Professional Documents
Culture Documents
Specification 504 Rev. 2 - Standard Pipe Supports-2
Specification 504 Rev. 2 - Standard Pipe Supports-2
This specification covers the requirements for the design and fabrication of pipe supports for
GSEPN projects.
2.0 REFERENCES
The following publications form a part of this specification. Unless otherwise specified herein,
use the latest edition.
General Specifications:
501 Piping Design
502 Pipe, Fittings and Valves
525 Painting and Coating
3.0 GENERAL
Pipe supports detailed in the attached drawings shall be used for all GSEPN projects. The use
of pipe supports marked as ‘not preferred’ shall be avoided if at all possible. The designer should
note that some supports require welding of support materials to the pipe, this welding should
be carried out by the piping contractor and not the support fabricator as most pipes and
therefore the welding on them, are subject to PED. The designer shall therefore add any required
support materials to be welded to pipe on the isometrics.