80 HC AVAILABLE FOR: SVL97-2
Profile Low profile
• Available with standard floor or long floor Shell (mm) 3/16" (4.76)
• 10 Gauge shell on standard-duty Optional Weld-on Teeth or Bolt-on Edge 66 & 68: 7 Teeth
74: 8 Teeth
• Standard side cutters 80: 9 Teeth
Heavy-Duty with
weld-on teeth
Heavy-Duty with
bolt-on edge
MATERIAL HANDLING
AVAILABLE FOR: SSV65 / SSV75 / SVL65-2 / SVL75-2 / SVL97-2
CE ATTACHMENTS KUBOTA.CA 23
GB30 SCRAP GRAPPLE BUCKETS
MATERIAL HANDLING
to extend the life of the blade and Width (m) 69" (1.75) 75" (1.91) 81" (2.06)
replaceable to extend the life of the GB30 Closed Height (cm) 33" (83.8)
and its weld-on cutting edge. Grapple Jaw Opening (m) 40-1/2" (1.03)
Bucket Cutting Edge Thickness (mm) 3/4" (19) 3/4" (19) 1" (25)
Upper Grapple Jaw Pivot Pins (mm) Greasable 1-1/4" (2.5) pivot pins
Hydraulic Cylinder Pivot Pins (cm) Greasable 1" (2.54) pivot pins
MATERIAL HANDLING
AVAILABLE FOR: SSV65 / SSV75 / SVL65-2 / SVL75-2 / SVL97-2
CE ATTACHMENTS KUBOTA.CA 25
UB25 UTILITY BUCKETS
MATERIAL HANDLING
AVAILABLE FOR: SSV65 / SSV75 / SVL65-2 / SVL75-2 / SVL97-2 Three weld-on cast steel
skid steps make entering
• Replaceable pin-on tooth tips and exiting the power
machine safer.
• Angled bottom to aide in leverage
• Top tapered ripper teeth in sidewall
• Hardened cutting edge
This construction-grade Utility Bucket acts as a shovel-like
attachment for stump and small tree removal, relocating
landscaping rocks or boulders, and light trenching.
roots. Bottom Plate Construction (mm) Continuous welded 1/2" (13) steel
MATERIAL HANDLING
AVAILABLE FOR: SSV65 / SSV75 / SVL65-2 / SVL75-2 / SVL97-2
PFL5648 PFL5660
Side Step Yes Yes
Class II
Top center bracket can Tall rear guard keeps loads Frame Width (m) 45-7/8” (1.17)
be removed or lowered if from slipping backwards.
Frame Height (m) 40” (1.02)
an opening is needed for
Tine Thickness (cm) 1-3/4” (4.4)
accessing the skid steer
cab. Tine Width (cm) 4” (10.2)
CE ATTACHMENTS KUBOTA.CA 27
LB60 LOADER BOOM
MATERIAL HANDLING
LB60
Lift Capacity (kg) 6,000 lbs (2722)
Side plate with holes Secondary lift lug added Lift Lugs (cm) Two lugs, 1" (2.5) Plate
and slots enable the use in the middle of the Lift Lug Hole Diameter (cm) For up to 1" (2.5) shackle pins
of chain or straps for boom increases lifting Side Plate (mm) Slot for 5/16" (8) chain and
3" (76) hole for other chains or straps
stabilizing. capabilities when boom
is angled forward. Mast (cm) 6" x 6" (15.2x15.2) Tube
DEMOLITION
AVAILABLE FOR: SSV65 / SSV75 / SVL65-2 / SVL75-2 / SVL97-2 KXB310QA KXB360QA KXB460QA
K008 / KX018-4 / KX030 / KX71 / KX033 / KX040 Frequency Range 1300-2500 bpm 1200-2600 bpm 1000-2000 bpm
KX057 / KX080 / U10 / U17 / U27 / U35 / U48 / U55 Operating Weight (kg) 165 (75) 247 (112) 350 (160)
Oil Flow Range (lpm) 3.9-8.7 gpm 5.3-12.7 gpm 7.9-16.6 gpm
• Multiple tool options (15-33) (20-48) (30-63)
• Wear resistant steel housing Operating Pressure (bar) 1450-1740 psi 1740-2030 psi
(100-120) (120-140)
• Replaceable seal and bushing
Pressure Relief Setting 2170-2460 psi 2460-2760 psi
• CBE Constant blow energy Min. (bar) (150-170) (170-190)
a rental tool where optimum power and breaking Tool Shank Diameter (mm) 1.42" (36) 1.65" (42) 1.97" (50)
efficiency is required. Six models are available to
fit a variety of powered units. KXB510QA KXB560QA KXB860QA
Frequency Range 600-1800 bpm 500-1700 bpm 500-1700 bpm
Noise reducing design Oil Flow Range (lpm) 9.2-23.8 10.5-31.7 13.2-39.6
(35-90) (40-120) (50-150)
provides a lower operating
Operating Pressure (bar) 1300-2030 psi 1450-2030 psi
noise level than most. (90-140) (100-140)
Tool Shank Diameter (mm) 2.83 (72) 3.15 (80) 3.54 (90)
All hammers are shipped
with a moil point and a
chisel point tool and change
out is quick & easy.
CE ATTACHMENTS KUBOTA.CA 29
CP30 COLD PLANERS
DEMOLITION
Weight (kg) 1190 lbs 1360 lbs 1635 lbs 1805 lbs 1895 lbs 2215 lbs 2410 lbs
(540) (617) (741) (819) (860) (1005) (1093)
Number of Picks 30 38 40 50 60 76 90
Min. Hydraulic Flow (Lpm) 15 gpm (56.8) 24 gpm (91) 27 gpm (102) 30 gpm (114)
The CP30 Series features Min. Pressure (MPa) 2,000 psi 2,500 psi 2,500 psi 3,000 psi 3,500 psi
(1.38) (1.72) (1.72) (2.07) (2.41)
a 6" cutting depth, 5/18"
Max. Pressure (MPa) 3,500 psi (24) 5,000 psi (34)
drum wall and 2-1/2" tooth
Tilt Capability +/- 15° +/- 15° +/- 13° +/- 10° +/- 8° +/- 6°
standoff for efficient milling.
Sideshift Travel (cm) 26" (66)
DEMOLITION
AVAILABLE FOR: SSV65 / SSV75 / SVL65-2 / SVL75-2 / SVL97-2
Number of Picks 26 34 30 48 60
Our Road Saws utilize a Depth indicator makes Min. Hydraulic Flow (Lpm) 24 gpm (90)
ground-engaging frame, it easy to know depth
Max. Hydraulic Flow (Lpm) 42 gpm (159)
which provides accurate of cut being made.
Min. Pressure (MPa) 2,000 psi (13.8)
depth of cut and control.
Max. Pressure (MPa) 5,000 psi (34.4)
CE ATTACHMENTS KUBOTA.CA 31
TH35 TILT HITCH
AVAILABLE FOR: SSV65 / SSV75 / SVL65-2 / SVL75-2 / SVL97-2
HITCHES
SH35
The automatic lock on lower
Hitch Standard category 1 & 2,
3-point arms allows driver to 3-point with adjustable top hitch
stay in the seat when hook- Weight (kg) 225 lbs (102)
ing up to an implement.
Overall Width (m) 46-7/8" (1.19)
SNOW TOOLS
AVAILABLE FOR: SSV65 / SSV75 / SVL65-2 / SVL75-2 / SVL97-2
well as moving snow. Weight (kg) 1,345 lbs (610) 1,440 lbs (653)
6-Way Blade Adjustment Top of hitch plate tilts forward or backward. Blade angles
left or right. Blade tilts clockwise or counterclockwise.
Hydraulic adjustment Max. Blade Angle 30º Left and 30º Right
provides for quick and Max. Blade Tilt 10º Clockwise and counterclockwise
easy blade positioning
Cylinder Size (cm) 3-1/2" (8.9) Bore x 8" (20) stroke
and adjusts 6-ways to
Max. Hydraulic Pressure (MPa) 3,500 psi (24.13)
meet operator needs.
Moldboard Thickness (mm) 3/8" (10)
ensure a level cut. Cutting End (cm) 3/4" x 8" x 8-1/2" (1.9x20.3x21.6)
Edges
(cm) 3/4" x 8" x 66" 3/4" x 8" x 78"
Center (cm)
(1.9 x20.3x1.68) (1.9 x20.3x1.98)
CE ATTACHMENTS KUBOTA.CA 33
TE35 TRIP EDGE BLADES
SNOW TOOLS
Working Straight
96" (2.44) 108” (2.74)
Width Across (m)
At 30° Angle
83" (2.11) 93” (2.36)
(m)
22° Blade oscillation Weight w/o Options (kg) 1,114 lbs (505.3) 1,134 lbs (514.4)
helps the blade maintain Hitch Mounting Steps Serrated
contact while going over Moldboard Construction (mm) 7 Ga. (4.6) Steel
uneven surfaces.
Moldboard Height (cm) 30" (76.2)
Cutting Edge Options (cm) 5/8" (16 mm) x 8" (20.3) high carbon steel
1" (2.5 x 8" (20.3) ultra-high-molecular-weight
Radiused blade rolls snow polyethylene (UHMW)
more efficiently, while Cutting edges are reversible and replaceable
providing 30° of angle. Trip Edge Blade Protection Adjustable spring-loaded, trip edge
SNOW TOOLS
AVAILABLE FOR: SSV65 / SSV75 / SVL65-2 / SVL75-2 / SVL97-2
CE ATTACHMENTS KUBOTA.CA 35
SNOW BLOWERS
SNOW TOOLS
Hydraulically operated
chute rotation with sprocket
drive allows operator to
change direction of snow
discharge from the seat.
SNOW TOOLS
AP-SBL2566 AP-SBL2574 AP-SBL842410HH K66247HB K76249HB K76249HH K842611HH
Max. Operating Pressure 3500 psi 3500 psi 3500 psi 3271 psi 3000 psi 3600 psi 3600 psi
Operating weight 816 lbs 938 lbs 988 lbs 767 lbs 767 lbs 1160 lbs 1644 lbs
Skid Shoes Replaceable and Adjustable Yes, 5 positions Yes, 6 positions Yes, 7 positions
CE ATTACHMENTS KUBOTA.CA 37
AB ANGLE BROOMS
ATTACHMENTS
• Replaceable hex drive system Overall Width (m) 81 1/2" (2.07) 93 1/2" (2.37)
• Poly, wire, or combination bristles Overall Height (cm) 33" (83.8) 33" (83.8)
• Optional dust suppression system with 25 gallon tank
2 Straight Poly
2 Straight Poly
Angle Brooms are ideal for construction Wafers
Wafers
34 Convoluted
Wafers
40 Convoluted Wafer
site cleanup, road maintenance, light Wafers
snow removal on paved surfaces, Sweeping Width (m) 72" (1.83) 84" (2.13)
and cart path maintenance. Sweeping Width @ 30° Max. Angle (m) 65" (1.65) 76" (1.93)
of the unit for safer and unencumbered operation. Hydraulic gpm Range (lpm) 12-30 gpm (45.4-113.6)
ATTACHMENTS
AVAILABLE FOR: SSV65 / SSV75 / SVL65-2 / SVL75-2 / SVL97-2 HB74 HB84
Weight of Base Unit w/Brush (kg) 1,252 lbs (568) 1,369 lbs (621)
• Heavy-duty bucket design – 3/16" shell
Gutter Broom (kg) 101 lbs (46) 101 lbs (46)
• Bucket tapered front to back to hold material in
Optional
• 26" Replaceable brush Weights
Dust Suppression (kg) 194 lbs (88) 206 lbs (93)
This large, tapered, heavy-duty collection bucket offers Overall Height (m) 46" (1.17) 46" (1.17)
Min. Hydraulic Flow Required (lpm/mPa) 12 gpm (45) @ 2000 psi (13.8)
Max. Hydraulic Flow Required (lpm/mPa) 12 gpm (45 ) @ 2000 psi (13.8 )
The heavy-duty bucket offers a Max. Hydraulic Pressure Rating (mPa) 3500 psi (24.1)
3/16" shell, and is tapered front Broom Speed Range 100-230 rpm
to back to help hold in material. Hydraulic Rotor Drive Motor Single motor drive standard
The heavy-duty metal top offers
Bucket Shell Thickness (mm) 3/16" (4.8)
bump protection to take on the
Bolt-on Cutting Edge (cm) Standard 5/8" x 8" (1.6x20.3)
day-to-day use of construction sites.
Broom Hood Thickness (mm) 12 ga. Sheet metal (2.6)
Optional dust suppression kit is available.
Optional Water Tank Capacity (L) 25 gal. (95)
CE ATTACHMENTS KUBOTA.CA 39
SD96 SILAGE DEFACER
ATTACHMENTS
SD96
Closed drive system prevents material
Overall Width (cm) 99-1/4" (252)
from interfering with the drive system.
Working Width (cm) 90-5/8" (228.6)
ATTACHMENTS
STP25: AVAILABLE FOR: SSV65 / SSV75 / SVL65-2 / SVL75-2 / SVL97-2
STP25
Weight (kg) 316 lbs (143.3)
without push bar
Jaw Teeth (cm) Laser cut from 3/4" (1.9) high strength steel
Construction
Tips Angled for digging
Optional push bar keeps Angled jaw tips aide Hydraulic Cylinder (cm) 2” x 8” 1-1/8” (5.1x20.3x2.9)
Welded hydraulic cylinder
limbs away from the cab to in digging roots and
Hydraulic Cylinder
protect the operator. loosening soil around the Greasable
Pivot Pins
base of trees. Cylinder Guards (cm) 3/16” (5) Welded steel plate
CE ATTACHMENTS KUBOTA.CA 41
CL COMPACT BUCKETS
COMPACT ATTACHMENTS
ATTACHMENTS
STANDARD CAPACITY
AVAILABLE FOR: SCL1000 CL136L CL242L
Hitch CII Hitch 2-Lever Hitch
• CL136L / CL142L Standard 36” or 42” Bucket: Bucket Width (cm) 36" (91)
• CL236L / CL242L Standard 36” or 42” Bucket: Shell (mm) 3/16" (4.7)
- Two lever Quick-Attach Optional Teeth or Edge Bolt-on Edge (HC Model)
6 Bolt-on Teeth (HT Model)
• CL148H High Capacity 48” Bucket:
Struck Capacity (m3) 3.8 cu.ft.(.11) 4.9 cu.ft. (.14)
- Available with bolt-on edge or bolt-on teeth
Heaped Capacity (m3) 4.9 (.14) 6.5 (.18)
- CII hitch
• CL248H High Capacity 48” Bucket:
HIGH CAPACITY
- Available with bolt-on edge or bolt-on teeth
CL148H
Hitch CII Hitch
COMPACT ATTACHMENTS
ATTACHMENTS
AVAILABLE FOR: SCL1000
CPF1236 CPF1242
Weight (kg) 224 lbs (102) 234 lbs (106)
Lift Capacity (kg) 1200 lbs (544) lift capacity is based on load being
24" (61 cm) from vertical face of fork
Fork Class I
CE ATTACHMENTS KUBOTA.CA 43
CSR10 COMPACT POWERED RAKE
COMPACT ATTACHMENTS
ATTACHMENTS
Hydraulic Flow
20 gpm max. continuous
Requirements
COMPACT ATTACHMENTS
ATTACHMENTS
AVAILABLE FOR: SCL1000
• Chain widths on 30”/36” units: 4”, 6”, 8” & 10” Overall Length (cm) 62" (157) 72" (183) 85" (216)
• Chain widths on 48” unit: 4” & 6” Digging Depth at 60° 30" (76) 36" (91) 48" (123)
Roller Guide Bearing at Boom Head Sealed, ball bearings with triple lip seals
& metal shroud covers
Chain Speed @15 gpm 638 fpm (high torque) / 1105 fpm (high speed)
CE ATTACHMENTS KUBOTA.CA 45
CSA10 COMPACT SKID AUGERS
COMPACT ATTACHMENTS
ATTACHMENTS
Number of Auger Teeth (cm) Hex Head Double Augers Hex Head Tree Augers Rock Augers
Landscapers and contractors will 6" (15.2) – 2 teeth 24" (61) – 9 teeth 6" (15.2) – 6 teeth
find the CSA10 is a durable tool for
9" (22.9) – 4 teeth 9" (22.9) – 10 teeth
12" (30.5) – 4 teeth 12" (30.5) – 12 teeth
digging holes for footings, fences, 15" (38.1) – 5 teeth
18" (45.7) – 6 teeth
signs, or trees. 24" (61) – 8 teeth
Auger Pilot Cast steel, 3 – drill points Cast steel, 4 – drill points
provides added strength. Gearbox Output Shaft (cm) 2" (5.1) Hex
COMPACT ATTACHMENTS
ATTACHMENTS
AVAILABLE FOR: SCL1000
CE ATTACHMENTS KUBOTA.CA 47
Kubota.ca