Professional Documents
Culture Documents
13.10.2022-11394AM-22 - 350 Atm Well Drilling Equipment For New Casing Construction of Guneshli 25 and 27 Wells
13.10.2022-11394AM-22 - 350 Atm Well Drilling Equipment For New Casing Construction of Guneshli 25 and 27 Wells
2
II. The original bank guarantee must be submitted in a sealed envelope on the date of commercial envelope opening.
Otherwise, the procurement authority reserves the right to reject such an offer.
III. Persons wishing to participate in the procurement tender must notify the coordinator in advance and receive
portability, although it is advisable to provide other types of guarantees (such as letters of credit, securities,
invoices, transfer of funds to a special account, deposits and other financial assets).
IV. The amount of the advance payment will be at least equal to the prepayment amount. Up to 30% advance payment
is envisaged by the Purchasing Organization for the current purchase transaction . It should be noted that bank
guarantees issued by foreign (non-resident) banks, regardless of the country of registration of the bidding company,
must be provided through the International Bank of Azerbaijan (IBA). Otherwise, the bidder's proposal will not be
accepted. Bank guarantees provided by local banks are not required to be issued through the IBA. Issuance of bank
guarantees through the IBA applies only to the guarantee of advance payment and the contract performance
guarantee.
V. Performance bank guarantee is required in the amount of 5 (five) percent of the contract price.
VI. The financial institution that gives bank guarantee (or other type of bond), shall be acceptable in Azerbaijan
Republic and/or international financial operations. The Purchasing Organization reserves the right to not accept non
reliable bank guarantees (bonds).
VII. The Procuring entity is expected to pay up to 30% of the advance payment on the current procurement transaction.
3
The procurement group of the PU “Azneft”, SOCAR
___________No.
Attn.: _______________,
Hereby we,[full name of the applicant consignor (Contractor) is specified ]confirm the intent of
participation in an open competition number 11394AM-22 announced by SOCAR PU “Azneft”,,
for purchasing of 350 atm well drilling equipment for new casing construction of Guneshli 25 and
27 wells
At the same time, we confirm the absence of any cancellation or bankruptcy procedures, activity
interruption in relation to [ full name of the applicant consignor (Contractor) is specified ] or any situation
making it’sparticipationimpossible.
We kindly ask You to send the soft copy of an invitation to bid to the following e-mail
address:____________________.
(name, surenmae, duty) will represent our company in the bid.
The contact information for propmtly responding the queries relating the documents submitted
by us and other issues:
Contact person: _______________________________
Position of the contact person: ____________________
Phone number: ________________________________
Fax: ________________________________________
E-mail address: ________________________________
Appendix:
7. Original of the bank document on payment of the participation fee – __ pages.
________________________________ _______________________
(name, surname, patronymic of the responsible person) (signature of responsible person)
_________________________________
4
(position of responsible person)
The list, description and technical requirements of the well completion equipment required for
the completion and development of Guneshli wells 25 and 27, which will be drilled in 2022 in the
Gunashli field operated by Azneft PU “28 May” OGPD, are shown in Table 1.
The well completion equipment to be procured was selected taking into account the geo-
physical characteristics of the formation, technical and technological parameters of the well, and
the operating environment given in the table below.
Well Information
1 Field Gunashli
3 Air temperature -5 ° C - + 44 ° C
5 Formation temperature 72 ° C
2 Well profile and maximum zenith angle Inclined, J-shaped, deviation 1200mtr, angle 15-17deg
5
9 5 \ 8 ”(40ppf) - and 7” (29ppf) suspension strap
Stand
No Description UOM QYT
ard
PCS
1 Operating temperature: 70 ° C 3
14A
Connection type: coupling (box x pin)
Thread size and type: 4 1 \ 2 ”17ppf TMK UP (or if there is an analogue, it
must be provided with appropriate conductors)
Material: Steel alloy (1.26% CO2 resistant)
Strength limit: ≥110000psi
Depth to be installed: 70 - 130 meters
The hydraulic bypass valve will be released with a 4 ½ ”NKB PCS
Activation method: by applying pressure to the hydraulic, annular space APİ
Activation pressure: ≥60-70atm
19AC
Working pressure: 350atm
2 Connection type: coupling (box x pin) 3
Thread size and type: 4 1/2 ”17ppf TMK UP (or if there is an analogue, it
must be provided with appropriate conductors) APİ
Inner diameter: ≥ 2.5 ” 11D1
Material; Steel alloy (1.26% CO2 resistant)
Strength limit: ≥110000psi
6
Packer - 9 5/8 ”x 4 ½” hydraulic type, removable service pack (must be PCS
equipped with NKB-compliant conductors if required)
Working pressure: 350atm
Operating temperature: 80 ° C APİ
Activation method: hydraulic, by creating excess pressure inside the pipe
19AC
Reliability level set by the manufacturer: V1 or V0
3 Outer diameter: ≤ 8.6 ”(9 5/8” will be used inside the 40ppf belt) 3
Inner diameter: ≥ 2.4 ”
Sealing element material: HNBR and higher APİ
Thread combination (top): TMK UP PF 4 1/2 "17ppf box 11D1
Thread combination (bottom): TMK UP PF 4 1/2 "17ppf pin (or analog)
should be provided with appropriate conductors, if any)
Material: Steel alloy (1.26% CO2 resistant)
Strength limit: ≥110000psi
Nippel set (No-Go type Landing Nipple), with spare parts (spare kit for lock PCS
mandrel and prong)
Activation method: by means of wing technique
Activation tool: a special set of "locks" and "plugs" APİ
Working pressure: 350atm 19AC
Working temp: 80 ° C
4 Connection type: coupling (box x pin) 3
Thread size and type: 2 7/8 ”8.6ppf TMK UP (or if there is an analogue, it
must be provided with appropriate conductors) APİ
Internal profile and size: RN type, 2.125 ” 14L
Outer diameter: XD≤ 3.9 "
Material: Steel alloy (1.26% CO2 resistant)
Strength limit: ≥110000psi
7
Control pipe (for shut-off valve)
Production method: without welding (show)
Working pressure: 350atm and above
Diameter: 1/4 ”
ASTM
meters
Wall thickness: minimum 0.06 ”
7 440
Joint type: High pressure fittings (Packer / Swagelok fittings or analog with A312
metal-to-metal sealant)
Material: SS 316L steel or better stainless steel)
Length: minimum 220 mtr / drum
Supply form: drum
Valve, Needle valve 1/4 ”NPT FxF, 10000psi (UN2NS-1M or analogue),
for use in the control line of the shut-off valve API
PCS
8
Working pressure: ≥420atm 4
6D
Working environment: sea conditions, outdoors
Body material: SS-316L
Connecting fittings ¼ ”NPT, fitting adapters (PARKER or analog) to
connect the control pipe to the wellhead equipment (wellhead hanger
packer, quadrant and valve) and to the wellhead equipment (shut-off
valve)
set
10 ASME
1 NPT male connector, 316SS, 1/4 "A-Lok x 1/4" MNPT (4MSC4N)
1 NPT male connector, 316SS, 1/4 "A-Lok x 1/2" MNPT (4MSC8N) B31.1
1 NPT female connector, 316SS, 1/4 "A-Lok x 1/8" MNPT (4FSC2N)
1 NPT female connector, 316SS, 1/4 "A-Lok x 1/4" MNPT (4FSC4N)
1 NPT female connector, 316SS, 1/4 "A-Lok x 1/2" MNPT (4FSC8N)
1 piece 1/4 "ferrule set (minimum 6pcs of front & back) (4ALOK-316SS-
SET)
Linear joints, for extension of 1/4 ”control pipe (Spir Star / Packer or
analogue)