Professional Documents
Culture Documents
SDS VI CT Solution - Google Forms
SDS VI CT Solution - Google Forms
1. Email *
2. Name of Student *
https://docs.google.com/forms/d/1J5e9PTzo6RooFHWwrpfxXHkcORcfAmcdGgKZ3jbIoYo/edit 1/13
8/3/2021 Structural Design & Systems VI, Semester-VI
4. In a two way slab subjected to an ultimate load of 12 kN/m, compute the ultimate
moment if effective length is 3 m and coefficient of moment is 0.032 as per
IS456:2000. *
2.65 kNm
4.78 kNm
3.45 kNm
5.89 kNm
5. Calculate the value of nominal shear stress for a slab having width 1 m and effective
depth 120 mm. It is carrying a shear force (Vu) of 100 kN. *
0.55 MPa
0.83 MPa
0.33 MPa
0.93 MPa
https://docs.google.com/forms/d/1J5e9PTzo6RooFHWwrpfxXHkcORcfAmcdGgKZ3jbIoYo/edit 2/13
8/3/2021 Structural Design & Systems VI, Semester-VI
Cantilever slab
6 kNm
8 kNm
10 kNm
4 kNm
9. While calculating development length of slab having M25 grade concrete and Fe415
grade steel, bond stress is taken as *
2.24 MPa
1.18 MPa
3.64 MPa
1.4 MPa
https://docs.google.com/forms/d/1J5e9PTzo6RooFHWwrpfxXHkcORcfAmcdGgKZ3jbIoYo/edit 3/13
8/3/2021 Structural Design & Systems VI, Semester-VI
10. In a cantilever slab carrying uniformly distributed load, calculate the ultimate shear
(Vu) if ultimate load on the slab is 10 kN/m and effective length is 3 m. *
10 kN
30 kN
20 kN
15 kN
11. In a one way simply supported slab carrying uniformly distributed load, calculate
the ultimate shear (Vu) if ultimate load on the slab is 10 kN/m and effective length
is 3 m. *
10 kN
30 kN
20 kN
15 kN
12. In a one way simply supported slab subjected to an ultimate moment of 15 kNm
having an effective depth of 100 mm and 1 m width. Compute the area of main
steel for the slab if concrete used is M20 and steel is Fe415. *
369.26 mm2
259.47 mm2
410.79 mm2
459.46 mm2
https://docs.google.com/forms/d/1J5e9PTzo6RooFHWwrpfxXHkcORcfAmcdGgKZ3jbIoYo/edit 4/13
8/3/2021 Structural Design & Systems VI, Semester-VI
13. In a one way simply supported slab carrying uniformly distributed load, calculate
the ultimate moment if ultimate load on the slab is 10 kN/m and effective length is
3 m. *
10.25 kNm
12.46 kNm
11.25 kNm
15 kNm
14. A rectangular footing carries a load from column of 1350 kN. Size of footing is 2x
2.5 m. What will be the pressure exerted by soil below the footing? *
270 kN/m2
370 kN/m2
470 kN/m2
290 kN/m2
15. In the case of isolated reinforced concrete column footing of effective depth d
(two way shear) punching shear is checked at *
at face of column
https://docs.google.com/forms/d/1J5e9PTzo6RooFHWwrpfxXHkcORcfAmcdGgKZ3jbIoYo/edit 5/13
8/3/2021 Structural Design & Systems VI, Semester-VI
16. In the case of isolated reinforced concrete column footing of effective depth d,
one way shear is checked at *
at face of column
17. The amount of reinforcement for main bars in a slab, is based upon *
Rectangular columns is 4
Circular columns is 6
Octagonal columns is 8
https://docs.google.com/forms/d/1J5e9PTzo6RooFHWwrpfxXHkcORcfAmcdGgKZ3jbIoYo/edit 6/13
8/3/2021 Structural Design & Systems VI, Semester-VI
19. Calculate area of square footing using following data: Load on column= 1250 KN,
Bearing capacity of soil= 250 KN/m3 *
5.24 m2
5.65 m2
5.5 m2
4.5 m2
20. Calculate sides of square footing using following data: Load on column= 1250 KN,
Size of column= 450 mm x 450 mm, Bearing capacity of soil= 250 KN/m3. *
2.11, 2.11
2.87, 2.87
2.34, 2.34
2.5, 2.5
21. The main reinforcement of a R.C. slabs consist 10 mm bars at 100 mm spacing if it
is designed in to replace the 10 mm bars by 12 mm bars then spacing of 12 mm
bars should be *
120 mm
140 mm
144 mm
160 mm
https://docs.google.com/forms/d/1J5e9PTzo6RooFHWwrpfxXHkcORcfAmcdGgKZ3jbIoYo/edit 7/13
8/3/2021 Structural Design & Systems VI, Semester-VI
22. If the diameter of longitudinal bars of square column is 16 mm, the diameter of
lateral ties should not be less than *
4 mm
5 mm
6 mm
8 mm
23. The effective length of a R.C. column effectively held in position at both ends and
restrained against rotation at both ends *
0.65 L
0.75 L
2L
24. In a pedestal the factor by which the effective length should not exceed the least
lateral dimension is *
https://docs.google.com/forms/d/1J5e9PTzo6RooFHWwrpfxXHkcORcfAmcdGgKZ3jbIoYo/edit 8/13
8/3/2021 Structural Design & Systems VI, Semester-VI
aspect ratio
modular ratio
span/depth ratio
water/cement ratio
0.15% to 2%
0.8% to 4%
0.8% to 6%
0.8% to 8%
spacing of lateral ties cannot be more than 16 times the diameter of tie bar
none
https://docs.google.com/forms/d/1J5e9PTzo6RooFHWwrpfxXHkcORcfAmcdGgKZ3jbIoYo/edit 9/13
8/3/2021 Structural Design & Systems VI, Semester-VI
28. In a retaining wall, the portion of the base slab beneath backfill material is termed
as _____ *
Toe
Heel
Stem
None
29. If a three hinged parabolic arch carries a uniformly distributed load on its entire
span, every section of the arch resists *
compressive force
tensile force
shear force
bending moment
30. Which of the following situation is suitable for RCC Grid slab? *
https://docs.google.com/forms/d/1J5e9PTzo6RooFHWwrpfxXHkcORcfAmcdGgKZ3jbIoYo/edit 10/13
8/3/2021 Structural Design & Systems VI, Semester-VI
Pinned joints
Rigid joints
Free joints
No joints
https://docs.google.com/forms/d/1J5e9PTzo6RooFHWwrpfxXHkcORcfAmcdGgKZ3jbIoYo/edit 11/13
8/3/2021 Structural Design & Systems VI, Semester-VI
Girder
Space Frame
Dome
Portal Frame
Welding
Bolting
Threading
https://docs.google.com/forms/d/1J5e9PTzo6RooFHWwrpfxXHkcORcfAmcdGgKZ3jbIoYo/edit 12/13
8/3/2021 Structural Design & Systems VI, Semester-VI
20 mm
30 mm
40 mm
70 mm
Monolithic character
Forms
https://docs.google.com/forms/d/1J5e9PTzo6RooFHWwrpfxXHkcORcfAmcdGgKZ3jbIoYo/edit 13/13