Professional Documents
Culture Documents
Vetotop CL531
Premixed 8 to 20 mm thick polymer modified
cementitious self-leveling underlayment
Ref: MS3-CF003-03-21
Date: 11 August 2021
Vetotop CL531
I. Store unmixed materials in a cool environment, avoid
Section A: General Considerations exposure to direct sunlight.
Tools and Equipment. II. It is very important to keep the equipment in a cool
condition.
It is suggested that the following list of equipment is adopted as a
minimum requirement.
III. Avoid application during the hottest time of the day, arrange
Equipment Equipment Description temporary shading if necessary.
Type
Protective Good quality clothes, gloves, and eye IV. Provide sufficient material and labourers to ensure a
www.saveto.com
Ref: MS3-CF003-03-21
2
Vetotop CL531
Section B: Application Instructions
1.0 Surface Preparation. 3.0 Mixing.
1.1 The surface should be sound, clean, free from loose material, 3.1 For a single bag mixing, add to the mixing container 4.25 - 5.0
grease, laitance, dirt curing compound, etc. liters of water for each 25Kg bag of Vetotop CL531.
1.2 Larger areas can be divided with wooden battens to control the 3.2 Add the powder to the water and mix with a mechanical plaster
pumping volume and determine the layer thickness to be mixer or low-speed electric drill fitted with a suitable paddle for
applied. 3 - 4 minutes until achieving a uniform, lump-free fluid
consistency.
www.saveto.com
Ref: MS3-CF003-03-21
3
Vetotop CL531
5.0 Curing.
5.1 Vetotop CL531 is self-curing; seal off the area for 1 - 3 days. The
floor becomes ready for commissioning or topping after 3-5
days.
Ref: MS3-CF003-03-21