The document describes a communications laboratory experiment involving amplitude modulation. A carrier signal of 5cos(2π108t) is modulated by a baseband signal of cos(2π103t) + cos(6π103t), resulting in a modulated signal. The baseband frequency is 103 Hz. The modulated signal and required demodulator circuit are to be drawn, including all relevant frequency values.
The document describes a communications laboratory experiment involving amplitude modulation. A carrier signal of 5cos(2π108t) is modulated by a baseband signal of cos(2π103t) + cos(6π103t), resulting in a modulated signal. The baseband frequency is 103 Hz. The modulated signal and required demodulator circuit are to be drawn, including all relevant frequency values.
The document describes a communications laboratory experiment involving amplitude modulation. A carrier signal of 5cos(2π108t) is modulated by a baseband signal of cos(2π103t) + cos(6π103t), resulting in a modulated signal. The baseband frequency is 103 Hz. The modulated signal and required demodulator circuit are to be drawn, including all relevant frequency values.
Q. In a communication laboratory, you have a SSB-SC modulator, where
an output of available function generator is 5𝑐𝑜𝑠(2𝜋108 𝑡) is used as a carrier signal. If the base-band signal (m(t)) is [𝑐𝑜𝑠(2𝜋103 𝑡) + 𝑐𝑜𝑠(6𝜋103 𝑡)], answer the following: 1- What is the baseband frequency? 2- Sketch the spectral of the message signal. 3- Find the modulated signal. 4- Sketch the spectral of the modulated signal. 5- Draw the block diagram of the coherent demodulator and list all the frequencies of the equipment’s on the drawing. 6- Derive the final output of the demodulator based on your drawing stages.