Professional Documents
Culture Documents
LMT - 1801 Lasershutter DB
LMT - 1801 Lasershutter DB
LS-200
Main features
● Gravity close blade
A SIL3 dual version is also available which, when correctly Power ratings
wired with the Lasermet Interlock Controller System can
The standard LS-200 shutter using a stainless steel blade
provide a safety interlock which meets Safety Integrity
is rated to sustain a 100W laser that has a beam
Level 3 to EN 61508 and ISO 13849-1 Performance Level
diameter of 10mm. This is suitable for use with the air
‘e’.
cooled beam dump shown. Users must ensure the
The shutter has a Ø50mm aperture. external beam dump can absorb and dissipate the laser
power.The PEL ratings are shown overleaf.
Beam dump
Mounting 2 x M6 threads, T-Nuts supplied
port
Power Supply 24VDC shutter
Current Closed: 40mA Entry port
Opening: 210mA
Open: 110mA
User Controls Open, Close
LED Indications Power, Open, Closed
Operating Time Fully Open 800ms
Fully Closed 200ms
Power Density
Beam dump specification
Typically the LS-200 standard shutter using a stainless
steel blade can handle 100W based on a 10mm beam The beam dump is a separate item.
diameter.
An air cooled beam can be ordered or a water cooled
The PEL ratings below are for a standard stainless steel beam dump system can be ordered depending on the
blade. cooling requirements.
Laser 2000 GmbH Laser 2000 SAS Laser 2000 SAS Laser 2000 SAS Laser 2000 GmbH
82234 Wessling 78860 St-N. l. Bretèche 33600 Pessac 28034 Madrid 112 51 Stockholm
Tel. +49 8153 405-0 Tel. +33 1 30 80 00 60 Tel. +33 5 57 10 92 80 Tel. +34 617 308 236 Tel. +46 8 555 36 235
info@laser2000.de info@laser2000.fr info@laser2000.fr info@laser2000.es info@laser2000.se
www.laser2000.de www.laser2000.fr www.laser2000.fr www.laser2000.es www.laser2000.se