Professional Documents
Culture Documents
• The Report (at the time of submission) should have the following page margins:
Top edge : 30 to 35 mm
Right side : 20 to 25 mm
• The Report should be prepared on good quality white paper preferably no lower than 80gsm.
• Tables and figures should be prepared on good quality paper preferably not lower than 80gsm.
• Tables and figures should conform to the margin specifications. Large size figures should be
photographically or otherwise reduced to the appropriate size before insertion.
BINDING SPECIFICATIONS
• Project report should be hard bound in good quality.
• Name of the student, batch and title of the project must be printed at the side of the report, on the
cover.
FORMATTING:-
Main heading
(Title Case, font size 16, Times New Roman, Bold, Left Align)
Sub Heading
(Title Case, font size 14, Times New Roman, Bold, Left Align)
Content Formatting
(Font Size 12, Times New Roman, Spacing 1.5, Justified Alignment)
Numbering of pages should be done in bottom of the pages
Types of binding- Spiral binding of Good conditions( At the time of internal Sessional
Exam)
SAMPLE FORMAT
A PROJECT REPORT ON
Designation :
BONAFIDE CERTIFICATE
This is certified that the Mini Project titled "Name of the Project" is the bonafide work of
"Students Name and university Roll No" who carried out the project under my supervision.
(Signature of Mentor)
Name of Mentor
Designation of Mentor
Date :
Date: Date :
FORMAT OF INDEX
Chapter No. Title Page No.
Bona fide i
Acknowledgement ii
Executive Summary iii
1 Introduction/Aims and Objective 1
2 System Analysis --
2.1 Identification of Need --
2.2 Preliminary Investigation --
3 Feasibility Study --
3.1 Technical Feasibility --
3.2 Economic Feasibility --
3.3 Operational Feasibility --
4 Analysis
4.1 DFD 0 Level, 1- Level and 2 Level --
4.2 ER Diagram --
4.3 Database, Table structure etc --
4.4 Sequential Diagram --
5 Software & Hardware Requirement Specification --
6 System Design
6.1 Module 1 --
6.2 Module 2, etc. --
7 Screen Shots of forms --
8 Validation Checks --
9 Implementation and Maintenance --
10 Testing --
(Testing techniques and Testing strategies)
11 Reports --
12 Future scope of the Mini Project --
13 Bibliography/References