Professional Documents
Culture Documents
SDS VI CT 2 Solution - Google Forms
SDS VI CT 2 Solution - Google Forms
1. Email *
2. Name of Student *
Total questions: 35
All questions carry equal marks
Total marks: 70
CLASS TEST
Duration: 50 minutes
None
https://docs.google.com/forms/d/1AMMza9WvIHRzzHdNta9x2g9f6y7YhsZ0IEesvmHITIY/edit 1/14
8/3/2021 STRUCTURAL DESIGN & SYSTEMS VI
4. In a two way slab subjected to an ultimate load of 12 kN/m, compute the 2 points
ultimate moment if effective length is 3 m and coefficient of moment is 0.032
as per IS 456:2000.
2.65 kNm
4.78 kNm
3.45 kNm
5.89 kNm
5. Calculate the value of nominal shear stress for a slab having width 1 m and 2 points
effective depth 120 mm. It is carrying a shear force (Vu) of 100 kN.
0.55 N/mm2
0.83 N/mm2
0.33 N/mm2
0.93 N/mm2
https://docs.google.com/forms/d/1AMMza9WvIHRzzHdNta9x2g9f6y7YhsZ0IEesvmHITIY/edit 2/14
8/3/2021 STRUCTURAL DESIGN & SYSTEMS VI
both
None
8. In a cantilever slab carrying uniformly distributed load, calculate the ultimate 2 points
6 kNm
8 kNm
10 kNm
4 kNm
9. In a cantilever slab carrying uniformly distributed load, calculate the ultimate 2 points
shear (Vu) if ultimate load on the slab is 10 kN/m and effective length is 3 m.
10 kN
30 kN
20 kN
15 kN
https://docs.google.com/forms/d/1AMMza9WvIHRzzHdNta9x2g9f6y7YhsZ0IEesvmHITIY/edit 3/14
8/3/2021 STRUCTURAL DESIGN & SYSTEMS VI
10. In a one way simply supported slab carrying uniformly distributed load, 2 points
calculate the ultimate shear (Vu) if ultimate load on the slab is 10 kN/m and
effective length is 3 m.
10 kN
30 kN
20 kN
15 kN
11. In a one way simply supported slab subjected to an ultimate moment of 15 2 points
kNm having an effective depth of 100 mm and 1 m width. Compute the area
of main steel for the slab if concrete used is M20 and steel is Fe415.
369.26 mm2
259.47 mm2
410.79 mm2
459.46 mm2
12. In a one way simply supported slab carrying uniformly distributed load, 2 points
calculate the ultimate moment if ultimate load on the slab is 10 kN/m and
effective length is 3 m.
10.25 kNm
12.46 kNm
11.25 kNm
15 kNm
https://docs.google.com/forms/d/1AMMza9WvIHRzzHdNta9x2g9f6y7YhsZ0IEesvmHITIY/edit 4/14
8/3/2021 STRUCTURAL DESIGN & SYSTEMS VI
13. A rectangular footing carries a load from column of 1350 kN. Size of footing 2 points
is 2 x 2.5 m. What will be the pressure exerted by soil below the footing
270 kN/m2
370 kN/m2
470 kN/m2
290 kN/m2
14. In the case of isolated reinforced concrete column footing of effective 2 points
at face of column
15. In the case of isolated reinforced concrete column footing of effective 2 points
at face of column
https://docs.google.com/forms/d/1AMMza9WvIHRzzHdNta9x2g9f6y7YhsZ0IEesvmHITIY/edit 5/14
8/3/2021 STRUCTURAL DESIGN & SYSTEMS VI
16. The amount of reinforcement for main bars in a slab, is based upon 2 points
17. The minimum number of main steel bars provided in R.C.C. 2 points
Rectangular columns is 4
Circular columns is 6
Octagonal columns is 8
18. Calculate area of square footing using following data: Load on column= 2 points
5.24 m2
5.65 m2
5.5 m2
4.5 m2
https://docs.google.com/forms/d/1AMMza9WvIHRzzHdNta9x2g9f6y7YhsZ0IEesvmHITIY/edit 6/14
8/3/2021 STRUCTURAL DESIGN & SYSTEMS VI
19. Calculate sides of square footing using following data: Load on column= 2 points
2.11, 2.11
2.87, 2.87
2.34, 2.34
2.5, 2.5
20. When is an R.C.C roof slab designed as a two way slab ? 2 points
21. The reinforced concrete cantilever porch has thickness 't', the main 2 points
reinforcing steel will be placed
at mid thickness
https://docs.google.com/forms/d/1AMMza9WvIHRzzHdNta9x2g9f6y7YhsZ0IEesvmHITIY/edit 7/14
8/3/2021 STRUCTURAL DESIGN & SYSTEMS VI
22. The main reinforcement of a R.C. slabs consist 10mm bars at 100mm 2 points
spacing if it is designed in to replace the 10mm bars by 12mm bars then
spacing of 12mm bars should be
120mm
140 mm
144 mm
160mm
23. If the diameter of longitudinal bars of square column is 16 mm, the diameter 2 points
of lateral ties should not be less than
4 mm
5 mm
6 mm
8 mm
24. What is the value of minimum reinforcement in slab (in case of Fe415)? 2 points
0.1%
0.12%
0.15%
0.2%
https://docs.google.com/forms/d/1AMMza9WvIHRzzHdNta9x2g9f6y7YhsZ0IEesvmHITIY/edit 8/14
8/3/2021 STRUCTURAL DESIGN & SYSTEMS VI
25. The effective length of a R.C. column effectively held in position at both 2 points
0.65 L
0.75 L
2L
26. The diameter of main (longitudinal) bars in RCC columns shall not be less 2 points
than
6 mm
8 mm
10 mm
12 mm
27. The column is regarded as long column if the ratio of its effective length and 2 points
lateral dimension exceeds
20
12
15
17
https://docs.google.com/forms/d/1AMMza9WvIHRzzHdNta9x2g9f6y7YhsZ0IEesvmHITIY/edit 9/14
8/3/2021 STRUCTURAL DESIGN & SYSTEMS VI
28. An RCC column is treated as short column if its slenderness ratio is less than 2 points
20
12
15
17
29. In a pedestal the factor by which the effective length should not exceed the 2 points
least lateral dimension is
bending moment
shear
https://docs.google.com/forms/d/1AMMza9WvIHRzzHdNta9x2g9f6y7YhsZ0IEesvmHITIY/edit 10/14
8/3/2021 STRUCTURAL DESIGN & SYSTEMS VI
spacing of lateral ties cannot be more than 16 times the diameter of tie bar
None
0.15% to 2%
0.8% to 4%
0.8% to 6%
0.8% to 8%
https://docs.google.com/forms/d/1AMMza9WvIHRzzHdNta9x2g9f6y7YhsZ0IEesvmHITIY/edit 11/14
8/3/2021 STRUCTURAL DESIGN & SYSTEMS VI
20 mm
30 mm
40 mm
70 mm
35. Identify the type of retaining wall in the figure shown below. 2 points
https://docs.google.com/forms/d/1AMMza9WvIHRzzHdNta9x2g9f6y7YhsZ0IEesvmHITIY/edit 12/14
8/3/2021 STRUCTURAL DESIGN & SYSTEMS VI
36. In the figure shown below of a grid floor slab, The width of the solid area 2 points
around the column should be ______ of the span between columns.
1/2
1/4
1/8
https://docs.google.com/forms/d/1AMMza9WvIHRzzHdNta9x2g9f6y7YhsZ0IEesvmHITIY/edit 13/14
8/3/2021 STRUCTURAL DESIGN & SYSTEMS VI
37. Identify the type of structural member in the figure given below. 2 points
Portal frame
Composite structure
Space structure
Forms
https://docs.google.com/forms/d/1AMMza9WvIHRzzHdNta9x2g9f6y7YhsZ0IEesvmHITIY/edit 14/14