Professional Documents
Culture Documents
LTV-356T Series 201610-1139805
LTV-356T Series 201610-1139805
Revision: N
LITE-ON DCC
RELEASE
BNS-OD-FC001/A4
1. DESCRIPTION
1.1 Features
Current transfer ratio ( CTR : MIN. 50% at IF = 5mA, VCE = 5V )
High input-output isolation voltage ( Viso = 3,750Vrms )
High collector-emitter voltage ( VCEO = 80V )
Mini-flat package : 2.0mm profile : LTV-356T
Safety approval
UL 1577
VDE DIN EN60747-5-5 (VDE 0884-5) ,
CSA CA5A
CQC GB4943.1-2011/ GB8898-2011
FIMKO/DEMKO/SEMKO/NEMKO
RoHS Compliance
All materials be used in device are followed EU RoHS directive (No.2002/95/EC).
ESD pass HBM 8000V/ MM2000V/ CDM2000V
MSL class1
1.2 Applications
Hybrid substrates that require high density mounting.
Programmable controllers
System appliance, measuring instruments
1/12 BNC-OD-FC002/A4
Rev. : -
Photocoupler
LTV-356T series
2. PACKAGE DIMENSIONS
2.1 LTV-356T series
Notes :
1. 1-digit year code, Example : 2010 = A
2-digit work week ranging from ‘01’ to ‘53’
2. Factory identification mark shall be marked (W: China -CZ, X: China -TJ)
3. Rank shall be or shall not be marked.
4. “●” indicates halogen free option.
5. “4”or”V” for VDE option.
2/12 BNC-OD-FC002/A4
Rev. : -
Photocoupler
LTV-356T series
3. TAPING DIMENSIONS
3/12 BNC-OD-FC002/A4
Rev. : -
Photocoupler
LTV-356T series
Reverse Voltage VR 6 V
Input
Power Dissipation P 70 mW
o
Junction Temperature TJ 125 C
(1) Short between anode and cathode on the primary side and between collector and emitter on the
secondary side.
(2) The isolation voltage tester with zero-cross circuit shall be used.
2. For 10 Seconds
4/12 BNC-OD-FC002/A4
Rev. : -
Photocoupler
LTV-356T series
Collector-Emitter
BVCEO 80 — — V IC=0.1mA, IF=0
Output Breakdown Voltage
Emitter-Collector
BVECO 6 — — V IE=10µA, IF=0
Breakdown Voltage
VCE=5V
1. Current Transfer Ratio CTR 50 — 600 %
Collector-Emitter IF=20mA
VCE(sat) — — 0.2 V
Saturation Voltage IC=1mA
TRANSFER DC500V,
Isolation Resistance Riso 5×1010 1×1011 — Ω
CHARACTERISTICS 40 ~ 60% R.H.
IC=2mA
Response Time (Fall) tf — 3 18 µs RL=100Ω,
IC
1. CTR = × 100%
IF
5/12 BNC-OD-FC002/A4
Rev. : -
Photocoupler
LTV-356T series
6/12 BNC-OD-FC002/A4
Rev. : -
Photocoupler
LTV-356T series
6. CHARACTERISTICS CURVES (TYPICAL PERFORMANCE)
150
40
30 100
20
50
10
0 0
-55 0 25 50 75 100 125 -55 0 25 50 75 100 125
o o
Ambient temperature Ta ( C) Ambient temperature Ta ( C)
O
Ta= 25 C o
Ta= 75 oC
5 200 50 C 25o C
o
Forward current IF(mA)
0C
100 o
4 -25 C
50
3
20
2 10
VCE (sat) (V)
5
1
2
0 1
0 5 10 15 0 0.5 1.0 1.5 2.0 2.5 3.0
Forward current IF(mA) Forward voltage VF(V)
IF= 30mA o
TA = 25oC180 Ta= 25 oC 25mA Ta= 25 C
Current transfer ratio CTR (%)
160 40
Collector current Ic (mA)
VCE = 5V
140
1 20mA
120 30
100 15mA Pc(MAX.)
80 20
0.1 60 10mA
40 10
20 5mA
0 0
0.01 1 2 5 10 20 50 0 1 2 3 4 5 6 7 8 9
0.1 1Forward current IF(mA)
10 100 Collector-emitter voltage VCE(V)
IF - Forward Current - mA
7/12 BNC-OD-FC002/A4
Rev. : -
Photocoupler
LTV-356T series
IF = 5mA,
1 IC= 1mA
VCE = 5V 0.08
TA = 25oC
0.8 100
0.06
0.6
0.04
0
0 0 20 40 60 80 100 120
-60 -40 -2020 0 40 20 60 40 80 60 100 80 120100 120 o
oC
Ambient temperature Ta ( C)
TA - Ambient TemperatureTa- ( C)
Ambient temperature
o
Fig.9 Collector Dark Current vs. Fig.10 Response Time vs. Load
Ambient Temperature Resistance
10000 500
VCE= 20V VCE= 2V
Collector dark current ICEO (nA)
50 tr
20 tf
100 10 td
5
2 ts
10
1
0.5
1 0.2
20 40 60 80 100 120 0.05 0.1 0.2 0.5 1 2 5 10
o
Ambient temperature Ta ( C) Load resistance RL (k )
Vcc Input
VCE= 2V Output
IC= 2mA Input RD RL Output 10%
o
0 Ta= 25 C
Voltage gain Av (dB)
90%
td ts
100Ω
tr tf
10
RL= 10kΩ 1kΩ
Test Circuit for Frequency Response
Vcc
20 RD RL
Output
8/12 BNC-OD-FC002/A4
Rev. : -
Photocoupler
LTV-356T series
7. TEMPERATURE PROFILE OF SOLDERING
7.1 IR Reflow soldering (JEDEC-STD-020C compliant)
One time soldering reflow is recommended within the condition of temperature and time profile shown below. Do not solder more than three
times.
Preheat
Soldering zone
20 sec
Ramp-up TP 260 C
TL 217 C
Temperature ( C)
25 C
60 ~ 120 sec Time (sec)
ts (Preheat)
9/12 BNC-OD-FC002/A4
Rev. : -
Photocoupler
LTV-356T series
Temperature: 260+0/-5˚C
Time: 10 sec.
Temperature: 380+0/-5˚C
10/12 BNC-OD-FC002/A4
Rev. : -
Photocoupler
LTV-356T series
Unit: mm
11/12 BNC-OD-FC002/A4
Rev. : -
Photocoupler
LTV-356T series
9. NAMING RULE
LTV- 356T-(1)-(2)-G
DEVICE PART NUMBER
Example : LTV-356T-TP-A-G
Example : LTV356TTPA-V-G
10. NOTES
LiteOn is continually improving the quality, reliability, function or design and LiteOn reserves the right to make changes
without further notices.
The products shown in this publication are designed for the general use in electronic applications such as office automation
equipment, communications devices, audio/visual equipment, electrical application and instrumentation.
For equipment/devices where high reliability or safety is required, such as space applications, nuclear power control
equipment, medical equipment, etc, please contact our sales representatives.
When requiring a device for any ”specific” application, please contact our sales in advice.
If there are any questions about the contents of this publication, please contact us at your convenience.
The contents described herein are subject to change without prior notice.
Immerge unit’s body in solder paste is not recommended.
12/12 BNC-OD-FC002/A4
Rev. : -
Mouser Electronics
Authorized Distributor
Lite-On:
LTV-356T LTV-356T-D LTV-356T-C LTV-356T-A LTV-356T-B