Professional Documents
Culture Documents
0 Cloud Optimization
XML
Structure
www.finchinasoft.com
Panel
Edge Hole
Basic
Structure
Milling Slot
www.finchinasoft.com
The Faces and Points Definition of Panel in XML
Face Definition
Put a panel on the desk.The top face
is marked as 5,and:
Bottom-6,front-2,back-1,left-4,-right-3.
Point Definition
Put a panel on the desk.The Lower left
corner is marked as 1. Mark clockwise
are 3,5,7.
They are 2,4,6,8 on the top face.
www.finchinasoft.com
Basic Information of Panel
www.finchinasoft.com
Basic Information of Panel
Order Field Order Field Note:
There are 10 additional
BatchNo:Fill in what you want Customer: Fill in what you want
fields to fill in what you
BatchIndex: Fill in what you want Contact: Fill in what you want want.they are
OrderNo: Fill in what you want AssembleNo: Fill in what you want Info1~Info10.
Dealer: Fill in what you want AssembleAdress: Fill in what you want
ProdutionNo: Fill in what you want Designer: Fill in what you want
ProductionName: Fill in what you Clerk: Fill in what you want
want Price: Fill in what you want
OrderDescription: Fill in what you EBL1:the edge note of Face2
want EBL2:the edge note of Face1
ContractNo: Fill in what you want EBW1:the edge note of Face4
OrderDate:The data type is date EBW2:the edge note of Face3
DeliveryDate: The data type is date PanelNo: Fill in what you want
Memo: Fill in what you want
www.finchinasoft.com
Hole
Hole in top face: Hole in left face : Hole in right face :
<Machining <Machining <Machining
ID="3310688" Type="2" ID="3310691" Type="1" ID="3310709" Type="1"
IsGenCode="2" IsGenCode="2" Face="4" IsGenCode="2" Face="3"
Face="5" X="100" X="0" Y="448" Z="9" X="404" Y="396" Z="9"
Y="402" Diameter="5" Diameter="8" Diameter="8"
Depth="3"/> Depth="27"/> Depth="28"/>
www.finchinasoft.com
Hole
www.finchinasoft.com
Slot
The slot of top face: Slot Attribute Slot Attribute Note:
<Machining ID="3310748" XY:the start coordinate of
If the slot is marked
ID:the mark of slot.it must
Type="4" IsGenCode="2" on the bottom
be different in the same slot,the origin is as same as
Face=“5" X="342" Y="18" face,the ToolOffset is
Depth="6" Width="10" panel. the hole. contrary to top face.
ToolName="xd10" Type:it is the same as the EndXY: the end coordinate
ToolOffset="右" EndX="0" hole. of slot.
EndY="18"/> IsGenCode: it is the same as Width:the slot’s width
the hole. Depth:the slot’s depth
The slot of bottom face:
ToolName:the toolname of
<Machining ID=“3310748”
Type=“4” slot
IsGenCode=“2” ToolOffset:it has three
Face=“6” X=“342” values:use Chinese symbol”
Y=“18” Depth=“6” 左、中、右”.the offset of the
Width=“10”
tool.
ToolName=“xd10”
ToolOffset=“左" EndX="0"
EndY="18"/>
www.finchinasoft.com
Milling
www.finchinasoft.com
Milling
www.finchinasoft.com
Milling
Milling: Milling Attribute Milling Attribute
<Machining XYZ:the start coordinate of
ID:the mark of Milling.it
ID=“3310948”
must be different in the same milling.the origin is as same
Type=“1/2/3/4"
IsGenCode="2" panel. as the hole.
Face=“1/2/3/4/5/6" X="0" Type:it is the same as the EndXYZ:Next point’s
Y="50" Depth="18" hole. coordinate.
ToolName="yxxd" IsGenCode: it is the same as Depth:Milling’s depth
ToolOffset="右" ToolName:toolname of
the hole.
EdgeABThickness="1.5">
EdgeABThickness:The milling
<Lines>
<Line LineID="1" edgeband of the milling. ToolOffset: it has three
EndX="50" EndY="0" values:use Chinese symbol”
EndZ="18" Angle="-90" /> 左、中、右”.the offset of the
</Lines> tool.
</Machining> Angle:the angle of the arc.If
0,it is a line.
www.finchinasoft.com
Milling
Pocket Routing: Pocket Attribute Note:
<Machining ID="11" Pocket requirement:
IsArea:It is marked to
Type="3" IsGenCode="2" The profile must be
pocket routing. Two
Face="5" X="200" Y="150" closed,the first point is as
Z="8" Depth="10" value:true and false. same as the last point.
ToolName="xd6" AreaType: It is marked to
ToolOffset="右" pocket type.Four type:0 is
EdgeABThickness="0" free form pocket,1 is
IsArea="true"
rectangle pocket,2 is round
AreaType="3">
pocket,3 is arc rectangle
<Lines><Line LineID="1"
EndX="300" EndY="150" pocket.
EndZ="8" Angle="180" />
<Line LineID="2"
EndX="200" EndY="150"
EndZ="8" Angle="180"/>
</Lines></Machining>
www.finchinasoft.com
Edgeband
Edgeband:
<EdgeGroup X1="0" Y1="0">
<Edge Face="1"
Thickness="1.5" Pre_Milling="0"
X="0" Y="0" CentralAngle="0"
/>
<Edge Face="2" Edgeband Attribute
Thickness="1.5" Pre_Milling="0"
Face:four side face.
X="0" Y="0" CentralAngle="0"
/> Thickness:the thickness of
<Edge Face="3" the edgeband
Thickness="1.5" Pre_Milling="0" Pre_Milling:
X="0" Y="0" CentralAngle="0"
/>
<Edge Face="4"
Thickness="1.5" Pre_Milling="0"
X="0" Y="0" CentralAngle="0"
/></EdgeGroup>
www.finchinasoft.com
Thank You