Professional Documents
Culture Documents
129 95 224
2
ORGANIZATION: GAZETTED
% Vac. In
Sanctioned
Posts MOR Vac. Sanctioned
Strength
Strength
Supervisor 99 85 24 14.14
4
PERFORMANCE
S. 2019-20 2020-21
Parameter % Imp/Det
No. (Up to Feb) (Up to Feb)
Punctuality loss
2 111 23 79.28
( Incidences)
Reconciled Failure/100
3 30.41 20.1 33.90
locos/Month
2315
(including
5 Training Man days 2304 0.48
online
Webinars)
5
LOCO HOLDING BREAK-UP
62 49 44 13 168
(Prop-35) (Prop-29) (Prop-22) (Prop-13) (Prop-99)
7
65th RAILWAY WEEK GM AWARD -2019 -20
11
PROVISION OF CVVRS CREW VOICE AND VIDEO
RECORDING SYSTEM
2 nd PRIZE
Winner for Suggestion Scheme of
Best Innovation 2019
DUAL SHUNTING MODE LOCO - SARTHI
15
CDAC TCN VCU TEST SETUP
Electric loco shed Tuglakabad developed test jig for testing DIO cards of
CDAC TCN based vehicle control unit with help of D413 tool and CDAC
VCU Rack. DIO (digital input output ) cards receives various digital signal
(e.g. Panto status, VCB status etc) and gives desired output signals (e.g.
VCB ON/Off command, Panto Raising command etc) based on the logic
performed in processor cards.
The Shed is testing DIO cards of locomotives given trouble on line and
till date 10 cards found defective. At present this Setup is for testing DIO
but it will be extendable for other cards also. The same was agreed to by
16
the concerned firm in joint checking with Shed representatives.
TEST BENCH FOR HIGH-REACH
PANTOGRAPH
19
PROVISION OF OHE SENSOR IN INSPECTION PIT
RED Bulb - OHE Live Position GREEN Bulb - OHE Isolate Position
20
HOG WORKING AND PHASE SEQUENCE TESTING
UNIT
21
HYDRAULIC JACK ARRANGEMENT FOR AXLE BOX
AND DRAFT GEAR
For axle box attention in 3 Phase loco, the loco had to be partially
lifted and it entailed opening of bellow, sensor, brake rigging of that
wheel, damper etc. and it took around 16 hours.
Now this shed is using Hydraulic Jack to check/attend the axle box
and do not required opening of bellow, sensor, brake rigging of that
wheel,, damper etc. also and loco given ready only 04 hours.
We can attend two axle boxes at same time. It saves both time and
man power.
The same arrangement is also used for dropping the CBC draft gear
without damaging the yoke of CBC. 22
PIVOT HOUSING CHANGING ARRANGEMENT
23
DEVELOPMENT OF NEW PARK
24
DEVELOPMENT OF NEW PARK
25
COVID-19 – THE WAY AHEAD
staggered.
being adhered.
26
Thermal
Screening at
Shed Entrance
28
Social distancing & Self Protection During Regular Work
29