The document summarizes the dialing settings for an FXO PSTN gateway including:
1. It allows configuring wait time for dial tone, dialing method (1 or 2 stage), and minimum delay before dialing out on a per port basis.
2. It supports port scheduling using round-robin or flexible schemas and allows specifying a port prefix for 1 stage dialing.
3. Other dialing settings include hookflash duration, DTMF transmission method and settings, and dial pause between digits on a per port basis.
4. An outgoing call dial plan grammar can be defined to allow or block numbers and customize number translations on outbound calls.
The document summarizes the dialing settings for an FXO PSTN gateway including:
1. It allows configuring wait time for dial tone, dialing method (1 or 2 stage), and minimum delay before dialing out on a per port basis.
2. It supports port scheduling using round-robin or flexible schemas and allows specifying a port prefix for 1 stage dialing.
3. Other dialing settings include hookflash duration, DTMF transmission method and settings, and dial pause between digits on a per port basis.
4. An outgoing call dial plan grammar can be defined to allow or block numbers and customize number translations on outbound calls.
The document summarizes the dialing settings for an FXO PSTN gateway including:
1. It allows configuring wait time for dial tone, dialing method (1 or 2 stage), and minimum delay before dialing out on a per port basis.
2. It supports port scheduling using round-robin or flexible schemas and allows specifying a port prefix for 1 stage dialing.
3. Other dialing settings include hookflash duration, DTMF transmission method and settings, and dial pause between digits on a per port basis.
4. An outgoing call dial plan grammar can be defined to allow or block numbers and customize number translations on outbound calls.
(Syntax: rr: port_group; [...]; Default: rr:1-8; round-robin of all ports )
Prefix to Specify Port: 00000 (1 stage dial, default 99)
(Syntax: prefix# + ch# + dialing# will request the ch# per call. Note that this code has to prefix dialplan number and prefix doesn't impact round- robin) Use SIP User Account Scheduling: No Yes (Note that Yes disables above 2 scheduling, which is not recommanded)
Dial DTMF Settings
ch1-4:60; (10-200, Hookflash Duration (X10ms): default 60) Use DTMF via RFC2833/SIP Info: Yes No (Default Yes, No-use following settings) ch1-4:10; (10-200, Digit Length(X10ms): default 10) ch1-4:-11; (-31-0, default Digit Volume(dB): -11) ��1-4:d*p10 (syntax ch1- Dial Pause Between Digit: 4:d[]p[]) (Each Digit(X10ms): pause 10p ms after d-th digit, d=[1,32], p=[10,6000], default 100ms pause won't show)
Dial Plan (1 Stage Dial Only)
Outgoing Call Dial Plan: {[*x]+}
1. Accept Digits: 1,2,3,4,5,6,7,8,9,0,*,#,A,a,B,b,C,c,D,d 2. Grammar x - any digit from 0-9; : xx+ - at least 2 digit number; ^ - exclude; T - timer; [3-5] - any digit of 3, 4, or 5; [147] - any digit 1, 4, or 7; <2=011> - replace digit 2 with 011 when dialing WARNING - illegal input will fall back to default 3. Example 1: {[369]11 | 1617xxxxxxx} - Allow 311, 611, 911, and any 10 digit numbers of leading digits 1617 Example 2: {^1900x+ | <=1617>xxxxxxx} - Block any leading digits 1900 and add prefix 1617 for any dialed 7 digit numbers Example 3: {1xxx[2-9]xxxxxx | <2=011>x+} - Allow any length of number with leading digit 2 and 10 digit-numbers of leading digit 1 and leading exchange number between 2 and 9; If leading digit is 2, replace leading digit 2 with 011 before dialing Example 4: { [x#]+ | [x*]+ } - Allow any length of number with leading * or #
4. Default : PSTN Outgoing Call - {x+}
5. Dial Pause: Dial pause between digits looks like 'ch1-4:d2p200,d4p100', where dx/py-means pause 10y-ms after d-th digit is dialed. Note that pause value has a multiplier of 10 and default 100ms pause for all digits are not shown.
Save Cancel
All Rights Reserved Grandstream Networks, Inc. 2004-2012