Professional Documents
Culture Documents
Clamp
Clamp
Clamp
API Spec. 16A Clamps, includes assembly drawings, sizes available, parts description, and
part numbers, how to install, plus a Hub Identification Worksheet, a Clamp Identification
Worksheet, WOODCO USA API 16A License Certificate and DNV Type Approval
Certificate.
TRADEMARK
®
WOODCO
USA
BUY THE BRAND ®
REG. U.S. PATENT OFFICE
MANUFACTURER
WOODCO USA
P.O. Box 1261
Houston, Texas 77251-1261
Phone: 713-672-9491
U.S. and Canada: 1-800-496-6326
Fax: 713-672-8768
www.woodcousa.com
Email: contact@woodcousa.com
Effective Date: Feb. 1, 2005 Terms of Use and Copyright © 2018 WOODCO USA
WOODCO USA presents this catalog to gain your attention and secure your business
Catalog for WOODCO USA® Brand Clamps for Clamp Hub Connections Page 2
WOODCO USA presents this catalog to secure your business. Phone: 713-672-9491
TABLE OF CONTENTS
PHOTO
CLAMP HALF (2)
S A
U
C O
O D
O
W
© STUD BOLT (4), WITH NUT (8)
SWIVEL LIFTING EYE
(SEE TABLE 1)
INNER AND OUTER
WASHER (8 EACH)
NUT
OUTER WASHER
INNER WASHER
C WOODCO USA
WASHER DETAIL
NUT
OUTER WASHER
INNER WASHER
C WOODCO USA
WASHER DETAIL
* NOT API NOTE: Reference this page to obtain parts information for WOODCO USA clamps, or to determine which hub(s) a clamp fits.
NUT
OUTER WASHER
INNER WASHER
C WOODCO USA
WASHER DETAIL
C WOODCO USA
E
H J
D
A
C
B
* NOT API NOTE: Reference this page to obtain parts information for WOODCO USA clamps, or to determine which hub(s) a clamp fits.
C WOODCO USA
E
H J
D
A
C
B
Figure 3, Clamp and Hub Dimensions
G
Table 2, Clamp and Hub Dimensions (continued) (All dimensions in inches)
RING
WORKING HUB DIMENSIONS F CLAMP DIMENSIONS
BORE GASKET CLAMP
PRESSURE E (RX ONLY)
A NO.
(PSI) RX BX B C D NOT API G H I J
SR RX BX
3 1/8 5,000 - 154 4 6.312 4.938 2.625 - - 1.166 - 12.50 4.47 5.125 2.875
5,000 27* - 4 6.312 4.938 2.375 - .911 - .47 12.50 4.47 5.125 2.875
3 1/16 10,000 - 154 5 7.625 6.250 2.750 - - 1.197 - 13.75 4.50 6.438 2.938
10,000 27* - 5 7.625 6.250 2.375 - .943 - .47 13.75 4.50 6.438 2.938
15,000 - 154 6 8.437 6.812 3.000 - - 1.310 - 16.00 5.38 7.062 3.250
15,000 27* - 6 8.437 6.812 2.750 - 1.067 - .47 16.00 5.38 7.062 3.250
20,000 - 154 8 13.250 11.625 3.625 - - 1.622 - 22.88 6.50 11.875 3.875
4 1/16 5,000 - 155 5 7.625 6.250 2.500 - - 1.197 - 13.75 4.50 6.438 2.938
5,000 35* - 5 7.625 6.250 2.375 - .943 - .47 13.75 4.50 6.438 2.938
10,000 - 155 6 8.437 6.812 3.000 - - 1.310 - 16.00 5.38 7.062 3.250
10,000 35* - 6 8.437 6.812 2.750 - 1.067 - .47 16.00 5.38 7.062 3.250
15,000 - 155 8 13.250 11.625 3.625 - - 1.622 - 22.88 6.50 11.875 3.875
20,000 - 155 10 16.250 14.625 4.125 - - 1.653 - 27.25 7.75 14.875 3.938
5 1/8 10,000 - 169* 7 10.875 9.250 3.375 - - 1.459 - 19.50 5.88 9.500 3.548
15,000 - 169* 8 13.250 11.625 3.625 - - 1.622 - 22.88 6.50 11.875 3.875
7 1/16 2,000 45 - 25 10.375 8.875 2.625 1.443 - - - 16.75 4.75 9.125 3.459
5,000 - 156 8 13.250 11.625 3.625 - - 1.622 - 22.88 6.50 11.875 3.875
5,000 45* - 7 10.875 9.250 3.125 - 1.224 - .47 19.50 5.88 9.500 3.548
10,000 - 156 10 16.250 14.625 4.125 - - 1.653 - 27.25 7.75 14.875 3.938
10,000 45* - 8 13.250 11.625 3.375 1.380 - .47 22.88 6.50 11.875 3.875
* NOT API NOTE: Reference this page to obtain parts information for WOODCO USA clamps, or to determine which hub(s) a clamp fits.
C WOODCO USA
E
H J
D
A
C
GB
Figure 3, Clamp and Hub Dimensions
G
Table 2, Clamp and Hub Dimensions (continued) (All dimensions in inches)
RING
WORKING HUB DIMENSIONS F CLAMP DIMENSIONS
BORE GASKET CLAMP
PRESSURE E (RX ONLY)
A NO.
(PSI) RX BX B C D NOT API G H I J
SR RX BX
7 1/16 15,000 - 156 22 20.625 18.625 5.125 - - 2.035 - 33.62 9.25 18.875 4.875
15,000 45* - 10 16.250 14.625 **
3.625
- 1.411 - .47 27.25 7.75 14.875 3.938
20,000 - 156 15 22.250 20.625 5.375 - - 2.309 - 39.00 10.38 20.875 5.250
9 5,000 - 157 8 13.250 11.625 3.625 - - 1.622 - 22.88 6.50 11.875 3.875
5,000 49* - 8 13.250 11.625 3.375 - 1.380 - .47 22.88 6.50 11.875 3.875
10,000 - 157 10 16.250 14.625 4.125 - - 1.653 - 27.25 7.75 14.875 3.938
10,000 49* - 10 16.250 14.625 **
3.625
- 1.411 - .47 27.25 7.75 14.875 3.938
11 3,000 53 - 9 15.625 14.000 2.875 1.399 - - - 24.50 5.75 14.250 3.429
3,000 53* - 9 15.625 14.000 2.875 - 1.130 - .47 24.50 5.75 14.250 3.429
5,000 - 158 10 16.250 14.625 4.125 - - 1.654 - 27.25 7.75 14.875 3.938
5,000 53* - 10 16.250 14.625 **
3.625
- 1.411 - .47 27.25 7.75 14.875 3.938
10,000 - 158 22 20.625 18.625 5.125 - - 2.035 - 33.62 9.25 18.875 4.875
10,000 53* - 13 20.625 19.000 4.250 - 1.630 - .47 33.00 9.25 19.250 4.375
15,000 - 158 15 22.250 20.625 5.375 - - 2.309 - 39.00 10.38 20.875 5.250
20,000 - 158 28 28.000 25.000 7.000 - - 3.005 - 45.25 12.00 25.250 7.282
13 5/8 3,000 57 - 11 18.375 16.750 3.000 1.336 - - - 27.62 5.88 17.250 3.188
3,000 57* - 11 18.375 16.750 3.000 - 1.067 - .47 27.62 5.88 17.250 3.188
5,000 - 160 13 20.625 19.000 5.625 - - 1.871 - 33.00 9.25 19.250 4.375
5,000 57* - 13 20.625 19.000 4.250 - 1.630 - .47 33.00 9.25 19.250 4.375
10,000 - 159 15 22.250 20.625 5.375 - - 2.309 - 39.00 10.38 20.875 5.250
10,000 57* - 15 22.250 20.625 5.125 - 2.067 - .47 39.00 10.38 20.875 5.250
15,000 - 159 28 28.000 25.000 7.000 - - 3.005 - 45.25 12.00 25.250 7.282
* NOT API NOTE: Reference this page to obtain parts information for WOODCO USA clamps, or to determine which hub(s) a clamp fits.
** Caution: Current WOODCO USA #10 Clamps require Hub length minimum to measure 4-1/8” for assembly.
www.woodcousa.com Terms of Use and Copyright © 2018 WOODCO USA
Catalog for WOODCO USA® Brand Clamps for Clamp Hub Connections Page 11
WOODCO USA presents this catalog to secure your business. Phone: 713-672-9491
C WOODCO USA
E
H J
D
A
C
B
Figure 3, Clamp and Hub Dimensions
G
Table 2, Clamp and Hub Dimensions (continued) (All dimensions in inches)
RING
WORKING HUB DIMENSIONS F CLAMP DIMENSIONS
BORE GASKET CLAMP
PRESSURE E (RX ONLY)
A NO.
(PSI) RX BX B C D NOT API G H I J
SR RX BX
16 3/4 2,000 65 - 12 20.375 19.000 2.500 1.269 - - - 29.12 5.75 19.500 2.938
2,000 65* - 12 20.375 19.000 2.500 - 1.005 - .47 29.12 5.75 19.500 2.938
3,000 65 - 14 21.250 19.625 3.000 1.459 - - - 31.25 6.81 20.125 3.433
3,000 65* - 14 21.250 19.625 3.000 - 1.193 - .47 31.25 6.81 20.125 3.433
5,000 - 162 19 25.625 24.000 6.000 - - 1.778 - 40.50 10.50 24.250 4.188
5,000 65* - 19 25.625 24.000 6.000 - 1.536 - .47 40.50 10.50 24.250 4.188
5,000 - 161* 19 25.625 24.000 6.000 - - 1.778 - 40.50 10.50 24.250 4.188
10,000 - 162 28 28.000 25.000 7.000 - - 3.005 - 45.25 12.00 25.250 7.282
18 3/4 10,000 - 164 27 31.250 27.875 8.000 - - 3.630 - 49.50 13.12 28.125 8.707
15,000 - 164 26 34.000 30.500 8.000 - - 4.005 - 54.50 15.81 30.750 9.515
20 3/4 2,000 73* - 18 26.375 24.500 4.125 - 1.563 - .59 39.00 9.50 24.750 4.492
3,000 73* - 17 25.625 24.000 3.750 - 1.474 - .59 38.12 9.25 24.500 4.053
3,000 73* - 18 26.375 24.500 4.125 - 1.563 - .59 39.00 9.50 24.750 4.492
3,000 73* - 18 26.375 24.500 4.125 - 1.872 - .00 39.00 9.50 24.750 4.492
21 1/4 2,000 73* - 16 24.812 23.188 2.875 - 1.161 - .59 35.00 6.81 23.750 3.397
2,000 73 - 18 26.375 24.500 4.125 1.872 - - - 39.00 9.50 24.750 4.492
2,000 73* - 18 26.375 24.500 4.125 - 1.563 - .59 39.00 9.50 24.750 4.492
2,000 73* - 18 26.375 24.500 4.125 - 1.872 - .00 39.00 9.50 24.750 4.492
5,000 - 165 27 31.250 27.875 8.000 - - 3.630 - 49.50 13.12 28.125 8.707
10,000 - 166 26 34.000 30.500 8.000 - - 4.005 - 54.50 15.81 30.750 9.515
30 1,000 SPCL - 20 34.750 32.750 4.000 - - - - 46.12 7.62 33.250 4.674
* NOT API NOTE: Reference this page to obtain parts information for WOODCO USA clamps, or to determine which hub(s) a clamp fits.
Figure 4
WASHER DETAIL
NUT
WOODCO USA
INNER WASHER (BEARING) BLUE
C
XXXXXX
USA
W
XXXXXX
XXXXXX
KEEP (CONCAVE)
XXXXXX WOODCO
* WOODCO USA assembles API 16A Clamps with L7 Bolts only. Torque values for Bolts over 2-1/2” apply to L7 Bolts only.
** Lubricate uncoated Bolts and Nut Faces with API BUL 5A3 / ISO 13678 Thread Compound.
Appendix A
Hub Identification Worksheet
(For Clamps Click Here)
To determine the nominal size and pressure rating of any existing Hub Connection, measure the Hub
dimensions indicated on the drawing below and provide this information to WOODCO USA, or See
Hub Slide Rule Program.
O.D.
P.D.
MEASURE
HUB
MEASURE INSIDE DIAMETER THICKNESS
I.D.
THICKNESS
AT O.D.
NOTE: MEASURE RING GROOVE PITCH DIAMETER BY MEASURING FROM INSIDE EDGE OF RING
GROOVE ON ONE SIDE, TO OUTSIDE EDGE OF RING GROOVE ON OPPOSITE SIDE.
HUB 1.
HUB 2.
HUB 3.
HUB 4.
* To obtain more complete information about Hub Connection Equipment, see the WOODCO USA
Catalog for Pressure Control Equipment.
Appendix B
Clamp Identification Worksheet
(For Hubs Click Here)
To identify a Clamp by basic dimensions, measure the Clamp dimensions indicated on the drawing below and
provide this information to WOODCO USA, or See Clamp Slide Rule Program.
USING A SCALE OR
MEASURING TAPE:
2. MEASURE THE
INTERNAL GROOVE
HEIGHT (OR WIDTH).
3. MEASURE CLAMP
HEIGHT (OR WIDTH) AS
MEASURED THRU THE
I.D. BORE.
2 3
1 2 3
CLAMP INTERNAL GROOVE HEIGHT CLAMP HEIGHT
INSIDE DIAMETER (I.D.) MEASURED THRU I.D. MEASURED THRU I.D.
CLAMP 1.
CLAMP 2.
CLAMP 3.
CLAMP 4.
To obtain more information about WOODCO USA Clamps, click on this catalog’s Table of Contents.
To obtain more information about Clamp Hub Connection Equipment, see the WOODCO USA
Catalog for Pressure Control Equipment.
Appendix C
WOODCO USA
Number 6 API Spec 16A Clamp
(All API designated sizes available)
Appendix D
WOODCO USA
Number 14 API Spec 16A Clamp
(All API designated sizes available)
Appendix E
Appendix F