Professional Documents
Culture Documents
Assignement - 1 - MATLAB Buck Converter
Assignement - 1 - MATLAB Buck Converter
MATLAB
Abstract: This assignment centers around the development of a buck converter utilizing a Texas
Instruments (TI) Delfino F280049C development board. The initial step involves calculating all
essential parameters, including the inductor and capacitor values required for the buck converter. For
example, to design a 6-volt buck converter from a 12-volt supply, it is crucial to determine the
appropriate inductor and capacitor values for the design. Subsequently, need these values to design
the buck converter in MATLAB.
Materials Required:
1. MATLAB/Simulink.
2. TI Delfino F280049C development board.
Tasks:
1. Calculate the values for the inductor and capacitor based on input and output
voltages.
2. Implement the open-loop buck converter model in MATLAB/Simulink.
3. Implement closed-loop control for the DC-DC buck converter using a selected
method, such as PID.
4. Design the closed-loop control of a DC-DC buck converter using the TI Delfino
F280049C in MATLAB/Simulink.
Reference:
1. https://in.mathworks.com/help/sps/ug/buck-converter.html
2. https://www.youtube.com/watch?v=sytkrqLa2bk
3. https://in.mathworks.com/help/ti-c2000/ug/dc-dc-buck-converter.html