You are on page 1of 4

Eth1:192.168.5.

Eth1:192.168.4.3 (WL) A B
X Eth1:192.168.5.4
Eth 1 Eth 2
A A Eth1 : 192.168.4.5 (WL) B
Eth 1
Eth1:192.168.4.2 (WL) Eth1 :192.168.5.1
Eth2:192.168.6.4 B
A
Configured as a Eth1:192.168.5.2

Eth1:192.168.4.4 (WL) router


Wired LAN :192.168.5.0
Wireless LAN:192.168.4.0

Eth 2
Eth1:192.168.4.1(WL) Y Hub
Eth2:192.168.6.3
Configured as a
router

Eth 1

Configured as a
Control Room :192.168.6.0 Z router
Eth1:192.168.6.1
Eth2:192.168.3.185 (WL)

Eth 2
PURPLE denotes WIRELESS
links. Also (WL) means that
Ethernet card is wireless To College

• Now we provide routing tables for all machines.


• The machines named A will have similar routing tables as given below
• Consider this to be the routing table of machine with IP : 192.168.4.5
• U means the route is UP (available)
• H means it is route to a host (else it is route to a network )
• G means the route uses an external gateway ( in other words this machine sends it
to another router whose IP is specified in gateway column
Table fot 192.168.4.5

Destination Gateway GenMask Flags Interface


Address
192.168.4.5 * 255.255.255.255 UH Eth1

192.168.3.0 192.168.4.1 255.255.255.0 UG Eth1

192.168.4.0 * 255.255.255.0 U Eth1

127.0.0.1 * 255.0.0.0 U Lo
default 192.168.4.1 255.255.255.0 UG Eth1

Table for Machine B with IP : 192.168.5.2


Destination Gateway GenMask Flags Interface
Address

192.168.5.2 * 255.255.255.255 UH Eth1

192.168.3.0 192.168.5.1 255.255.255.0 UG Eth1

192.168.5.0 * 255.255.255.0 U Eth1

127.0.0.1 * 255.0.0.0 U Lo

Default 192.168.5.1 0.0.0.0 UG Eth1

Table for X
Destination Gateway GenMask Flags Interface
Address

192.168.5.1 * 255.255.255.255 UH Eth1

192.168.6.4 * 255.255.255.255 UH ETh2

192.168.3.0 192.168.6.1 255.255.255.0 UG Eth2

192.168.6.0 * 255.255.255.0 U Eth2

192.168.5.0 * 255.255.255.0 U Eth1

127.0.0.1 * 255.0.0.0 U Lo

Default 192.168.6.1 0.0.0.0 UG Eth2

Table for Y

Destination Gateway GenMask Flags Interface


Address

192.168.4.1 * 255.255.255.255 UH Eth1

192.168.6.3 * 255.255.255.255 UH ETh2

192.168.3.0 192.168.6.1 255.255.255.0 UG Eth2

192.168.6.0 * 255.255.255.0 U Eth2

192.168.4.0 * 255.255.255.0 U Eth1

127.0.0.1 * 255.0.0.0 U Lo

Default 192.168.6.1 0.0.0.0 UG Eth2

Table for Z
Destination Gateway GenMask Flags Interface
Address

192.168.6.1 * 255.255.255.255 UH Eth1

192.168.3.185 * 255.255.255.255 UH ETh2

192.168.3.0 * 255.255.255.0 U Eth2

192.168.6.0 * 255.255.255.0 U Eth1

192.168.5.0 192.168.6.4 255.255.255.0 UG Eth1

192.168.4.0 192.168.6.3 255.255.255.0 UG Eth1

127.0.0.1 * 255.0.0.0 U Lo
Default 192.168.3.1 0.0.0.0 UG Eth2

You might also like