Professional Documents
Culture Documents
MIX
multi B
INPUT EXP
High impedance mono or TRS Connect a standard TRS
stereo input (internal jumper expression pedal for continuous
configurable - see full user control over any selectable knob
manual for details). parameter. To select the knob
controlled by the expression
STEREO OUTPUTS INPUT EXP LEFT OUT RIGHT OUT 9VDC
+ -
pedal, hold the TAP footswitch
Use left output for mono
during power up. The first knob
operation.
turned is then then assigned
POWER to the expression pedal. The
Use an adapter with the maximum position the knob
following rating: 9VDC is turned up to becomes the
center negative. 250mA expression pedal “toe down”
minimum. maximum value.
Lower bias settings result in the cleanest echos with the most headroom.
REVERB) REVERB) REVERB)
REPEATS
(TAPE BIAS)
TAPE AGE
(LOW END CONTOUR)
REPEATS
WOW & FLUTTER
(TAPE CRINKLE)
TAPE CRINKLE Controls the amount and severity REPEATS
REPEATS of tape
(TAPE BIAS)
TAPE AGE
(LOW END CONTOUR)
WOW & FLUTTER
(TAPE CRINKLE)
irregularities, such as friction, creases, splices and contaminants.
TAPE AGE
(TAPE BIAS)
WOW & FLUTTER TAPE AGE
(TAPE BIAS)
WOW & FLUTTER
(LOW END CONTOUR) (TAPE CRINKLE) (LOW END CONTOUR) (TAPE CRINKLE)
NOTE: Secondary functions are accessed by holding both footswitches while turning control knobs.
TAPE HEAD MODE TAPE HEAD MODE TAPE HEAD MODE
fixed A fixed A fixed A
multi B multi B multi B
single C single C single C
REV E