Professional Documents
Culture Documents
SPECIFICATIONS
ROUGH TERRAIN CRANE
MAXIMUM CAPACITY 20,000 kg at 2.5 m TADANO Automatic Following information is displayed:
PERFORMANCE Moment Limiter • Control lever lockout function with audible and
Max. traveling speed 54 km/h (TADANO AML-E) visual pre-warning • Number of parts of line
Gradeability (tan ) 66% (at stall), 57%* • Boom position indicator
* Machine should be operated within limit of engine • Outrigger state indicator • Slewing angle
crackcase design. (30º: Cummins QSB6.7-4C) • Boom angle / boom length / jib offset angle / jib
WEIGHT length / load radius / rated lifting capacities / actual
Gross vehicle mass 19,960 kg loads read out • Potential lifting height
-front axle 9,980 kg • Ratio of actual load moment to rated load moment
GR-200EX
-rear axle 9,980 kg indication • Permissible load
MIN. TURNING RADIUS 10.4 m (2-wheel steering), 5.7 m (4-wheel steering) • Automatic Speed Reduction and Slow Stop function
(at center of extreme outer tire) on boom elevation and slewing
BOOM 6-section full power partially synchronized • Working condition register switch
telescoping boom. • Load radius / boom angle / tip height / slewing
Fully retracted length 6.5 m range preset function
Fully extended length 27.5 m • External warning lamp
Extension speed 21.0 m in 71 s • Tare function • Main hydraulic oil pressure
-9º–82.5º • Fuel consumption monitor
20 METRIC TON CAPACITY
Angle
Elevation speed -9º to 82.5º in 30 s • Drum rotation indicator (audible and visible type)
JIB 2-staged under slung boom extension; main and auxiliary winch • On-rubber indicator
Single sheave at jib head. OUTRIGGERS 4 hydraulic, beam and jack outriggers. Vertical jack
Offset 5º– 60º(by offset cylinder) cylinders equipped with integral holding valve. Each
Length 4.5 m and 6.9 m outrigger beam and jack is controlled independently
MAIN WINCH Variable speed type with grooved drum driven by from cab.
hydraulic axial piston motor. Extension width Max. ... 5,200 mm, Mid. ... 4,800 mm, 4,400 mm, 3,200 mm
Single line pull
Single line speed
28.4 kN {2,900 kgf}
120 m/min. (at 5th layer) CARRIER
Min. ... 1,790 mm, Float size (Diameter)... 400 mm
Rear engine, right-hand drive, driving axle 2-way
Australian
Wire rope 14.0 mm x 155 m (Diameter x length) selected type by manual switch. model
AUXILIARY WINCH Variable speed type with grooved drum driven by 4 x 2 front drive, 4 x 4 front and rear drive.
hydraulic axial piston motor. ENGINE Model... Cummins QSB6.7-4C
Single line pull 31.4 kN {3,200 kgf} EU)StageIV
Single line speed 110 m/min. (at 3rd layer) Type... 4-cycle, turbo charged and after cooled,
Wire rope 14.0 mm x 85 m (Diameter x length) direct injection diesel.
SLEWING Piston displacement... 6.69 liters
Slewing speed 2.6 min-1 {rpm} Bore x stroke... 107 mm x 124 mm
Tail slewing radius 2,390 mm Max. output... 175 kW at 2,300 min-1 {rpm}
HYDRAULIC SYSTEM Pumps... 2 variable piston pumps for crane functions. Max. torque... 888 N•m at 1,500 min-1 {rpm}
Tandem gear pump for steering, slewing TRANSMISSION Electronically controlled full automatic transmission.
and optional equipment. STEERING Hydraulic power steering controlled by steering wheel.
Control valves... 4 steering modes available: 2 wheel front, 2 wheel
Electrically controlled multiple hydraulic rear, 4 wheel coordinated and 4 wheel crab.
valves with integral pressure relief valves. SUSPENSION Front: Semi-elliptic leaf springs with hydraulic lockout device.
Reservoir... 285 liters capacity. External sight level Rear : Semi-elliptic leaf springs with hydraulic lockout device.
gauge. TIRES 445/80R25 (OR)
Oil cooler... Air cooled fan type. FUEL TANK CAPACITY 250 liters
0
,39
45 60 R2
25° ° °
5°
(OVERALL WIDTH)
2,450
35
MAX: 5,200
MIN: 1,790
6.
9-
m
82.5° jib
30
4.
5-
70° m
jib
60° 2
7.5 0
- 7,50
m 25 X.: 2
bo
–MA
23
o m 6 ,500
MIN.:
LIFTING HEIGHT (m)
.3- 50°
m
bo 45°
om
Ø4
00
19 40° 20
.1
- m
bo
o 35°
(OVERALL HEIGHT)
m
14
. 9- 30°
m
bo 15
o
3,200
m
10
.7-
m
b 20°
oo
m
6. 5 10
-m
10.9°
17.8°
18.3°
bo
10°
om
5 1,540
3,245 3,200 (WHEEL BASE) 1,865
6,605 (CARRIER LENGTH)
0°
8,310 (OVERALL LENGTH)
0
0 5 10 15 20 25
**In this external views, a few equipment are included.
LOAD RADIUS (m)
1 GR-200EX GR-200EX 2
5˚
Utilizing the 2-stage hydraulic offset jib increases preparation work efficiency
First in its class to adopt a 2-stage hydraulic offset jib with the first radio control
for a rough terrain crane.
This increases work efficiency while supporting safety features.
60˚
Radio control
4.5 m / 6.9 m
New
set-up
Hydraulic offset jib
Hydraulic offset jib can be adjusted between 5° to 60°
with the jib offset cylinder.
First rough terrain crane with radio control.
First time
for the rough terrain crane
6.5 m—27.5 m With the hydraulic under slung jib pared
*Optional feature
Outrigger control
Outrigger operation mode supports
outrigger extension and retraction
as well as jacking.
Hook stowage
Boom storage operation allows stowing of the hook with visual confirmation
outside of the crane.
3 GR-200EX GR-200EX 4
Optimum Design Large multi-function display
Crane cabin and equipment designed for operator comfort. The 10.4 inch color touch panel consolidates operation information and settings for
increased work efficiency and comfort. The touch panel is pressure sensitive to handle
gloved operation.
Drum indicator
Hook load
Rated lifting
capacity
Outrigger status
indicator
Operation status
Working area
Slewing position
Example)
New cabin
5 GR-200EX GR-200EX 6
HELLO-NET New
HELLO-NET is a tool that connects the crane operations with owners, their service staff and the manufacturer through satellite.
This high quality telematic tool collects data of the crane including working history, maintenance data and machine location.
HELLO-NET can be accessed by the manufacturer to assist with downtime and to help improve Tadano support services.
Satellite
communications
GPS
Ground
Work site station
Supports safety functions from a birds-eye view image of crane when your crane is operated.
Fuel consumption during standby is
automatically displayed when each control
lever and pedal is in neutral position.
Supports safety confirmation through an above-the-vehicle
image shown on the large multi-function display.
*Camera range is limited. Do not rely only on the image. Confirm safety around the Fuel consumption Average fuel
vehicle directly before driving. during standby consumption
Preset menu display Fuel consumption history display Fuel consumption history display
(during crane operation) (during crane operation) (during traveling)
Adblue® tank
Detection camera
7 GR-200EX GR-200EX 8