Professional Documents
Culture Documents
Model: D24-2
user's Guide
1
Sincerely
Respected user:
Thank you for choosing the instrument carefully designed and manufactured by our
company. In order to better exert the efficacy of the product, we sincerely recommend:
➢ Before using the instrument, please read this manual carefully and keep it in a safe place
➢ Except for the authorized personnel of the company, it is strictly forbidden for others to
This product is not a medical device, please do not use it for disease treatment!
2
Overview
808nm semiconductor laser hair removal device is a high-end hair removal device, which adopts the
most advanced laser hair removal technology in the world, and is currently the best hair removal device in
Product advantages
The laser refrigeration system adopts constant temperature cooling, which can ensure the continuous
operation of the whole system 7*24 hours. The air cooling + water cooling method commonly used in the
3、Adopt contact sapphire cooling system, high cooling conduction efficiency, make skin more
4、Intelligent water temperature control system: avoid excessive water temperature and damage the
handle.
5、The unique shape design and color matching make the product more beautiful and fashionable.
Function principle
The 808nm semiconductor laser hair removal system uses its unique long-pulse width laser to
penetrate the epidermis to the hair follicle. According to the principle of selective light absorption, the
energy of the laser is preferentially absorbed by the melanin in the hair, and then the hair loses its ability
to regenerate. During the treatment process, the system's unique sapphire dynamic cooling technology
anesthetizes the epidermis in a short period of time, thereby ensuring that the epidermis will not be
3
burned and achieving painless, fast and permanent hair removal.
Applicable scope
Hair removal: Effectively remove excess hair from various parts of the human body, such as armpit hair,
Technical Parameters
Instrument Composition
Installation operatio
(1)Carefully take out the instrument and accessories from the packing box, and save the packing
materials for future transportation or storage. Check attachments against attachment list.
(2)Attach the handle to the instrument; place the handle on the stand.
Note: When the handle is connected, make sure that the upper and lower blue buttons of the connector
are fully ejected, otherwise it is easy to cause the water flow to be blocked!
(1)Take out the water injection funnel and connect it to the water injection hole on the back of the
instrument;
(2)Fill in purified or distilled water; until water flows out of the overflow.
Note: Be sure to use pure water or distilled water, tap water or other water is not allowed.
4. Boot operation
(1) Connect the power cord and turn on the main power switch of the instrument;
Interface introduction
Start-up interface; the start-up interface is displayed after booting, click the lower left corner of the
Handle interface; there are two handles displayed, click Select to enter
5
Enter the operation part interface, as shown in the figure: select the operation part, click the middle
Enter the operation interface: there are three modes as shown in the figure.
6
① mode options② energy density regulation③ energy
regulation
regulation
8
Steps
1、Shaving
Before the operation, perform a shaving process, leaving 1-2mm of hair to facilitate the absorption of light
by the hair.
Apply a little cold gel on the operation site, the thickness of a coin should not be too thick, otherwise it will
According to the customer's skin color, hair thickness, and hair removal site, select the corresponding
9
treatment parameters, which should be adjusted flexibly according to the customer's feelings.
4、operation process
(1)Fit the skin to avoid light leakage, slowly slide the handle probe to operate
(2)Energy adjustment: start from the default energy of the system, if the operator feels that the heat is
too high, reduce the energy; if there is a slight sense of thermal expansion, it means that the melanin is
absorbed by the laser with a wavelength of 808nm, and the light energy is converted into heat energy,
destroying the hair follicles Melanin, which works best at this time.
(3)Operation time: About 10-15 minutes for legs hair removal, 5-10 minutes for arms hair removal, about
5 minutes for armpit hair removal, about 3 minutes for lip hair removal (for reference only, the specific time
should be determined according to the change of hair and the size of the hair removal site) Redness and
bulge of the hair follicles, slightly curly hair, and thermal swelling of the hair follicles are observed, which
5、 skin cooling
After the operation, use the handle probe on the treatment part to cool the part for 3-5 minutes, or cool it
down naturally.
6、clean skin
Operation precautions
1、Eyes must not look directly at the strong light emitted from the front end of the laser handle.
2、During operation, the handle slides slowly and must not stay in one place to emit light continuously, so
3、Avoid exposure to the sun, do a good job of sun protection, wipe sunscreen, barrier cream
4、Avoid manually hanging hair after epilation. Do a good course of hair removal
2、The instrument should be placed in a clean and ventilated room with a temperature of 5-40°C and a
3、During use, make sure that the vent of the instrument is not blocked, and there is at least a 5cm gap
4、Do not move the instrument for a long distance; the water in the instrument must be drained before
transportation, and all water holes must be blocked tightly, and the shock-absorbing packaging provided by
Taboo crowd
4、Photosensitivity Clients
5、People who have been working under strong light for a long time and have recently sunburned skin
quality assurance
11
The instrument is guaranteed for 24 months from the date of purchase (according to the bill), and the fault
(non-human phenomenon) within the warranty period will be repaired free of charge. If the warranty period
is exceeded, it can also be responsible for maintenance, and the cost of spare parts and consumables will be
charged according to the company's regulations (transportation costs are borne by the customer). If you
Free maintenance and warranty services are not provided for failures caused by the following users:
⑤ Faults caused by incorrect use in accordance with the instructions for use.
产品保修卡
产品名称 客户名称
产品型号 联系电话
购买日期 联系地址
12