Professional Documents
Culture Documents
Product Information
IGNITION POWER SWITCH
BIP350 Power Switch – BIP350
Ignition
Current limiting bipolar ignition driver with low The bipolar triple stage darlington BIP350 especially
saturation voltage developed to drive an ignition coil in automotive ignition
circuits can be driven by standard CMOS logic. The
rugged bipolar process assures safe operation in
automotive specific environment even under harsh
Customer benefits: conditions. The excellent quality of the concept - chip
Excellent system know-how design and plastic packaging - has been proven in the
Smart concepts for system safety field over 10 million times. Due to the ESD performance,
Secured supply typical for HV-bipolar devices special precautions during
Long- term availability of manufacturing processes manufacture or operation are unnecessary.
and products
QS9000 and ISO/TS16949 certified
The BIP350 has an active voltage clamp between
collector and emitter. It is temperature compensated
with an accuracy of about ±30 V in the entire
temperature range. In order to protect the ECU, the wire
Features
harness, the coil and the ignition driver the collector
Triple stage darlington designed for automotive
current is limited to typ. 11 A at long dwell times. Using
ignition application
Driven by standard CMOS logic with very low power a virtual sense concept a low saturation voltage of less
consumption in the driving circuit than 2 V at 7 A in the entire temperature range will be
Input protected against VBAT obtained.
Internal CE voltage clamp, temperature
compensated
Collector current limiting circuit
Low saturation voltage (<2 V at 7 A in the entire
temperature range)
Integrated capacitors for oscillation free operation
Package: D2PAK (TO220 optional)
1
Block diagram Maximum ratings
VBat
L=4mH
RL=0,5Ω
ton IC
+5V
IB
BIP350
RV
PIN configuration
C
E
C E
B B
Collector (Flange) Collector (Flange)
2
Electrical characteristics
Contact
© 03/2006 All rights reserved by Robert Bosch GmbH including the right to file industrial property rights
Robert Bosch GmbH retains the sole powers of distribution, such as reproduction, copying and distribution.
For any use of products outside the released application, specified environments or installation conditions no warranty shall apply and
Bosch shall not be liable for such products or any damage caused by such products.