You are on page 1of 3

737 Max Phase 1(A)

ATA 46 Information Systems


ATA 31 Indicating & Recording System

1. What does the FAULTGUIDANCE sub menu function show?

A. Diagnostic data to test

B. Quick reference to start BITE or troubleshooting procedures

C. Preconditions to show the test initiation screen

2. What calculates flight legs?

A. OMF

B. FMS

C. MDS

3. What sends the ICAO aircraft ID to the NFS?

A. The left ATC transponder

B. The FMCs

C. The DPCs

4. What type of interface an EEC have with the NFS?

A. ARINC 818

B. Ethernet (ARINC 615A)

C. ARINC 429

5. What is the primary LRU of the Onbaord Network System?

A. NFS

B. DPC

C. ONS
6. What makes FDE/Fault Data correction?

A. ABC

B. OMF

C. CMC

7. Where is the NFS?

A. FWD cargo compartment

B. E & E compartment

C. FWD equipment compartment

8. Which main menu will let you see flight deck effects sub menus?

A. Extended MAINT

B. LINE MAINT

C. OTHER FUNCTIONS

9. What are the hazards around an engine in operation?

A. Exhaust velocity, engine noise, vibration, static shock

B. Inlet suction, exhaust heat, exhaust velocity, engine noise

C. Engine noise, vibration, static shock, afterburner flames

10. How many display (total) are on P1 and P3 instrument panels?

A. 5

B. 2

C. 4
11. What messages can you use to search for isolation tasks in FIM?

A. CAUTION and STATUS

B. Caution and FDEs

C. STATUS and Maintenance

12. How much time is necessary for the DPC to complete the power-up BIT

A. 90 Seconds

B. 120 Seconds

C. 60 Seconds

13. How you can show VSD data on the ND?

A. Use the WPT push button on the EFIS control panel

B. Use the DATA push button on the EFIS control panel

C. Use the VSD button on the EFIS control panel

14. How is fiber-optic cross-talk condition shown?

A. OFF (Cyan lines,boxes and text) ACTIVE(green lines,boxes and text) FAILED (red lines,boxes and text)

B. ACTIVE (green lines,boxes and text) FAILED (amber lines,boxes and text) INACTIVE (dim white lines boxes and text)

C. NORM (dim green lines,boxes and text) FAILED (amber lines,boxes and text) inactive (dim white lines boxes and
text)

15. When can maintenance page show?

A. On ground and in the air

B. On ground or above 10000 feet

C. On ground and above 2000 feet

16. Which display do the EFIS control panels controls?

A. PFD and ND

B. PFD only

C. ND only

You might also like