Professional Documents
Culture Documents
B O N D
Kit components Related products
www.kuraray.de
SE Primer (6ml) CLEARFIL PORCELAIN
SE Primer is a water based 20 second BOND ACTIVATOR
self-etching primer. It’s unique
This product is mixed 1:1 with
chemistry soothes dentine and
Primer of CLEARFIL SE BOND
desensitizes immediately upon
or LINER BOND 2 V
contact.
and works as a silane
coupling agent which QUICK AND INTELLIGENT
guarantees strong
Kuraray Co, Ltd. will replace any product that is proved to be defective. Neither Kuraray Co., Ltd. nor the distributor accepts liability for any loss or damage, direct, consequential or special, arising out of the application or use of or the inability to use these products. Before using, the user will determine the suitability of the products for the intended use and the user assumes all risk and liability whatsoever in connection therewith. xxx EUL-GB 02.2000
SE Bond (5ml) adhesion to porcelain,
metal and composite
SE BOND is a 10% filled, light cured
restorations.
adhesive that has excellent elasticity,
thus reducing stress under light
cured composites during CLEARFIL AP-X
S E
S E
eliminates postoperative sensitivities.
resin, which provides accurate colour matching,
high polishability and excellent physical properties,
making it suitable for both anterior and posterior
Intelly-Case restorations as well as for cervical and root surface TM
Inventing the self-etching technique with the product
Convenient storage and single handed delivery of restorations.
NOTE: Please read CLEARFIL SE BOND Instructions for Use thoroughly before using the product. CLEARFIL SE BOND is a trade mark of Kuraray Co., Ltd. WARRANTY: All data herein are based on actual measurements performed by Kuraray Co., Ltd. All information contained herein is presented in good faith and without warranty.
both fluids is made possible with this unique box. It is formulated with the optimal viscosity for easy
handling and placement. Thanks to its consistency
CLEARFIL LINER BOND 2 back in 1993
It allows you save and
quick application and the material does not stick to normal steel or any
Kuraray Co. Ltd., Japan, has now developed a second
C L E A R F I L
C L E A R F I L
contents. generation of self-etching primer and bonding systems
previously.
Manufactured by KURARAY CO., LTD. 1-12-39 , Umeda, Kita-ku, Osaka 530-8611, JAPAN
Kuraray European Union Representative KURARAY EUROPE GmbH, Schiess Strasse 68, D-40549 Düsseldorf, eMail: dental@kuraray.de
B O N D What is Self-Etching ?
Primes dentine and cut enamel. Self-Etching is made liquid components: self-etching PRIMER and
CLEARFIL SE BOND
possible with primers that contain phosphate light-curing BOND. No mixing is required before
CLEARFIL LINER
monomers. These monomers have an acid group application. The self-etching primer simultaneously BOND 2V
that dissolves the smear layer which will be etches and conditions dentine and cut enamel. After AA
integrated into the hybridlayer, then penetrates applying the primer and allowing it to sit briefly, the BB
After 1 day at 37° C
the dentinal tubules and begins sealing and bond is then applied and light-cured. CC
After thermocycled:
desensitizing immediately. 4000 times, 4°–60° C
DD
Indications CLEARFIL SE BOND provides high bond strength to CLEARFIL SE BOND exceed those obtained when
self-etching primer is applied for 20 seconds, and
compomer restoratives as well as composite resin the restorative manufacturers’ recommended bond-
the bond light-cured for 10 seconds.
1)
restoratives. The bond strengths of compomer ing systems were used.
Only uncut enamel requires phosphoric acid etching.
CLEARFIL SE BOND is suitable for the following
restorative procedures: F2000/A
CompoglassF/
SE BOND
surfaces with the contents, which helps to prevent possible
25 20 15 10 5 0 0 5 10 15 20 25
– Intraoral repairs of fractured facing crowns made skin irritations and dermatological effects.
Tensile bond strength to bovine enamel Tensile bond strength to bovine dentine
of porcelain, hybrid ceramics or composite resin
using light-curing composite
OPTIMIZED PHYSICAL PROPERTIES Bond Strength to Human Uncut Enamel Marginal Sealing
– Surface treatment of prosthetic appliances made
of porcelain, hybrid ceramics and cured composite CLEARFIL SE BOND PRIMER and BOND both CLEARFIL SE BOND – without phosphoric acid Microleakage testing results of 15 human molars
resin contain the proven adhesive monomer MDP etching – shows bond strength to uncut enamel with V-shaped defects, restored using CLEARFIL
(10-Methacryloyloxdecyl dihydrogen phosphate), as equal to or exceeding that of a “wet bonding” SE BOND and thermocycled, are shown here. Note
used in the PANAVIA and CLEARFIL LINER BOND system. This suggests that CLEARFIL SE BOND that microleakage could not be observed in any of
series. MDP provides high bond strength and long- will perform well even if small sections of uncut the enamel interfaces, and the dentine interfaces all
term bond durability to enamel, dentine and base enamel are present. showed zero or minimum microleakage. CLEARFIL
metals. SE BOND’s exceptional marginal sealing perform-
ance translates into long-term strength and excellent
Comparison of Procedural Steps esthetics with all light-cure restorations.
PRIMER BOND RESTORATION
The following table shows the comparison of procedural steps with other bonding systems.
Self-etching system
Primer Bond
Wet-bonding system
Etching Bond
A Dispense, apply 15 sec. Wash Dry Dispense, apply 2 times, dry Light cure 10 sec.
B Dispense, apply 15 sec. Wash Dry Dispense, apply 2 times, dry Light cure 10 sec. Apply, Dry
• Apply PRIMER and leave • Apply BOND and distribute • Place composite or compomer
C Dispense, apply 15 sec. Wash Dry Dispense, apply 20 sec. Dry Light cure 10 sec.
for 20 seconds evenly with mild air flow restorative and light-cure
• Do not rinse • Light-cure for 10 seconds D Dispense, apply 20 sec. Wash Dry Dispense, apply 2 times, dry Light-cure 20 sec.
• Dry with mild air flow
E Dispense, apply 15 sec. Wash Dry Dispense, apply 20 sec. Dry Light-cure 20 sec. Apply, Dry Light-cure 20 sec.