SOW - DEMOLITION & CONSTRUCTION
GENERAL SCOPE & CONDITION:
rv
Procurement, supply, fabrication, transport, lifting & shifting, inspection and erection of all
the material
Inspection of supplied material shall be done by HZL and in case of any fault then the
‘material shall be rejected
Labour supply supervision, gate pass management, wages management, accommodation,
food, drinking water and transportation of labours inside and outside plant premises under
vendor scope
All the necessary tools, equipment's and machineries
Machinery maintenance to be done outside plant premises. Only in case of necessity with
prior permission as per HZL procedure the maintenance shall be done at site.
Dedicated supervisor and a safety person at each activity area to be appointed
In ease of any delay from the vendor for the reason attributable to vendor, HZL shall
complete the job and deduct the same from the order value
Bidders shall submit all detalled drawings and final specifications after detailed engineering
for HZL approval before start of purchase/manufacturing.
‘Any deviation in the approved make/specifications should be avoided and in case itis
required, it must be done with prior approval of HZL only.
HSE REQUIREMENTS:
10.
100% compliance as per HZ1 Safety Standards & HZL LSR rules to be adhered by the Vendor
HZL standards Life Saving Rules (LSR) Violation will lead to levy of penalties as per policy,
Safety, Work at Height, Vehicle and driving, GESM, LOTO, Lifting & shifting, Excavation,
Confined space, Permit to work, PPE and Scaffolding standard must be followed.
The Vendor will strive for continual Improvement of Safety, Health & Environment at site to
achieve "Zero Harm” and follow all the relevant Safety Standards for Equipment’s as well as
Employees, Workers and safe guard them against all the possible Hazards & Risks
All required safety PPE will be in the Vendor's scope. The Vendor will provide all the safety
PPEs, like, High ankle fibre toe Safety Shoes, Safety Helmet, Hand Gloves, Safety Goggles,
Dust mask etc. as per M/S. HZL Safety Standards to the working personnel as per job
requirement.
‘The Vendor will provide Uniforms with Reflective Vest / Jacket to all his Staffs to bring in
discipline & ease of identification of his Staffs/employees
Allthe tools and tackles needed to be as per M/s. HZL norms & the same to be certified with
fitness tag affixed by M/s, HZL EIC
Double dose of COVID Vaccination should be taken by all persons and details/evidences to
be submitted during gate pass creation process
Risk assessment document/ JSA-lob safety analysis/ HIRA/SWMS to be discussed with and
‘Approved by M/s. HZL EIC before starting of the job
Work permit system and weekly safety gate meeting to be done
Before commencement of Jobs, every day Tool Box Talk (TBT) to be imparted to the working
staffs & the same is to be discussed with & approved by the M/S. HZL Engineer-In-Charge
ge