Professional Documents
Culture Documents
Price Guide & To do a basic test to establish that your dynamo is working :-
Payments
Turnaround Times Disconnect the D & F (or F2) wires from it. Make a link wire up
Our Guarantee to connect the 2 terminals together. Between this common
Customer Feedback
connection and the body of the dynamo connect a bulb (for a 6v
What's new?
dynamo use a 6v 21w bulb and for a 12v dynamo use a 12v 21 or
36w bulb). Start the engine and the bulb should light if the
FAQ's
dynamo is good. Raise the revs and the bulb should burn brightly
Shows, Events and
Autojumbles and may even blow. Don't do this for too long as the dynamo is
A bit about LED Bulbs
running unregulated.
LED Tips and Hints
Contact Us
Follow CDRC on
Facebook
Sponsorship PWA7C
and LCR FM
Privacy Policy
www.dynamoregulatorconversions.com/how-to-test-a-dynamo.php 1/1