Professional Documents
Culture Documents
ASA 2310
Flexible TMR Analog Front-End IC
for High-Speed Angle Sensing Applications
ASA 2310 is a high-performance TMR ana- The ASA 2310 is programmable by modula- ◆◆ SEooC ASIL B ready according to
log front-end IC for high-speed angle sens- tion of the output voltage. No additional pro- ISO 26262:2018 to support Functional
ing applications with rotation speeds of up to gramming pin is needed and fast end-of-line Safety applications (Metrics (PMHF,
650,000 rpm. programming is enabled. SPFM, LFM) according to ASIL C)
The ASA 2310 is designed to interface the This product is defined as SEooC (Safety Ele- ◆◆ Intrinsic signal conditioning with on-chip
high-precision analog TMR sensors of the ment out of Context) ASIL B ready according to calibration and integrated safety monitor-
TAS family. The sensor interface provides two ISO 26262:2018 (Metrics (PMHF, SPFM, LFM) ing reduce effort on ECU side
differential inputs for sine and cosine TMR according to ASIL C). ASA 2310 contains inte- ◆◆ Flux-less self-test
resistive bridges, respectively. The integrated grated safety monitorings, such as overvoltage
sine and cosine channels of ASA 2310 have and undervoltage detection as well as wire- ◆◆ Operates from 3.0 V up to 5.5 V supply
their own programmable gain amplifier (PGA), break monitoring during normal operation. voltage
which are used as a low-noise instrumenta-
The signal-conditioning IC is available in a very ◆◆ Low current consumption of typ. 5.5 mA
tion amplifier for the TMR sensor signals.
Several coarse gain settings ensure that the compact 3 × 3 mm2 DFN12 SMD package. ◆◆ Operates from –40 °C up to 170 °C junc-
device can support various TMR full- and half- tion temperature (Max. Ambient Tem-
bridges from TDK. The output buffer amplifies Main Features and Benefits perature: TA,absmax = 160 °C)
the signal even further and acts as buffer for
the external load. ◆◆ Support of various TMR full- and half- ◆◆ Programming via the IC’s output pin.
bridges from TDK No additional programming pin required
The ASA 2310 offers an intrinsic signal condi-
◆◆ Optimized signal conditioning for TMR ◆◆ Overvoltage and reverse-voltage pro-
tioning with on-chip calibration, which reduces
signals, like output gain, offset, 0-angle tection
effort on ECU side. The device can compen-
sate for the main sensor and magnetic sys- and orthogonality correction ◆◆ Under- and overvoltage detection of VSUP
tem non-idealities, like offset error, amplitude ◆◆ Easy-to-use differential or single-ended
mismatch and orthogonality error. In addition, ◆◆ Passive wire-break detection working with
SIN/COS outputs for remote sensing external pull-up or pull-down resistors
it is possible to define the angular reference applications with best-in-class EMC
position (0-angle) for the sine and cosine out- performance ◆◆ On-chip temperature sensor for overtem-
put signals. This allows the compensation of perature supervision
mechanical twist between magnet and sensor ◆◆ Fast response time of max. 3 µs and high
at module level. The conditioned signals can output bandwidth for applications up to ◆◆ Integrated, protected supply for the
be output as differential or single-ended analog 650,000 rpm external TMR bridges
sine and cosine output signals. These signals
◆◆ Various analog output configurations ◆◆ Various integrated supervision features of
allow the user to calculate the angle with very
high accuracy by an external A/D-converter –– Differential or single-ended SIN/COS the external TMR bridges
and a microcontroller/ECU. analog output signals
◆◆ Small 3 × 3 mm2 DFN12 SMD package
–– Non-ratiometric or ratiometric analog
outputs related to the supply voltage ◆◆ AEC-Q100 qualification
PRODUCT INFORMATION
ASA 2310
Major Applications
On-axis Off-axis
Motor Position with TMR Motor Position with TMR
Two-Pole Magnet
1 x ASA 2310
1 x TMR Sensor Multi-Pole Magnet Ring
1 x ASA 2310
Up to 4 x TMR Sensors
All information and data contained in this product information are without any commitment, are not to be con- No part of this publication may be reproduced,
sidered as an offer for conclusion of a contract, nor shall they be construed as to create any liability. Product or photocopied, stored on a retrieval system, or trans-
development sample availability and delivery are exclusively subject to our respective order confirmation form. mitted without the express written consent of
By this publication, TDK-Micronas GmbH does not assume responsibility for patent infringements or other rights TDK‑Micronas GmbH.
of third parties which may result from its use.
Edition Nov. 4, 2022; Order No. PI000170_001EN
TDK-Micronas GmbH • Hans-Bunte-Strasse 19 • D-79108 Freiburg (Germany) • P.O. Box 840 • D-79008 Freiburg (Germany)
Tel. +49-761-517-0 • Fax +49-761-517-2174 • www.micronas.tdk.com