Construction Materials Group Assignment (15-20%) For 2 nd year’s Geomatics Eng, Do it by group of 7 students!! 1. Define the following terms in cement concrete concept A) Segregation B) Bleeding C) Workability D) Consistency 2. Why mild steel carbon steel type is the common metal used in construction industry especially in reinforced concrete structure? 3. What type of admixture would you recommend to be used i) To facilitate concreting hot weather and ii) For protecting hard concrete against cycles of freezing and thawing? Justify your reason? 4. What are the factors affecting the quality and strength of cement? 5. What does it mean by concrete mix design? What is the purpose of concrete mix design? 6. Using ACI method, determine the relative proportion of the ingredients of cement concrete for the first floor slab of 3m by 4m and depth of 150mm and reinforced bars are of diameter 10mm spaced center to center at 150mm in both directions. A 28 days comprehensive strength of 25Mpa is specified with the following aggregate properties. Coarse Aggregate - Bulk Density ( B) =1400kg/m3 - A sample weighs 200gm; it weighs 2100gm when surface saturated dry (SSD) condition and weighs 1000 gm after oven d ry. Fine Aggregate - Bulk Density ( ) = 1400kg/m3 - A sample weighs 1000 gm; it weighs 1100gm after surface saturated dry and 800gm after oven dry.
Assume Fineness modulus of the aggregate is 2.7 and % Air-entrained
Pengaruh Variasi Holding Time Dan Temperatur Paduan Polipropilena (PP) Dengan Serat Sabut Kelapa Terhadap Kekuatan Tarik Dan Bending Pada Proses Injection Molding
A Comparative Study of Mechanical Properties of Zinc Acrylate Epoxy nanocomposites Reinforced by AL2O3 and Cloisite®30B and Their Mixture: Tensile Strength and Fracture Toughness: A Comparative Study of Mechanical Properties of Zinc Acrylate Epoxy nanocomposites Reinforced by AL2O3 and Cloisite®30B and Their Mixture: Tensile Strength and Fracture Toughness