Professional Documents
Culture Documents
Introduction 6
Over 50 years of Innovation 7
Forged Steel Valves 8
Certification 8
Qualification 9
Cross References 10
Components 12
Materials 14
Forged Valve Data 16
Gate Valves 18-32
Bolted Bonnet - Full and Reduced Bore - Class 800 and 1500 20
Weled Bonnet - Full and Reduced Bore - Class 800 and 1500 24
Bolted Bonnet - Weled Bonnet - Extended Body - Class 800 and 1500 28
Bolted Bonnet - Weled Bonnet - Reinforced Extended Body - Class 800 and 1500 30
Special Service 31
Bolted Bonnet - Full and Reduced Bore - Class 800 and 1500 36
3
INDEX
Weled Bonnet - Full and Reduced Bore - Class 800 and 1500 40
Weled Bonnet - Full Bore (Y type) - Class 800 -1500 - 2500 - 4500 44
Bolted Bonnet - Full and Reduced Bore - Class 800 and 1500 50
Weled Bonnet - Full and Reduced Bore - Class 800 and 1500 54
Weled Bonnet - Full Bore (Y type) - Class 800 -1500 - 2500 - 4500 58
Bolted Bonnet - Full and Reduced Bore - Class 150 - 300 - 600 - 800 - 1500 70
Bolted Bonnet - Welded Bonnet - Full and Reduced Bore - Class 800 to 2700 78
Eco-L-Velves® 81-86
Technical Data 87
Pressure Temperature Ratings 88
Flanged Dimension 93
4
INDEX
End Connections 96
Conversion Charts 98
5
INTRODUCTION
6
OVER 50 YEARS OF INNOVATION
7
CERTIFICATION
ISO 9001
Calobri operates a fully certified Quality Assurance programme according
to ISO9001 which has been recently upgraded. All major suppliers are
also fully certified to meet the most stringent international standard of
Quality and performance.
CE Mark - PED
Calobri has been audited and approved by TUV to the new European
Community Pressure Equipment Directive which defines a set of design
and manufacturing procedures as a minimum standard to ensure that
products supplied meet specified safety and performance criteria.
8
QUALIFICATION
VALVE ENGINEERING
Calobri has extensive experience in designing valves for severe applications.
Calobri developed and patented the monoflange design to meet the
requirement for a compact lightweight valve for offshore installation.
VALVE MANUFACTURING
Calobri has a skilled labour force and a set of high capacity specialized
equipment. Calobri uses only forgings from Italy to guarantee the best quality
finished products.
PRODUCT LINE
9
CROSS REFERENCES
1/2” thru 2”
GATE VALVE
CHECK VALVE
10
CROSS REFERENCES
1/2” thru 2”
GLOBE VALVE
API TRIM DESIGNTIONS AND OTHER PRODUCTS ARE AVAILABLE FROM CALOBRI
11
COMPONENTS
SEATS
NAMEPLATE
MARKING
Calobri valves bodies and bonnets show clearly embossed the material
grade and the heat number (forging code) which allows complete lot
traceability.
The body marking include as well as standard Calobri logo, pressure
rating and valve bore dimension. Flow directional arrow is embossed on
unidirectional valves such as globe and check.
12
COMPONENTS
PACKING
GASKET
13
MATERIALS
CALOBRI valves are manufactured in a wide range of materials, supplied by the best available steel mills, forged by
well known forgery with outstanding equipment and experience. All the material can be certified in the chemical
composition and the mechanical characteristic.
BODY AND
BODY AND BONNET
BONNET MATERIALS
MATERIALS
Material Common Casting Spec. DIN
Nominal Type UNS Forging Spec. DIN Application Notes
Group Name Equivalent W. No
General non-corrosive service
Carbon Steel CS C-Mn-Fe K03504 A105N A216-WCB C22.8 DIN 17243 1.0460 from -20F(-29C) to 800F(427C)
A352-LCA
Low Temperature
LTCS C-Mn-Fe K03011 A350-LF2 A352-LCB TSTE 355 DIN 18103 1.0566 General non-corrosive service from -50F
Carbon Steel (-46C) to 650F(340C), LF2 to 800F(427C).
A352-LCC
Low Temperature
Nickel Steel 3.1/2Ni K32025 A350-LF3 A352-LC3 10Ni14 1.5637 -150F(-101C) to 650F(340C)
Alloy Steel
Moly Steel C-1/2Mo K12822 A182-F1 A217-WC1 15MO3 1.5415 Up to 875F (468C)
1.1/4Cr-1/2Mo K11572 A182-F11 cl2 A217-WC6 13CRMO44 1.7335 Up to 1100F (593C)
Low Alloy Steel
Chrome Moly
5Cr-1/2Mo K41545 A182-F5 A217-C5 12CRMO195 1.7362 High temp refinery service
9Cr-1Mo K90941 A182-F9 A217-C12 X 12 CrMo 9 1 1.7386 High temp erosive refinery service
9Cr-1Mo-V A182-F91 A217-C12A X 10 CrMoVNb 9 1 1.4903 High pressure steam
304 : 18Cr-8Ni S30400 A182-F304 A351-CF8 DIN X5CrNi 18 9 1.4301 0.04% min. carbon for temp.>1000F(538C)
304L : 18Cr-8Ni S30403 A182-F304L A351-CF3 X 2 CrNi 19 11 1.4306 Up to 800F(427C)
304H : S30409 A182-F304H n/a n/a
316 : 16Cr-12Ni-2Mo S31600 A182-F316 A351-CF8M DIN X5CrNiMo 18 10 1.4401 0.04% min. carbon for temp.>1000F(538C)
316L : 16Cr-12Ni-2Mo S31603 A182-F316L A351-CF3M X 5 CrNiMo 17 12 2 1.4404 Up to 800F(427C)
300 series S.Steel
Austenitic S.Steel
14
MATERIALS
The following tables suggest standard combination of body and bonnet materials and trim (stem, disc or wedge, seat)
composition. Different combinations are available uppon request.
TRIM STANDARD
TRIM STANDARD MATERIALS
MATERIALS
ASME B 16.34 - Steel Valves, Flanged and Buttwelded Ends MR 01.75 - Metallic Material for Oil Field Equipment
MSS SP 25 - Standard Marking System for Valves, DIN 3202 - End to End dimensions of
Fittings, Flanges and Unions ferrous valves
15
VALVE DATA FORGED STEEL
GATE VALVES
GATE VALVES
Gate valves are bi-directional valves ideally suited for on-off duties. CALOBRI produces various types both with parallel
face gates or with wedge gates. These valves have a very low resistance to flow, which in the case of parallel gate valves
approaches that of a straight pipe. They are used for duties with high pressure fluids due to the fact that upstream
pressure helps the sealing between gate and seat.
CALOBRI takes great care to study finish of seating surfaces to guarantee their minimum wear under high pressures.
Gate valves are supplied in various models to cover the most different and delicate services.
CLASS CONNECTION PORT STANDARD Screw & Yoke ENDS SERVICE CALOBRI
800 Bolted bonnet Reduced API602-BS5352 Outside Threaded and Socket Weld Ends - S8
800 Bolted bonnet Full API602-BS5352 Outside Threaded and Socket Weld Ends - S88
800 Welded Bonnet Reduced API602-BS5352 Outside Threaded and Socket Weld Ends - W-S8
800 Welded Bonnet Full API602-BS5352 Outside Threaded and Socket Weld Ends - W-S88
1500 Bolted bonnet Reduced API602-BS5352 Outside Threaded and Socket Weld Ends - S15
1500 Bolted bonnet Full API602-BS5352 Outside Threaded and Socket Weld Ends - S1515
1500 Welded Bonnet Reduced API602-BS5352 Outside Threaded and Socket Weld Ends - W-S15
1500 Welded Bonnet Full API602-BS5352 Outside Threaded and Socket Weld Ends - WS1515
1500 Ring Joint BB Full BS5352 Outside Threaded and Socket Weld Ends - RJ-S1515
2500 Ring Joint BB Full ANSI B16.34 Outside Threaded and Socket Weld Ends - RJ-S25
2500 Welded Bonnet Full ANSI B16.34 Outside Threaded and Socket Weld Ends - W-S25
800 Welded Bonnet Reduced API602 Outside Extended Body - Male Threaded - W-S8EB-A
800 Welded Bonnet Reduced API602 Outside Extended Body - Male Socket - W-S8EB-B
800 Welded Bonnet Reduced API602 Outside Extended Body - BW - W-S8EB-C
800 Bolted bonnet Reduced API602 Outside Extended Body - Male Threaded - S8EB-A
800 Bolted bonnet Reduced API602 Outside Extended Body - Male Socket - S8EB-B
800 Bolted bonnet Reduced API602 Outside Extended Body - BW - S8EB-C
800 Welded Bonnet Reduced API602 Outside Extended Body - Reinforced - BW - W-S8EB-D
800 Welded Bonnet Reduced API602 Outside Extended Body - Reinforced - LIP W-S8EB-W
800 Bolted bonnet Reduced API602 Outside Extended Body - Reinforced - BW - S8EB-D
800 Bolted bonnet Reduced API602 Outside Extended Body - Reinforced - LIP S8EB-W
1500 Welded Bonnet Reduced API602 Outside Extended Body - Male Threaded - W-S15EB-A
1500 Welded Bonnet Reduced API602 Outside Extended Body - Male Socket - W-S15EB-B
1500 Welded Bonnet Reduced API602 Outside Extended Body - BW - W-S15EB-C
1500 Bolted bonnet Reduced API602 Outside Extended Body - Male Threaded - S15EB-A
1500 Bolted bonnet Reduced API602 Outside Extended Body - Male Socket - S15EB-B
1500 Bolted bonnet Reduced API602 Outside Extended Body - BW - S15EB-C
1500 Welded Bonnet Reduced API602 Outside Extended Body - Reinforced - BW - W-S15EB-D
1500 Welded Bonnet Reduced API602 Outside Extended Body - Reinforced - LIP W-S15EB-W
1500 Bolted bonnet Reduced API602 Outside Extended Body - Reinforced - BW - S15EB-D
1500 Bolted bonnet Reduced API602 Outside Extended Body - Reinforced - LIP S15EB-W
800 Bolted bonnet Reduced API602-BS5352 Outside Threaded and Socket Weld Ends Sour Service SS-S8
800 Welded Bonnet Reduced API602-BS5352 Outside Threaded and Socket Weld Ends Alkylation AS-WS8
800 Welded Bonnet Reduced API602-BS5352 Outside Threaded and Socket Weld Ends Vacuum SV-WS8
800 Bolted bonnet Reduced API602-BS5352 Outside Threaded and Socket Weld Ends Chlorine CS-S8
18
GATE VALVES
CLASS 800
FULL BORE REDUCED BORE
SIZE inch 1/4 3/8 1/2 3/4 1 1.1/4 1.1/2 2 SIZE inch 1/2 3/4 1 1.1/4 1.1/2 2
mm 6 10 15 20 25 32 40 50 mm 15 20 25 32 40 50
A inch 3.14 3.14 3.54 4.33 5.00 5.00 5.00 8.26 A inch 3.14 3.54 4.33 5.00 5.00 5.00
mm 80 80 90 110 127 127 127 210 mm 80 90 110 127 127 127
B Open inch 5.86 5.86 6.41 7.00 8.26 9.56 10.3 14.3 B Open inch 5.86 6.41 7.00 8.26 9.56 10.3
mm 148 148 163 178 210 243 262 365 mm 148 163 178 210 243 262
C inch 0.31 0.38 0.55 0.70 0.94 1.18 1.45 1.89 C inch 0.38 0.55 0.70 0.94 1.18 1.45
mm 8 9.6 14 18 24 30 37 48 mm 9.6 14 18 24 30 37
Handwheel inch 3.14 3.14 3.14 4.33 4.33 5.11 5.11 7.08 Handwheel inch 3.14 3.14 4.33 4.33 5.11 5.11
mm 80 80 80 110 110 130 130 180 mm 80 80 110 110 130 130
WEIGHT lb 3.5 3.5 4.8 7.7 11 14.3 19.8 47.3 WEIGHT lb 3.5 4.8 7.7 11 14.3 19.8
kg 1.6 1.6 2.2 3.5 5 6.5 9 21.5 kg 1.6 2.2 3.5 5 6.5 9
FIGURE S88 FIGURE S8
PACKING T2 T2 T2 T4 T5 T6 T6 T8 PACKING T2 T2 T4 T5 T6 T6
GASKET 40x30 40x30 40x30 48x38 54x44 66x54 74x60 95x78 GASKET 40x30 40x30 48x38 54x44 66x54 74x60
CLASS 1500
FULL BORE REDUCED BORE
SIZE inch 1/4 3/8 1/2 3/4 1 1.1/4 1.1/2 2 SIZE inch 1/2 3/4 1 1.1/4 1.1/2 2
mm 6 10 15 20 25 32 40 50 mm 15 20 25 32 40 50
A inch 3.54 3.54 4.33 5.00 5.00 5.00 8.26 8.26 A inch 3.54 4.33 5.00 5.00 5.00 8.26
mm 90 90 110 127 127 127 210 210 mm 90 110 127 127 127 210
B Open inch 5.70 6.29 6.89 8.26 9.45 10.2 13.9 14.1 B Open inch 6.29 6.89 8.26 9.45 10.2 13.9
mm 145 160 175 210 240 260 355 360 mm 160 175 210 240 260 355
C inch 0.31 0.38 0.55 0.70 0.94 1.18 1.45 1.57 C inch 0.38 0.55 0.70 0.94 1.18 1.45
mm 8 9.6 14 18 24 30 37 40 mm 9.6 14 18 24 30 37
Handwheel inch 3.14 3.14 4.33 4.33 5.11 5.11 7.08 7.08 Handwheel inch 3.14 4.33 4.33 5.11 5.11 7.08
mm 80 80 110 110 130 130 180 180 mm 80 110 110 130 130 180
WEIGHT lb 4.8 4.8 8.3 12.1 14.9 20.9 49.5 48.4 WEIGHT lb 4.8 8.3 12.1 14.9 20.9 49.5
kg 2.2 2.2 3.8 5.5 6.8 9.5 22.5 22 kg 2.2 3.8 5.5 6.8 9.5 22.5
FIGURE S1515 FIGURE S15
PACKING T4 T4 T5 T25 T6 T27 T8 T918 PACKING T4 T5 T25 T6 T27 T8
GASKET 40x30 40x30 40x30 48x38 54x44 66x54 74x60 74x60 GASKET 40x30 40x30 48x38 54x44 66x54 74x60
20
GATE VALVES
CLASS 1500
FULL BORE
SIZE inch 1/4 3/8 1/2 3/4 1 1.1/4 1.1/2 2
mm 6 10 15 20 25 32 40 50
A inch - - 4.33 5.90 5.90 - 8.26 9.25
mm - - 110 150 150 - 210 235
CLASS 2500
FULL BORE
SIZE inch 1/4 3/8 1/2 3/4 1 1.1/4 1.1/2 2
mm 6 10 15 20 25 32 40 50
A inch - - 5.90 5.90 8.26 - 9.25 9.25
mm - - 150 150 210 - 235 235
22
GATE VALVES
21
GATE VALVES
CLASS 800
FULL BORE REDUCED BORE
SIZE inch 1/4 3/8 1/2 3/4 1 1.1/4 1.1/2 2 SIZE inch 1/2 3/4 1 1.1/4 1.1/2 2
mm 6 10 15 20 25 32 40 50 mm 15 20 25 32 40 50
A inch 3.14 3.14 3.54 4.33 5.00 5.00 5.00 8.26 A inch 3.14 3.54 4.33 5.00 5.00 5.00
mm 80 80 90 110 127 127 127 210 mm 80 90 110 127 127 127
B Open inch 3.14 5.86 6.41 7.00 8.26 9.56 10.3 14.3 B Open inch 5.86 6.41 7.00 8.26 9.56 10.3
mm 148 148 163 178 210 243 262 365 mm 148 163 178 210 243 262
C inch 0.31 0.38 0.55 0.70 0.94 1.18 1.45 1.89 C inch 0.38 0.55 0.70 0.94 1.18 1.45
mm 8 9.6 14 18 24 30 37 48 mm 9.6 14 18 24 30 37
Handwheel inch 3.14 3.14 3.14 4.33 4.33 5.11 5.11 7.08 Handwheel inch 3.14 3.14 4.33 4.33 5.11 5.11
mm 80 80 80 110 110 130 130 180 mm 80 80 110 110 130 130
WEIGHT lb 3.5 3.5 4.8 7.7 11 13.8 17.6 37.4 WEIGHT lb 3.5 4.8 7.7 11 13.8 17.6
kg 1.6 1.6 2.2 3.5 5 6.3 8 17 kg 1.6 2.2 3.5 5 6.3 8
FIGURE WS88 FIGURE WS8
PACKING T2 T2 T2 T4 T5 T6 T6 T8 PACKING T2 T2 T4 T5 T6 T6
CLASS 1500
FULL BORE REDUCED BORE
SIZE inch 1/4 3/8 1/2 3/4 1 1.1/4 1.1/2 2 SIZE inch 1/2 3/4 1 1.1/4 1.1/2 2
mm 6 10 15 20 25 32 40 50 mm 15 20 25 32 40 50
A inch 3.54 3.54 4.33 5.00 5.00 5.00 8.26 8.26 A inch 3.54 4.33 5.00 5.00 5.00 8.26
mm 90 90 110 127 127 127 210 210 mm 90 110 127 127 127 210
B Open inch 5.70 6.29 6.89 8.26 9.45 10.2 13.9 14.1 B Open inch 6.29 6.89 8.26 9.45 10.2 13.9
mm 145 160 175 210 240 260 355 360 mm 160 175 210 240 260 355
C inch 0.31 0.38 0.55 0.70 0.94 1.18 1.45 1.57 C inch 0.38 0.55 0.70 0.94 1.18 1.45
mm 8 9.6 14 18 24 30 37 40 mm 9.6 14 18 24 30 37
Handwheel inch 3.14 3.14 4.33 4.33 5.11 5.11 7.08 7.08 Handwheel inch 3.14 4.33 4.33 5.11 5.11 7.08
mm 80 80 110 110 130 130 180 180 mm 80 110 110 130 130 180
WEIGHT lb 4.8 4.8 8.3 12.1 15 19.8 39.6 38.5 WEIGHT lb 4.8 8.3 12.1 15 19.8 39.6
kg 2.2 2.2 3.8 5.5 6.8 9 18.0 17.5 kg 2.2 3.8 5.5 6.8 9 18.0
FIGURE WS1515 FIGURE WS15
PACKING T4 T4 T5 T25 T6 T27 T8 T918 PACKING T4 T5 T25 T6 T27 T8
24
GATE VALVES
Class 2500
Welded Bonnet - Full Bore
GATE VALVES
CLASS 2500
FULL BORE
SIZE inch 1/4 3/8 1/2 3/4 1 1.1/4 1.1/2 2
mm 6 10 15 20 25 32 40 5
A inch - - 5.00 5.00 5.00 - 9.25 9.25
mm - - 127 127 127 - 235 235
26
GATE VALVES
Design construction:
API 602
Testing according to API 598 - BS 6755
Marking MSS SP25
Ratings:
- carbon steel class 800 1975 psig @ 100° F
138 bar + 38° C
- carbon steel class 1500 3705 psig @ 100° F
255 bar + 38° C
BOLTED BONNET
CLASS 800 CLASS 1500
SIZE inch 1/2 3/4 1 1.1/2 2 SIZE inch 1/2 3/4 1 1.1/2 2
mm 15 20 25 40 50 mm 15 20 25 40 50
A inch 5.82 6.02 7.16 8.50 10.4 A inch 6.02 7.16 8.50 10.4 10.4
mm 148 153 182 216 264 mm 153 182 216 264 264
A1 inch 4.25 4.25 5.00 6.00 7.87 A1 inch 4.25 5.00 6.00 7.87 7.44
mm 108 108 127 152 200 mm 108 127 152 200 189
B Open inch 5.82 6.41 7.00 9.56 10.3 B Open inch 6.41 7.00 8.26 10.3 13.9
mm 148 163 178 243 262 mm 163 178 210 262 355
C inch 0.38 0.55 0.70 1.18 1.45 C inch 0.38 0.55 0.70 1.18 1.45
mm 9.6 14 18 30 37 mm 9.6 14 18 30 37
Handwheel inch 3.14 3.14 4.33 5.11 5.11 Handwheel inch 3.14 4.33 4.33 5.11 7.08
mm 80 80 110 130 130 mm 80 110 110 130 180
WEIGHT lb 4.6 6.2 9.7 18.3 26.4 WEIGHT lb 6.8 10.6 16.5 26.4 48.7
kg 2.1 2.8 4.4 8.3 12 kg 3.1 4.8 7.5 12 22.1
FIGURE S8EB FIGURE S15EB
PACKING T2 T4 T5 T6 T8 PACKING T5 T25 T6 T8 T918
GASKET 40x30 48x38 54x44 74x60 95x78 GASKET 40x30 48x38 54x44 74x60 74x60
WELDED BONNET
CLASS 800 CLASS 1500
SIZE inch 1/2 3/4 1 1.1/2 2 SIZE inch 1/2 3/4 1 1.1/2 2
mm 15 20 25 40 50 mm 15 20 25 40 5
A inch 5.82 6.02 7.16 8.50 10.4 A inch 6.02 7.16 8.50 10.4 10.4
mm 148 153 182 216 264 mm 153 182 216 264 264
A1 inch 4.25 4.25 5.00 6.00 7.87 A1 inch 4.25 5.00 6.00 7.87 7.44
mm 108 108 127 152 200 mm 108 127 152 200 189
B Open inch 5.82 6.41 7.00 9.56 10.3 B Open inch 6.41 7.00 8.26 10.3 13.9
mm 148 163 178 243 262 mm 163 178 210 262 355
C inch 0.38 0.55 0.70 1.18 1.45 C inch 0.38 0.55 0.70 1.18 1.45
mm 9.6 14 18 30 37 mm 9.6 14 18 30 37
Handwheel inch 3.14 3.14 4.33 5.11 5.11 Handwheel inch 3.14 4.33 4.33 5.11 7.08
mm 80 80 110 130 130 mm 80 110 110 130 180
WEIGHT lb 4.6 6.2 9.7 17.8 23.2 WEIGHT lb 6.8 10.6 16.5 25.3 46.5
kg 2.1 2.8 4.4 8.1 10.5 kg 3.1 4.8 7.5 11.5 21.1
FIGURE WS8EB FIGURE WS15EB
PACKING T2 T4 T5 T6 T8 PACKING T5 T25 T6 T8 T918
28
GATE VALVES
A1 inch 6.14 6.88 7.44 7.91 8.11 A1 inch 6.88 7.44 7.91 8.11 6.50
mm 156 175 189 201 206 mm 175 189 201 206 165
B Open inch 5.82 6.41 7.00 9.56 10.3 B Open inch 6.41 7.00 8.26 10.3 13.9
mm 148 163 178 243 262 mm 163 178 210 262 355
C inch 0.38 0.55 0.70 1.18 1.45 C inch 0.38 0.55 0.70 1.18 1.45
mm 9.6 14 18 30 37 mm 9.6 14 18 30 37
Handwheel inch 3.14 3.14 4.33 5.11 5.11 Handwheel inch 3.14 4.33 4.33 5.11 7.08
mm 80 80 110 130 130 mm 80 110 110 130 180
WEIGHT lb 6.6 7.0 11.0 20.9 27.5 WEIGHT lb 7.7 11.9 17.8 29.7 53.0
kg 3 3.2 5 9.5 12.5 kg 3.5 5.4 8.1 13.5 24.1
FIGURE S8EB FIGURE S15EB
PACKING T2 T4 T5 T6 T8 PACKING T2 T2 T4 T6 T6
GASKET 40x30 48x38 54x44 74x60 95x78 GASKET 40x30 40x30 48x38 66x54 74x60
WELDED BONNET
CLASS 800 CLASS 1500
SIZE inch 1/2 3/4 1 1.1/2 2 SIZE inch 1/2 3/4 1 1.1/2 2
mm 15 20 25 40 50 mm 15 20 25 40 5
A inch 7.71 8.66 9.60 10.4 10.6 A inch 8.66 9.60 10.4 10.6 10.6
mm 196 220 244 265 270 mm 220 244 265 270 270
A1 inch 6.14 6.88 7.44 7.91 8.11 A1 inch 6.88 7.44 7.91 8.11 6.50
mm 156 175 189 201 206 mm 175 189 201 206 165
B Open inch 5.82 6.41 7.00 9.56 10.3 B Open inch 6.41 7.00 8.26 10.3 13.9
mm 148 163 178 243 262 mm 163 178 210 262 355
C inch 0.38 0.55 0.70 1.18 1.45 C inch 0.38 0.55 0.70 1.18 1.45
mm 9.6 14 18 30 37 mm 9.6 14 18 30 37
Handwheel inch 3.14 3.14 4.33 5.11 5.11 Handwheel inch 3.14 4.33 4.33 5.11 7.08
mm 80 80 110 130 130 mm 80 110 110 130 180
WEIGHT lb 6.6 7.0 11.0 20.5 27.5 WEIGHT lb 7.7 11.9 17.8 28.6 50.9
kg 3 3.2 5 9.3 12.5 kg 3.5 5.4 8.1 13 23.1
FIGURE WS8EB FIGURE WS15EB
PACKING T5 T25 T6 T8 T918 PACKING T4 T5 T25 T27 T8
30
GATE VALVES SPECIAL SERVICE
Sour Service NACE STANDARD MR-01-75
MATERIAL
CLASS 800 RATINGS
API 602 - BS 5352 Body/Bonnet Trim Bolting
Regular Port
BOLTED Full Port on request 1975 psi @ 100°F
BONNET Other ratings
Outside page 86 type
Dimensions on page 18 410 HFS
Screw and Carbon Steel B7M
Yoke type 316
CLASS 1500
Solid Wedge API 602 - BS 5352 3705 psi @ 100°F
Regular Port Other ratings
page 86
Dimensions on page 18
Welded Bonnet type on request
31
GATE VALVES OPTIONS
LOCKING POSITION
DEVICE INDICATOR
FLEXIBLE PTFE
WEDGE INSERT ON SEAT
32
GLOBE VALVES
31
GLOBE VALVES
Globe valve are closing-down valves in which the closure member is moved squarely on and off the seat. In this way
the opening of the port is directly proportional to the travel of the disc. This proportional relationship is ideally suited
for duties requiring regulation of flow rate. To have further precision in regulation, the disc element can be available
in the parabolic, needle, vee-port types. Furthermore, the short travel of the disc between the open and closed posi-
tion makes these valves ideally suited for on-off duties when they must be opened and closed frequently. Globe valves
are uni-directional valves and are installed so that fluid pressure is under the disc. They are supplied in various models
to cover the different services.
CLASS CONNECTION PORT STANDARD Screw & Yoke ENDS SERVICE CALOBRI
800 Bolted bonnet Reduced BS5352 Outside Threaded and Socket Weld Ends - D8
800 Bolted bonnet Full BS5352 Outside Threaded and Socket Weld Ends - D88
800 Welded Bonnet Reduced BS5352 Outside Threaded and Socket Weld Ends - W-D8
800 Welded Bonnet Full BS5352 Outside Threaded and Socket Weld Ends - W-D88
1500 Bolted bonnet Reduced BS5352 Outside Threaded and Socket Weld Ends - D15
1500 Bolted bonnet Full BS5352 Outside Threaded and Socket Weld Ends - D1515
1500 Welded Bonnet Reduced BS5352 Outside Threaded and Socket Weld Ends - W-D15
1500 Welded Bonnet Full BS5352 Outside Threaded and Socket Weld Ends - WD1515
1500 Ring Joint BB Full BS5352 Outside Threaded and Socket Weld Ends - RJ-D1515
2500 Ring Joint BB Full ANSI B16.34 Outside Threaded and Socket Weld Ends - RJ-D25
2500 Welded Bonnet Full ANSI B16.34 Outside Threaded and Socket Weld Ends - W-D25
4500 Ring Joint BB Full ANSI B16.34 Outside Threaded and Socket Weld Ends - RJ-D45
4500 Welded Bonnet Full ANSI B16.34 Outside Threaded and Socket Weld Ends - WD45
800 Welded Bonnet Full BS5352 Outside Threaded and Socket Weld Ends - YD88
1500 Welded Bonnet Full BS5352 Outside Threaded and Socket Weld Ends - YD1515
2500 Welded Bonnet Full ANSI B16.34 Outside Threaded and Socket Weld Ends - YD25
4500 Welded Bonnet Full ANSI B16.34 Outside Threaded and Socket Weld Ends - YD45
800 Bolted bonnet Reduced BS5352 Outside Threaded and Socket Weld Ends Sour Service SS-D8
800 Welded Bonnet Reduced BS5352 Outside Threaded and Socket Weld Ends Alkilation AS-WD8
800 Welded Bonnet Reduced BS5352 Outside Threaded and Socket Weld Ends Vacuum SV-WD8
800 Bolted bonnet Reduced BS5352 Outside Threaded and Socket Weld Ends Chlorine CS-D8
Eco-L-Valves ®
Calobri lmanufactures under OMB license an innovative solution to the Fugitive Emission issue: Eco-L-Valves
Special patented Short Pattern Bellows Seal valves , with dimension equal to standatd non-bellows valves and able to meet the severe
service conditions of standard bellows seal with a lower dimensional height and reduced cost impact.
34
GLOBE VALVES
Ratings:
- carbon steel class 800 1975 psig @ 100° F
138 bar + 38° C
- carbon steel class 1500 3705 psig @ 100° F
255 bar + 38° C
CLASS 800
FULL BORE REDUCED BORE
SIZE inch 1/4 3/8 1/2 3/4 1 1.1/4 1.1/2 2 SIZE inch 1/2 3/4 1 1.1/4 1.1/2 2
mm 6 10 15 20 25 32 40 50 mm 15 20 25 32 40 50
A inch 3.14 3.14 3.54 4.33 5.00 6.10 6.69 8.26 A inch 3.14 3.54 4.33 5.00 5.00 5.00
mm 80 80 90 110 127 155 170 210 mm 80 90 110 127 127 127
B Open inch 5.82 5.82 6.49 7.08 8.38 9.76 10.1 14.5 B Open inch 5.86 6.41 7.00 8.26 9.56 10.3
mm 148 148 165 180 213 248 257 370 mm 148 163 178 210 243 262
C inch 0.28 0.35 0.51 0.69 0.89 1.16 1.37 1.79 C inch 0.38 0.55 0.70 0.94 1.18 1.45
mm 7 9 13 17.5 22.5 29.5 35 45.5 mm 9.6 14 18 24 30 37
Handwheel inch 3.14 3.14 3.14 4.33 5.11 5.11 7.08 7.08 Handwheel inch 3.14 3.14 4.33 4.33 5.11 5.11
mm 80 80 80 110 130 130 180 180 mm 80 80 110 110 130 130
WEIGHT lb 3.7 3.7 5.0 7.9 12.1 16.5 25.5 48.5 WEIGHT lb 3.5 4.8 7.7 11 13.8 17.6
kg 1.7 1.7 2.3 3.6 5.5 7.5 11.6 22.0 kg 1.6 2.2 3.5 5 6.3 8
FIGURE D88 FIGURE D8
PACKING T2 T2 T3 T5 T25 T6 T27 T8 PACKING T2 T3 T5 T25 T6 T27
GASKET 40x30 40x30 40x30 48x38 54x44 66x54 74x60 95x78 GASKET 40x30 40x30 48x38 54x44 66x54 74x60
CLASS 1500
FULL BORE REDUCED BORE
SIZE inch 1/4 3/8 1/2 3/4 1 1.1/4 1.1/2 2 SIZE inch 1/2 3/4 1 1.1/4 1.1/2 2
mm 6 10 15 20 25 32 40 50 mm 15 20 25 32 40 50
A inch 3.54 3.54 4.33 5.00 6.10 6.69 8.26 8.26 A inch 3.54 4.33 5.00 6.10 6.69 8.26
mm 90 90 110 127 155 170 210 210 mm 90 110 127 155 170 210
B Open inch 6.29 6.29 6.88 8.26 9.60 9.84 14.5 14.7 B Open inch 6.29 6.88 8.26 9.60 9.84 14.5
mm 160 160 175 210 244 250 370 375 mm 160 175 210 244 250 370
C inch 0.28 0.35 0.51 0.67 0.83 1.10 1.30 1.48 C inch 0.35 0.51 0.67 0.83 1.10 1.30
mm 7 9 13 17 21 28 33 37.5 mm 9 13 17 21 28 33
Handwheel inch 3.14 3.14 4.33 5.11 5.11 7.08 7.08 7.08 Handwheel inch 3.14 4.33 5.11 5.11 7.08 7.08
mm 80 80 110 130 130 180 180 180 mm 80 110 130 130 180 180
WEIGHT lb 4.8 4.8 8.5 13.2 17.6 26.4 51.7 50.6 WEIGHT lb 4.8 8.5 13.2 17.6 26.4 51.7
kg 2.2 2.2 3.9 6 8 12 23.5 23 kg 2.2 3.9 6 8 12 23.5
FIGURE D1515 FIGURE D15
PACKING T3 T3 T5 T6 T6 T27 T8 T918 PACKING T3 T5 T6 T6 T27 T8
GASKET 40x30 40x30 40x30 48x38 54x44 66x54 74x60 74x60 GASKET 40x30 40x30 48x38 54x44 66x54 74x60
36
GLOBE VALVES
CLASS 1500
FULL BORE
SIZE inch 1/4 3/8 1/2 3/4 1 1.1/4 1.1/2 2
mm 6 10 15 20 25 32 40 50
A inch - - 4.33 5.90 5.90 - 8.26 9.25
mm - - 110 150 150 - 210 235
CLASS 2500
FULL BORE
SIZE inch 1/4 3/8 1/2 3/4 1 1.1/4 1.1/2 2
mm 6 10 15 20 25 32 40 50
A inch - - 5.90 5.90 8.26 - 9.25 9.25
mm - - 150 150 210 - 235 235
38
GLOBE VALVES
CLASS 800
FULL BORE REDUCED BORE
SIZE inch 1/4 3/8 1/2 3/4 1 1.1/4 1.1/2 2 SIZE inch 1/2 3/4 1 1.1/4 1.1/2 2
mm 6 10 15 20 25 32 40 50 mm 15 20 25 32 40 50
A inch 3.14 3.14 3.54 4.33 5.00 6.10 6.69 8.26 A inch 3.14 3.54 4.33 5.00 6.10 6.69
mm 80 80 90 110 127 155 170 210 mm 80 90 110 127 155 170
B Open inch 5.82 5.82 6.49 7.08 8.38 9.76 10.1 14.5 B Open inch 5.82 6.49 7.08 8.38 9.76 10.1
mm 148 148 165 180 213 248 257 370 mm 148 165 180 213 248 257
C inch 0.28 0.35 0.51 0.69 0.89 1.16 1.37 1.79 C inch 0.35 0.51 0.69 0.89 1.16 1.37
mm 7 9 13 17.5 22.5 29.5 35 45.5 mm 9 13 17.5 22.5 29.5 35
Handwheel inch 3.14 3.14 3.14 4.33 5.11 5.11 7.08 7.08 Handwheel inch 3.14 3.14 4.33 5.11 5.11 7.08
mm 80 80 80 110 130 130 180 180 mm 80 80 110 130 130 180
WEIGHT lb 3.7 3.7 5.0 7.9 12.1 16 23.1 38.5 WEIGHT lb 3.7 5.0 7.9 12.1 16 23.1
kg 1.7 1.7 2.3 3.6 5.5 7.3 10.5 17.5 kg 1.7 2.3 3.6 5.5 7.3 10.5
FIGURE WD88 FIGURE WD8
PACKING T2 T2 T3 T5 T25 T6 T27 T8 PACKING T2 T3 T5 T25 T6 T27
CLASS 1500
FULL BORE REDUCED BORE
SIZE inch 1/4 3/8 1/2 3/4 1 1.1/4 1.1/2 2 SIZE inch 1/2 3/4 1 1.1/4 1.1/2 2
mm 6 10 15 20 25 32 40 50 mm 15 20 25 32 40 50
A inch 3.54 3.54 4.33 5.00 6.10 6.69 8.26 8.26 A inch 3.54 4.33 5.00 6.10 6.69 8.26
mm 90 90 110 127 155 170 210 210 mm 90 110 127 155 170 210
B Open inch 6.29 6.29 6.88 8.26 9.60 9.84 14.5 14.7 B Open inch 6.29 6.88 8.26 9.60 9.84 14.5
mm 160 160 175 210 244 250 370 375 mm 160 175 210 244 250 370
C inch 0.28 0.35 0.51 0.67 0.83 1.10 1.30 1.48 C inch 0.35 0.51 0.67 0.83 1.10 1.30
mm 7 9 13 17 21 28 33 37.5 mm 9 13 17 21 28 33
Handwheel inch 3.14 3.14 4.33 5.11 5.11 7.08 7.08 7.08 Handwheel inch 3.14 4.33 5.11 5.11 7.08 7.08
mm 80 80 110 130 130 180 180 180 mm 80 110 130 130 180 180
WEIGHT lb 4.8 4.8 8.5 13.2 17.6 26.4 41.8 40.7 WEIGHT lb 4.8 8.5 13.2 17.6 26.4 41.8
kg 2.2 2.2 3.9 6 8 12 19 18.5 kg 2.2 3.9 6 8 12 19
FIGURE WD1515 FIGURE WD15
PACKING T3 T3 T5 T6 T6 T27 T8 T918 PACKING T3 T5 T6 T6 T27 T8
40
GLOBE VALVES
Design construction:
BS 5352
ASME B16.34
Testing according to API 598 - BS 6755
Marking MSS SP25
CLASS 2500
FULL BORE
SIZE inch 1/4 3/8 1/2 3/4 1 1.1/4 1.1/2 2
mm 6 10 15 20 25 32 40 50
A inch - - 5.00 6.10 6.69 - 9.25 9.25
mm - - 127 155 170 - 235 235
CLASS 4500
FULL BORE
SIZE inch 1/4 3/8 1/2 3/4 1 1.1/4 1.1/2 2
mm 6 10 15 20 25 32 40 50
A inch - - 6.10 6.69 8.26 - 9.25 -
mm - - 155 170 210 - 235 -
42
GLOBE VALVES
B Open inch 6.10 6.10 6.10 6.88 8.66 9.44 11.02 13.78 B Open inch 11.02 11.02 11.02 11.02 14.1 14.56 16.53 21.2
mm 155 155 155 175 220 240 280 350 mm 280 280 280 280 370 370 420 540
C inch 0.27 0.35 0.51 0.68 0.88 1.16 1.37 1.79 C inch 0.27 0.35 0.43 0.59 0.76 1.08 1.24 1.53
mm 7 9 13 17.5 22.5 29.5 35 45.5 mm 7 9 11 15 19.5 27.5 31.5 39
Handwheel inch 3.14 3.14 3.14 4.33 5.11 5.11 7.08 7.08 Handwheel inch 5.11 5.11 5.11 5.11 7.08 7.08 7.08 11.8
mm 80 80 80 110 130 130 180 180 mm 130 130 130 130 180 180 180 300
WEIGHT lb 3.3 3.3 3.3 4.4 9.2 11 19.8 28.6 WEIGHT lb 9.9 9.9 9.9 15.6 16.7 21.5 37.8 79.5
kg 1.5 1.5 1.5 2 4.2 5 9 13 kg 4.5 4.5 4.5 7.1 7.6 9.8 17.1 36
FIGURE YD88 FIGURE YD25
PACKING T4 T4 T4 T5 T25 T6 T27 T8 PACKING T2513X T2513X T2513X T2513X T8X T8X T918X T2528X
B Open inch 7.08 7.08 7.08 9.44 9.84 11.02 14.96 16.53 B Open inch 13.77 13.77 13.77 13.77 14.96 - 17.83 17.83
mm 180 180 180 240 250 280 380 420 mm 350 350 350 350 380 - 453 453
C inch 0.27 0.35 0.43 0.59 0.76 1.08 1.24 1.53 C inch 0.27 0.35 0.43 0.43 0.59 - 1.02 1.10
mm 7 9 11 15 19.5 27.5 31.5 39 mm 7 9 11 11 15 - 26 28
Handwheel inch 4.33 4.33 4.33 5.11 5.11 7.08 7.08 7.08 Handwheel inch 7.08 7.08 7.08 7.08 7.08 - 15.75 15.75
mm 110 110 110 130 130 180 180 180 mm 180 180 180 180 180 - 400 400
WEIGHT lb 4.4 4.4 4.4 9.2 11.4 20.9 23.1 29.8 WEIGHT lb 21.1 21.1 21.1 20.7 23.1 - 75.0 79.5
kg 2 2 2 4.2 5.2 9.5 10.5 13.5 kg 9.6 9.6 9.6 9.4 10.5 - 34 36
FIGURE YD1515 FIGURE YD45
PACKING T5 T5 T5 T6 T6 T27 T8 T918 PACKING T8X T8X T8X T8X T8X - T2528X T2528X
44
GLOBE VALVES SPECIAL SERVICE
Sour Service NACE STANDARD MR-01-75
MATERIAL
CLASS 800 RATINGS
BS 5352 Body/Bonnet Trim Bolting
Regular Port
Full Port on request 1975 psi @ 100°F
BOLTED
Other ratings
BONNET page 86 type
Outside Dimensions on page 34 410 HFS
Carbon Steel B7M
Screw and type 316
Yoke CLASS 1500
BS 5352 3705 psi @ 100°F
Regular Port Other ratings
page 86
Dimensions on page 34
Welded Bonnet type on request
45
GLOBE VALVES OPTIONS
NEEDLE
POINT
RENEWABLE
POSITION OR INTEGRAL
INDICATOR SEAT
LOOSE DISC
NEEDLE LOOSE “V”
POINT PORT DISC
RENEWABLE RENEWABLE
OR INTEGRAL OR INTEGRAL
SEAT SEAT
INSTRUMENTATION VALVE
Figure CLASS MATERIALS
30 3000 Carbon Steel
Forged Steel Construction Please contact CALOBRI offices for dimensional data
VERTICAL CHECK
Figure CLASS MATERIALS
UV-88 800 Carbon Steel
UV-1515 1500 Stainless Steels
THREADED BONNET Exotics and Alloys
Forged Steel Construction
Please contact CALOBRI offices for dimensional data
46
CHECK VALVES
CHECK VALVES
Check valves are uni-directional valves which automatically open with forward flow and close against reverse flow.
They are supplied to meet a wide variety of applications with the closing element in the piston, ball or swing type.
Piston check valves are normally supplied by CALOBRI with the addition of a spring which allows both the vertical and
horizontal installation.
Great care is given by CALOBRI employees in the design and in manufacturing to prevent noisy operation and unsa-
tisfactory wear of closure components.
CLASS DESIGN CONNECTION PORT STANDARD Screw & Yoke ENDS CALOBRI
800 Piston Bolted bonnet Reduced BS5352 Outside Threaded and Socket Weld Ends P8
800 Piston Bolted bonnet Full BS5352 Outside Threaded and Socket Weld Ends P88
800 Ball Bolted bonnet Reduced BS5352 Outside Threaded and Socket Weld Ends C8
800 Ball Bolted bonnet Full BS5352 Outside Threaded and Socket Weld Ends C88
800 Swing Bolted bonnet Reduced BS5352 Outside Threaded and Socket Weld Ends B8
800 Swing Bolted bonnet Full BS5352 Outside Threaded and Socket Weld Ends B88
800 Piston Welded Bonnet Reduced BS5352 Outside Threaded and Socket Weld Ends WP8
800 Piston Welded Bonnet Full BS5352 Outside Threaded and Socket Weld Ends WP88
800 Ball Welded Bonnet Reduced BS5352 Outside Threaded and Socket Weld Ends WC8
800 Ball Welded Bonnet Full BS5352 Outside Threaded and Socket Weld Ends WC88
800 Swing Welded Bonnet Reduced BS5352 Outside Threaded and Socket Weld Ends WB8
800 Swing Welded Bonnet Full BS5352 Outside Threaded and Socket Weld Ends WB88
1500 Piston Bolted bonnet Reduced BS5352 Outside Threaded and Socket Weld Ends P15
1500 Piston Bolted bonnet Full BS5352 Outside Threaded and Socket Weld Ends P1515
1500 Ball Bolted bonnet Reduced BS5352 Outside Threaded and Socket Weld Ends C15
1500 Ball Bolted bonnet Full BS5352 Outside Threaded and Socket Weld Ends C1515
1500 Swing Bolted bonnet Reduced BS5352 Outside Threaded and Socket Weld Ends B15
1500 Swing Bolted bonnet Full BS5352 Outside Threaded and Socket Weld Ends B1515
1500 Piston Welded Bonnet Reduced BS5352 Outside Threaded and Socket Weld Ends WP15
1500 Piston Welded Bonnet Full BS5352 Outside Threaded and Socket Weld Ends WP1515
1500 Ball Welded Bonnet Reduced BS5352 Outside Threaded and Socket Weld Ends WC15
1500 Ball Welded Bonnet Full BS5352 Outside Threaded and Socket Weld Ends WC1515
1500 Swing Welded Bonnet Reduced BS5352 Outside Threaded and Socket Weld Ends WB15
1500 Swing Welded Bonnet Full BS5352 Outside Threaded and Socket Weld Ends WB1515
1500 Piston Ring Joint BB Full ANSI B16.34 Outside Threaded and Socket Weld Ends RJ-P1515
1500 Ball Ring Joint BB Full ANSI B16.34 Outside Threaded and Socket Weld Ends RJ-C1515
1500 Swing Ring Joint BB Full ANSI B16.34 Outside Threaded and Socket Weld Ends RJ-B1515
2500 Piston Ring Joint BB Full ANSI B16.34 Outside Threaded and Socket Weld Ends RJ-P25
2500 Ball Ring Joint BB Full ANSI B16.34 Outside Threaded and Socket Weld Ends RJ-C25
2500 Piston Welded Bonnet Full ANSI B16.34 Outside Threaded and Socket Weld Ends WP25
2500 Ball Welded Bonnet Full ANSI B16.34 Outside Threaded and Socket Weld Ends WC25
4500 Piston Welded Bonnet Full ANSI B16.34 Outside Threaded and Socket Weld Ends WP45
4500 Ball Welded Bonnet Full ANSI B16.34 Outside Threaded and Socket Weld Ends WC45
800 Piston Y Pattern Welded Bonnet Full BS5352 Outside Threaded and Socket Weld Ends YP88
1500 Piston Y Pattern Welded Bonnet Full ANSI B16.34 Outside Threaded and Socket Weld Ends YP1515
2500 Piston Y Pattern Welded Bonnet Full ANSI B16.34 Outside Threaded and Socket Weld Ends YP25
4500 Piston Welded Bonnet Full ANSI B16.34 Outside Threaded and Socket Weld Ends YP45
48
CHECK VALVES
CLASS 800
FULL BORE REDUCED BORE
SIZE inch 1/4 3/8 1/2 3/4 1 1.1/4 1.1/2 2 SIZE inch 1/2 3/4 1 1.1/4 1.1/2 2
mm 6 10 15 20 25 32 40 50 mm 15 20 25 32 40 50
Piston - Ball inch 3.14 3.14 3.54 4.33 5.00 6.10 6.69 8.26 Piston - Ball inch 3.14 3.54 4.33 5.00 6.10 6.69
mm 80 80 90 110 127 155 170 210 mm 80 90 110 127 155 170
A A
Swing inch 3.14 3.14 3.54 4.33 5.00 5.00 5.00 8.26 Swing inch 3.14 3.54 4.33 5.00 5.00 5.00
mm 80 80 90 110 127 127 127 210 mm 80 90 110 127 127 127
B inch 2.08 2.08 2.36 2.87 3.14 3.85 4.64 5.90 B inch 2.08 2.36 2.87 3.14 3.85 4.64
mm 53 53 60 73 80 98 118 15 mm 53 60 73 80 98 118
Piston - Ball inch 0.28 0.35 0.51 0.69 0.88 1.16 1.38 1.79 Piston - Ball inch 0.35 0.51 0.69 0.88 1.16 1.38
mm 7 9 13 17.5 22.5 29.5 35 45.5 mm 9 13 17.5 22.5 29.5 35
C C
Swing inch 0.31 0.38 0.55 0.70 0.94 1.18 1.45 1.89 Swing inch 0.38 0.55 0.70 0.94 1.18 1.45
mm 8 9.6 14 18 24 30 37 48 mm 9.6 14 18 24 30 37
Piston - Ball Lb 2.8 2.8 3.0 5.2 8.8 16.2 17.6 39.6 Piston - Ball Lb 2.8 3.0 5.2 8.8 16.2 17.6
Weight
Weight
Kg 1.3 1.3 1.4 2.4 4.0 7.4 8 18 Kg 1.3 1.4 2.4 4.0 7.4 8
Swing lb 2.8 2.8 3.0 5.2 8.8 12.1 14.3 38.5 Swing lb 2.8 3.0 5.2 8.8 12.1 14.3
kg 1.3 1.3 1.4 2.4 4.0 5.5 6.5 17.5 kg 1.3 1.4 2.4 4.0 5.5 6.5
Piston P88 Piston P8
FIGURE
FIGURE
CLASS 1500
FULL BORE REDUCED BORE
SIZE inch 1/4 3/8 1/2 3/4 1 1.1/4 1.1/2 2 SIZE inch 1/2 3/4 1 1.1/4 1.1/2 2
mm 6 10 15 20 25 32 40 50 mm 15 20 25 32 40 50
Piston - Ball inch 3.54 3.54 4.33 5.00 6.10 6.69 8.26 8.26 Piston - Ball inch 3.54 4.33 5.00 6.10 6.69 8.26
mm 90 90 110 127 155 170 210 210 mm 90 110 127 155 170 210
A A
Swing inch 3.54 3.54 4.33 5.00 5.00 5.00 8.26 8.26 Swing inch 3.54 4.33 5.00 5.00 5.00 8.26
mm 90 90 110 127 127 127 210 210 mm 90 110 127 127 127 210
B inch 2.36 2.36 2.87 3.14 3.85 4.64 5.90 5.90 B inch 2.36 2.87 3.14 3.85 4.64 5.90
mm 60 60 73 80 98 118 150 150 mm 60 73 80 98 118 150
Piston - Ball inch 0.28 0.35 0.51 0.69 0.83 1.10 1.30 1.48 Piston - Ball inch 0.35 0.51 0.69 0.83 1.10 1.30
C mm 7 9 13 17.5 21 28 33 37.5 mm 9 13 17.5 21 28 33
C
Swing inch 0.31 0.38 0.55 0.70 0.94 1.18 1.45 1.57 Swing inch 0.38 0.55 0.70 0.94 1.18 1.45
mm 8 9.6 14 18 24 30 37 40 mm 9.6 14 18 24 30 37
Piston - Ball Lb 3.3 3.3 6.1 10.1 16.2 19.8 49.9 41.8 Piston - Ball Lb 3.3 6.1 10.1 16.2 19.8 49.9
Weight
Weight
Kg 1.5 1.5 2.8 4.6 7.4 9 19.5 19 Kg 1.5 2.8 4.6 7.4 9 19.5
Swing lb 3.5 3.3 5.2 8.8 13.2 20.9 41.8 18.5 Swing lb 3.3 5.2 8.8 13.2 20.9 41.8
kg 1.6 1.5 2.4 4.0 6 9.5 19 40.7 kg 1.5 2.4 4 6 9.5 19
Piston P1515 Piston P15
FIGURE
FIGURE
50
CHECK VALVES
CLASS 1500
FULL BORE
SIZE inch 1/4 3/8 1/2 3/4 1 1.1/4 1.1/2 2
mm 6 10 15 20 25 32 40 50
A inch - - 4.33 5.90 5.90 - 8.26 9.25
mm - - 110 150 150 - 210 235
Kg - - 4 7.5 9 - 18.5 30
Ball RJC1515
Swing RJB1515
RING JOINT - - RJ-13 RJ-16 RJ-17 - RJ-21 RJ-23
CLASS 2500
FULL BORE
SIZE inch 1/4 3/8 1/2 3/4 1 1.1/4 1.1/2 2
mm 6 10 15 20 25 32 40 50
A inch - - 5.90 5.90 8.26 - 9.25 9.25
mm - - 150 150 210 - 235 235
Ball RJC25
RING JOINT - - RJ-16 RJ-16 RJ-17 - RJ-21 RJ-21
52
CHECK VALVES
CLASS 800
FULL BORE REDUCED BORE
SIZE inch 1/4 3/8 1/2 3/4 1 1.1/4 1.1/2 2 SIZE inch 1/2 3/4 1 1.1/4 1.1/2 2
mm 6 10 15 20 25 32 40 50 mm 15 20 25 32 40 50
A inch 3.14 3.14 3.54 4.33 5.00 6.10 6.69 8.26 A inch 3.14 3.54 4.33 5.00 6.10 6.69
mm 80 80 90 110 127 155 170 210 mm 80 90 110 127 155 170
B inch 2.08 2.08 2.36 2.87 3.14 3.85 4.33 5.90 B inch 2.08 2.36 2.87 3.14 3.85 4.33
mm 53 53 60 73 80 98 110 150 mm 53 60 73 80 98 110
C inch 0.28 0.35 0.51 0.69 0.88 1.16 1.37 1.79 C inch 0.35 0.51 0.69 0.88 1.16 1.37
mm 7 9 13 17.5 22.5 29.5 35 45.5 mm 9 13 17.5 22.5 29.5 35
Weight Lb 2.8 2.8 3.0 5.2 8.8 16.3 17.6 37.4 Weight Lb 2.8 3.0 5.2 8.8 16.3 17.6
Kg 1.3 1.3 1.4 2.4 4.0 7.4 8 17 Kg 1.3 1.4 2.4 4.0 7.4 8
FIGURE
WP88
Ball WC88 Ball WC8
Swing WB88 WB88 WB88 WB88 WB88 WB88 WB88 WB88 Swing WB8 WB8 WB8 WB8 WB8 WB8
CLASS 1500
FULL BORE REDUCED BORE
SIZE inch 1/4 3/8 1/2 3/4 1 1.1/4 1.1/2 2 SIZE inch 1/2 3/4 1 1.1/4 1.1/2 2
mm 6 10 15 20 25 32 40 50 mm 15 20 25 32 40 50
A inch 3.54 3.54 4.33 5.00 6.10 6.69 8.26 8.26 A inch 3.54 4.33 5.00 6.10 6.69 8.26
mm 90 90 110 127 155 170 210 210 mm 90 110 127 155 170 210
B inch 2.36 2.36 2.87 3.14 3.85 4.33 5.90 5.90 B inch 2.36 2.87 3.14 3.85 4.33 5.90
mm 60 60 73 80 98 110 150 150 mm 60 13 80 98 110 150
C inch 0.28 0.35 0.51 0.67 0.83 1.10 1.30 1.47 C inch 0.35 0.51 0.67 0.83 1.10 1.30
mm 7 9 13 17 21 28 33 37.5 mm 9 13 17 21 28 33
Weight Lb 3.3 3.3 6.1 10.1 16.3 19.8 33.0 31.9 Weight Lb 3.3 6.1 10.1 16.3 19.8 33.0
Kg 1.5 1.5 2.8 4.6 7.4 9 15 14.5 Kg 1.5 2.8 4.6 7.4 9 15
WP15
FIGURE
Piston Piston
FIGURE
WP1515
Ball WC1515 Ball WC15
Swing WB1515 WB1515 WB1515 WB1515 WB1515 WB1515 WB1515 WB1515 Swing WB15 WB15 WB15 WB15 WB15 WB15
54
CHECK VALVES
CLASS 2500
FULL BORE
SIZE inch 1/4 3/8 1/2 3/4 1 1.1/4 1.1/2 2
mm 6 10 15 20 25 32 40 50
A inch - - 5.00 6.10 6.69 - 9.25 9.25
mm - - 127 155 170 - 235 235
Piston WP25
Ball WC25
Swing - - WB25 WB25 WB25 - WB25 WB25
CLASS 4500
FULL BORE
SIZE inch 1/4 3/8 1/2 3/4 1 1.1/4 1.1/2 2
mm 6 10 15 20 25 32 40 50
A inch - - 8.26 8.26 9.25 - 9.25 -
mm - - 210 210 235 - 235 -
Piston WP45
Ball WC45
Swing - - WB45 WB45 WB45 - WB45 -
56
CHECK VALVES
Ratings:
- carbon steel class 800 1975 psig @ 100° F
138 bar + 38° C
- carbon steel class 1500 3705 psig @ 100° F
255 bar + 38° C
- carbon steel class 2500 6170 psig @ 100° F
425 bar + 38° C
- carbon steel class 4500 11110 psig @ 100° F
765 bar + 38° C
B inch 2.55 2.55 2.55 2.55 3.14 3.74 4.52 5.31 B inch 4.52 4.52 4.52 4.72 5.90 5.90 6.30 6.70
mm 65 65 65 65 80 95 115 135 mm 115 115 115 120 150 150 160 170
C inch 0.27 0.35 0.51 0.68 0.88 1.16 1.37 1.79 C inch 0.27 0.35 0.43 0.59 0.76 1.08 1.24 1.53
mm 7 9 13 17.5 22.5 29.5 35 45.5 mm 7 9 11 15 19.5 27.5 31.5 39
WEIGHT lb 2.6 2.6 2.6 3.9 6.6 7.2 12.7 15.4 WEIGHT lb 7.0 7.0 7.7 7.7 13.7 12.3 22.9 30.8
kg 1.2 1.2 1.2 1.2 3 3.3 5.8 7 kg 3.2 3.2 3.5 3.5 6.2 5.6 10.4 14
FIGURE YP88 FIGURE YP25
B inch 2.75 2.75 2.75 3.93 3.93 4.72 4.72 5.51 B inch 4.72 4.72 4.72 4.72 5.70 - 6.30 6.30
mm 70 70 70 100 100 120 120 140 mm 120 120 120 120 145 - 160 160
C inch 0.27 0.35 0.43 0.59 0.76 1.08 1.24 1.53 C inch 0.27 0.35 0.43 0.43 0.59 - 1.02 1.10
mm 7 9 11 15 19.5 27.5 31.5 39 mm 7 9 11 11 15 - 26 28
WEIGHT lb 3.3 3.3 3.3 7.0 7.0 13.2 13.6 20.9 WEIGHT lb 19.1 19.1 19.1 17.6 16.7 - 36.3 35.2
kg 1.5 1.5 1.5 3.2 3.2 6 6.2 9.5 kg 8.7 8.7 8.7 8.0 7.6 - 16.5 16
FIGURE YP1515 FIGURE YP45
58
INTEGRALLY FLANGED VALVES
57
INTEGRALLY FLANGED VALVES
CLASS DESIGN CONNECTION PORT STANDARD Screw & Yoke ENDS CALOBRI
150 Gate Bolted Bonnet Reduced BS5352 Outside Flanged to ASME B16.5 S1F
150 Gate Bolted Bonnet Full BS5352 Outside Flanged to ASME B16.5 S11F
300 Gate Bolted Bonnet Reduced BS5352 Outside Flanged to ASME B16.5 S3F
300 Gate Bolted Bonnet Full BS5352 Outside Flanged to ASME B16.5 S33F
600 Gate Bolted Bonnet Reduced BS5352 Outside Flanged to ASME B16.5 S6F
600 Gate Bolted Bonnet Full BS5352 Outside Flanged to ASME B16.5 S66F
150 Globe Bolted Bonnet Reduced BS5352 Outside Flanged to ASME B16.5 D1F
150 Globe Bolted Bonnet Full BS5352 Outside Flanged to ASME B16.5 D11F
300 Globe Bolted Bonnet Reduced BS5352 Outside Flanged to ASME B16.5 D3F
300 Globe Bolted Bonnet Full BS5352 Outside Flanged to ASME B16.5 D33F
600 Globe Bolted Bonnet Reduced BS5352 Outside Flanged to ASME B16.5 D6F
600 Globe Bolted Bonnet Full BS5352 Outside Flanged to ASME B16.5 D66F
150 Piston Bolted Bonnet Reduced BS5352 Flanged to ASME B16.5 P1F
150 Ball Bolted Bonnet Reduced BS5352 Flanged to ASME B16.5 C1F
150 Swing Bolted Bonnet Reduced BS5352 Flanged to ASME B16.5 B1F
300 Piston Bolted Bonnet Reduced BS5352 Flanged to ASME B16.5 P3F
300 Ball Bolted Bonnet Reduced BS5352 Flanged to ASME B16.5 C3F
300 Swing Bolted Bonnet Reduced BS5352 Flanged to ASME B16.5 B3F
600 Piston Bolted Bonnet Reduced BS5352 Flanged to ASME B16.5 P6F
600 Ball Bolted Bonnet Reduced BS5352 Flanged to ASME B16.5 C6F
600 Swing Bolted Bonnet Reduced BS5352 Flanged to ASME B16.5 B6F
1500 Gate Ring Joint BB Full BS5352 Outside Flanged to ASME B16.5 RJ S1515F
2500 Gate Ring Joint BB Full BS5352 Outside Flanged to ASME B16.5 RJ S25F
1500 Globe Ring Joint BB Full BS5352 Outside Flanged to ASME B16.5 RJ D1515F
2500 Globe Ring Joint BB Full BS5352 Outside Flanged to ASME B16.5 RJ D25F
1500 Piston Ring Joint BB Full BS5352 Flanged to ASME B16.5 RJ P1515F
1500 Ball Ring Joint BB Full BS5352 Flanged to ASME B16.5 RJ C1515F
1500 Swing Ring Joint BB Full BS5352 Flanged to ASME B16.5 RJ B1515F
2500 Piston Ring Joint BB Full BS5352 Flanged to ASME B16.5 RJ P25F
2500 Ball Ring Joint BB Full BS5352 Flanged to ASME B16.5 RJ C25F
60
INTEGRALLY FLANGED VALVES
B Open inch - - 6.69 7.67 8.26 - 10.3 12.8 B Open inch - - 6.69 7.67 7.99 - 9.56 10.3
mm - - 170 195 210 - 262 327 mm - - 170 195 203 - 243 262
C inch - - 0.55 0.70 0.94 - 1.45 1.89 C inch - - 0.38 0.55 0.70 - 1.18 1.45
mm - - 14 18 24 - 37 48 mm - - 9.6 14 18 - 30 37
Handwheel inch - - 4.33 4.33 5.11 - 9.84 9.84 Handwheel inch - - 3.14 3.14 4.33 - 5.11 5.11
mm - - 110 110 130 - 250 250 mm - - 80 80 110 - 130 130
WEIGHT lb - - 7.9 10.5 14.3 - 26.4 39.6 WEIGHT lb - - 7.5 8.3 12.5 - 21.4 29.1
kg - - 3.6 4.8 6.5 - 12 18 kg - - 3.4 3.8 5.7 - 9.7 13.2
FIGURE S11F FIGURE S1F
PACKING - - T2 T4 T5 - T6 2”#150 PACKING - - T2 T2 T4 - T6 T6
GASKET - - 40x30 40x30 48x38 - 66x54 81x71 GASKET - - 40x30 40x30 48x38 - 66x54 74x60
CLASS 300
FULL BORE REDUCED BORE
SIZE inch 1/4 3/8 1/2 3/4 1 1.1/4 1.1/2 2 SIZE inch 1/4 3/8 1/2 3/4 1 1.1/4 1.1/2 2
mm 6 10 15 20 25 32 40 50 mm 6 10 15 20 25 32 40 50
A inch - - 5.51 6.02 6.49 - 7.51 8.50 A inch - - 5.51 6.02 6.49 - 7.51 8.50
mm - - 140 153 165 - 191 216 mm - - 140 153 165 - 191 215
B Open inch - - 6.69 7.67 8.26 - 10.3 12.8 B Open inch - - 6.69 7.67 7.99 - 9.56 10.3
mm - - 170 195 210 - 262 327 mm - - 170 195 203 - 243 262
C inch - - 0.55 0.70 0.94 - 1.45 1.89 C inch - - 0.38 0.55 0.70 - 1.18 1.45
mm - - 14 18 24 - 37 48 mm - - 9.6 14 18 - 30 37
Handwheel inch - - 4.33 4.33 5.11 - 9.84 9.84 Handwheel inch - - 3.14 3.14 4.33 - 5.11 5.11
mm - - 110 110 130 - 250 250 mm - - 80 80 110 - 130 130
WEIGHT lb - - 9.0 12.1 15.4 - 28.6 41.8 WEIGHT lb - - 8.6 11.0 13.6 - 26.4 36.3
kg - - 4.1 5.5 7.0 - 13 19 kg - - 3.9 5 6.2 - 12 16.5
FIGURE S33F FIGURE S3F
PACKING - - T2 T3 T5 - T6 2”#150 PACKING - - T2 T2 T4 - T6 T6
GASKET - - 40x30 40x30 48x38 - 66x54 79x69 GASKET - - 40x30 40x30 48x38 - 66x54 74x60
CLASS 600
FULL BORE REDUCED BORE
SIZE inch 1/4 3/8 1/2 3/4 1 1.1/4 1.1/2 2 SIZE inch 1/4 3/8 1/2 3/4 1 1.1/4 1.1/2 2
mm 6 10 15 20 25 32 40 50 mm 6 10 15 20 25 32 40 50
A inch - - 6.49 7.51 8.50 - 9.48 11.5 A inch - - 6.49 7.51 8.50 - 9.48 11.5
mm - - 165 191 216 - 241 292 mm - - 165 191 216 - 241 292
B Open inch - - 9.60 10.5 12.2 - 15.4 16.9 B Open inch - - 5.82 6.41 7.00 - 9.56 10.3
mm - - 244 268 310 - 391 430 mm - - 148 163 178 - 243 262
C inch - - 0.55 0.70 0.94 - 1.45 1.89 C inch - - 0.38 0.55 0.70 - 1.18 1.45
mm - - 14 18 24 - 37 48 mm - - 9.6 14 18 - 30 37
Handwheel inch - - 4.33 4.33 5.11 - 9.84 9.84 Handwheel inch - - 3.14 3.14 4.33 - 5.11 5.11
mm - - 110 110 130 - 250 250 mm - - 80 80 110 - 130 130
WEIGHT lb - - 13.2 24.2 28.6 - 59.4 66.0 WEIGHT lb - - 8.8 11.4 16.5 - 33.0 45.1
kg - - 6 11 13 - 27 30 kg - - 4 5.2 7.5 - 15 20.5
FIGURE S66F FIGURE S6F
PACKING - - T2 T3 T5 - T6 2”#150 PACKING - - T2 T2 T4 - T6 T6
GASKET - - 40x30 40x30 48x38 - 66x54 79x69 GASKET - - 40x30 40x30 48x38 - 66x54 74x60
62
INTEGRALLY FLANGED VALVES
B Open inch - - 6.69 7.75 8.07 - 9.76 10.1 B Open inch - - 6.10 6.88 8.66 - 11.0 13.78
mm - - 170 197 205 - 248 257 mm - - 155 175 220 - 280 350
C inch - - 0.51 0.68 0.88 - 1.37 1.79 C inch - - 0.35 0.51 0.69 - 1.16 1.37
mm - - 13 17.5 22.5 - 35 45.5 mm - - 9 13 17.5 - 29.5 35
Handwheel inch - - 3.14 3.14 4.33 - 5.11 7.08 Handwheel inch - - 3.14 3.14 5.11 - 7.08 7.08
mm - - 80 80 110 - 130 180 mm - - 80 80 130 - 180 180
WEIGHT lb - - 7.5 8.8 12.5 - 22.0 37.4 WEIGHT lb - - 7.04 8.8 15.8 - 32.8 41.8
kg - - 3.4 4 5.7 - 10 17.0 kg - - 3.2 4 7.2 - 14.9 19
FIGURE D11F FIGURE D1F
PACKING - - T2 T3 T5 - T6 T27 PACKING - - T2 T3 T5 - T6 T27
GASKET - - 40x30 40x30 48x38 - 66x54 74x60 GASKET - - 40x30 40x30 48x38 - 66x54 74x60
CLASS 300
FULL BORE REDUCED BORE
SIZE inch 1/4 3/8 1/2 3/4 1 1.1/4 1.1/2 2 SIZE inch 1/4 3/8 1/2 3/4 1 1.1/4 1.1/2 2
mm 6 10 15 20 25 32 40 50 mm 6 10 15 20 25 32 40 50
A inch - - 6.02 7.00 7.99 - 9.01 10.5 A inch - - 6.02 7.00 7.99 - 9.01 10.5
mm - - 153 178 203 - 229 267 mm - - 153 178 203 - 229 267
B Open inch - - 5.82 6.49 7.08 - 9.76 10.1 B Open inch - - 6.10 6.88 8.66 - 11.0 13.78
mm - - 148 165 180 - 248 257 mm - - 155 175 220 - 280 350
C inch - - 0.51 0.68 0.88 - 1.37 1.79 C inch - - 0.35 0.51 0.69 - 1.16 1.37
mm - - 13 17.5 22.5 - 35 45.5 mm - - 9 13 17.5 - 29.5 35
Handwheel inch - - 3.14 3.14 4.33 - 5.11 7.08 Handwheel inch - - 3.14 3.14 5.11 - 7.08 7.08
mm - - 80 80 110 - 130 180 mm - - 80 80 130 - 180 180
WEIGHT lb - - 8.8 11.0 16.1 - 30.8 45.1 WEIGHT lb - - 9.25 12.5 23.5 - 36.1 46.2
kg - - 4 5 7.3 - 14 20.5 kg - - 4.2 5.7 10.7 - 16.4 21
FIGURE D33F FIGURE D3F
PACKING - - T2 T3 T5 - T6 T27 PACKING - - T2 T3 T5 - T6 T27
GASKET - - 40x30 40x30 48x38 - 66x54 74x60 GASKET - - 40x30 40x30 48x38 - 66x54 74x60
CLASS 600
FULL BORE REDUCED BORE
SIZE inch 1/4 3/8 1/2 3/4 1 1.1/4 1.1/2 2 SIZE inch 1/4 3/8 1/2 3/4 1 1.1/4 1.1/2 2
mm 6 10 15 20 25 32 40 50 mm 6 10 15 20 25 32 40 50
A inch - - 6.49 7.51 8.50 - 9.48 11.5 A inch - - 6.49 7.51 8.50 - 9.48 11.5
mm - - 165 191 216 - 241 292 mm - - 165 191 216 - 241 292
B Open inch - - 5.82 6.49 7.08 - 9.76 10.1 B Open inch - - 6.10 6.88 8.66 - 11.0 13.78
mm - - 148 165 180 - 248 257 mm - - 155 175 220 - 280 350
C inch - - 0.51 0.68 0.88 - 1.37 1.79 C inch - - 0.35 0.51 0.69 - 1.16 1.37
mm - - 13 17.5 22.5 - 35 45.5 mm - - 9 13 17.5 - 29.5 35
Handwheel inch - - 3.14 3.14 4.33 - 5.11 7.08 Handwheel inch - - 3.14 3.14 5.11 - 7.08 7.08
mm - - 80 80 110 - 130 180 mm - - 80 80 130 - 180 180
WEIGHT lb - - 9.9 12.1 16.7 - 33.0 46.2 WEIGHT lb - - 10.3 13.2 25.7 - 38.3 50.6
kg - - 4.5 5.5 7.6 - 15 21 kg - - 4.7 6 11.7 - 17.4 23
FIGURE D66F FIGURE D6F
PACKING - - T2 T3 T5 - T6 T27 PACKING - - T2 T3 T5 - T6 T27
GASKET - - 40x30 40x30 48x38 - 66x54 74x60 GASKET - - 40x30 40x30 48x38 - 66x54 74x60
63
INTEGRALLY FLANGED VALVES
CLASS 150
B
mm - - 75 92 98 - 98 110
Weight
Kg - - 2.9 3.2 4.3 - 6.5 14.5
Kg - - 3.6 4.2 6 - 12 16
Ball C3F
Swing B3F
GASKET - - 40x30 40x30 48x38 - 66x54 74x60
B
mm - - 53 60 73 - 98 110
64
INTEGRALLY FLANGED VALVES
Design construction:
BS 5352
ASME B16.34
Testing according to API 598 - BS 6755
Marking MSS SP25
B Open inch - - 10.2 11.8 11.8 - 15.3 16.5 B Open inch - - 10.2 11.8 11.8 - 15.3 16.5
mm - - 260 300 300 - 390 420 mm - - 260 300 300 - 390 420
C inch - - 0.55 0.70 0.94 - 1.45 1.89 C inch - - 0.51 0.67 0.83 - 1.30 1.48
mm - - 14 18 24 - 37 48 mm - - 13 17 21 - 33 37.5
Handwheel inch - - 4.33 5.11 5.11 - 9.84 11.8 Handwheel inch - - 4.33 5.11 5.11 - 9.84 11.8
mm - - 110 130 130 - 250 300 mm - - 110 130 130 - 250 300
WEIGHT lb - - 24.2 35.2 41.8 - 77.1 130.0 WEIGHT lb - - 24.2 35.2 42.9 - 74.8 134.3
kg - - 11 16 19 - 35 59 kg - - 11 16 19.5 - 34 61
FIGURE RJ S1515F FIGURE RJ D1515F
PACKING - - T5 T6 T6 - T8 T918 PACKING - - T5 T6 T6 - T8 T918
GASKET - - RJ-13 RJ-16 RJ-17 - RJ-21 RJ-24 GASKET - - RJ-13 RJ-16 RJ-17 - RJ-21 RJ-23
B Open inch - - 11.9 12.4 14.5 - 17.5 22.2 B Open inch - - 13.0 13.0 14.5 - 17.1 22.4
mm - - 304 315 368 - 445 538 mm - - 332 332 370 - 435 570
C inch - - 0.55 0.70 0.94 - 1.45 1.45 C inch - - 0.43 0.67 0.83 - 1.30 1.48
mm - - 14 18 24 - 37 37 mm - - 11 17 21 - 33 37.5
Handwheel inch - - 5.11 5.11 9.84 - 11.8 11.8 Handwheel inch - - 5.11 5.11 9.84 - 11.8 11.8
mm - - 130 130 250 - 300 300 mm - - 130 130 250 - 300 300
WEIGHT lb - - 41.8 46.2 88.1 - 136.5 202.6 WEIGHT lb - - 9.9 15.6 16.7 - 37.8 79.5
kg - - 19 21 40 - 62 92 kg - - 4.5 7.1 7.6 - 17.1 36
FIGURE RJ S25F FIGURE RJ D25F
PACKING - - T25X T6X T8X - T2528X T2528X PACKING - - T6X T6X T8X - T2528X T2528X
GASKET - - RJ-13 RJ-16 RJ-17 - RJ-21 RJ-23 GASKET - - RJ-16 RJ-16 RJ-17 - RJ-21 RJ-23
65
INTEGRALLY FLANGED VALVES
CHECK VALVES
CLASS 1500
BOLTED BONNET - Threaded and Socket Weld Ends
SIZE inch 1/4 3/8 1/2 3/4 1 1.1/4 1.1/2 2
mm 6 10 15 20 25 32 40 50
A inch - - 8.50 9.01 10.0 - 12.0 14.5
mm - - 216 229 254 - 305 368
Kg - - 8 14 17 - 28 37
Ball RJ C1515F
Swing RJ B1515F
GASKET - - RJ-13 RJ-16 RJ-17 - RJ-21 RJ-23
CLASS 2500
BOLTED BONNET - Threaded and Socket Weld Ends
SIZE inch 1/4 3/8 1/2 3/4 1 1.1/4 1.1/2 2
mm 6 10 15 20 25 32 40 50
A inch - - 10.4 10.7 12.1 - 15.1 17.7
mm - - 264 273 308 - 384 451
Piston
Ball RJ C25F
GASKET - - RJ-16 RJ-16 RJ-17 - RJ-21 RJ-21
66
CRYOGENIC VALVES
CRYOGENIC VALVES
Cryogenic Service' refers to service where temperature are below normal atmosfheric temperatures. Definitions vary,
but often any temperature below -50°F/ -45°C is considered cryogenic. The bonnet of gate and globe valves is of the
extended type with sufficient lenght and a vapour space between body and stuffing box in order to maintain the gland
packing sufficiebtly near ambient temperature to prevent icing of the top works and keep the packing soft and pliable
for optimum sealing characteristics.
CLASS DESIGN CONNECTION PORT STANDARD Screw & Yoke ENDS CALOBRI
150 Gate Bolted bonnet-Welded Bon Reduced BS5352 Outside Flanged to ASME B16.5 BT S1F
150 Gate Bolted bonnet-Welded Bon Full BS5352 Outside Flanged to ASME B16.5 BT S11F
300 Gate Bolted bonnet-Welded Bon Reduced BS5352 Outside Flanged to ASME B16.5 BT S3F
300 Gate Bolted bonnet-Welded Bon Full BS5352 Outside Flanged to ASME B16.5 BT S33F
600 Gate Bolted bonnet-Welded Bon Reduced BS5352 Outside Flanged to ASME B16.5 BT S6F
600 Gate Bolted bonnet-Welded Bon Full BS5352 Outside Flanged to ASME B16.5 BT S66F
800 Gate Bolted bonnet-Welded Bon Reduced BS5352 Outside Threaded and Socket Weld Ends BT S8
800 Gate Ring Joint BB-Welded Bon Full BS5352 Outside Threaded and Socket Weld Ends BT S88
1500 Gate Bolted bonnet-Welded Bon Reduced BS5352 Outside Threaded and Socket Weld Ends BT S15
1500 Gate Ring Joint BB-Welded Bon Full BS5352 Outside Threaded and Socket Weld Ends BT S1515
150 Globe Bolted bonnet-Welded Bon Reduced BS5352 Outside Flanged to ASME B16.5 BT D1F
150 Globe Bolted bonnet-Welded Bon Full BS5352 Outside Flanged to ASME B16.5 BT D11F
300 Globe Bolted bonnet-Welded Bon Reduced BS5352 Outside Flanged to ASME B16.5 BT D3F
300 Globe Bolted bonnet-Welded Bon Full BS5352 Outside Flanged to ASME B16.5 BT D33F
600 Globe Bolted bonnet-Welded Bon Reduced BS5352 Outside Flanged to ASME B16.5 BT D6F
600 Globe Bolted bonnet-Welded Bon Full BS5352 Outside Flanged to ASME B16.5 BT D66F
800 Globe Bolted bonnet-Welded Bon Reduced BS5352 Outside Threaded and Socket Weld Ends BT D8
800 Globe Ring Joint BB-Welded Bon Full BS5352 Outside Threaded and Socket Weld Ends BT D88
1500 Globe Ring Joint BB-Welded Bon Reduced BS5352 Outside Threaded and Socket Weld Ends BT D15
1500 Globe Ring Joint BB-Welded Bon Full BS5352 Outside Threaded and Socket Weld Ends BT D1515
1500 Gate Ring Joint BB-Welded Bon Full BS5352 Outside Flanged to ASME B16.5 BT RJ S1515F
1500 Globe Ring Joint BB-Welded Bon Full BS5352 Outside Flanged to ASME B16.5 BT RJ D1515F
68
CRYOGENIC VALVES
B Open inch - - 17.2 18.5 19.8 - 21.9 23.5 B Open inch - - 16.5 17.5 17.8 - 19.4 20.1
mm - - 438 472 505 - 558 597 mm - - 420 445 453 - 493 512
C inch - - 0.55 0.75 0.94 - 1.45 1.89 C inch - - 0.39 0.55 0.75 - 1.18 1.45
mm - - 14 19 24 - 37 48 mm - - 10 14 19 - 30 37
Handwheel inch - - 4.33 4.33 5.11 - 9.84 9.84 Handwheel inch - - 3.54 3.54 4.33 - 5.11 7.08
mm - - 110 110 130 - 250 250 mm - - 90 90 110 - 130 180
WEIGHT lb - - 17.8 31.5 38.5 - 83.2 88.7 WEIGHT lb - - 10.5 12.3 18.7 - 33.0 44.7
kg - - 8.1 14.3 17.5 - 37.8 40.3 kg - - 4.8 5.6 8.5 - 15 20.3
FIGURE BT S11F FIGURE BT S1F
PACKING - - T2 T2 T4 - T6 T6 PACKING - - T2 T4 T5 - T6 T8
GASKET - - 40x30 40x30 48x38 - 66x54 74x60 GASKET - - 40x30 40x30 48x38 - 66x54 81x71
CLASS 300
FULL BORE REDUCED BORE
SIZE inch 1/4 3/8 1/2 3/4 1 1.1/4 1.1/2 2 SIZE inch 1/4 3/8 1/2 3/4 1 1.1/4 1.1/2 2
mm 6 10 15 20 25 32 40 50 mm 6 10 15 20 25 32 40 50
A inch - - 5.51 6.02 6.49 - 7.51 8.50 A inch - - 5.51 6.02 6.49 - 7.51 8.50
mm - - 140 153 165 - 191 216 mm - - 140 153 165 - 191 216
B Open inch - - 17.2 18.5 19.8 - 21.9 23.5 B Open inch - - 16.5 17.5 17.8 - 19.4 20.1
mm - - 438 472 505 - 558 597 mm - - 420 445 453 - 493 512
C inch - - 0.55 0.75 0.94 - 1.45 1.89 C inch - - 0.39 0.55 0.75 - 1.18 1.45
mm - - 14 19 24 - 37 48 mm - - 10 14 19 - 30 37
Handwheel inch - - 4.33 4.33 5.11 - 9.84 9.84 Handwheel inch - - 3.54 3.54 4.33 - 5.11 7.08
mm - - 110 110 130 - 250 250 mm - - 90 90 110 - 130 180
WEIGHT lb - - 18.2 31.9 39.4 - 83.7 89.2 WEIGHT lb - - 12.1 15.4 20.5 - 36.3 49.1
kg - - 8.3 14.5 17.9 - 38 40.5 kg - - 5.5 7 9.3 - 16.5 22.3
FIGURE BT S33F FIGURE BT S3F
PACKING - - T2 T2 T4 - T6 T6 PACKING - - T2 T3 T5 - T6 T8
GASKET - - 40x30 40x30 48x38 - 66x54 74x60 GASKET - - 40x30 40x30 48x38 - 66x54 81x71
CLASS 600
FULL BORE REDUCED BORE
SIZE inch 1/4 3/8 1/2 3/4 1 1.1/4 1.1/2 2 SIZE inch 1/4 3/8 1/2 3/4 1 1.1/4 1.1/2 2
mm 6 10 15 20 25 32 40 50 mm 6 10 15 20 25 32 40 50
A inch - - 6.49 7.51 8.50 - 9.48 11.5 A inch - - 6.49 7.51 8.50 - 9.48 11.5
mm - - 165 191 216 - 241 292 mm - - 165 191 216 - 241 292
B Open inch - - 17.2 18.5 19.8 - 21.9 23.5 B Open inch - - 15.7 16.2 16.8 - 19.4 20.1
mm - - 438 472 505 - 558 597 mm - - 398 413 428 - 493 512
C inch - - 0.55 0.75 0.94 - 1.45 1.89 C inch - - 0.39 0.55 0.75 - 1.18 1.45
mm - - 14 19 24 - 37 48 mm - - 10 14 19 - 30 37
Handwheel inch - - 4.33 4.33 5.11 - 9.84 9.84 Handwheel inch - - 3.54 3.54 4.33 - 5.11 7.08
mm - - 110 110 130 - 250 250 mm - - 90 90 110 - 130 180
WEIGHT lb - - 19.3 33.0 40.7 - 85.9 92.5 WEIGHT lb - - 12.5 15.4 21.6 - 42.9 54.6
kg - - 8.8 15 18.5 - 39 42 kg - - 5.7 7 9.8 - 19.5 24.8
FIGURE BT S66F FIGURE BT S6F
PACKING - - T2 T2 T4 - T6 2”#150 PACKING - - T2 T3 T5 - T6 2”#150
GASKET - - 40x30 40x30 48x38 - 66x54 74x60 GASKET - - 40x30 40x30 48x38 - 66x54 79x69
70
CRYOGENIC VALVES
Design construction:
API 602 - BS 5352
Testing according to API 598 - BS 6755
Marking MSS SP25
Ratings:
- carbon steel class 800 1975 psig @ 100° F
138 bar + 38° C
- carbon steel class 1500 3705 psig @ 100° F
255 bar + 38° C
GATE VALVES
CLASS 800
FULL BORE REDUCED BORE
SIZE inch 1/4 3/8 1/2 3/4 1 1.1/4 1.1/2 2 SIZE inch 1/2 3/4 1 1.1/4 1.1/2 2
mm 6 10 15 20 25 32 40 50 mm 15 20 25 32 40 50
A inch 3.14 3.14 3.54 4.33 5.00 5.00 5.00 5.90 A inch 3.14 3.54 4.33 5.00 5.00 5.00
mm 80 80 90 110 127 127 127 150 mm 80 90 110 127 127 127
B Open inch 15.7 15.7 16.2 16.8 18.1 19.4 20.1 22.7 B Open inch 15.7 16.2 16.8 18.1 19.4 20.1
mm 398 398 413 428 460 493 512 577 mm 398 413 428 460 493 512
C inch 0.31 0.39 0.55 0.75 0.94 1.18 1.45 1.89 C inch 0.39 0.55 0.75 0.94 1.18 1.45
mm 8 10 14 19 24 30 37 48 mm 10 14 19 24 30 37
inch 3.54 3.54 4.33 4.33 5.11 5.11
Handwheel inch 3.54 3.54 3.54 4.33 4.33 5.11 5.11 7.08 Handwheel
mm 90 90 90 110 110 130 130 180 mm 90 90 110 110 130 130
WEIGHT lb 7.0 7.0 9.0 14.0 23.1 26.4 32.6 64.0 WEIGHT lb 7.0 9.0 14.0 23.1 26.4 32.6
kg 3.2 3.2 4.1 6.4 10.5 12 14.8 29 kg 3.2 4.1 6.4 10.5 12 14.8
FIGURE BT S88 FIGURE BT S8
PACKING T2 T2 T2 T4 T5 T6 T6 T8 PACKING T2 T2 T4 T5 T6 T6
GASKET 40x30 40x30 40x30 48x38 54x44 66x54 74x60 95x78 GASKET 40x30 40x30 48x38 54x44 66x54 74x60
CLASS 1500
FULL BORE REDUCED BORE
SIZE inch 1/4 3/8 1/2 3/4 1 1.1/4 1.1/2 2 SIZE inch 1/2 3/4 1 1.1/4 1.1/2 2
mm 6 10 15 20 25 32 40 50 mm 15 20 25 32 40 50
A inch 3.54 3.54 4.33 5.00 5.00 5.00 5.90 5.90 A inch 3.54 4.33 5.00 5.00 5.00 5.90
mm 90 90 110 127 127 120 150 150 mm 90 110 127 127 120 150
B Open inch 15.6 15.6 16.9 18.3 19.1 20.2 22.2 22.4 B Open inch 15.6 16.9 18.3 19.1 20.2 22.2
mm 396 396 430 465 485 514 565 570 mm 396 430 465 485 514 565
C inch 0.31 0.39 0.55 0.75 0.94 1.18 1.45 1.57 C inch 0.39 0.55 0.75 0.94 1.18 1.45
mm 8 10 14 19 24 30 37 40 mm 10 14 19 24 30 37
Handwheel inch 3.54 3.54 4.33 4.33 5.11 5.11 7.08 7.08 Handwheel inch 3.54 4.33 4.33 5.11 5.11 7.08
mm 90 90 110 110 130 130 180 180 mm 90 110 110 130 130 180
WEIGHT lb 9.0 9.0 14.7 24.2 27.1 34.8 66.0 64.9 WEIGHT lb 9.0 14.7 24.2 27.1 34.8 66.0
kg 4.1 4.1 6.7 11 12.3 15.8 30 29.5 kg 4.1 6.7 11 12.3 15.8 30
FIGURE BT S1515 FIGURE BT S15
PACKING T4 T4 T5 T25 T6 T27 T8 T918 PACKING T4 T5 T25 T6 T27 T8
GASKET 40x30 40x30 40x30 48x38 54x44 66x54 74x60 74x60 GASKET 40x30 40x30 48x38 54x44 66x54 74x60
71
CRYOGENIC VALVES
B Open inch - - 19.4 20.6 21.4 - 25.9 27.1 B Open inch - - 16.5 17.6 17.9 - 19.6 19.9
mm - - 495 523 545 - 660 690 mm - - 420 447 455 - 498 507
C inch - - 0.51 0.69 0.89 - 1.37 1.79 C inch - - 0.35 0.51 0.69 - 1.16 1.37
mm - - 13 17.5 22.5 - 35 45.5 mm - - 9 13 17.5 - 29.5 35
Handwheel inch - - 3.54 4.33 5.11 - 9.84 9.84 Handwheel inch - - 3.54 3.54 4.33 - 5.11 7.08
mm - - 90 110 130 - 250 250 mm - - 90 90 110 - 130 180
WEIGHT lb - - 17.8 31.5 38.5 - 83.2 89.2 WEIGHT lb - - 11 12.7 18.9 - 30.4 53.5
kg - - 8.1 14.3 17.5 - 37.8 40.5 kg - - 5 5.8 8.6 - 13.8 24.3
FIGURE BT D11F FIGURE BT D1F
PACKING - - T2 T3 T5 - T6 T27 PACKING - - T2 T3 T5 - T6 T27
GASKET - - 40x30 40x30 48x38 - 66x54 74x60 GASKET - - 40x30 40x30 48x38 - 66x54 74x60
CLASS 300
FULL BORE REDUCED BORE
SIZE inch 1/4 3/8 1/2 3/4 1 1.1/4 1.1/2 2 SIZE inch 1/4 3/8 1/2 3/4 1 1.1/4 1.1/2 2
mm 6 10 15 20 25 32 40 50 mm 6 10 15 20 25 32 40 50
A inch - - 6.02 7.00 7.99 - 9.01 10.5 A inch - - 6.02 7.00 7.99 - 9.01 10.5
mm - - 153 178 203 - 229 267 mm - - 153 178 203 - 229 267
B Open inch - - 19.4 20.6 21.4 - 25.9 27.1 B Open inch - - 15.7 16.3 16.9 - 19.6 19.9
mm - - 495 523 545 - 660 690 mm - - 398 415 430 - 498 507
C inch - - 0.51 0.69 0.89 - 1.37 1.79 C inch - - 0.35 0.51 0.69 - 1.16 1.37
mm - - 13 17.5 22.5 - 35 45.5 mm - - 9 13 17.5 - 29.5 35
Handwheel inch - - 3.54 4.33 5.11 - 9.84 9.84 Handwheel inch - - 3.54 3.54 4.33 - 5.11 7.08
mm - - 90 110 130 - 250 250 mm - - 90 90 110 - 130 180
WEIGHT lb - - 18.9 32.6 40.3 - 84.8 90.3 WEIGHT lb - - 12.7 14.9 22.6 - 42.5 56.8
kg - - 8.6 14.8 18.3 - 38.5 41 kg - - 5.8 6.8 10.3 - 19.3 25.8
FIGURE BT D33F FIGURE BT D3F
PACKING - - T2 T3 T5 - T6 T27 PACKING - - T2 T3 T5 - T6 T27
GASKET - - 40x30 40x30 48x38 - 66x54 74x60 GASKET - - 40x30 40x30 48x38 - 66x54 74x60
CLASS 600
FULL BORE REDUCED BORE
SIZE inch 1/4 3/8 1/2 3/4 1 1.1/4 1.1/2 2 SIZE inch 1/4 3/8 1/2 3/4 1 1.1/4 1.1/2 2
mm 6 10 15 20 25 32 40 50 mm 6 10 15 20 25 32 40 50
A inch - - 6.49 7.51 8.50 - 9.48 11.5 A inch - - 6.49 7.51 8.50 - 9.48 11.5
mm - - 165 191 216 - 241 292 mm - - 165 191 216 - 241 292
B Open inch - - 19.4 20.6 21.4 - 25.9 27.1 B Open inch - - 15.7 16.3 16.9 - 19.6 19.9
mm - - 495 523 545 - 660 690 mm - - 398 415 430 - 498 507
C inch - - 0.51 0.69 0.89 - 1.37 1.79 C inch - - 0.35 0.51 0.69 - 1.16 1.37
mm - - 13 17.5 22.5 - 35 45.5 mm - - 9 13 17.5 - 29.5 35
Handwheel inch - - 3.54 4.33 5.11 - 9.84 9.84 Handwheel inch - - 3.54 3.54 4.33 - 5.11 7.08
mm - - 90 110 130 - 250 250 mm - - 90 90 110 - 130 180
WEIGHT lb - - 19.3 33.0 40.7 - 85.9 92.5 WEIGHT lb - - 13.8 16 23.3 - 44.7 59
kg - - 8.8 15 18.5 - 39 42 kg - - 6.3 7.3 10.6 - 20.3 26.8
FIGURE BT D66F FIGURE BT D6F
PACKING - - T2 T3 T5 - T6 T27 PACKING - - T2 T3 T5 - T6 T27
GASKET - - 40x30 40x30 48x38 - 66x54 74x60 GASKET - - 40x30 40x30 48x38 - 66x54 74x60
72
CRYOGENIC VALVES
Design construction:
BS 5352
Testing according to API 598 - BS 6755
Marking MSS SP25
Ratings:
- carbon steel class 800 1975 psig @ 100° F
138 bar + 38° C
- carbon steel class 1500 3705 psig @ 100° F
255 bar + 38° C
GLOBE VALVES
CLASS 800
FULL BORE REDUCED BORE
SIZE inch 1/4 3/8 1/2 3/4 1 1.1/4 1.1/2 2 SIZE inch 1/2 3/4 1 1.1/4 1.1/2 2
mm 6 10 15 20 25 32 40 50 mm 15 20 25 32 40 50
A inch 3.14 3.14 3.54 4.33 5.00 6.10 6.69 8.26 A inch 3.14 3.54 4.33 5.00 6.10 6.69
mm 80 80 90 110 127 155 170 210 mm 80 90 110 127 155 170
B Open inch 15.7 15.7 16.3 16.9 18.2 19.6 20.0 22.3 B Open inch 15.7 16.3 16.9 18.2 19.6 20.0
mm 398 398 415 430 463 498 507 567 mm 398 415 430 463 498 507
C inch 0.28 0.35 0.51 0.69 0.89 1.16 1.37 1.79 C inch 0.35 0.51 0.69 0.89 1.16 1.37
mm 7 9 13 17.5 22.5 29.5 35 45.5 mm 9 13 17.5 22.5 29.5 35
Handwheel inch 2.75 3.54 3.54 4.33 5.11 5.11 7.08 7.08 Handwheel inch 3.54 3.54 4.33 5.11 5.11 7.08
mm 70 90 90 110 130 130 180 180 mm 90 90 110 130 130 180
WEIGHT lb 7.7 7.7 8.4 14.7 21.6 28.2 39.2 60.1 WEIGHT lb 7.7 8.4 14.7 21.6 28.2 39.2
kg 3.5 3.5 3.8 6.7 9.8 12.8 17.8 27.3 kg 3.5 3.8 6.7 9.8 12.8 17.8
FIGURE BT D88 FIGURE BT D8
PACKING T2 T2 T3 T5 T25 T6 T27 T8 PACKING T2 T3 T5 T25 T6 T27
GASKET 40x30 40x30 40x30 48x38 54x44 66x54 74x60 95x78 GASKET 40x30 40x30 48x38 54x44 66x54 74x60
CLASS 1500
FULL BORE REDUCED BORE
SIZE inch 1/4 3/8 1/2 3/4 1 1.1/4 1.1/2 2 SIZE inch 1/2 3/4 1 1.1/4 1.1/2 2
mm 6 10 15 20 25 32 40 50 mm 15 20 25 32 40 50
A inch 3.54 3.54 4.33 5.00 6.10 6.69 8.26 8.26 A inch 3.54 4.33 5.00 6.10 6.69 8.26
mm 90 90 110 127 155 170 210 210 mm 90 110 127 155 170 210
B Open inch 16.1 16.1 16.7 18.1 19.4 19.6 22.0 22.2 B Open inch 16.1 16.7 18.1 19.4 19.6 22.0
mm 410 410 425 460 494 500 560 566 mm 410 425 460 494 500 560
C inch 0.28 0.35 0.51 0.67 0.83 1.10 1.30 1.48 C inch 0.35 0.51 0.67 0.83 1.10 1.30
mm 7 9 13 17 21 28 33 37.5 mm 9 13 17 21 28 33
Handwheel inch 3.54 3.54 4.33 5.11 5.11 7.08 7.08 7.08 Handwheel inch 3.54 4.33 5.11 5.11 7.08 7.08
mm 90 90 110 130 130 180 180 180 mm 90 110 130 130 180 180
WEIGHT lb 9.0 9.0 14.9 25.3 29.7 40.3 69.3 68.2 WEIGHT lb 9.0 14.9 25.3 29.7 40.3 69.3
kg 4.1 4.1 6.8 11.5 13.5 18.3 31.5 31 kg 4.1 6.8 11.5 13.5 18.3 31.5
FIGURE BT D1515 FIGURE BT D15
PACKING T3 T3 T5 T6 T6 T27 T8 T918 PACKING T3 T5 T6 T6 T27 T8
GASKET 40x30 40x30 40x30 48x38 54x44 66x54 74x60 74x60 GASKET 40x30 40x30 48x38 54x44 66x54 74x60
73
CRYOGENIC VALVES
Design construction:
BS 5352
Testing according to API 598 - BS 6755
Marking MSS SP25
Ratings:
- carbon steel class 1500 3705 psig @ 100° F
255 bar + 38° C
B Open inch - - 18.7 20.0 21.1 - 23.4 25.3 B Open inch - - 20.0 21.6 21.65 - 25.2 26.3
mm - - 475 510 537 - 595 643 mm - - 510 550 550 - 640 670
C inch - - 0.55 0.75 0.94 - 1.45 1.89 C inch - - 0.51 0.67 0.83 - 1.30 1.48
mm - - 14 19 24 - 37 48 mm - - 13 17 21 - 33 37.5
Handwheel inch - - 4.33 5.11 9.84 - 11.8 11.8 Handwheel inch - - 4.33 5.11 5.11 - 9.84 11.8
mm - - 110 130 250 - 300 300 mm - - 110 130 130 - 250 300
WEIGHT lb - - 30.4 47.3 53.9 - 103.5 156.3 WEIGHT lb - - 30.5 47.3 55.0 - 101.3 160.8
kg - - 13.8 21.5 24.5 - 47 71 kg - - 13.8 21.5 25 - 46 73
FIGURE BT RJ S1515F FIGURE BT RJ D1515F
PACKING - - T5 T6 T6 - T8 T918 PACKING - - T5 T6 T6 - T8 T918
GASKET - - RJ-13 RJ-16 RJ-17 - RJ-21 RJ-24 GASKET - - RJ-13 RJ-16 RJ-17 - RJ-21 RJ-23
74
BELLOWS SEALED VALVES
73
BELLOWS SEALED VALVES
Environmental protection is a major concern for industry and regulators. The goal is to minimize exposure to dangerous
or harmfull substance by by meeting stringent pollution and environmental control standards. To insure that emissions
to the atmosphere do not occur , valve stem leakage has been addressed by using Calobri's newly engineered Bellows
Seal Valves. The introduction of this unique product has soldved many problems in critical applications where toxic or
noxious fluids are transported. Since the bellows assembly is welded to the stem and to the bonnet, the valve is
completly sealed. Calobri has developed a design approach utilizing machined transition ends allowing the bellows
to be easily welded to the stem and the bonnet. This results in improved joining welds and lower assembly costs.
CLASS DESIGN CONNECTION PORT STANDARD Screw & Yoke ENDS CALOBRI
800 Gate Welded bonnet -Bolted Bonnet Reduced API 602-BS5352 Outside Threaded and Socket Weld ends SF S8
800 Gate Welded bonnet -Bolted Bonnet Full API 602-BS5352 Outside Threaded and Socket Weld ends SF S88
1500 Gate Welded bonnet -Bolted Bonnet Reduced API 602-BS5352 Outside Threaded and Socket Weld ends SF S15
1500 Gate Welded bonnet -Bolted Bonnet Full API 602-BS5352 Outside Threaded and Socket Weld ends SF SF1515
800 Gate Welded Bonnet -Welded Bonnet Reduced API 602-BS5352 Outside Threaded and Socket Weld ends SF WS8
800 Gate Welded Bonnet -Welded Bonnet Full API 602-BS5352 Outside Threaded and Socket Weld ends SF WS88
1500 Gate Welded Bonnet -Welded Bonnet Reduced API 602-BS5352 Outside Threaded and Socket Weld ends SF WS15
1500 Gate Welded Bonnet -Welded Bonnet Full API 602-BS5352 Outside Threaded and Socket Weld ends SF WS1515
800 Globe Welded bonnet -Bolted Bonnet Reduced API 602-BS5352 Outside Threaded and Socket Weld ends SF D8
800 Globe Welded bonnet -Bolted Bonnet Full API 602-BS5352 Outside Threaded and Socket Weld ends SF D88
1500 Globe Welded bonnet -Bolted Bonnet Reduced API 602-BS5352 Outside Threaded and Socket Weld ends SF D15
1500 Globe Welded bonnet -Bolted Bonnet Full API 602-BS5352 Outside Threaded and Socket Weld ends SF D1515
800 Globe Welded Bonnet -Welded Bonnet Reduced API 602-BS5352 Outside Threaded and Socket Weld ends SF WD8
800 Globe Welded Bonnet -Welded Bonnet Full API 602-BS5352 Outside Threaded and Socket Weld ends SF WD88
1500 Globe Welded Bonnet -Welded Bonnet Reduced API 602-BS5352 Outside Threaded and Socket Weld ends SF WD15
1500 Globe Welded Bonnet -Welded Bonnet Full API 602-BS5352 Outside Threaded and Socket Weld ends SF WD1515
1500 Globe Y Pattern Welded Bonnet -Welded Bonnet Full API 602-BS5352 Outside Threaded and Socket Weld ends SF YD1515
2500 Globe Y Pattern Welded Bonnet -Welded Bonnet Full API 602-BS5352 Outside Threaded and Socket Weld ends SF YD25
76
BELLOWS SEALED VALVES
Design construction:
API 602 - BS 5352
Testing according to API 598 - BS 6755
Marking MSS SP25
GATE VALVES
CLASS 800
FULL BORE REDUCED BORE
SIZE inch 1/4 3/8 1/2 3/4 1 1.1/4 1.1/2 2 SIZE inch 1/2 3/4 1 1.1/4 1.1/2 2
mm 6 10 15 20 25 32 40 50 mm 15 20 25 32 40 50
A inch 3.14 3.14 3.54 4.33 5.00 5.00 5.00 8.26 A inch 3.14 3.54 4.33 5.00 5.00 5.00
mm 80 80 90 110 127 127 127 210 mm 80 90 110 127 127 127
B Open inch 10.3 10.3 11.6 13.9 16.2 18.5 20.9 25.6 B Open inch 10.3 11.6 13.9 16.2 16.2 20.9
mm 262 262 296 353 412 470 531 650 mm 262 296 353 412 470 531
C inch 0.31 0.38 0.55 0.70 0.94 1.18 1.45 1.89 C inch 0.38 0.55 0.70 0.94 1.18 1.45
mm 8 9.6 14 18 24 30 37 48 mm 9.6 14 18 24 30 37
Handwheel inch 3.14 3.14 3.14 4.33 5.11 5.11 7.08 7.08 Handwheel inch 3.14 3.14 4.33 5.11 5.11 7.08
mm 80 80 80 110 130 130 180 180 mm 80 80 110 130 130 180
Bolted B. Lb 4.8 4.8 6.6 9.3 17.4 19.8 32.6 73.8 Bolted B. Lb 4.8 4.8 9.3 17.4 19.8 32.6
Weight
Weight
Kg 2.2 2.2 3 4.2 7.9 9 14.8 33.5 Kg 2.2 3 4.2 7.9 9 14.8
Welded B. Lb 4.8 4.8 6.6 9.3 17.4 19.8 32.6 73.8 Welded B. Lb 4.8 4.8 9.3 17.4 19.8 32.6
Kg 2.2 2.2 3 4.2 7.9 9 14.8 33.5 Kg 2.2 3 4.2 7.9 9 14.8
FIGURE
CLASS 1500
FULL BORE REDUCED BORE
SIZE inch 1/4 3/8 1/2 3/4 1 1.1/4 1.1/2 2 SIZE inch 1/2 3/4 1 1.1/4 1.1/2 2
mm 6 10 15 20 25 32 40 50 mm 15 20 25 32 40 50
A inch 3.54 3.54 4.33 5.00 5.00 5.00 8.26 8.26 A inch 3.54 4.33 5.00 5.00 5.00 8.26
mm 90 90 110 127 127 127 210 210 mm 90 110 127 127 127 210
B Open inch 12.9 13.0 14.6 18.7 20.1 23.0 25.6 32.0 B Open inch 12.9 13.0 14.6 18.7 20.1 23.0
mm 328 331 372 475 510 586 650 815 mm 328 331 372 475 510 586
C inch 0.31 0.38 0.55 0.70 0.94 1.18 1.45 1.57 C inch 0.38 0.55 0.70 0.94 1.18 1.45
mm 8 9.6 14 18 24 30 37 40 mm 9.6 14 18 24 30 37
Handwheel inch 5.11 5.11 5.11 5.11 7.08 7.08 9.84 9.84 Handwheel inch 5.11 5.11 5.11 7.08 7.08 9.84
mm 130 130 130 130 180 180 250 250 mm 130 130 130 180 180 250
Bolted B. Lb 8.1 8.1 11.6 17.6 23.1 37.4 67.2 79.3 Bolted B. Lb 8.1 11.6 17.6 23.1 37.4 67.2
Weight
Weight
Welded B. Lb 8.1 8.1 11.6 17.6 23.1 37.4 67.2 79.3 Welded B. Lb 8.1 11.6 17.6 23.1 37.4 67.2
Kg 3.7 3.7 5.3 8 10.5 17 30.5 36 Kg 3.7 5.3 8 10.5 17 30.5
FIGURE
FIGURE
78
BELLOWS SEALED VALVES
Design construction:
API 602 - BS 5352
Testing according to API 598 - BS 6755
Marking MSS SP25
GLOBE VALVES
CLASS 800
FULL BORE REDUCED BORE
SIZE inch 1/4 3/8 1/2 3/4 1 1.1/4 1.1/2 2 SIZE inch 1/2 3/4 1 1.1/4 1.1/2 2
mm 6 10 15 20 25 32 40 50 mm 15 20 25 32 40 50
A inch 3.14 3.14 3.54 4.33 5.00 6.10 6.69 8.26 A inch 3.14 3.54 4.33 5.00 6.10 6.69
mm 80 80 90 110 127 155 170 210 mm 80 90 110 127 155 170
B Open inch 9.60 9.60 10.9 12.2 14.4 16.8 18.2 23.2 B Open inch 9.60 10.9 12.2 14.4 16.8 18.2
mm 244 244 276 311 366 428 462 590 mm 244 276 311 366 428 462
C inch 0.28 0.35 0.51 0.69 0.88 1.16 1.37 1.79 C inch 0.35 0.51 0.69 0.88 1.16 1.37
mm 7 9 13 17.5 22.5 29.5 35 45.5 mm 9 13 17.5 22.5 29.5 35
Handwheel inch 3.14 3.14 3.14 4.33 5.11 5.11 7.08 7.08 Handwheel inch 3.14 3.14 4.33 5.11 5.11 7.08
mm 80 80 80 110 130 130 180 180 mm 80 80 110 130 130 180
Bolted B. Lb 5.1 5.1 6.6 10.3 17.4 26.0 38.1 76.6 Bolted B. Lb 5.1 6.6 10.3 17.4 26.0 38.1
Weight
Weight
Kg 2.3 2.3 3.0 4.7 7.9 11.8 17.3 34.5 Kg 2.3 3.0 4.7 7.9 11.8 17.3
Welded B. Lb 5.1 5.1 6.6 10.3 17.4 26.0 38.1 76.6 Welded B. Lb 5.1 6.6 10.3 17.4 26.0 38.1
Kg 2.3 2.3 3.0 4.7 7.9 11.8 17.3 34.5 Kg 2.3 3.0 4.7 7.9 11.8 17.3
FIGURE
CLASS 1500
FULL BORE REDUCED BORE
SIZE inch 1/4 3/8 1/2 3/4 1 1.1/4 1.1/2 2 SIZE inch 1/2 3/4 1 1.1/4 1.1/2 2
mm 6 10 15 20 25 32 40 50 mm 15 20 25 32 40 50
A inch 3.54 3.54 4.33 5.00 6.10 6.69 8.26 8.26 A inch 3.54 4.33 5.00 6.10 6.69 8.26
mm 90 90 110 127 155 170 210 210 mm 90 110 127 155 170 210
B Open inch 11.7 11.8 13.0 16.7 17.7 19.9 21.4 27.7 B Open inch 11.8 13.0 16.7 17.7 19.9 21.4
mm 298 301 332 425 450 506 545 705 mm 301 332 425 450 506 545
C inch 0.28 0.35 0.51 0.67 0.83 1.10 1.30 1.48 C inch 0.35 0.51 0.67 0.83 1.10 1.30
mm 7 9 13 17 21 28 33 37.5 mm 9 13 17 21 28 33
Handwheel inch 3.14 5.11 5.11 5.11 7.08 7.08 9.84 9.84 Handwheel inch 5.11 5.11 5.11 7.08 7.08 9.84
mm 80 130 130 130 180 180 250 250 mm 130 130 130 180 180 250
Bolted B. Lb 7.7 7.7 11.0 16.3 22.0 35.7 64.5 73.3 Bolted B. Lb 7.7 11.0 16.3 22.0 35.7 64.5
Weight
Weight
Welded B. Lb 7.7 7.7 11.0 16.3 22.0 35.7 64.5 73.3 Welded B. Lb 7.7 11.0 16.3 22.0 35.7 64.5
Kg 3.5 3.5 5 7.4 10 16.2 29 33 Kg 3.5 5 7.4 10 16.2 29
FIGURE
FIGURE
79
BELLOWS SEALED VALVES
Design construction:
BS 5352 - ASME B16.34
Testing according to API 598 - BS 6755
Marking MSS SP25
B Open inch 11.8 11.8 11.6 15.2 15.4 18.7 21.8 28.3
mm 300 300 295 388 393 475 556 720
Handwheel inch 5.11 5.11 5.11 5.11 7.08 7.08 9.84 9.84
mm 130 130 130 130 180 180 250 250
80
ECO - L - VALVES®
79
ECO - L - VALVES®
The important feature of Eco-L-Valve is that the bellows can be replaced , the entire procedure does not require more
than 15 minutes of maintenance time. By utilizing this arrangement, preventative maitenance can be a meaningful strategy
to help optimize the service life of these valves, especially when very high levels of cycles are needed. Another
significant feature of the Eco-L-Valve is its compact height. The cyclic efficiency of the bellows stem seal, makes it
possible to supply a valve with a height comparable to a packed valve threby allowing direct replacement in existing
piping systems. Introduction of the Eco-L-Valve to the marketplace was planned so as to offer a reasonably priced
bellows seal product with easily replaced parts. These characteristics justified useage in a myriad of applications within
a process plant where a leak tight performance and economical pricing are a neccessity.
CLASS DESIGN CONNECTION PORT STANDARD Screw & Yoke ENDS CALOBRI
800 Globe Bolted Bonnet Reduced API602 Outside Threaded and Socket Weld ends E D8
800 Globe Bolted Bonnet Full API602 Outside Threaded and Socket Weld ends E D88
800 Globe Welded Bonnet Reduced API602 Outside Threaded and Socket Weld ends E WD8
800 Globe Welded Bonnet Full API602 Outside Threaded and Socket Weld ends E WD88
150 Globe Bolted Bonnet Reduced API602 Outside Integral Flanged to ASME B16.5 E D1
300 Globe Bolted Bonnet Reduced API602 Outside Integral Flanged to ASME B16.5 E D3
600 Globe Bolted Bonnet Reduced API602 Outside Integral Flanged to ASME B16.5 E D6
150 Globe Welded Bonnet Reduced API602 Outside Integral Flanged to ASME B16.5 E WD1
300 Globe Welded Bonnet Reduced API602 Outside Integral Flanged to ASME B16.5 E WD3
600 Globe Welded Bonnet Reduced API602 Outside Integral Flanged to ASME B16.5 E WD6
800 Globe Y Pattern Welded Bonnet Full API602 Outside Threaded and Socket Weld ends E W-YD8
150 Globe Y Pattern Welded Bonnet Reduced API602 Outside Welded Flanged to ASME B16.5 E W-YD1
300 Globe Y Pattern Welded Bonnet Reduced API602 Outside Welded Flanged to ASME B16.5 E W-YD3
600 Globe Y Pattern Welded Bonnet Reduced API602 Outside Welded Flanged to ASME B16.5 E W-YD6
82
ECO - L - VALVES®
CLASS 800
BOLTED BONNET BOLTED BONNET
FULL BORE 1/4 3/8 1/2 3/4 1 1.1/4 1.1/2 2 REDUCED BORE 1/2 3/4 1 1.1/4 1.1/2 2
End to End A inch 3.14 3.14 3.54 4.33 5.00 6.10 6.69 8.26 End to End A inch 3.14 3.54 4.33 5.00 6.10 6.69
mm 80 80 90 110 127 155 170 210 mm 80 90 110 127 155 170
Handwheel B inch 3.14 3.14 3.14 4.33 5.11 7.08 7.08 7.08 Handwheel B inch 3.14 3.14 4.33 5.11 7.08 7.08
mm 80 80 80 110 130 180 180 180 mm 80 80 110 130 180 180
Center to Top Open C inch 5.34 5.34 5.65 6.57 7.63 8.64 9.03 10.2 Center to Top Open C inch 5.34 5.65 6.57 7.63 8.64 9.03
mm 136 136 144 167 194 220 230 260 mm 136 144 167 194 220 230
Dia. of Port D inch 0.28 0.35 0.51 0.69 0.89 1.16 1.38 1.79 Dia. of Port D inch 0.35 0.51 0.69 0.89 1.16 1.38
mm 7 9 13 17.5 22.5 29.5 35 45.5 mm 9 13 17.5 22.5 29.5 35
Approx. WEIGHT - Lb 3.7 3.7 5.0 7.9 12.9 16.5 25.5 45.8 Approx. WEIGHT - Lb 3.7 5.0 7.9 12.9 16.5 25.5
Kg 1.7 1.7 2.3 3.6 5.9 7.5 11.6 20.8 Kg 1.7 2.3 3.6 5.9 7.5 11.6
FIGURE E D88 FIGURE E D8
CLASS 800
WELDED BONNET WELDED BONNET
FULL BORE 1/4 3/8 1/2 3/4 1 1.1/4 1.1/2 2 REDUCED BORE 1/2 3/4 1 1.1/4 1.1/2 2
End to End A inch 3.14 3.14 3.54 4.33 5.00 6.10 6.69 8.26 End to End A inch 3.14 3.54 4.33 5.00 6.10 6.69
mm 80 80 90 110 127 155 170 210 mm 80 90 110 127 155 170
Handwheel B inch 3.14 3.14 3.14 4.33 4.33 7.08 7.08 7.08 Handwheel B inch 3.14 3.14 4.33 4.33 7.08 7.08
mm 80 80 80 110 110 180 180 180 mm 80 80 110 110 180 180
Center to Top Open C inch 3.54 3.54 5.65 6.57 7.63 8.64 9.03 10.2 Center to Top Open C inch 3.54 5.65 6.57 7.63 8.64 9.03
mm 136 136 144 167 194 220 230 260 mm 136 144 167 194 220 230
Dia. of Port D inch 0.28 0.35 0.51 0.69 0.89 1.16 1.38 1.79 Dia. of Port D inch 0.35 0.51 0.69 0.89 1.16 1.38
mm 7 9 13 17.5 22.5 29.5 35 45.5 mm 9 13 17.5 22.5 29.5 35
Approx. WEIGHT - Lb 3.7 3.7 5.0 7.9 12.9 16.0 23.1 41.8 Approx. WEIGHT - Lb 3.7 5.0 7.9 12.9 16.0 23.1
Kg 1.7 1.7 2.3 3.6 5.9 7.3 10.5 19.0 Kg 1.7 2.3 3.6 5.9 7.3 10.5
FIGURE EW D88 FIGURE EW D8
84
ECO - L - VALVES®
End to End Class 300 A inch 6.02 7.00 7.99 - 9.01 10.5
mm 153 178 203 - 229 267
85
ECO - L - VALVES®
Design construction: Outside Screw and Yoke (OS&Y) Screwed Ends (NOT) to ANSIB1.20.1
API 602 Self aligning packing gland in two parts Flanged End to End dimensions
Testing according to API 598 - BS 6755 Spiral-wound gasket retained type according to ANSI B16.5
Marking MSS SP25 Integral backseat
Socket weld Ends to ANSI B16.11
CLASS 800
WELDED BONNET - Threaded and Socket Weld Ends
FULL BORE 1/4 3/8 1/2 3/4 1 1.1/4 1.1/2 2
End to End A inch 3.54 3.54 3.54 3.54 5.00 5.00 6.10 7.08
mm 90 90 90 90 127 127 155 180
Handwheel B inch 3.14 3.14 3.14 4.33 5.11 5.11 7.08 7.08
mm 80 80 80 110 130 130 180 180
Center to Top Open C inch 6.10 6.10 6.10 6.88 8.66 9.44 11.02 12.6
mm 155 155 155 175 220 240 280 320
Dia. of Port D inch 0.28 0.35 0.51 0.69 0.89 1.16 1.38 1.79
mm 7 9 13 17.5 22.5 29.5 35 45.5
Approx. WEIGHT - Lb 3.3 3.3 3.3 4.85 9.9 11.6 19.8 20.2
Kg 1.5 1.5 1.5 2.2 4.5 5.3 9.0 9.2
FIGURE EW-YD8
86
TECHNICAL DATA
85
PRESSURE TEMPERATURE RATINGS
A105 LF2 METRIC A105 LF2 PSI
T °C PN20 PN50 PN100 PN140 PN150 PN250 PN420 PN760 °F 150# 300# 600# 800# 900# 1500# 2500# 4500#
(BAR) (BAR) (BAR) (BAR) (BAR) (BAR) (BAR) (BAR) - (PSI) (PSI) (PSI) (PSI) (PSI) (PSI) (PSI) (PSI)
-29 19.7 51.0 102.1 136.2 153.1 255.5 425.5 766.2 -20 285 740 1480 1975 2220 3705 6170 11110
0 19.7 51.0 102.1 136.2 153.1 255.5 425.5 766.2 100 285 740 1480 1975 2220 3705 6170 11110
50 19.3 50.0 100.1 133.6 150.1 250.5 417.2 751.2 200 260 675 1350 1800 2025 3375 5625 10120
100 17.7 46.4 92.8 123.7 139.2 232.0 386.6 695.7 300 230 655 1315 1750 1970 3280 5470 9845
150 15.8 45.1 90.6 120.6 135.8 226.1 377.0 678.5 400 200 635 1270 1690 1900 3170 5280 9505
200 14.0 43.9 87.8 116.9 131.4 219.2 365.2 657.4 500 170 600 1200 1595 1795 2995 4990 8980
250 12.1 41.8 83.6 111.1 125.1 208.7 347.6 625.7 600 140 550 1095 1460 1640 2735 4560 8210
300 10.2 38.9 77.5 103.3 116.1 193.6 322.8 581.1 650 125 535 1075 1430 1610 2685 4475 8055
350 8.4 36.9 74.0 98.5 110.9 184.8 308.0 554.4 700 110 535 1065 1420 1600 2665 4440 7990
375 7.4 36.6 72.9 97.2 109.5 182.4 303.9 546.9 750 95 505 1010 1345 1510 2520 4200 7560
400 6.5 34.6 69.1 92.1 103.4 172.5 287.5 517.5 800 80 410 825 1100 1235 2060 3430 6170
425 5.6 28.7 57.7 76.9 86.3 144.0 239.7 431.3
Notes for pressure temperature tables: 2. A105, LF2 can be used up to 8000F (4270F) 5. F5, F9, F91 can be used up to 12000F (6500F)
3. LF2 is suitable for use down to -500F( –460C) 6. F304, F316, F321, F347 can be used down to –3200F (-1980C)
1. Class 150 flanged end ratings end at 10000F (5380C) 4. F11, F22 can be used up to 11000F (5930C) 7. Over 10000F (5380C) F304, F316, F321, F347 with 0.04% min. carbon
88
PRESSURE TEMPERATURE RATING
F22 METRIC F22 PSI
T °C PN20 PN50 PN100 PN140 PN150 PN250 PN420 PN760 °F 150# 300# 600# 800# 900# 1500# 2500# 4500#
(BAR) (BAR) (BAR) (BAR) (BAR) (BAR) (BAR) (BAR) - (PSI) (PSI) (PSI) (PSI) (PSI) (PSI) (PSI) (PSI)
-29 20.0 51.7 103.4 137.9 155.2 258.6 431.0 775.9 -20 290 750 1500 2000 2250 3750 6250 11250
0 20.0 51.7 103.4 137.9 155.2 258.6 431.0 775.9 100 290 750 1500 2000 2250 3750 6250 11250
50 19.5 51.7 103.4 137.9 155.2 258.6 431.0 775.9 200 260 750 1500 2000 2250 3750 6250 11250
100 17.7 51.6 103.1 137.4 154.6 257.7 429.5 773.2 300 230 730 1455 1940 2185 3640 6070 10925
150 15.8 50.3 100.3 133.7 150.6 250.9 418.4 753.0 400 200 705 1410 1880 2115 3530 5880 10585
200 14.0 48.8 97.5 130.0 146.2 244.1 406.6 731.9 500 170 665 1330 1775 1995 3325 5540 9965
250 12.1 46.3 92.7 123.7 139.0 231.8 386.2 694.7 600 140 605 1210 1615 1815 3025 5040 9070
300 10.2 42.9 85.8 114.5 128.6 214.4 357.2 642.8 650 125 590 1175 1570 1765 2940 4905 8825
350 8.4 40.4 80.4 107.4 120.7 201.1 335.4 603.5 700 110 570 1135 1515 1705 2840 4730 8515
375 7.4 38.9 77.6 103.6 116.5 194.1 323.3 582.0 750 95 530 1065 1420 1595 2660 4430 7970
400 6.5 36.5 73.3 97.8 109.8 183.1 305.0 548.7 800 80 510 1015 1355 1525 2540 4230 7610
425 5.6 35.3 70.2 93.7 105.5 175.7 292.6 526.3 850 65 485 975 1300 1460 2435 4060 7305
450 4.6 33.7 67.7 90.3 101.4 169.1 281.9 507.2 900 50 450 900 1200 1350 2245 3745 6740
475 3.7 31.7 63.4 84.6 95.1 158.2 263.9 475.0 950 35 375 755 1005 1130 1885 3145 5665
500 2.8 27.7 55.7 74.2 83.4 138.9 231.8 417.4 1000 20 260 520 695 780 1305 2170 3910
525 1.9 21.6 43.3 57.8 64.9 108.4 180.6 325.3 1050 20 175 350 465 525 875 1455 2625
550 1.4 15.4 30.7 41.0 46.1 77.0 128.0 230.7 1100 20 110 220 295 330 550 915 1645
575 1.4 10.5 21.1 28.1 31.6 52.7 87.7 158.1 1150 20 70 135 180 205 345 570 1030
600 1.4 6.9 13.8 18.4 20.7 34.5 57.4 103.3 1200 20 40 80 110 125 205 345 615
625 1.4 4.5 8.8 11.7 13.4 22.4 37.1 67.0
649 1.4 2.8 5.5 7.6 8.6 14.1 23.8 42.4
F5 METRIC F5 PSI
T °C PN20 PN50 PN100 PN140 PN150 PN250 PN420 PN760 °F 150# 300# 600# 800# 900# 1500# 2500# 4500#
(BAR) (BAR) (BAR) (BAR) (BAR) (BAR) (BAR) (BAR) - (PSI) (PSI) (PSI) (PSI) (PSI) (PSI) (PSI) (PSI)
-29 20.0 51.7 103.4 137.9 155.2 258.6 431.0 775.9 -20 290 750 1500 2000 2250 3750 6250 11250
0 20.0 51.7 103.4 137.9 155.2 258.6 431.0 775.9 100 290 750 1500 2000 2250 3750 6250 11250
50 19.5 51.6 103.3 137.7 154.9 258.2 430.4 774.6 200 260 745 1490 1985 2235 3725 6205 11170
100 17.7 51.1 102.3 136.3 153.4 255.7 425.9 766.8 300 230 715 1430 1910 2150 3580 5965 10740
150 15.8 49.3 98.6 131.7 148.2 246.8 411.3 740.5 400 200 705 1410 1880 2115 3530 5880 10585
200 14.0 48.7 97.4 129.8 146.1 243.7 406.0 730.9 500 170 665 1330 1775 1995 3325 5540 9965
250 12.1 46.3 92.7 123.6 139.0 231.7 386.1 694.5 600 140 605 1210 1615 1815 3025 5040 9070
300 10.2 42.9 85.8 114.5 128.6 214.4 357.2 642.8 650 125 590 1175 1570 1765 2940 4905 8825
350 8.4 40.4 80.4 107.4 120.7 201.1 335.4 603.5 700 110 570 1135 1515 1705 2840 4730 8515
375 7.4 38.9 77.5 103.5 116.4 193.9 323.0 581.5 750 95 530 1055 1410 1585 2640 4400 7920
400 6.5 36.5 72.6 97.1 109.1 181.8 303.0 545.4 800 80 510 1015 1355 1525 2540 4230 7610
425 5.6 35.3 70.2 93.7 105.4 175.6 292.4 526.1 850 65 485 965 1290 1450 2415 4030 7250
450 4.6 33.7 67.1 89.7 100.8 167.9 280.1 504.0 900 50 370 740 985 1110 1850 3085 5555
475 3.7 27.6 55.1 73.4 82.6 137.7 229.7 413.5 950 35 275 550 735 825 1370 2285 4115
500 2.8 21.3 42.6 56.9 64.0 106.4 177.4 319.5 1000 20 200 400 530 595 995 1655 2985
525 1.9 16.2 32.3 43.1 48.3 80.5 134.1 241.7 1050 20 145 290 385 430 720 1200 2160
550 1.4 12.1 24.2 32.2 36.0 60.3 100.3 180.8 1100 20 100 200 265 300 495 830 1490
575 1.4 8.9 17.9 23.7 26.6 44.4 74.1 133.3 1150 20 60 125 165 185 310 515 925
600 1.4 6.2 12.6 16.6 18.8 31.1 52.0 93.4 1200 20 35 70 95 105 170 285 515
625 1.4 3.9 8.1 10.7 12.0 20.0 33.3 59.8
649 1.4 2.4 4.8 6.6 7.2 11.7 19.7 35.5
Notes for pressure temperature tables: 2. A105, LF2 can be used up to 8000F (4270F) 5. F5, F9, F91 can be used up to 12000F (6500F)
3. LF2 is suitable for use down to -500F( –460C) 6. F304, F316, F321, F347 can be used down to –3200F (-1980C)
1. Class 150 flanged end ratings end at 10000F (5380C) 4. F11, F22 can be used up to 11000F (5930C) 7. Over 10000F (5380C) F304, F316, F321, F347 with 0.04% min. carbon
89
PRESSURE TEMPERATURE RATINGS
F9 METRIC F9 PSI
T °C PN20 PN50 PN100 PN140 PN150 PN250 PN420 PN760 °F 150# 300# 600# 800# 900# 1500# 2500# 4500#
(BAR) (BAR) (BAR) (BAR) (BAR) (BAR) (BAR) (BAR) - (PSI) (PSI) (PSI) (PSI) (PSI) (PSI) (PSI) (PSI)
-29 20.0 51.7 103.4 137.9 155.2 258.6 431.0 775.9 -20 90 750 1500 2000 2250 3750 6250 11250
0 20.0 51.7 103.4 137.9 155.2 258.6 431.0 775.9 100 290 750 1500 2000 2250 3750 6250 11250
50 19.5 51.7 103.4 137.9 155.2 258.6 431.0 775.9 200 260 750 1500 2000 2250 3750 6250 11250
100 17.7 51.6 103.1 137.4 154.6 257.7 429.5 773.2 300 230 730 1455 1940 2185 3640 6070 10925
150 15.8 50.3 100.3 133.7 150.6 250.9 418.4 753.0 400 200 705 1410 1880 2115 3530 5880 10585
200 14.0 48.8 97.5 130.0 146.2 244.1 406.6 731.9 500 170 665 1330 1775 1995 3325 5540 9965
250 12.1 46.3 92.7 123.7 139.0 231.8 386.2 694.7 600 140 605 1210 1615 1815 3025 5040 9070
300 10.2 42.9 85.8 114.5 128.6 214.4 357.2 642.8 650 125 590 1175 1570 1765 2940 4905 8825
350 8.4 40.4 80.4 107.4 120.7 201.1 335.4 603.5 700 110 570 1135 1515 1705 2840 4730 8515
375 7.4 38.9 77.6 103.6 116.5 194.1 323.3 582.0 750 95 530 1065 1420 1595 2660 4430 7970
400 6.5 36.5 73.3 97.8 109.8 183.1 305.0 548.7 800 80 510 1015 1355 1525 2540 4230 7610
425 5.6 35.3 70.2 93.7 105.5 175.7 292.6 526.3 850 65 485 975 1300 1460 2435 4060 7305
450 4.6 33.7 67.7 90.3 101.4 169.1 281.9 507.2 900 50 450 900 1200 1350 2245 3745 6740
475 3.7 31.7 63.4 84.6 95.1 158.2 263.9 475.0 950 35 375 755 1005 1130 1885 3145 5655
500 2.8 27.7 55.7 74.2 83.4 138.9 231.8 416.9 1000 20 255 505 675 760 1270 2115 3805
525 1.9 21.4 42.8 57.0 64.2 107.1 178.5 321.1 1050 20 170 345 460 515 855 1430 2570
550 1.4 15.0 30.0 40.0 45.0 75.0 125.1 224.9 1100 20 115 225 300 340 565 945 1695
575 1.4 10.4 21.0 28.0 31.4 52.2 87.2 156.7 1150 20 75 150 200 225 375 630 1130
600 1.4 7.3 14.3 19.0 21.5 35.8 60.0 107.5 1200 20 50 105 140 155 255 430 770
625 1.4 4.9 9.9 13.2 14.8 24.7 41.5 74.5
649 1.4 3.4 7.2 9.7 10.7 17.6 29.7 53.1
Notes for pressure temperature tables: 2. A105, LF2 can be used up to 8000F (4270F) 5. F5, F9, F91 can be used up to 12000F (6500F)
3. LF2 is suitable for use down to -500F( –460C) 6. F304, F316, F321, F347 can be used down to –3200F (-1980C)
1. Class 150 flanged end ratings end at 10000F (5380C) 4. F11, F22 can be used up to 11000F (5930C) 7. Over 10000F (5380C) F304, F316, F321, F347 with 0.04% min. carbon
90
PRESSURE TEMPERATURE RATINGS
F316 METRIC F316 PSI
T °C PN20 PN50 PN100 PN140 PN150 PN250 PN420 PN760 °F 150# 300# 600# 800# 900# 1500# 2500# 4500#
(BAR) (BAR) (BAR) (BAR) (BAR) (BAR) (BAR) (BAR) - (PSI) (PSI) (PSI) (PSI) (PSI) (PSI) (PSI) (PSI)
-29 19.0 49.7 99.3 132.4 149.0 248.3 413.8 744.8 -20 75 720 1440 1920 2160 3600 6000 10800
0 19.0 49.7 99.3 132.4 149.0 248.3 413.8 744.8 100 275 720 1440 1920 2160 3600 6000 10800
38 19.0 49.7 99.3 132.4 149.0 248.3 413.8 744.8 200 235 620 1240 1655 1860 3095 5160 9290
50 18.4 48.1 96.3 128.4 144.4 240.6 401.0 721.9 300 215 560 1120 1495 1680 2795 4660 8390
100 16.0 42.3 84.5 112.8 126.8 211.0 351.7 633.2 400 195 515 1025 1370 1540 2570 4280 7705
150 14.8 38.6 77.1 102.9 115.7 192.4 320.9 577.7 500 170 480 955 1275 1435 2390 3980 7165
200 13.6 35.8 71.2 95.2 107.0 178.5 297.3 535.2 600 140 450 900 1205 1355 2255 3760 6770
250 12.0 33.5 66.8 89.1 100.3 167.1 278.3 501.0 650 125 445 890 1185 1330 2220 3700 6660
300 10.2 31.6 63.1 84.5 95.0 158.1 263.6 474.5 700 110 430 870 1160 1305 2170 3620 6515
350 8.4 30.4 61.0 81.3 91.3 152.3 253.8 456.9 750 95 425 855 1140 1280 2135 3560 6410
375 7.4 29.6 59.9 79.8 89.8 149.3 249.1 448.3 800 80 420 845 1125 1265 2110 3520 6335
400 6.5 29.3 58.9 78.6 88.2 147.2 245.4 441.9 850 65 420 835 1115 1255 2090 3480 6265
425 5.6 29.0 58.3 77.6 87.3 145.6 242.9 437.2 900 50 415 830 1105 1245 2075 3460 6230
450 4.6 29.0 57.7 77.0 86.7 144.4 240.4 432.8 950 35 385 775 1030 1160 1930 3220 5795
475 3.7 28.7 57.3 76.4 86.0 143.4 239.0 430.3 1000 20 350 700 935 1050 1750 2915 5245
500 2.8 27.3 54.8 72.9 82.1 136.7 228.0 410.5 1050 20 345 685 915 1030 1720 2865 5155
525 1.9 25.2 50.7 67.5 75.9 126.4 210.7 379.2 1100 20 305 610 815 915 1525 2545 4575
550 1.4 24.0 47.8 63.9 71.8 119.8 199.5 359.0 1150 20 235 475 630 710 1185 1970 3550
575 1.4 22.9 45.5 60.8 68.3 114.0 190.1 341.9 1200 20 185 370 495 555 925 1545 2775
600 1.4 19.9 39.8 53.1 59.7 99.5 166.0 298.6 1250 20 145 295 20 440 735 1230 2210
625 1.4 15.7 31.7 42.1 47.5 79.2 131.8 237.3 1300 20 115 235 20 350 585 970 1750
650 1.4 12.6 25.3 33.2 38.0 63.3 105.7 189.8 1350 20 95 190 20 290 480 800 1440
675 1.4 10.2 20.7 27.3 31.5 51.5 86.1 154.8 1400 20 75 150 20 225 380 630 1130
700 1.4 8.3 16.9 22.3 25.1 42.0 69.8 125.8 1450 20 60 115 15 175 290 485 875
725 1.4 6.9 13.9 18.6 21.1 35.0 58.2 104.9 1500 20 40 85 10 125 205 345 620
750 1.4 5.7 11.3 15.2 17.1 28.7 47.7 85.6
775 1.4 4.6 9.0 12.1 13.7 22.9 38.0 68.4
800 1.4 3.5 7.0 9.3 10.6 17.4 29.2 52.6
816 1.4 2.8 5.9 7.6 8.4 14.1 23.8 42.8
Notes for pressure temperature tables: 2. A105, LF2 can be used up to 8000F (4270F) 5. F5, F9, F91 can be used up to 12000F (6500F)
3. LF2 is suitable for use down to -500F( –460C) 6. F304, F316, F321, F347 can be used down to –3200F (-1980C)
1. Class 150 flanged end ratings end at 10000F (5380C) 4. F11, F22 can be used up to 11000F (5930C) 7. Over 10000F (5380C) F304, F316, F321, F347 with 0.04% min. carbon
91
PRESSURE TEMPERATURE RATINGS
F347 METRIC F347 PSI
T °C PN20 PN50 PN100 PN140 PN150 PN250 PN420 PN760 °F 150# 300# 600# 800# 900# 1500# 2500# 4500#
(BAR) (BAR) (BAR) (BAR) (BAR) (BAR) (BAR) (BAR) - (PSI) (PSI) (PSI) (PSI) (PSI) (PSI) (PSI) (PSI)
-29 19.0 49.7 99.3 132.4 149.0 248.3 413.8 744.8 -20 275 720 1440 1920 2160 3600 6000 10800
50 18.7 48.7 97.5 130.0 146.2 243.7 406.2 731.2 100 275 720 1440 1920 2160 3600 6000 10800
100 17.4 45.1 90.3 120.4 135.4 225.7 376.2 677.1 200 255 660 1320 1760 1980 3300 5500 9900
150 15.8 42.4 84.7 113.0 127.1 211.4 352.6 634.7 300 230 615 1230 1640 1845 3070 5120 9215
200 14.0 39.9 79.4 106.1 119.3 199.0 331.5 596.8 400 200 575 1145 1530 1720 2870 4780 8605
250 12.1 37.7 75.3 100.4 113.0 188.3 313.9 565.0 500 170 540 1080 1440 1620 2700 4500 8100
300 10.2 36.0 71.8 95.8 107.8 179.8 299.4 539.0 600 140 515 1025 1370 1540 2570 4280 7705
350 8.4 34.7 69.3 92.3 103.7 173.0 288.3 519.0 650 125 505 1010 1345 1510 2520 4200 7560
375 7.4 34.1 68.2 90.9 102.3 170.2 283.9 511.0 700 110 495 990 1320 1485 2470 4120 7415
400 6.5 33.8 67.9 90.3 101.7 169.6 282.6 508.8 750 95 490 985 1310 1475 2460 4100 7380
425 5.6 33.5 67.3 89.7 100.8 168.0 280.2 504.4 800 80 485 975 1300 1460 2435 4060 7310
450 4.6 33.4 67.0 89.4 100.4 167.4 278.8 501.8 850 65 485 970 1295 1455 2425 4040 7270
475 3.7 31.7 63.3 84.5 95.0 158.1 263.6 474.3 900 50 450 900 1200 1350 2245 3745 6740
500 2.8 28.2 56.6 75.3 84.7 140.9 235.1 423.1 950 35 385 775 1030 1160 1930 3220 5795
525 1.9 25.8 51.6 68.8 77.4 129.0 215.0 386.8 1000 20 365 725 970 1090 1820 3030 5450
550 1.4 25.0 49.8 66.6 74.9 124.9 208.1 374.3 1050 20 360 720 960 1080 1800 3000 5400
575 1.4 24.0 47.9 63.9 71.8 119.7 199.5 359.2 1100 20 325 645 860 965 1610 2685 4835
600 1.4 21.6 42.9 57.2 64.2 107.1 178.6 321.5 1150 20 275 550 735 825 1370 2285 4115
625 1.4 18.0 36.0 48.0 53.9 89.5 149.3 268.9 1200 20 170 345 460 515 855 1430 2570
650 1.4 11.6 23.5 30.5 35.1 58.3 97.5 175.3 1250 20 125 245 20 370 615 1030 1850
700 1.4 6.9 13.4 1.4 20.3 33.7 56.0 100.9 1300 20 95 185 20 280 465 770 1390
725 1.4 5.3 10.2 1.4 15.5 25.9 42.9 77.5 1350 20 70 135 20 205 345 570 1030
750 1.4 4.2 8.2 1.4 12.4 20.7 34.2 62.0 1400 20 55 110 20 165 275 455 825
775 1.4 3.2 6.5 1.2 9.9 16.4 27.3 49.1 1450 20 40 80 15 125 205 345 615
800 1.2 2.6 5.2 0.9 8.0 13.1 22.0 39.4 1500 15 35 70 10 105 170 285 515
Notes for pressure temperature tables: 2. A105, LF2 can be used up to 8000F (4270F) 5. F5, F9, F91 can be used up to 12000F (6500F)
3. LF2 is suitable for use down to -500F( –460C) 6. F304, F316, F321, F347 can be used down to –3200F (-1980C)
1. Class 150 flanged end ratings end at 10000F (5380C) 4. F11, F22 can be used up to 11000F (5930C) 7. Over 10000F (5380C) F304, F316, F321, F347 with 0.04% min. carbon
92
FLANGE DIMENSION
FLANGES ANSI - B16.5 RAISED FACE 600 & 1500 lb RING JOINT FACE
CLASS
Size A C D B Ring N.
N Size H M F
1/2 3.50 89 0.44 11.5 1.38 34.9 2.38 60.3 4 0.62 16 - - - -
3/4 3.88 98 0.50 13.0 1.69 42.9 2.75 69.8 4 0.62 16 - - - -
1 4.25 108 0.56 14.5 2.00 50.8 3.12 79.4 4 0.62 16 2.50 63.5 1.875 47.62 0.250 6.3 R 15
150
1.1/4 4.62 117 0.62 16.0 2.50 63.5 3.50 88.9 4 0.62 16 2.88 73.0 2.250 57.15 0.250 6.3 R 17
1.1/2 5.00 127 0.69 17.5 2.88 73.0 3.88 98.4 4 0.62 16 3.25 82.5 2.562 65.07 0.250 6.3 R 19
2 6.00 152 0.75 19.5 3.62 92.1 4.75 120.6 4 0.75 20 4.00 102.0 3.250 82.55 0.250 6.3 R 22
1/2 3.75 95 0.56 14.5 1.38 34.9 2.62 66.7 4 0.62 16 2.00 51.0 1.344 34.14 0.219 5.6 R 11
3/4 4.62 117 0.62 16.0 1.69 42.9 3.25 82.5 4 0.75 20 2.50 63.5 1.688 42.88 0.250 6.3 R 13
1 4.88 124 0.69 17.5 2.00 50.8 3.50 88.9 4 0.75 20 2.75 70.0 2.000 50.80 0.250 6.3 R 16
300
1.1/4 5.25 133 0.75 19.5 2.50 63.5 3.88 98.4 4 0.75 20 3.12 79.5 2.375 60.32 0.250 6.3 R 18
1.1/2 6.12 156 0.81 21.0 2.88 73.0 4.50 114.3 4 0.88 23 3.56 90.5 2.688 68.28 0.250 6.3 R 20
2 6.50 165 0.88 22.5 3.62 92.1 5.00 127.0 8 0.75 20 4.25 108.0 3.250 82.55 0.312 7.9 R 23
1/2 3.75 95 0.56 14.5 1.38 34.9 2.62 66.7 4 0.62 16 2.00 51.0 1.344 34.14 0.219 5.6 R 11
3/4 4.62 117 0.62 16.0 1.69 42.9 3.25 82.5 4 0.75 20 2.50 63.5 1.688 42.88 0.250 6.3 R 13
1 4.88 124 0.69 17.5 2.00 50.8 3.50 88.9 4 0.75 20 2.75 70.0 2.000 50.80 0.250 6.3 R 16
600
1.1/4 5.25 133 0.81 21.0 2.50 63.5 3.88 98.4 4 0.75 20 3.12 79.5 2.375 60.32 0.250 6.3 R 18
1.1/2 6.12 156 0.88 22.5 2.88 73.0 4.50 114.3 4 0.88 23 3.56 90.5 2.688 68.28 0.250 6.3 R 20
2 6.50 165 1.00 25.5 3.62 92.1 5.00 127.0 8 0.75 20 4.25 108.0 3.250 82.55 0.312 7.9 R 23
1/2 4.75 121 0.88 22.5 1.38 34.9 3.25 82.5 4 0.88 23 2.38 60.5 1.562 39.67 0.250 6.3 R 12
3/4 5.12 130 1.00 25.5 1.69 42.9 3.50 88.9 4 0.88 23 2.62 66.5 1.750 44.45 0.250 6.3 R 14
1 5.88 149 1.12 29.0 2.00 50.8 4.00 101.6 4 1.00 26 2.81 71.5 2.000 50.80 0.250 6.3 R 16
1500
1.1/4 6.25 159 1.12 29.0 2.50 63.5 4.38 111.1 4 1.00 26 3.19 81.0 2.375 60.32 0.250 6.3 R 18
1.1/2 7.00 178 1.25 32.0 2.88 73.0 4.88 123.8 4 1.12 29 3.62 92.0 2.688 68.28 0.250 6.3 R 20
2 8.50 216 1.50 38.5 3.62 92.1 6.50 165.1 8 1.00 26 4.88 124.0 3.750 95.25 0.312 7.9 R 24
1/2 5.23 133 1.20 30.5 1.38 34.9 3.50 88.9 4 0.88 23 2.55 65.0 1.688 42.88 0.250 6.3 R 13
3/4 5.51 140 1.25 32.0 1.69 42.9 3.74 95.2 4 0.88 23 2.87 73.0 2.000 50.80 0.250 6.3 R 16
1 6.25 159 1.37 35.0 2.00 50.8 4.24 107.9 4 1.00 26 3.24 82.5 2.374 60.32 0.250 6.3 R 18
2500
1.1/4 7.24 184 1.51 38.5 2.50 63.5 5.12 130.2 4 1.12 29 3.99 101.5 2.844 72.24 0.312 7.9 R 21
1.1/2 7.99 203 1.75 44.5 2.88 73.0 5.74 146 4 1.25 32 4.50 114.5 3.250 82.55 0.312 7.9 R 23
2 9.25 235 2.00 51.0 3.62 92.1 6.74 171.4 8 1.12 29 5.25 133.5 4.000 101.60 0.312 7.9 R 26
93
PACKING AND GASKET
Asbestos-free packing is composed by a series of rings of pure graphite. The sets is closed with two rings, top
and bottom, anti-extrusion, manufactured in braided graphite. Both internal and external rings are treaded with
corrosion inhibitor.
Asbestos-free gaskets used on bolted bonnet valves are of the spiral-wound type in Stainless Steel 316 and pure
graphite. On class 1500 valves, ring-joint gaskets in accordance with ANSI B16.20 - API 6A can be used.
Spare Parts: CALOBRI mantains an extensive inventory of packing and gaskets spares. To individuate the require
one please refer to the information shown on CALOBRI’s data sheets (assembly drawings), indicating code and
composition of the sets.
GARLOCK®
EVSP 9000 ARMA-SEAL 312 (TM)
FT
ISO TESTING TA-LUFT TESTING ISO 15848
DRA
CALOBRI testing pro- Valve cycle tester using a mass Valve cycle tester with vacuum TESTING
gramme and results are spectrometer in sniffer mode to collection tank directly connected Emission test with Temperature
available on request at measure helium leakage from the to the mass spectrometer and Pressure cycles combined.
www.calobri.com valve gland. Detection by mass spectrometer
in open ambient.
94
VALVE FLOW COEFFICIENT
FLOW COEFFICIENT C v
The Cv’s a valve property and is difined as follows: “The Flow Coefficient Cv states the flow capacity of a valve in
U.S. gallons per minute of water at a standard temperature of 60°F (15,6° C) that will flow through the valve with a
pressure loss of one pound per square inch at a specific opening position”. For the metric sistem the analog value is
Kv where measure unit are Bar, Kg and meters. The Cv show the quality and accuracy of a valve in terms of pressure
loss, the highest values of Cv indicate the highest quality of a valve.
Flow Coefficient Cv Kv
Cv 1 0,865
Kv 1.156 1
To measure the properly value of Cv there in not a standard method. CALOBRI R & D team has used two different
methods: 1-Using Cv definition, through the means of a specifically built test rig, it has been obtained 1Bar of pressure
loss and the flow has been verified with specific equipment. Calculation is possible to convert the measure to Cv. 2-In
the same machine the flow has been changed and different measure of pressure loss has been obtained: a table has
been defined and an average value per each valve has been calculated.
95
END CONNECTIONS
mm mm mm mm mm mm mm mm
-Fig. a 2”
-Fig. b > 2”
B = A - 2T
96
END CONNECTIONS
L2
L1
p L1
L1 L2
E0
E1 D
30° 30°
90° Flush by Hand
Tolerance on Product
E0 = D -- (0.050D + 1.1)p p = Pitch One turn large or small from Notch flush with face of fitting.
*E1 = E0 + 0.0625 L1 Depth of thread = 0.80p notch on plug gauge or face If chamfered, notch flush with
L 2 = (0.80D = 6.8)p Total Taper 3/4 -inch per Foot of ring gauge. bottom of chamfer.
/
1
8 0.4050 27.0 0.03704 0.36351 0.37360 0.1615 0.2639 0.02963
/4
1
0.5400 18.0 0.05556 0.47739 0.49163 0.2278 0.4018 0.04444
3
/8 0.6750 18.0 0.05556 0.61201 0.62701 0.2400 0.4078 0.04444
/2
1
0.8400 14.0 0.07143 0.75843 0.77843 0.3200 0.5337 0.05714
3
/4 1.0500 14.0 0.07143 0.96768 0.98887 0.3390 0.5457 0.05714
1 /4 1
1.6600 11.5 0.08696 1.55713 1.58338 0.4200 0.7068 0.06957
1 /41
32 42.54 1.674 17.5 0.688 83 3.267
1 /21
40 48.64 1.914 19 0.748 82 3.228
A = See relevant Product/Size/Class
table within this catalogue 2 50 61.11 2.405 22 0.866 79 3.110
Lont Pattern Total length 400 mm. S = See table Socket Weld
97
CONVERSION CHARTS
kg./cm2. lb./inch2. kg./cm2. lb./inch2. kg./cm2. lb./inch2. kg./cm2. lb./inch2. kg./cm2. lb./inch2.
98
CONVERSION CHARTS
1 inch = 25,4 mm
Inch
Inch. 0 1 2 3 4 5 6 7 8 9 10
10 11 12
12 13
13 14
14
0 0.000 25.400 50.800 76.200 101.60 127.00 152.40 177.80 203.20 228.60 254.00 279.40 304.80 330.20 355.60
1/64 0.397 25.797 51.197 76.597 102.00 127.40 152.80 178.20 203.60 229.00 254.40 279.80 305.20 330.60 356.00
1/32 0.794 26.194 51.594 76.994 102.39 127.79 153.19 178.59 203.99 229.39 254.79 280.19 305.59 330.99 356.39
3/64 1.191 26.591 51.991 77.391 102.79 128.19 153.59 178.99 204.39 229.79 255.19 280.59 305.99 331.39 356.79
1/16 1.587 26.987 52.387 77.787 103.19 128.59 153.99 179.39 204.79 230.19 255.59 280.99 306.39 331.79 357.19
5/64 1.984 27.384 52.784 78.184 103.58 128.98 154.38 179.78 205.18 230.58 255.98 281.38 306.78 332.18 357.58
3/32 2.381 27.781 53.181 78.581 103.98 129.38 154.78 180.18 205.58 230.98 256.38 281.78 307.18 332.58 357.98
7/64 2.778 28.178 53.578 78.978 104.38 129.78 155.18 180.58 205.98 231.38 256.78 282.18 307.58 332.98 358.38
1/8 3.175 28.575 53.975 79.375 104.77 130.17 155.57 180.97 206.37 231.77 257.17 282.57 309.97 333.37 358.77
9/64 3.572 28.972 54.372 79.772 105.17 130.57 155.97 181.37 206.77 232.17 257.57 282.97 308.37 333.77 359.17
5/32 3.969 29.369 54.769 80.169 105.57 130.97 156.37 181.77 207.17 232.57 257.97 283.37 308.77 334.17 359.57
11/64 4.366 29.766 55.166 80.566 105.97 131.37 156.77 182.17 207.57 232.97 258.37 283.77 309.17 334.57 359.97
3/16 4.762 30.162 55.562 80.962 106.38 131.76 157.16 182.56 207.96 233.36 258.76 285.16 309.56 334.96 360.38
13/64 5.159 30.559 55.959 81.359 106.76 132.16 157.56 182.96 208.36 233.76 259.16 284.56 309.96 335.36 360.76
7/32 5.556 30.956 56.356 81.756 107.16 132.56 157.96 183.36 208.76 234.16 259.56 284.96 310.36 335.76 361.16
15/64 5.953 31.353 56.753 82.153 107.55 132.95 158.35 183.75 209.15 234.55 259.95 285.35 310.75 336.15 361.55
1/4 6.350 31.750 57.150 82.550 107.95 133.35 158.75 184.15 209.55 234.95 260.35 285.75 311.15 336.55 361.95
17/64 6.747 32.147 57.547 82.947 108.35 133.75 159.15 184.55 209.95 235.35 260.75 286.15 311.55 336.95 362.35
9/32 7.144 32.544 57.944 83.344 108.74 134.14 159.54 184.94 210.34 235.74 261.14 286.54 311.94 337.34 362.74
19/64 7.541 32.941 58.341 83.741 109.14 134.54 159.94 185.34 210.74 236.14 261.54 286.94 312.34 337.74 363.14
5/16 7.937 33.337 58.737 84.137 109.54 134.94 160.34 185.74 211.14 236.54 261.94 287.34 312.74 338.14 363.54
21/64 8.334 33.734 59.134 84.534 109.93 135.33 160.73 186.13 211.53 236.93 262.33 287.73 313.13 338.53 363.93
11/32 8.731 34.131 59.531 84.931 110.33 135.73 161.13 186.53 211.93 237.33 262.73 288.13 313.53 338.93 364.33
23/64 9.128 34.528 59.928 85.328 110.73 136.13 161.53 186.93 212.33 237.73 263.13 288.53 313.93 339.33 364.73
3/8 9.525 34.925 60.325 85.725 111.12 136.52 161.92 187.32 212.72 238.12 263.52 288.92 314.32 339.72 365.12
25/64 9.922 35.322 60.722 86.122 111.52 136.92 162.32 187.72 213.12 238.52 263.92 289.32 314.72 340.12 365.52
13/32 10.319 35.719 61.119 86.519 111.92 137.32 162.72 188.12 213.52 238.92 264.32 289.72 315.12 340.52 365.92
27/64 10.716 36.116 61.516 86.916 112.32 137.72 163.12 188.52 213.92 239.32 264.72 290.12 315.52 340.92 366.32
7/16 11.112 36.512 61.912 87.312 112.71 138.11 163.51 188.91 214.31 239.71 265.11 290.51 315.91 341.31 366.71
29/64 11.509 36.909 62.309 87.709 113.11 138.51 163.91 189.31 214.71 240.11 265.51 290.91 316.31 341.71 367.11
15/32 11.906 37.306 62.706 88.106 113.51 138.91 164.31 189.71 215.11 250.41 265.91 291.31 316.71 342.11 367.51
31/64 12.303 37.703 63.103 88.503 113.90 139.30 164.70 190.10 215.50 240.90 266.30 291.70 317.10 342.50 367.90
1/2 12.700 38.100 63.500 88.900 114.30 139.70 165.10 190.50 215.90 241.30 266.70 292.10 317.50 342.90 368.30
33/64 13.097 38.497 63.897 89.297 114.70 140.10 165.50 190.90 216.30 241.70 267.10 292.50 317.90 343.30 368.70
17/32 13.494 38.894 64.294 89.694 115.09 140.49 165.89 191.29 216.69 242.09 267.49 292.89 318.29 343.69 369.09
35/64 13.891 39.291 64.691 90.091 115.49 140.89 166.29 191.69 217.09 242.49 267.89 293.29 318.69 344.09 369.49
9/16 14.287 39.687 65.087 90.487 115.89 141.29 166.69 192.09 217.49 242.89 268.29 293.69 319.09 344.49 369.89
37/64 14.684 40.084 65.484 90.884 116.28 141.68 167.08 192.48 217.88 243.28 268.68 294.08 319.48 344.88 370.28
19/32 15.081 40.481 65.881 91.281 116.68 142.08 167.48 192.88 218.28 243.68 269.08 294.48 319.88 345.28 370.68
39/64 15.478 40.878 66.278 91.678 117.08 142.48 167.88 193.28 218.68 244.08 269.48 294.88 320.28 345.68 371.08
5/8 15.875 41.275 66.675 92.075 117.47 142.87 168.27 193.67 219.07 244.47 269.87 295.27 320.67 346.07 371.47
41/64 16.272 41.672 67.072 92.472 117.87 143.27 168.67 194.07 219.47 244.87 270.27 295.67 321.07 346.47 371.87
21/32 16.669 42.069 67.469 92.869 118.27 143.67 169.07 194.47 219.87 245.27 270.67 296.07 321.47 346.87 372.27
43/64 17.066 42.466 67.866 93.266 118.67 144.07 169.47 194.87 220.27 245.67 271.07 296.47 321.87 347.27 372.67
11/16 17.462 42.862 68.262 93.662 119.06 144.46 169.86 195.26 220.66 246.06 271.46 296.86 322.26 347.66 373.06
45/64 17.859 43.259 68.659 94.059 119.46 144.86 170.26 195.66 221.06 246.46 271.86 297.26 322.66 348.06 373.46
23/32 18.256 43.656 69.056 94.456 119.86 145.26 170.66 196.06 221.46 246.86 272.26 297.66 323.06 348.46 373.86
47/64 18.635 44.053 69.453 94.853 120.25 145.65 171.05 196.45 221.85 247.25 272.65 298.05 323.45 348.85 374.25
3/4 19.050 44.450 69.850 95.250 120.65 146.05 171.45 196.85 222.25 247.65 273.05 298.45 232.85 349.25 374.65
49/64 19.447 44.487 70.247 95.647 121.05 146.45 171.85 197.25 222.65 248.05 273.45 298.85 234.25 349.65 375.05
25/32 19.844 45.244 70.644 96.044 121.44 146.84 172.24 197.64 223.04 248.44 273.84 299.24 234.64 350.04 375.44
51/64 20.241 45.641 71.041 96.441 121.84 147.24 172.64 198.04 223.44 248.84 274.24 299.64 235.04 350.44 375.84
13/16 20.637 46.037 71.437 96.837 122.24 147.64 173.04 198.44 223.84 249.24 274.64 300.04 325.44 350.84 376.24
53/64 21.034 46.434 71.834 97.234 122.63 148.03 173.43 198.83 224.23 249.63 275.03 300.43 325.83 351.23 376.63
27/32 21.431 46.831 72.231 97.631 123.03 148.43 173.83 199.23 224.63 250.03 275.43 300.83 326.23 351.63 377.03
55/64 21.828 47.228 72.628 98.028 123.43 148.83 174.23 199.63 225.03 250.43 275.83 301.23 326.63 352.03 377.43
7/8 22.225 47.625 73.025 98.425 123.82 149.22 174.62 200.02 225.42 250.82 276.22 301.62 327.02 352.42 377.82
57/64 22.622 48.022 73.422 98.822 124.22 149.62 175.02 200.42 225.82 251.22 276.62 302.02 327.42 352.82 378.22
29/32 23.019 48.419 73.819 99.219 124.62 150.02 175.42 200.82 226.22 251.62 277.02 302.42 327.82 353.22 378.62
59/64 23.416 48.816 74.216 99.616 125.02 150.42 175.82 201.22 226.62 252.02 277.42 302.82 328.22 353.62 379.02
15/16 23.812 49.212 74.612 100.010 125.41 150.81 176.21 201.61 227.01 252.41 277.81 303.21 328.61 354.01 379.41
61/64 24.209 49.609 75.009 100.410 125.81 151.21 176.61 202.01 227.41 252.81 278.21 303.61 329.01 354.41 379.81
31/32 24.606 50.006 75.406 100.810 126.21 151.61 177.01 202.41 227.81 253.21 278.61 304.01 329.41 354.81 380.21
63/64 25.003 50.403 75.803 101.200 126.60 152.00 177.40 202.80 228.20 253.60 279.00 304.40 329.80 355.20 380.63
99
CORROSION DATAS
304
316
304
316
304
316
Steel304
Steel316
Steel304
Steel316
Steel304
Steel316
StainlessSteel
StainlessSteel
StainlessSteel
StainlessSteel
StainlessSteel
StainlessSteel
Steel
Steel
Steel
Carbon Steel
Carbon Steel
Carbon Steel
Stainless
Stainless
Stainless
Stainless
Stainless
Stainless
Inconel
Inconel
Inconel
Carbon
Carbon
Carbon
Inconel
Inconel
Inconel
Monel
Monel
Monel
CORROSIVE
CORROSIVE MEDIA CORROSIVE
CORROSIVE MEDIA CORROSIVE
CORROSIVE MEDIA
Monel
Monel
Monel
MEDIA MEDIA MEDIA
A = Substantial resistance - Preferred material of construction. CALOBRI doesn't assume any responsibility from the use of a.m. data which are purely
B = Moderate resistance - Satisfactory for use under most conditions. theoretical. The user must verify the best conditions of use.
C = Questionable resistance - Use with caution.
D = Inadequate resistance - Not recommended.
100
NOTE
101
VALVE DATA CAST STEEL
ATE, G
GATE LOBE, SWING CHECK VALVES
VALVES
GATE VALVES
03
04
Gear version TEST PRESSURE TO API 598 Psi/bar
01
Shell (water) Seat (water) Seat (air)
450/30 314/22 80/5.5
L - BW
L - RF
BW Welded-End version
CLASS 150 Lb
TRIM NUMBER AS PER API 600
No Part Name 1 2 8 5 9 10 12 16
03 Seat Ring STL Gr6 STL Gr6 STL Gr6 STL Gr6
04 Wedge 410 STL Gr6 STL Gr6
05 Stem
410 304 MONEL 316
09 Backseat 316
410 410 316
Lantern Ring
13 Gland
This document is the property of Calobri. It must not be stored, reproduced or disclosed to others without written authorisation from the Company.
104
GATE VALVES
CLASS 150 Lb
SIZE DIMENSION IN mm WEIGHT
Inches mm L(RF) L(BW) H Open H1 ØD Ø Da Kg (HANDWHEEL) Kg (GEAR OPERATOR)
2” 50 178 216 390 - 200 - 19 -
2-12” 65 190 241 520 - 250 - 24 -
3” 80 203 282 530 - 250 - 33 -
4” 100 229 305 605 - 350 - 49 -
6” 150 267 403 780 - 350 305 87 -
8” 200 292 419 960 - 350 305 132 -
10” 250 330 457 1210 - 450 305 203 -
12” 300 356 502 1415 1465 500 305 265 291
14” 350 381 572 1532 1600 600 305 490 516
16” 400 406 610 1765 1820 600 460 535 561
18” 450 432 660 1965 2015 600 460 640 689
20” 500 457 711 2130 2180 600 460 780 830
22” 550 508 762 2385 2450 700 460 990 1040
24” 600 508 813
CLASS
2565
800
2630 700 460 1190 1240
This document is the property of Calobri. It must not be stored, reproduced or disclosed to others without written authorisation from the Company.
105
GATE VALVES
22
Face to Face - Bolted Bonnet with bolted yoke from Ø 10”
17
Dimension ANSI B16.10 - Welded Seat Ring
16
15
13
12 From 26” MSS SP44
11*
ANSI B16.47 API 605 - Flexible Wedge from Ø 3” and greater
10*
07
08* Testing API 598
05 06
to Customer’s requirement
H1
03 04
01
BW Welded-End version
CLASS 300 Lb
TRIM NUMBER AS PER API 600
No Part Name 1 2 8 5 9 10 12 16
03 Seat Ring STL Gr6 STL Gr6 STL Gr6 STL Gr6
04 Wedge 410 STL Gr6 STL Gr6
05 Stem
410 304 MONEL 316
09 Backseat 316
410 410 316
Lantern Ring
13 Gland
106
GATE VALVES
CLASS 300 Lb
SIZE DIMENSION IN mm WEIGHT
Inches mm L(RF) L(BW) H Open H1 ØD Ø Da Kg (HANDWHEEL) Kg (GEAR OPERATOR)
2” 50 216 216 410 - 200 - 24 -
2-12” 65 241 241 470 - 200 - 41 -
3” 80 282 282 536 - 250 - 54 -
4” 100 305 305 630 - 300 - 77 -
6” 150 403 403 810 860 350 240 143 161
8” 200 419 419 1010 1060 450 240 220 238
10” 250 457 457 1245 1300 500 310 370 396
12” 300 502 502 1460 1510 600 310 505 531
14” 350 762 762 1630 1670 600 310 765 791
16” 400 838 838 1800 1860 600 460 1010 1059
18” 450 914 914 2000 2050 600 460 1300 1349
20” 500 991 991 2200 2260 720 600 1700 1749
22” 550 1118 1118 2460 2510 900 600 2100 2198
24” 600 1143 1143
CLASS
2640
800
2690 900 600 2420 2518
For Face-to-Face dimension L (RTJ), add +16 mm from size 2” up to 18” add +19 mm for size 20”, add +22 mm for sizes 22” and 24”
This document is the property of Calobri. It must not be stored, reproduced or disclosed to others without written authorisation from the Company.
107
GATE VALVES
14 15
Flanges Up to 24” ANSI B16.5 - Solid wedge up to Ø 2-1/2”
12 13
From 26” MSS SP44
10* 11*
ANSI B16.47 API 605 - Flexible Wedge from Ø 3” and greater
02 09
01
ØDa
H1
CLASS 600 Lb
TRIM NUMBER AS PER API 600
No Part Name 1 2 8 5 9 10 12 16
03 Seat Ring STL Gr6 STL Gr6 STL Gr6 STL Gr6
04 Wedge 410 STL Gr6 STL Gr6
05 Stem
410 304 MONEL 316
09 Backseat 316
410 410 316
Lantern Ring
13 Gland
This document is the property of Calobri. It must not be stored, reproduced or disclosed to others without written authorisation from the Company.
108
GATE VALVES
CLASS 600 Lb
SIZE DIMENSION IN mm WEIGHT
Inches mm L(RF) L(BW) H Open H1 ØD Ø Da Kg (HANDWHEEL) Kg (GEAR OPERATOR)
2” 50 292 292 425 - 200 - 33 -
2-12” 65 330 330 500 - 200 - 51 -
3” 80 356 356 570 - 250 - 70 -
4” 100 432 432 680 - 300 - 127 -
6” 150 559 559 895 940 500 500 280 306
8” 200 660 660 1085 1150 600 600 450 476
10” 250 787 787 1280 1310 600 600 760 809
12” 300 838 838 1500 1550 600 600 980 1029
14” 350 889 889 1660 1670 720 600 1240 1289
16” 400 991 991 1885 1940 720 800 1540 1638
18” 450 1092 1092 2040 2090 800 800 2250 2348
20” 500 1194 1194 2230 2280 1000 800 2700 2990
22” 550 1295 1295 2415 2470 1000 800 3200 3490
24” 600 1397 1397
CLASS
2640
800
2690 1000 800 3800 4090
For Face-to-Face dimension L (RTJ), add +3 mm from size 2” up to 18” add +6 mm for size 20”, add +10 mm for sizes 22” and 24”
This document is the property of Calobri. It must not be stored, reproduced or disclosed to others without written authorisation from the Company.
109
GLOBE VALVES
18
Dimension ANSI B16.10 - Screwed Seat Ring up to Ø 6”
16
17 Flanges Up to 24” ANSI B16.5 - Welded Seat Ring from Ø 8”
14 15
From 26” MSS SP44
- Swivel Plug Disc Standard Type
H (Closed)
12
ØDa
13
ANSI B16.47 API 605
10* 11*
Butt-weld ends ANSI B16.25 - Available with Gear Operator
H1
02 07
06 09
Testing API 598 - Special features according
05 08*
to Customer’s requirement
22 04
03
01
Gear version
TEST PRESSURE TO API 598 Psi/bar
L - RF Shell (water) Seat (water) Seat (air)
450/30 314/22 80/5.5
L - BW
BW Welded-End version
CLASS 150 Lb
TRIM NUMBER AS PER API 600
No Part Name 1 2 8 5 9 10 12 16
03 Seat Ring STL Gr6 STL Gr6 STL Gr6 STL Gr6
04 Disc 410 STL Gr6 STL Gr6
05 Stem
09 Backseat 410 304 MONEL 316
316
Lantern Ring 410 410 316
13 Gland
22 Disc Nut
This document is the property of Calobri. It must not be stored, reproduced or disclosed to others without written authorisation from the Company.
110
GLOBE VALVES
CLASS 150 Lb
SIZE DIMENSION IN mm WEIGHT
Inches mm L(RF) L(BW) H Closed H1 ØD Ø Da Kg (HANDWHEEL) Kg (GEAR OPERATOR)
2” 50 203 203 380 - 200 - 22 -
2-12” 65 216 216 415 - 245 - 30 -
3” 80 241 241 390 - 285 - 40 -
4” 100 292 292 470 - 285 - 60 -
6” 150 406 406 540 - 400 - 105 -
8” 200 495 495 605 - 600 - 170 -
10” 250 622 622 860 900 600 305 315 341
12” 300 698 698 935 975 600 460 475 525
14” 350 787 787 1070 1090 700 460 580 630
16” 400 914 914 1150 1160 1000 610 790 890
18” 450 978 978 1205 1275 1000 610 1020 1120
20” 500 978 978 - 1420 - 610 1250 1540
22” 550 1067 1067 - 1570 - 610 -
24” 600 1295 1295
CLASS
-
800
1720 - 610 1960 2260
This document is the property of Calobri. It must not be stored, reproduced or disclosed to others without written authorisation from the Company.
111
GLOBE VALVES
18
Dimension ANSI B16.10 - Screwed Seat Ring up to Ø 6”
16
17 Flanges Up to 24” ANSI B16.5 - Welded Seat Ring from Ø 8”
14 15
From 26” MSS SP44
- Swivel Plug Disc Standard Type
H (Closed)
12
ØDa
13
ANSI B16.47 API 605
10* 11*
Butt-weld ends ANSI B16.25 - Available with Gear Operator
H1
02 07
06 09
Testing API 598 - Special features according
05 08*
to Customer’s requirement
22 04
03
01
Gear version
TEST PRESSURE TO API 598 Psi/bar
L - RF Shell (water) Seat (water) Seat (air)
1125/78 825/57 80/5.5
L - BW
BW Welded-End version
CLASS 300 Lb
TRIM NUMBER AS PER API 600
No Part Name 1 2 8 5 9 10 12 16
03 Seat Ring STL Gr6 STL Gr6 STL Gr6 STL Gr6
04 Disc 410 STL Gr6 STL Gr6
05 Stem
09 Backseat 410 304 MONEL 316
316
Lantern Ring 410 410 316
13 Gland
22 Disc Nut
112
GLOBE VALVES
CLASS 300 Lb
SIZE DIMENSION IN mm WEIGHT
Inches mm L(RF) L(BW) H Closed H1 ØD Ø Da Kg (HANDWHEEL) Kg (GEAR OPERATOR)
2” 50 267 267 385 - 200 - 28 -
2-12” 65 292 292 460 - 245 - 40 -
3” 80 318 318 430 - 285 - 54 -
4” 100 356 356 495 - 285 - 75 -
6” 150 444 444 590 635 450 305 155 181
8” 200 559 559 800 845 600 460 310 359
10” 250 622 622 915 960 700 610 485 583
12” 300 711 711 1040 975 700 610 690 788
14” 350 - - - - - - - -
16” 400 - - - - - - - -
18” 450 - - - - - - - -
20” 500 - - - - - - - -
22” 550 - - - - - - - -
24” 600 - -
CLASS
-
800
- - - - -
This document is the property of Calobri. It must not be stored, reproduced or disclosed to others without written authorisation from the Company.
113
GLOBE VALVES
ØD
BASIC DESIGN STANDARDS STANDARD DESCRIPTION
21 Basic Design BS 1873 - Outside Screw & Yoke – Rising Stem
20
19
ANSI B16.34 - Rising Hand Wheel
18 Face to Face - Bolted Bonnet Joint
16
17
Dimension ANSI B16.10 - Screwed Seat Ring up to Ø 6”
14 15
12
13 - Welded Seat Ring from Ø 8”
10*
From 26” MSS SP44
11*
Gear version
L - RF
TEST PRESSURE TO API 598 Psi/bar
ØP
ØN
CLASS 600 Lb
TRIM NUMBER AS PER API 600
No Part Name 1 2 8 5 9 10 12 16
03 Seat Ring STL Gr6 STL Gr6 STL Gr6 STL Gr6
04 Disc 410 STL Gr6 STL Gr6
05 Stem
09 Backseat 410 304 MONEL 316
316
Lantern Ring 410 410 316
13 Gland
22 Disc Nut
114
GLOBE VALVES
CLASS 600 Lb
SIZE DIMENSION IN mm WEIGHT
Inches mm L(RF) L(BW) H Closed H1 ØD Ø Da Kg (HANDWHEEL) Kg (GEAR OPERATOR)
2” 50 292 445 - 250 - 45 -
2-12” 65 330 - - - - 52 -
3” 80 356 540 - 320 - 77 -
4” 100 432 645 - 450 305 125 151
6” 150 559 808 - 600 460 327 376
8” 200 660 945 990 700 610 496 594
10” 250 787 1050 1100 700 610 720 1010
12” 300 838 1215 1218 1000 610 1070 1360
14” 350 889 - 1430 1295 1000 - 1750 -
16” 400 991 - - 1435 - 800 2260 2725
18” 450 1092 - - 1570 - 800 2900 3365
20” 500 1194 - - 170 - 800 3500 3965
22” 550 1295 - - 1845 - 800 - -
24” 600 1397 -
CLASS
-
800
2005 - 800 4600 5065
For Face-to-Face dimension L (RTJ), add +3 mm from size 2” up to 18” add + 6 mm for size 20”, add + 10 mm for sizes 22” and 24”
This document is the property of Calobri. It must not be stored, reproduced or disclosed to others without written authorisation from the Company.
115
SWING CHECK
13
14
15 BASIC DESIGN STANDARDS STANDARD DESCRIPTION
12
11*
Basic Design API 6D - Full Opening
ANSI B16.34 - Flow direction is stamped on body
Face to Face
H
08
- Bolted Cover Joint
Dimension ANSI B16.10 - Welded Seat Ring
07 Flanges Up to 24” ANSI B16.5 - Lifting Eyebolt from 30 Kg and heavier
05 From 26” MSS SP44
06 ANSI B16.47 API 605 - Special features according
04 to Customer’s requirement
Butt-weld ends ANSI B16.25
03 - Available accessories:
02 Testing API 598/ API 6D
- Outside lever with counter weight
01
- Shock absorber (pneumatic cylinder)
L - RF - Limit switch
CLASS 150 Lb
TRIM NUMBER AS PER API 600
No Part Name 1 2 8 5 9 10 12 16
02 Seat Ring STL Gr6 STL Gr6 STL Gr6 STL Gr6
03 Disc 410 STL Gr6 STL Gr6
04 Washer
05 Disc Nut 410 304 MONEL 316
316
06 Pin 410 410 316
08 Disc Pin
10 Plug
This document is the property of Calobri. It must not be stored, reproduced or disclosed to others without written authorisation from the Company.
116
SWING CHECK
CLASS 150 Lb
SIZE DIMENSION IN mm WEIGHT
Inches mm L(RF) L(BW) H Kg
2” 50 203 203 150 19
3” 80 241 241 175 29
4” 100 292 292 210 49
6” 150 356 356 315 77
8” 200 495 495 365 140
10” 250 622 622 445 207
12” 300 698 698 520 330
14” 350 787 787 600 410
16” 400 864 864 615 600
18” 450 978 978 655 680
20” 500 978 978 670 750
22” 550 1067 1067 725
24” 600 1295 1295 765 1280
CLASS 800
This document is the property of Calobri. It must not be stored, reproduced or disclosed to others without written authorisation from the Company.
117
SWING CHECK
13
14
15 BASIC DESIGN STANDARDS STANDARD DESCRIPTION
12
11*
Basic Design API 6D - Full Opening
ANSI B16.34 - Flow direction is stamped on body
Face to Face
H
08
- Bolted Cover Joint
Dimension ANSI B16.10 - Welded Seat Ring
07 Flanges Up to 24” ANSI B16.5 - Lifting Eyebolt from 30 Kg and heavier
05 From 26” MSS SP44
06 ANSI B16.47 API 605 - Special features according
04 to Customer’s requirement
Butt-weld ends ANSI B16.25
03 - Available accessories:
02 Testing API 598/ API 6D
- Outside lever with counter weight
01
- Shock absorber (pneumatic cylinder)
L - RF - Limit switch
CLASS 300 Lb
TRIM NUMBER AS PER API 600
No Part Name 1 2 8 5 9 10 12 16
02 Seat Ring STL Gr6 STL Gr6 STL Gr6 STL Gr6
03 Disc 410 STL Gr6 STL Gr6
04 Washer
05 Disc Nut 410 304 MONEL 316
316
06 Pin 410 410 316
08 Disc Pin
10 Plug
This document is the property of Calobri. It must not be stored, reproduced or disclosed to others without written authorisation from the Company.
118
SWING CHECK
CLASS 300 Lb
SIZE DIMENSION IN mm WEIGHT
Inches mm L(RF) L(BW) H Kg
2” 50 267 267 180 24
3” 80 318 318 230 45
4” 100 356 356 270 75
6” 150 444 444 330 124
8” 200 533 533 410 190
10” 250 622 622 460 325
12” 300 711 711 550 475
14” 350 838 838 610 690
16” 400 864 864 670 900
18” 450 978 978 700 1100
20” 500 1016 1016 725 1330
22” 550 1118 1118 825 -
24” 600 1346 1346 1080 1950
CLASS 800
For Face-to-Face dimension L (RTJ), add +16 mm from size 2” up to 18” add +19 mm for size 20”, add +22 mm for sizes 22” and 24”
This document is the property of Calobri. It must not be stored, reproduced or disclosed to others without written authorisation from the Company.
119
SWING CHECK
13
14
15 BASIC DESIGN STANDARDS STANDARD DESCRIPTION
12
L - RF
- Limit switch
L - RTJ
RTJ Flanged-End version
CLASS 600 Lb
TRIM NUMBER AS PER API 600
No Part Name 1 2 8 5 9 10 12 16
02 Seat Ring STL Gr6 STL Gr6 STL Gr6 STL Gr6
03 Disc 410 STL Gr6 STL Gr6
04 Washer
05 Disc Nut 410 304 MONEL 316
316
06 Pin 410 410 316
08 Disc Pin
10 Plug
This document is the property of Calobri. It must not be stored, reproduced or disclosed to others without written authorisation from the Company.
120
SWING CHECK
CLASS 600 Lb
SIZE DIMENSION IN mm WEIGHT
Inches mm L(RF) L(BW) H Kg
2” 50 292 292 230 40
3” 80 356 356 270 60
4” 100 432 432 310 103
6” 150 559 559 400 230
8” 200 660 660 460 355
10” 250 787 787 580 627
12” 300 838 838 620 790
14” 350 889 889 660 820
16” 400 991 991 710 1400
18” 450 1092 1092 765 1800
20” 500 1194 1194 885 2300
22” 550 1295 1295 - -
24” 600 1397 1397 1020 3330
CLASS 800
For Face-to-Face dimension L (RTJ), add +3 mm from size 2” up to 18” add +6 mm for size 20”, add +10 mm for sizes 22” and 24”
This document is the property of Calobri. It must not be stored, reproduced or disclosed to others without written authorisation from the Company.
121
122
TECHNICAL DATA
85
MATERIALS
VALVE BODY AND BONNET MATERIAL - COMPARISON TABLE
Temperature up to:
Alloy Steel Alloy Steel 2-1/4 Cr – 1 Mo A217 WC9 A182 F22 1100°F (593°C)
Nickel - Iron Alloy Incoloy 802 35Ni-35Fe-20Cr-Cb A351 CT15C B462 N08020 800°F (427°C)
Nickel - Molybdenum Hastelloy B 62Ni-28Mo-5Fe A494 N- 12MV B335 N10001 800°F (427°C)
Nickel Superalloy Inconel 625 60Ni-22Cr-9Mo-305Cb A494 - CW-6MC B564 N06625 1200°F (649°C)
CALOBRI Valves are manufactured in a wide range of materials, supplied by the best available steel mill. All the material can be
certified in the chemical composition and the mechanical characteristic.
This document is the property of Calobri. It must not be stored, reproduced or disclosed to others without written authorisation from the Company.
124
MATERIALS
The following tables shown main Standard combination of Body and Bonnet or Cover materials and Trim (stem, disc or wedge, seat, gland)
composition. Different combinations are available upon request.
Trim Nr. Seat Ring Wedge / Disc Stem & Backseat Gland
Reference Title
Petroleum and natural gas industries - Materials for use in H2Scontaining environments in oil
NACE MR01-75 / ISO 15156 and gas production
MSS SP 25 Standard Marking System for Valves, Fittings, Flanges and Unions
MSS SP 45 By-pass and Drain Connections
Quality Standards for Steel Castings for Valves, Flanges, and Fittings and Other Piping
MSS SP 54 Components – Radiographic Examination Method
Quality Standards for Steel Castings for Valves, Flanges, and Fittings and Other Piping
MSS SP 55 Components - Visual Inspection
Martensitic Stainless Steel and Alloy Steel Castings for Pressure Containing Parts Suitable for
ASTM A 217 High Temperature Service
Steel Globe and Globe Stop and check Valves ( Flanged and buut welding ends for the
BS 1873 Petroleum )
Note: These charts are for reference only. CALOBRI recommends Customer Engineers to analyse service requirements and specify the
materials they consider optimum. CALOBRI can not be held liable for any damage occurred due to the use of the table.
This document is the property of Calobri. It must not be stored, reproduced or disclosed to others without written authorisation from the Company.
125
FACING DIMENSION - RAISED FACE
ØE F
ØC B
1,6
ØD
ØA
(1) The regular 1/16 inch (1,6 mm) raised face 150 and 300 lb flanges is not included in the minimum flange thickness given above.
* For integral Valve flange of Class 150, the dimension “B” became 15,8 for Ø 2” and 19,1 for Ø 3”.
This document is the property of Calobri. It must not be stored, reproduced or disclosed to others without written authorisation from the Company.
126
FACING DIMENSION - RAISED FACE
ØE F
B
ØC
6,4
ØD
ØA
The regular 1/4 inch (6,4 mm) raised face of 600 and 900 Lbs flanges is not included in the minimum flange thickness given above.
This document is the property of Calobri. It must not be stored, reproduced or disclosed to others without written authorisation from the Company.
127
FACING DIMENSION - RING JOINT
TOLERANCES
ØG
Dim. E = + 0,40
ØP
Q
23° Dim. F = ± 0,20
Dim. P = ± 0,150
F
Dim. Q = + 0,40
E
E
23° = ± 1/2°
R ≤ 1,6 + 0,8
R
R > 1,6 ± 0,8
This document is the property of Calobri. It must not be stored, reproduced or disclosed to others without written authorisation from the Company.
128
NOTE
129
NOTE
130
BALL VALVES
TRUNNION REDUCED BORE
CLASS 1500-2500 REDUCED BORE - TRUNNION MOUNTED SIDE ENTRY BALL VALVES
Integral Flanges - End to End According to API 6D Flange dimensions to ANSI B16.5
DN 40X25 50X40 80X50 100X80 150X100 200X150 250X200 300X250 350x300 400x350
REDUCED BORE
IN 11/2”x1 2”x1.1/2” 3”x2” 4”x3” 6”x4” 8”x6” 10”x8” 12”x10” 14”x12” 16”x14”
mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in.
BSE Class 1500 A - - 368 14.48 470 18.50 546 21.49 705 27.75 832 32.75 991 39.01 1130 44.48 1257 49.5 1384 54.5
BSE Class 2500 A 384 15.11 451 17.75 578 22.75 673 26.49 914 35.98 - - - - - - - - - -
Center Class 1500 B - - 190 7.48 205 8.07 210 8.26 245 9.64 335 13.18 410 16.14 465 18.30 553 21.77 626 24.64
to Top Class 2500 B 185 7.28 200 7.87 215 8.46 220 8.66 255 10.03 - - - - - - - - - -
Center Class 1500 C - - 110 4.33 120 4.72 125 4.92 160 6.29 255 10.03 290 11.41 335 13.18 438 17.24 498 19.6
to Bottom Class 2500 C 105 4.13 120 4.72 130 5.11 135 5.31 170 6.69 - - - - - - - - - -
WITH LEVER WITH GEAR
132
TRUNNION FULL BORE
CLASS 150-300-600-900 FULL BORE - TRUNNION MOUNTED SIDE ENTRY BALL VALVES
Integral flanges - End to End According to API 6D Flange Dimensions to ANSI B16.5
DN 50 80 100 150 200 250 300 350 400 450 500 600
FULL BORE
IN 2” 3” 4” 6” 8” 10” 12” 14” 16” 18” 20” 24”
mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in.
BSE Class 150 A 178 7.00 203 7.99 229 9.01 394 15.51 457 17.99 533 20.98 610 24.0 686 27.00 762 30.00 864 34.01 914 36.56 1067 42.00
BSE Class 300 A 216 8.50 283 11.14 305 12.00 403 15.86 502 19.76 568 22.36 648 25.51 762 30.00 838 32.99 914 35.98 991 39.01 1143 45.00
BSE Class 600 A 292 11.49 356 14.01 432 17.00 559 22.00 660 25.98 787 30.98 838 32.99 889 35.00 991 39.01 1092 42.99 1194 47.00 1397 55.00
BSE Class 900 A 369 14.52 381 15.00 458 18.03 610 24.01 737 29.01 839 33.03 966 38.03 1029 40.51 1131 44.52 1220 48.03 13.21 52.00 1549 61.96
Class 150 B 140 5.51 190 7.48 247 9.72 295 11.61 330 12.99 400 15.74 460 18.11 480 18.89 540 21.25 580 22.83 715 28.14 780 30.70
Center Class 300 B 200 7.87 240 9.44 247 9.72 295 11.61 330 12.99 420 16.53 465 18.30 545 21.45 600 23.62 620 24.40 734 28.89 780 30.70
to Top Class 600 B 195 7.67 240 9.44 280 11.02 305 12.00 400 15.74 435 17.12 440 17.32 505 19.88 590 23.22 700 27.55 775 30.51 840 33.07
Class 900 B 200 7.87 240 9.44 280 11.02 350 13.77 390 15.35 480 18.89 438 17.24 545 21.45 650 25.59 675 26.57 790 31.10 915 36.02
Class 150 C 90 3.54 105 4.13 141 5.55 175 6.88 210 8.26 250 9.84 310 12.20 340 13.38 385 15.15 428 16.85 545 21.45 655 25.78
Center to Class 300 C 120 4.72 130 5.11 141 5.55 175 6.88 210 8.26 270 10.62 325 12.79 430 16.92 470 18.50 510 20.07 500 19.68 600 23.62
Bottom Class 600 C 110 4.33 110 4.33 175 6.88 195 7.67 280 11.02 285 11.22 320 12.59 340 13.38 410 16.14 445 17.51 510 20.07 640 25.19
Class 900 C 120 4.72 130 5.11 175 6.88 220 8.66 260 10.23 310 14.20 410 16.14 370 14.56 420 16.53 617 24.29 725 28.54 831 32.71
WITH LEVER WITH GEAR
133
TOP ENTRY BALL VALVES
CLASS 150-300-600-900-1500 FULL BORE - TRUNNION MOUNTED - TOP ENTRY BALL VALVES
Integral flanges - End to End According to API 6D Flange Dimensions to ANSI B16.5
DN 50 80 100 150 200 250 300 350 400 450 500 600
FULL BORE
IN 2” 3” 4” 6” 8” 10” 12” 14” 16” 18” 20” 24”
mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in.
BTE Class 150 A 178 7.00 203 7.99 229 9.01 394 15.51 457 17.99 533 20.98 610 24.0 686 27.00 762 30.00 864 34.01 914 36.56 1067 42.00
BTE Class 300 cat. F1-CT-600 A 216 8.50 283 11.14 305 12.00 403 15.86 502 19.76 568 22.36 648 25.51 762 30.00 838 32.99 914 35.98 991 39.01 1143 45.00
BTE Class 600 A 292 11.49 356 14.01 432 17.00 559 22.00 660 25.98 787 30.98 838 32.99 889 35.00 991 39.01 1092 42.99 1194 47.00 1397 55.00
BTE Class 900 A 369 14.52 381 15.00 458 18.03 610 24.01 737 29.01 839 33.03 966 38.03 1029 40.51 1131 44.52 1220 48.03 13.21 52.00 1549 61.96
BTE Class 1500 A 368 14.48 470 18.50 546 21.49 705 27.75 832 32.75 991 39 1131 44.5 1257 49.48 1384 54.5 - - - - - -
Class 150 B 140 5.51 190 7.48 280 11.02 295 11.61 330 12.99 400 15.74 460 18.11 480 18.89 540 21.25 580 22.83 715M28.14E N780T 30.70
Class 300 B 200 7.87 240 9.44 280 11.02 295 11.61 330 12.99 420 16.53 465 18.30 545 21.45 600 23.62 620LO PE
24.40 734 28.89 780 30.70
Center V E
Class 600 B 195 7.67 240 9.44 280 11.02 305 12.00 400 15.74 435 17.12 440 17.32 505 19.88 590E23.22 700 27.55 775 30.51 840 33.07
D
to Top R
DE21.45
Class 900 B 200 7.87 240 9.44 280 11.02 350 13.77 390 15.35 480 18.89 438 U N545
17.24 650 25.59 675 26.57 790 31.10 915 36.02
Class 1500 B 205 8.07 210 8.26 245 9.64 335 13.18 437 17.2 502 19.76 533 20.98 626 24.64 725 28.54 - - - - - -
Class 150 C 90 3.54 105 4.13 166 6.53 175 6.88 210 8.26 250 9.84 310 12.20 340 13.38 385 15.15 428 16.85 545 21.45 655 25.78
Class 300 C 120 4.72 130 5.11 150 5.90 175 6.88 210 8.26 270 10.62 325 12.79 430 16.92 470 18.50 510 20.07 500 19.68 600 23.62
Center to
Class 600 C 110 4.33 110 4.33 175 6.88 195 7.67 280 11.02 285 11.22 320 12.59 340 13.38 410 16.14 445 17.51 510 20.07 640 25.19
Bottom
Class 900 C 120 4.72 130 5.11 175 6.88 220 8.66 260 10.23 310 14.20 410 16.14 370 14.56 420 16.53 617 24.29 725 28.54 831 32.71
Class 1500 C 120 4.72 125 4.92 160 6.29 255 10.03 340 13.38 381 15 438 17.24 498 19.6 460 18.11 - - - - - -
CLASS 150-300-600-900-1500 REDUCED BORE - TRUNNION MOUNTED - TOP ENTRY BALL VALVES
Integral flanges - End to End According to API 6D Flange Dimensions to ANSI B16.5
DN 50x40 80x50 100x80 150x100 200x150 250x200 300x250 350x300 400x350 450x400 500x450 600x550
FULL BORE
IN 2”x11/2” 3”x2” 4”x3” 6”x4” 8”x6” 10”x8” 12”x10” 14”x12” 16”x14” 18”x16” 20”x18” 24”x20”
mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in.
BTE Class 150 A 178 7.00 203 7.99 229 9.01 394 15.51 457 17.99 533 20.98 610 24.0 686 27.00 762 30.00 864 34.01 914 36.56 1067 42.00
BTE Class 300 cat. F1-CT-600 A 216 8.50 283 11.14 305 12.00 403 15.86 502 19.76 568 22.36 648 25.51 762 30.00 838 32.99 914 35.98 991 39.01 1143 45.00
BTE Class 600 A 292 11.49 356 14.01 432 17.00 559 22.00 660 25.98 787 30.98 838 32.99 889 35.00 991 39.01 1092 42.99 1194 47.00 1397 55.00
BTE Class 900 A 369 14.52 381 15.00 458 18.03 610 24.01 737 29.01 839 33.03 966 38.03 1029 40.51 1131 44.52 1220 48.03 13.21 52.00 1549 61.96
BTE Class 1500 A 368 14.48 470 18.50 546 21.49 705 27.75 832 32.75 991 39.01 1131 44.5 1257 49.48 1384 54.5 - - - - - -
Class 150 B 209 8.22 140 5.51 190 7.48 280 11.02 295 11.61 330 12.99 400 15.74 460 18.11 480 18.89 540 21.25 580 22.84 715 28.14
EN T
Class 300 B 209 8.22 200 7.87 240 9.44 280 11.02 295 11.61 330 12.99 420 465 18.30 545 21.45 600 23.62 620E24.40
Center
16.53
L P M 734 28.89
O700
Class 600 B 209 8.22 195 7.67 240 9.44 280 11.02 305 12.00 400 15.74 435 17.12 440 17.32 505 19.88E590 E
23.22 27.55 775 30.51
to Top
Class 900 B E D V
R21.45
215 8.46 200 7.87 240 9.44 280 11.02 350 13.77 390 15.35 480 18.89 438 17.24D545 650 25.59 675 26.57 790 31.10
Class 1500 B 220 8.66 205 8.07 210 8.26 245 9.64 335 13.18 437 17.2 502 19.76
UN
533 20.98 626 24.64 - - - -
- -
Class 150 C 70 2.75 90 3.54 105 4.13 166 6.53 175 6.88 210 8.26 250 9.84 310 12.20 340 13.38 385 15.15 428 16.85 545 21.45
Class 300 C 70 2.75 120 4.72 130 5.11 150 5.90 175 6.88 210 8.26 270 10.62 325 12.79 430 16.92 470 18.50 510 20.07 500 19.68
Center to
Class 600 C 70 2.75 110 4.33 110 4.33 175 6.88 195 7.67 280 11.02 285 11.22 320 12.59 340 13.38 410 16.14 445 17.51 510 20.07
Bottom
Class 900 C 80 3.14 120 4.72 130 5.11 175 6.88 220 8.66 260 10.23 310 14.20 410 16.14 370 14.56 420 16.53 617 24.29 725 28.54
Class 1500 C 90 3.54 120 4.72 125 4.92 160 6.29 255 10.03 340 13.38 381 15.01 438 17.24 498 19.6 - - - - - -
134
FULL WELDED BALL VALVES
CLASS 150-300-600 FULL BORE - TRUNNION MOUNTED - FULL WELDED BALL VALVES
Integral flanges - End to End According to API 6D Flange Dimensions to ANSI B16.5
DN 50 80 100 150 200 250 300 350 400 450 500 600
FULL BORE
IN 2” 3” 4” 6” 8” 10” 12” 14” 16” 18” 20” 24”
mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in.
WSE Class 150 A 178 7.00 203 7.99 229 9.01 394 15.51 457 17.99 533 20.98 610 24.0 686 27.00 762 30.00 864 34.01 914 36.56 1067 42.00
WSE Class 300 cat. F1-CT-600 A 216 8.50 283 11.14 305 12.00 403 15.86 502 19.76 568 22.36 648 25.51 762 30.00 838 32.99 914 35.98 991 39.01 1143 45.00
WSE Class 600 A 292 11.49 356 14.01 432 17.00 559 22.00 660 25.98 787 30.98 838 32.99 889 35.00 991 39.01 1092 42.99 1194 47.00 1397 55.00
Class 150 B 140 5.51 190 7.48 280 11.02 295 11.61 330 12.99 400 15.74 460 18.11 480 18.89 540 21.25 580 22.83 E715M EN780T30.70
28.14
Center O P
to Top
Class 300 B 200 7.87 240 9.44 280 11.02 295 11.61 330 12.99 420 16.53 465 VE620L 24.40 734 28.89 780 30.70
18.30 545 21.45 600 23.62
D E
Class 600 B 195 7.67 240 9.44 280 11.02 305 12.00 400 15.74 435 17.12 440 17.32 505 E R
19.88
D 13.38 590 23.22 700 27.55 775 30.51 840 33.07
Center to
Class 150 C 90 3.54 105 4.13 166 6.53 175 6.88 210 8.26 250 9.84 310 UN340
12.20 385 15.15 428 16.85 545 21.45 655 25.78
Class 300 C 120 4.72 130 5.11 150 5.90 175 6.88 210 8.26 270 10.62 325 12.79 430 16.92 470 18.50 510 20.07 500 19.68 600 23.62
Bottom
Class 600 C 110 4.33 110 4.33 175 6.88 195 7.67 280 11.02 285 11.22 320 12.59 340 13.38 410 16.14 445 17.51 510 20.07 640 25.19
CLASS 150-300-600 REDUCED BORE - TRUNNION MOUNTED - FULL WELDED BALL VALVES
Integral flanges - End to End According to API 6D Flange Dimensions to ANSI B16.5
DN 50x40 80x50 100x80 150x100 200x150 250x200 300x250 350x300 400x350 450x400 500x450 600x550
FULL BORE
IN 2”x11/2” 3”x2” 4”x3” 6”x4” 8”x6” 10”x8” 12”x10” 14”x12” 16”x14” 18”x16” 20”x18” 24”x20”
mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in.
WSE Class 150 A 178 7.00 203 7.99 229 9.01 394 15.51 457 17.99 533 20.98 610 24.0 686 27.00 762 30.00 864 34.01 914 36.56 1067 42.00
WSE Class 300 cat. F1-CT-600 A 216 8.50 283 11.14 305 12.00 403 15.86 502 19.76 568 22.36 648 25.51 762 30.00 838 32.99 914 35.98 991 39.01 1143 45.00
WSE Class 600 A 292 11.49 356 14.01 432 17.00 559 22.00 660 25.98 787 30.98 838 32.99 889 35.00 991 39.01 1092 42.99 1194 47.00E1397T55.00
M N
PE22.83
Class 150 B 160 6.29 140 5.51 190 7.48 280 11.02 295 11.61 330 12.99 400 15.74 460 18.11 480 18.89 540 21.25
L O580 715 28.14
Center E
Class 300 B 175 6.88 200 7.87 240 9.44 280 11.02 295 11.61 330 12.99 420 16.53 465 18.30 545 R DE600V 23.62 620 24.40 734 28.89
E 21.45
to Top N D
Class 600 B 190 7.48 195 7.67 240 9.44 280 11.02 305 12.00 400 15.74 435 17.12 440 U
17.32 505 19.88 590 23.22 700 27.55 775 30.51
Class 150 C 70 2.75 90 3.54 105 4.13 166 6.53 175 6.88 210 8.26 250 9.84 310 12.20 340 13.38 385 15.15 428 16.85 545 21.45
Center to
Class 300 C 80 3.14 120 4.72 130 5.11 150 5.90 175 6.88 210 8.26 270 10.62 325 12.79 430 16.92 470 18.50 510 20.07 500 19.68
Bottom
Class 600 C 90 3.54 110 4.33 110 4.33 175 6.88 195 7.67 280 11.02 285 11.22 320 12.59 340 13.38 410 16.14 445 17.51 510 20.07
135
MATERIAL
CALOBRI valves are manufactured in a wide range of materials, supplied by the best available steel mills, forged by
well experienced forgeries with the most up to date equipment. All the materials can be certified in the chemical
composition and the mechanical characteristic.
136
MATERIAL
CALOBRI valves are manufactured in a wide range of materials, supplied by the best available steel mills, forged by
well experienced forgeries with the most up to date equipment. All the materials can be certified in the chemical
composition and the mechanical characteristic.
137
TRANSITION PIECES
Often for valves buried or installed underground their operation and the
accessibility to their auxiliary connections, need to be brought at ground
level.
This requires an extention of the stem and all the piping connections.
The extention always needs to be specified.
1- Drain extension
NOTE
1) Grease seat seal only on
request
2) Relief valve only on request
or if there is a liquid medium
Warranty Policy: CALOBRI products are warranted against defects in design, materials or workmanship. This warranty is limited to the use of our products as recommended and intended. This warranty applies for one year
from start-up, but not exceeding eighteen months after shipment, provided that the valves are stored in a protected environment, and it is limited to the replacement of defective parts only. Any modification performend on
CALOBRI products by any firm other than those authorized by CALOBRI in writing, negates the warranty.
138
NOTE
135
ENGINEERED BY CALOBRI TECHNICAL OFFICE
Fax +39.02.3281558
www.calobri.com