Professional Documents
Culture Documents
Technology and
Livelihood Education
Computer Systems Servicing NC II
Module 1
INSTALL AND UPDATE REQUIRED MODULES/ADD-ONS ON
NOS INSTALLATION PROCEDURES
CO_Q3_TVL 12_CSS_Module 1
Computer Systems Servicing – 12
Alternative Delivery Mode
Quarter 3– Module 1: Install and update required modules/add-ons on NOS
installation procedures
Republic Act 8293, section 176 states that: No copyright shall subsist in any work of the
Government of the Philippines. However, prior approval of the government agency or office
wherein the work is created shall be necessary for exploitation of such work for profit. Such
agency or office may, among other things, impose as a condition the payment of royalties.
Borrowed materials (i.e., songs, stories, poems, pictures, photos, brand names, trademarks,
etc.) included in this module are owned by their respective copyright holders. Every effort
has been exerted to locate and seek permission to use these materials from their respective
copyright owners. The publisher and authors do not represent nor claim ownership over
them.
Technology and
Livelihood Education
Computer Systems Servicing NC II
Module 1
INSTALL AND UPDATE REQUIRED
MODULES/ADD-ONS ON NOS
INSTALLATION PROCEDURES
What I Need to Know
In this module you will be familiarized on what DHCP is and be guided to the step by
step in configuring DHCP server. And since you already have a background in file sharing, you
will now be guided in configuring file server. This topic will help you to access the services that
Windows Server 2008 R2 offers.The lessons are arranged to follow the standard sequence of the
course. However, the order in which you read the module can be changed to correspond with the
textbook you are now using.
1.1 Identify necessary network materials in accordance with established procedures and
check against system/hardware requirements.
1.2 Install and update required modules/add-ons on NOS installation procedures
What I Know
Pre-Assessment
______1. When using Active Directory, every object on the network can be controlled.
______2. Networks are collections of users, printers and resources.
______3. Windows 2000 Forest function level allows domains that contain only Windows
2000/2003/2008 domain controllers.
______4. Windows Server 2008 continues to support Active Directory adding new features.
______5. Active Directory is a troubleshooting tool.
Directions: Multiple Choice. Read each question carefullly and choose the letter of the
correct answer. Write your answer on your answer sheet.
CO_Q3_TVL 12_CSS_Module 1
Lesson
INSTALL AND UPDATE REQUIRED MODULES/ADD-
1 ONS ON NOS INSTALLATION PROCEDURES
What’s In
Hello learners! How are you today? I hope you are doing fine.
CO_Q3_TVL 12_CSS_Module 1
What’s New
1. Server
2. Configure
3. Domain
4. Client
5. Reboot
6. Workgroup
7. IP Address
8. Windows
9. Network
10. Roles
CO_Q3_TVL 12_CSS_Module 1
What is It
As its name implies, the role of a server is to serve. To perform this job, it must be
loaded with a special operating system (OS), such as Microsoft Windows Server
2008. That's the one we will use.
Note: These steps describe the installation of Windows Server 2008 R2 Enterprise (Full
Edition).These steps are included to demonstrate ground-up installations of
an Infinity application in a two machine and three machine scenario.
To use Windows Server 2008 you need to meet the following hardware requirements:
Component Requirement
CO_Q3_TVL 12_CSS_Module 1
Available Disk • Minimum: 10GB • Recommended: 40GB or greater Note: Computers with more
Space than 16GB of RAM will require more disk space for paging, hibernation, and
dump files
Display and • Super VGA (800 x 600) or higher-resolution monitor • Keyboard • Microsoft
Peripherals Mouse or compatible pointing device
1. Insert the appropriate Windows Server 2008 installation media into your DVD drive or
you can use your Bootable flashdrive.
3. When prompted for an installation language and other regional options, make your
selection and press Next.
CO_Q3_TVL 12_CSS_Module 1
5. Select Windows Server 2008 R2 Enterprise (Full Installation) and click Next.
6. Read and accept the license terms by clicking to select the checkbox and pressing Next.
CO_Q3_TVL 12_CSS_Module 1
7. In the “Which type of installation do you want?” window, click the only available option
– Custom (Advanced).
8. In the “Where do you want to install Windows?”, if you’re installing the server on a
regular IDE hard disk, click to select the first disk, usually Disk 0, and click Next.
CO_Q3_TVL 12_CSS_Module 1
9. The installation now begins.
CO_Q3_TVL 12_CSS_Module 1
CO_Q3_TVL 12_CSS_Module 1
CO_Q3_TVL 12_CSS_Module 1
CO_Q3_TVL 12_CSS_Module 1
10. Then the server reboots you’ll be prompted with the new Windows Server 2008 type of
login screen. Press CTRL+ALT+DEL to log in.
11. The default Administrator is blank, so just type Administrator and press Enter.
12. You will be prompted to change the user’s password. You have no choice but to
press Ok.
13. Enter a new password, re-enter the password to confirm it, and click the right-arrow.
CO_Q3_TVL 12_CSS_Module 1
14. Someone thought it would be cool to nag you once more, so now you’ll be prompted to
accept the fact that the password had been changed. Press Ok.
15. After you click OK on the confirmation screen, the operating system prepares your
desktop.
CO_Q3_TVL 12_CSS_Module 1
CO_Q3_TVL 12_CSS_Module 1
16. The Initial Configuration Tasks window appears by default. Windows Server is now
installed. Windows Server prompts for activation information. Enter the Product Key and
click Next.
CO_Q3_TVL 12_CSS_Module 1
NOTE: All pictures posted here in INSTALL WINDOWS SERVER 2008 this is the link:
https://www.blackbaud.com/files/support/infinityinstaller/content/installermaster/
tkinstallwindowsserver2008r2.htm
CO_Q3_TVL 12_CSS_Module 1
STEP BY STEP GUIDE TO INSTALL DHCP ROLE AND CONFIGURE
1. To start the DHCP installation process, you can click Add Roles From the Initial
Configuration Tasks window or from Server Manager > Roles > Add Roles.
CO_Q3_TVL 12_CSS_Module 1
3. Read and evalutate DHCP overview
4. Select network binding connection. In this part you have to select available network
connections, if you have to or more network adapters you need to select the network
connection that you are going to bind. In this example, I only have one network
connection.
CO_Q3_TVL 12_CSS_Module 1
5. Setting the Ipv4 DNS Server. The first thing you need to do is to specify the name of
the parent domain that clients will use for name resolution. This domain will use for
all scope you create on this DHCP server. In this example I used itsmeimael.com for
parent domain.
In prefer DNS server Ipv4 address, you must to specify the address of the DNS that
client will use for name resolution. In this case I used 192.168.1.50 because this is my
server address. In short it is the address of your server. Click validate the press next
button.
CO_Q3_TVL 12_CSS_Module 1
6. WINS Server Setting.
7. Add or edit DHCP Scopes. Just click next, this scope is intentionally left blank
because we are going to add scopes later manually.
CO_Q3_TVL 12_CSS_Module 1
8. Configure DHCPv6 stateless mode. Our current network doesn’t support Ipv6
therefore just click Disable stateless mode for this server.
9. Authorization of DHCP server will be configure later just click Skip authorization
this DHCP server in AD DS then click next.
CO_Q3_TVL 12_CSS_Module 1
10. The confirmation of installation will prompt. Review the following configuration the
click Install if there are no futher revisions.
11. Installation progress wizard will appear. Wait for a few moments then go to next step.
CO_Q3_TVL 12_CSS_Module 1
12. Installation result. Click close.
CO_Q3_TVL 12_CSS_Module 1
CONFIGURATION
1. Open DHCP. Click start>Adminitrative Tools > DHCP
3. In our installation earlier we never authorized any configuration but in this step we
need to authorize our DHCP server in order to lease IP address and create some
address pools.
CO_Q3_TVL 12_CSS_Module 1
4. How to authorize DHCP server. Right click here > click
authorize. Right click then referesh as shown in (Figure4.2) then verify the
authorization. Check marks will appear after the successful authorization (Figure 4.3).
CO_Q3_TVL 12_CSS_Module 1
5. Adding scope click Ipv4 then click New Scope (See Figure 5.2)
CO_Q3_TVL 12_CSS_Module 1
New Scope Wizard will appear.
6. Setting the scope name and description. Name is any recognizable and user friendly
scope name while description is an adjective definition for new scope name.
CO_Q3_TVL 12_CSS_Module 1
7. Defining the scope address range by indentifying the sets of consecutive IP addresses.
Example IP range is on Figure 8.
CO_Q3_TVL 12_CSS_Module 1
8. Add extension. Exclusion are addresses includes the address or range of an IP
addresses that are not leased by the server. For instance, In in figure 8, there is an IP
range between 192.168.1.100 to 192.168.1.254 which are available for leasing. but
But, if we apply exclusion range, e.g. 192.168.1.150 to 192.168.1.200 it means that,
this range bracket are not available for leasing.
9. Lease duration it pertains on how long a client uses an IP address from the scope.
Usually, it is intentionally left by default but, you can configure it if you wanted to
adjust a specific duration.
CO_Q3_TVL 12_CSS_Module 1
10. Configure DHCP Options. Just click the option “No, I will configure these options
later”, just wanted to show how to configure it manually.
CO_Q3_TVL 12_CSS_Module 1
12. Scope activation. A new created scope is disabled by default. In order to lease an IP
address. we need to activeate the created scope by right clicking the right highlighted
color then click the suggested active option as shown in figure 13.2. - the click refrest
(Figure 13.3).
CO_Q3_TVL 12_CSS_Module 1
13. Checking our the address pool.
CO_Q3_TVL 12_CSS_Module 1
14. Configureing the scope option. Right click Scope option then choose configure
options (Figure 15.2).
15. Scope option will appear as check 003 Router, then type the IP address type the IP
address of your rourter router then click “add > click apply >click OK”, as shown in
Figures 16.1 and Figure 16.2.
CO_Q3_TVL 12_CSS_Module 1
Figure 16.2
CO_Q3_TVL 12_CSS_Module 1
SETTING DYNAMIC IP ADDRESS
1. Login to your configuresd client network machine then and open network machine it
by pressing the windows button “ + r “ then followed by typing, ncpa.cpl then click
OK button.
2. In your network connection, right click the Local Area Connection then and choose
properties >. User account control dialog box will appear. Type your Administrator
credentials then click Yes. (Figure 2.2)
CO_Q3_TVL 12_CSS_Module 1
CO_Q3_TVL 12_CSS_Module 1
CO_Q3_TVL 12_CSS_Module 1
3. Double click the highlighted TCP/Ipv4.
4. By Configure configuring, the static IP setting will appear. But, we don’t need our
setting set to remain static, therefore, we need to obtain our IP address in order to
request an IP from the DHCP server we created earlier. Click the “obtain IP address”
option to automatically as well obtain the DNS server automatically as shown in
figure 4.2.
CO_Q3_TVL 12_CSS_Module 1
5. Verify an obtained IP setting. Press windows + r then type CMD, click OK to open
the command prompt. Type your hostname then hit click enter. (Figure 5.2) then After
CO_Q3_TVL 12_CSS_Module 1
which, type ipconfig (Figure 5.3) then hit enter. You’ll will see the laesed leased IP
address given by the DHCP server.
CO_Q3_TVL 12_CSS_Module 1
CO_Q3_TVL 12_CSS_Module 1
6. Checking the leased IP address. Open your DHCP in yor your SERVER server and
click the address leases leased. (Figure 6.1) then right click (Figure 6.2) then you will
see the leased IP address and client name (Figure 6.3).
CO_Q3_TVL 12_CSS_Module 1
NOTE:
After installing your Server Operating System, you have also have to finish to install your
Client Operating System in your own PC either in Windows 10 or 8. then After you have to
followed the correct procedures on how to install the operating system, so that you will
perform the netwoking networking and update the required modules/add-ons on NOS.
CO_Q3_TVL 12_CSS_Module 1
What’s More
Directions: Complete the crossword by filling in a word that fits each given clue. Match
the number of the word/s to the boxes placed across or down the grid. If filled-out correctly,
the word/s will fit neatly into the puzzle
Across:
2. It distributeds the application structure
that the partitions are tasked to do.
7. It is an interconnection of multiple devices.
9.Someone who can make changes on
a computer that will affect other users of
the computer.
Down:
1. The software that supports a computer's
basic functions, such as scheduling
tasks, executing applications, and
controlling peripherals.
2. A computer that provides data to other
computers.
3. It provides a method to define the
utilization types of a server has that is
available.
4. A numerical label assigned to each device
connected to a computer network that uses
the Internet Protocol for communication.
5. A machine that can be instructed to
carry out sequences.
8. A software control panel that enables the
user to configure the appearance or actions
in an application, operating system or
the hardware
CO_Q3_TVL 12_CSS_Module 1
What I Have Learned
Login to your configures configured client machine then open network machine by pressing
windows button + r and type ncpa.cpl then click OK.
Checking the leased IP address. Open your DHCP in yor your SERVER then click address leases
then right click and you’ll see the leased IP address and client name.
Click Local Area Connection then choose propertiest properties, type your Administrator credentials
then click Yes.
Configure static IP setting the click obtain IP address automatically as well as obtaining the DNS
server automatically.
Double click the highlighted TCP/Ipv4
Verify an obtained IP setting. Press windows + r then and type the CMD click OK to open the
command prompt. Type the hostname and click the enter option then followed by typing the
ipconfig the to finally hit enter.
CO_Q3_TVL 12_CSS_Module 1
What I Can Do
ACTIVITY 4: (PERFORMANCE-BASED)
Directions: A task sheet is provided in this Learning Activity Sheet as well as
Rubrics for the task. You need to finish the given activity within the time allotment
allotted time. Provide the necessary materials indicated for the activity.
TASK SHEET
Title: Installing an active directory.
Performance Objective: Given are the following materials, you should be able to
install active directory within the given Allotted time of 1 one hour.
Supplies/Materials:
Equipment: Computer with Windows Server 2008
Prerequisites: Installed and configured active directory.
Steps/Procedures:
1. Read information sheet Install and Configure DHCP
2. Create an Organization Unit
Where:
Name of Organization Unit(s) = CSS Students
3. Create two domain users
Where:
Name of first user = Your full name, Login username = Wireless Client
Name of second user = Your full name, Login username = Wired Client
Set the password as _admin@123 for both users
4. Create a group
Where:
Group name = CSS Group
Add your newly added domain users inside the group
During the performance of the task, did you consider the following criteria?
Grade Point
CRITERIA YES Equivalent
Highest NO
Possible Score =5
Lowest Possible
Score = 0
Did the trainee…
1. Installed the Window Server 2008
CO_Q3_TVL 12_CSS_Module 1
2. 2. Installed and configured active directory
correctly.
3. Used proper domain name suffix.
Total Items
Grade Point
Descriptive Value
Equivalent
5 Excellent
4 Very Good
3 Good
2 Average
1 Poor
0 Failure
___________________________________________
Name of the Teacher/Trainor
CO_Q3_TVL 12_CSS_Module 1
REFLECTION
Assessment
POST-ASSESSMENT
THINK ME!
Directions: Read and analyse analyze the statements carefully. Write the letter of your
answer choice beside the each number.
4. What is the minimum free disk space for installing Windows Server 2008?
a. 10GB b. 5GB c. 3GB d. 14TB
5. During installation which of the following might the computer do several times?
a. Fall off the desk c. Show the blue screen of death
b. Crash d. Reboot
6. When installing Windows Itanium Based Server 2008 what is the minimum amount
of RAM required?
CO_Q3_TVL 12_CSS_Module 1
a. 152MB b. 5TB c. 2GB d. 1GB
7. When installing a Windows Server 2008 64bit what is the minimum amount of RAM
required?
a. 512MB b. 128MB c. 64MB d. 10KB
8. What type of mouse is required when running and installing Windows Itanium Based
Server 2008?
a. None you can use the keyboard
b. USB type
c. Ps/2 type
d. Any, it doesn’t matter which type you use as long as the computer has a
compatible port for the mouse you want to use.
9. What tool do printing administrators on large enterprise networks use to keep track of
print devices?
a. Server Manager console c. Printer pool
b. Internet Printing role d. Print Management console
Additional Activities
Using the emojis shown above, write a paragraph with a minimum of 4 sentences
describing how you feel about the topic. Then e Explain which part did you have explained
difficulties or which part you enjoyed the most. Write this on your notebook.
Scoring Rubrics
5 4 3 2 Score
CO_Q3_TVL 12_CSS_Module 1
All content 80% of the Some content The content
reflects the content is related to the is far from
learner’s reflects the topic it also the lesson.
understanding learner’s reflects their
on the lesson. understanding understanding.
on the lesson.
No spelling, Few spellings Several So many
CONTENT
punctuation or and spelling, spelling,
grammatical punctuation punctuation or punctuation
errors errors, minor grammatical and
grammatical errors. grammatical
errors errors that’s
interferes in
the meaning
TOTAL
CO_Q3_TVL 12_CSS_Module 1
Answer Key
1. TRUE
2. TRUE
3. TRUE
4. TRUE
5. FALSE
MULTIPLE CHOICE:
1. A
2. B
3. B
4. B
5. C
1 To start the DHCP installation process, you can click Add Roles from the Initial Configuration
Tasks window or from Server Manager > Roles > Add Roles.
3 Read and evalutate evaluate the DHCP overview.
CO_Q3_TVL 12_CSS_Module 1
2 Select a server role.
7 Add or edit DHCP Scopes.
1 Login to your configures client machine then open network machine by pressing windows button
“+ r” then type ncpa.cpl then click OK.
6 Checking the leased IP address. Open your DHCP in yor SERVER then click address leases then
right click then you’ll see the leased IP address and client name.
2 Click Local Area Connection then choose propertiest properties then type your Administrator
credentials then click Yes.
4 Configure static IP setting the click obtain IP address automatically as well obtain DNS server
automatically.
3 Double click the highlighted TCP/Ipv4
5 Verify an obtained IP setting. Press windows + r then type CMD click OK to open command
prompt. Type hostname then hit enter then type ipconfig the hit enter.
ACTIVITY 4: (PERFORMANCE-BASED)
(This activity is checked by the teacher/trainer basing from the criteria set in the
rubrics.)
POST TEST: THINK ME!
1. A
2. B
3. D
4. A
5. D
6. D
7. A
8. D
9. D
10. C
CO_Q3_TVL 12_CSS_Module 1
References
https://petri.com/how-to-install-windows-server-2008-step-by-step
https://www.blackbaud.com/files/support/infinityinstaller/content/installermaster/
tkinstallwindowsserver2008r2.htm
https://www.howtogeek.com/99323/installing-active-directory-on-server-2008-r2/
https://www.scribd.com/document/425974664/3-1-9-Install-and-Configure-
DHCPwsserver2008r2.htm
Prepared by:
Content Editor:
Language Editors:
LEINEL M. MALAZZAB
Aparri West National High School
EMILYN PADDAYUMAN
________ National High School
CO_Q3_TVL 12_CSS_Module 1