This document summarizes the specifications of a Sinotruk ZZ3251N3241A 6x4 truck. It has a 336 HP engine and 1350Nm of torque. Key features include a 10-speed transmission, leaf spring suspension, air brakes, and a tilting cab. The truck has a 3200mm wheelbase, 2490mm width, and 3450mm height, and can carry a 20,000kg payload.
This document summarizes the specifications of a Sinotruk ZZ3251N3241A 6x4 truck. It has a 336 HP engine and 1350Nm of torque. Key features include a 10-speed transmission, leaf spring suspension, air brakes, and a tilting cab. The truck has a 3200mm wheelbase, 2490mm width, and 3450mm height, and can carry a 20,000kg payload.
This document summarizes the specifications of a Sinotruk ZZ3251N3241A 6x4 truck. It has a 336 HP engine and 1350Nm of torque. Key features include a 10-speed transmission, leaf spring suspension, air brakes, and a tilting cab. The truck has a 3200mm wheelbase, 2490mm width, and 3450mm height, and can carry a 20,000kg payload.
Model ZZ3251N3241A Engine Make: SINOTRUK Diesel: 4-stroke direct injection diesel engine Engine model: WD615.69, Euro II 6 cylinder in-line with water cooling, turbo-charging and intercooling Maximum output: 336 HP at 2200 rpm Maximum torque: 1350Nm at 1100-1600 rpm Displacement: 9.726L Bore: 126mm Stroke: 130mm Compression ratio: 17:1 Specific fuel consumption: 195g/kwh Engine oil filling quantity: 23L Cooling system filling quantity (long-term filling): 40L Thermostat with 80°C opening begin Twin cylinder air compressor Rigid fan Clutch Single-plate dry clutch, GF420,hydraulicallly operating with air assistance Transmission HW15710, 10 forward & 2 reverse Ratio: 10.73 7.98 5.91 4.38 3.29 2.45 1.82 1.35 1.00 0.75 10.45(R) Propeller Shaft Double universal joint propeller shaft Front Axle Steering with double T-cross section beam Rear Axles Pressed axle housing, central double reduction with differential locks between wheels and axles Ratio: 5.73 Chassis Frame: U-profile parallel ladder frame with section of 300x80x8 mm and reinforced subframe, all cold riveted cross members Front suspension: 12 semi-elliptic leaf springs with hydraulic telescopic double-action shock absorbers and stabilizer Rear suspension: 12 leaf semi-elliptic springs with bogie springs Steel fuel tank: 300 litre capacity with locking fuel cap, fitted to the off side of the chassis Steering ZF power steering, hydraulic steering with power assistance; Ratio: 22.2-26.2 Brakes Service brake: dual circuit compressed air brake Parking brake (emergency brake): spring energy, compressed air operating on rear wheels Auxiliary brake: engine exhaust brake Wheel & Types Rims: 8.5-20, 10 hole-steel Tyres: 11.00-20; Option: 12.00R20 Driver’s cab MAN L2000,all-steel forward control, 70° hydraulically tiltable to the front, 3-arm windscreen wiper system with three speeds, laminated windscreen with casted-in radio aerial, hydraulically damped adjustable driver's seat and rigid adjustable co-driver's seat, with heating and ventilating system, outer sun visor, adjustable roof flap, with stereo radio/cassette recorder, safety belts and adjustable steering wheel; Option: air conditioner, beacon lamp Electrics Operating voltage: 24V, negative grounded Starter: 24V, 7.5kw Alternator: 3-phrase, 28V, 1500w Batteries: 2 x 12V, 165Ah/180Ah Cigar-lighter, horn, headlamps, fog lights, brake lights, indicators and reverse light Dimensions in mm Wheel base 3200 + 1350 Front wheel track 1995 Rear wheel track 1850 Front overhang 1320 Rear overhang 1850 Approach angle (°) 20.5 Departure angle (°) 25 Overall length 7440 Overall width 2490 Overall height 3450 Cargo body size 4800 x 2300 x 1400 Weight in kg Dead weight 11890 Gross vehicle weight 33000 Loading capacity 20000 Front axle loading capacity 7000 Rear axle loading capacity 13000x2 Performance Maximum driving speed(km/h) 75 Minimum ground clearance(mm) 298 Minimum turning circle(m) 20 The manufacture reserves the right of technical alteration/change for better improvement without prior notice.